How beautiful to tie a ribbon on a Christmas tree toy. Christmas tree bows made of paper, ribbons and beads: step by step instructions. Before starting work, you need to stock up

Every year, under New Year all residents of our country are engaged in one IMPORTANT occupation - each decorate his christmas tree! To facilitate this task, sales of all kinds of New Year's toys are gaining momentum in the supermarkets of our country: balls, stars, houses, cones, animals, snowflakes, bows and even fairy-tale characters ... there is no counting!

Some Christmas trees will be decorated in a strict design style, others will be full of all kinds of toys, others - only rare collections ...

This is all good, but you must admit how pleasant it is to do Christmas toys with your own hands, in the bosom of your family, saturated with emotions and fun of loved ones! This effect will not bring any purchased toy!

Our site brings to your attention a very beautiful New Year's craft with your own hands - a chic fluffy bow on the Christmas tree, made with your own hands from ribbons!

Such bows can be made in a wide variety of colors and sizes. This Christmas tree decoration will perfectly fit into any style, be it a strict one, consisting of just such bows, or a cheerful children's one, where bows are a fun addition to a great variety of New Year's toys.

A very big "plus" of such ribbon bows for the Christmas tree is that they are made very quickly! In any hour, you can make a dozen of these ornaments!

Why are there so many bows? Well, firstly, your tree can only be decorated with ribbon bows, and secondly, with the help of such bows you can make any New Year's wish, rolled up and inserted into a festive bright bow, and thirdly - Christmas costumes, the table and the room can also be decorated with funny bows! However, depending on the application, adjust the size of the bow itself!

Let's start our master class as soon as possible and you will learn all the stages of creating such a Christmas tree decoration.

Prepare and place in front of you:

  • Sharp scissors;
  • Bright ribbon 5 cm wide;
  • Ribbon 2.5 cm wide;
  • Thin ribbon only 0.5 cm wide;
  • A needle with thread to match the ribbons;
  • An ordinary lighter.
  • A piece from the widest tape (5 cm) 15 cm long - 4 pieces;
  • Cuts from a medium-sized tape (2.5 cm) 15 cm long - 5 pieces;

We select four ribbons of each width, carefully lay a narrow ribbon on a wide one, and align it strictly in the center!

And now we are faced with a very important task: to ensure a tight fastening of two overlaid ribbons to one another and to take measures to avoid loosening of the ribbons' cuts! An ordinary lighter will help us with this! Thanks to her intervention, we will kill two birds with one stone with a slight movement of our hand - we will get rid of the loosening and "fuse" the ribbons together!

This is done as follows: we bring the lighted lighter to the edges of the ribbons and move it up and down - the edges begin to melt and burn (we do not let it burn, we blow it out). We should get a smooth fused cut:

We fold our strip blanks in half. It's time to put all the details of our bow together.

We carefully tighten it on a thread, fasten it - we got this kind of workpiece:

As you remember, we have one more piece of tape, 2.5 cm wide, left unused. Its time has come. We put this segment in front of us, visually mark its middle and sew along this line with the already familiar overcasting seam:

And now let's remember one more tiny ribbon! With this ribbon. With a width of only 0.5 cm, we will carefully tie a bow in the center, arrange the middle, tie a loop - BANT ON A Christmas tree DIY, completely ready!

Think. That your collection will not be limited to one bow, and the included imagination will work with a vengeance, especially when you see the result of your work:

How to decorate a Christmas tree with bows, photo

Every year, on New Year's Eve, all residents of our country are busy with one IMPORTANT activity - each decorate his own New Year tree! To facilitate this task, sales of all kinds of New Year's toys are gaining momentum in the supermarkets of our country: balls, stars, houses, cones, animals, snowflakes, bows and even fairy-tale characters ... there is no counting!

Some Christmas trees will be decorated in a strict design style, others will be full of all kinds of toys, others - only rare collections ...

This is all good, but you must admit how pleasant it is to make New Year's toys with your own hands, with your family, saturated with emotions and fun of loved ones! Not a single purchased toy will bring such an effect!

Our site brings to your attention a very beautiful New Year's craft with your own hands - a chic fluffy bow for a Christmas tree, made with your own hands from ribbons!

Photo of decorating a Christmas tree with bows

Such bows can be made in a wide variety of colors and sizes. This Christmas tree decoration will perfectly fit into any style, be it a strict one, consisting of some of these bows, or a cheerful children's one, where bows are a fun addition to a great variety of New Year's toys.

A very big "plus" of such ribbon bows for the Christmas tree is that they are made very quickly! In any hour, you can make a dozen of these ornaments!

Why are there so many bows? Well, firstly, your Christmas tree can only be decorated with ribbon bows, and secondly, with the help of such bows you can make any New Year's wish rolled up and inserted into a festive bright bow, and thirdly, New Year's costumes, a table and a room can be also decorate with fun bows! However, depending on the application, adjust the size of the bow itself!

DIY bow on the tree, master class

Let's start our master class as soon as possible and you will learn all the stages of creating such a Christmas tree decoration.

Prepare and place in front of you:

  • Sharp scissors;
  • Bright ribbon 5 cm wide;
  • Ribbon 2.5 cm wide;
  • Thin ribbon only 0.5 cm wide;
  • A needle with thread to match the ribbons;
  • An ordinary lighter.

To make one bow, you need to cut the prepared ribbons into small pieces:

  • A piece from the widest tape (5 cm) 15 cm long - 4 pieces;
  • Cuts from a medium-sized tape (2.5 cm) 15 cm long - 5 pieces;

We select four ribbons of each width, carefully lay a narrow ribbon on a wide one, and align it strictly in the center!

And now we are faced with a very important task: to ensure a tight fastening of two overlaid ribbons to one another and to take measures to avoid loosening of the ribbons' cuts! An ordinary lighter will help us with this! Thanks to her intervention, we will kill two birds with one stone with a slight movement of our hand - we will get rid of the loosening and "fuse" the ribbons together!

This is done as follows: we bring the lighted lighter to the edges of the ribbons and move it up and down - the edges begin to melt and burn (we do not let it burn, we blow it out). We should get a smooth fused cut:

Check out what the four presets should look like:

We fold our strip blanks in half. It's time to put all the details of our bow together.

We use a regular basting seam for assembly, this is how it should look:

We carefully tighten it on a thread, fasten it - we got this kind of workpiece:

As you remember, we have one more piece of tape, 2.5 cm wide, left unused. Its time has come. We put this segment in front of us, visually mark its middle and sew along this line with the already familiar overcasting seam:

You don't need to cut the thread, just sew the ribbon to the finished piece.

And now let's remember one more tiny ribbon! With this ribbon. With a width of only 0.5 cm, we will carefully tie a bow in the center, arrange the middle, tie a loop - BANT ON A Christmas tree DIY, completely ready!

Think. That your collection will not be limited to one bow, and the included imagination will work with a vengeance, especially when you see the result of your work:

Imagine, dare, be creative ... luck is on your side!

Having trouble finding a specific video? Then this page will help you find the video you need so much. We will easily process your requests and give you all the results. No matter what you are interested in and what you are looking for, we can easily find the necessary video, no matter what direction it is.


If you are interested in up-to-date news, then we are ready to offer you the most relevant on this moment news reports in all directions. The results of football matches, political events or world, global problems. You will always be aware of all the events if you use our wonderful search. The awareness of the videos we provide and their quality does not depend on us, but on those who uploaded them to the Internet. We just supply you with what you are looking for and demand. In any case, using our search, you will know all the news in the world.


However, the world economy is also quite interesting topic, which worries so many. Quite a lot depends on the economic condition of various countries. For example, import and export of any food products or equipment. The same standard of living directly depends on the state of the country, as well as salaries and so on. How can such information be useful? It will help you not only adapt to the consequences, but can also warn you against traveling to one country or another. If you are a notorious traveler, then be sure to use our search.


Nowadays it is very difficult to understand political intrigues and to understand the situation you need to find and compare a lot of different information. Therefore, we can easily find for you various speeches of the State Duma deputies and their statements for all the past years. You can easily understand politics and the situation in the political arena. The politics of different countries will become clear to you and you can easily prepare yourself for the coming changes or adapt already in our realities.


However, you can find here not only various news from the whole world. You can also easily find yourself a film that will be pleasant to watch in the evening with a bottle of beer or popcorn. In our search database there are films for every taste and color, you can easily find an interesting picture for yourself. We can easily find for you even the oldest and most difficult to find works, as well as the classics known to all - for example, Star Wars: The Empire Strikes Back.


If you just want to relax a little and are in search of funny videos, then we can quench your thirst here too. We will find for you a million different entertaining videos from all over the planet. Short jokes will easily cheer you up and will amuse you the whole day. Using the convenient search system, you can find exactly what will make you laugh.


As you already understood, we work tirelessly so that you always get exactly what you need. We have created this wonderful search especially for you, so that you could find the necessary information in the form of a video and watch it on a convenient player.

DIY Christmas tree: 25 master classes on creating a New Year's beauty!

In the fall, more and more often you begin to think about the coming of the New Year with its festive mood, meetings with friends and family and, of course, gifts. In addition, we all associate the New Year with the Christmas tree since childhood! Let's talk about it) Fortunately, people are increasingly thinking about what is not worth cutting live tree for the sake of a few holidays.

Krestik and I fully support this decision and believe that a Christmas tree with our own hands is much more interesting and humane!

In addition, these are excellent options for those who have nowhere to put a large Christmas tree (for example, there is no free space, or an active little child on this free space).

How to make a bow on a Christmas tree with your own hands

  • Good time of the day! I want to present my photo master class "DIY bow on the Christmas tree."
  • Photo 1. For making bows I used:
  • - ribbons (5 cm wide, 2.5 cm and 0.5 cm wide)
  • - needle
  • - threads
  • - scissors
  • - lighter
  • Photo 3 Next, I put a narrow tape on a wide one exactly in the middle, and then melted the edges with a lighter so that it would not fall off. And in this way, the two tapes are soldered together.
    • Photo 10.

I took a tape (0.5 cm wide) and made a loop. The edges of the lower ribbon were cut obliquely and singed with a lighter.

    • Photo 11-14. A handmade bow on a Christmas tree is ready!

I hope you enjoyed my master class and such a New Year's bow will decorate the Christmas trees of every needlewoman.

20 ideas on how to decorate a Christmas tree

1. Natural or artificial spruce will be diversified by golden figurines of butterflies and birds in combination with red balls and a paper cap of Santa Claus instead of the top. Simple paper garlands perfectly complement the Christmas tree decor.

2. New Year's decor in the style of the snow kingdom will perfectly fit into any interior.

It is important to complement such a Christmas tree decoration with decorative items and decorations to match the Christmas tree around the entire perimeter of the room.

How to make bows on a Christmas tree with your own hands - original ideas, master classes, photo

Today, many people prefer to decorate the branches of the forest beauty not with purchased figurines, but with their own hand-made New Year's decor.

Today we will figure out how to make bows on a Christmas tree with our own hands? With the help of our master classes, you will create real masterpieces of applied art.

  1. rep tape 9 mm
  2. scissors
  3. thread with a needle
  4. fabric tape (plaid) 25 mm
  5. lighter
  6. clamps
  7. template - cardboard rectangle with a slot in the middle
  8. glue gun

Ribbon bows can be used to decorate not only a Christmas tree, but also Greeting Cards and a box with a New Year's gift.

DIY ribbon bow on a Christmas tree

Last year I came across very beautiful wide shiny ribbons in the store. I bought them in two colors - silver and gold.

I tied the bows and hung them on the tree.

It turned out to be so stylish and original, I also bribed silver beads that my Christmas tree toys remained in the boxes. I found a Christmas tree with bows, under the cut there are three ways of tying bows.

Maybe someone will come in handy? By the way, bows are also useful for New Year's packaging gifts :) Do you know what thermosets are.


Before you buy a tape, you should decide on its texture and color.

It is best to choose a material that matches the balls. As for quality, you can use the standard version - satin ribbons.

Of course, for many beginners, this fabric may seem too slippery. Therefore, to make bows on a Christmas tree with your own hands, you can use a rougher material.

And here we will tell and show the main methods and options for tying various bows to decorate gift wrapping.

It is always better to emphasize the beauty and originality of the wrapped gift with the help of various bows.

The most famous bows today: French classic bow. korean bow, bow ball. boat bow, flat bow, as well as popular rose bows. You can learn how to make all bows and roses made of fabric, fabric or synthetic ribbons yourself by looking at our simple tutorials with a pattern-diagram and a photo with options for making bows from various decorative materials.

What is the best way to decorate a Christmas tree in the Year of the Horse?

Soon, very soon we will be decorating the Christmas trees! Let's do this, taking into account the preferences of the symbol of the coming year - an economic and neat Horse. Suddenly she will take into account ours. -) What do we want in the New Year?

Happiness, love, wealth? Then, when dressing up the tree, take care of the appropriate paraphernalia. And of course, do this pleasant thing with joy and love. Then it is likely that the hostess of the year will reciprocate your feelings.

DIY ribbon bow on a Christmas tree
DIY Christmas tree: 25 master classes on creating a New Year's beauty! In the fall, more and more often you begin to think about the coming of the New Year with its festive

Source: urvrn.ru

The tradition of hanging lush red bows on the Christmas tree came to us from Europe.

The Christmas tree decorated with satin bows looks very elegant and stylish.

Their traditional types, that is, ordinary single bows, have become very popular.


However, you can decorate the tree with other options: for example, beautiful double bows or even large gift bows.

The choice of their color will depend on the overall colors festive interior.

A very big "plus" of such ribbon bows for the Christmas tree is that they are very quickly made. In any hour, you can make a dozen of these ornaments!

Do-it-yourself Christmas tree bows can be made from both satin ribbons and colored paper, as well as candy wrappers or foil.

In order for the bows on the Christmas tree to be beautiful and bright with your own hands, they should be decorated with beads and various beads.

On the subject: how to decorate a Christmas tree with beads

The decor can not only be sewn on, but also glued with special glue.

Colored bows of various “calibers” look charming on the tree, giving it a festive elegance.

But, decorating the tree with bows, do not frequent, because we need to leave room for cones, fruits and toys. However, lovers of originality can refuse other decorations.


The bows themselves can be done like this:

1. Tie right on spruce branches transparent corrugated organza ribbons with the long ends down as you can see in the photo.

2. Take soft satin ribbons and tie a bow. Sew a shiny button in the center of each and wrap thin Christmas tree beads around the buttons. You will get beautiful Christmas tree bows with beaded pendants.

3. Out of the bright gift paper cut into squares, tie them in the middle of a thin satin ribbon, which you tie with a bow. The end result is adorable double bows.

Here you can "play" with flowers: create elegant monochromatic bows or bright colored ones, as you like.

This simple but very cute decoration will also come in handy when decorating a hall, so create more of them.

Flowers from decorative ribbons used to decorate bouquets will look very organically on the tree.

If you have them, place them next to the bows for a wonderful harmonious combination.



Another original version decorating a Christmas tree with bows is that children's bows are carefully unwound in length and hung on the branches of the Christmas tree in the form of festive tinsel.

You can staple several bows together to create a large ribbon.

And so that the attachment points of the bows are not visible, hang several small satin bows size.

Bows do not have to be an addition to any decoration. They themselves look very beautiful.

You can choose just such an "outfit" for the Christmas tree and use bows made of ribbons and fabrics of red, gold or patterned for this.

Bows to match will look great Christmas balls... Fit like simple options New Year's bows, and multilayer, with intricate knots.

Decorating a Christmas tree with bows of various colors and sizes will fit perfectly into any style, be it a strict one, consisting of just such bows, or a cheerful children's one, where bows are a nice addition to a great variety of New Year's toys.

How to decorate a Christmas tree with bows, photo



Every year, on New Year's Eve, all residents of our country are busy with one IMPORTANT activity - each decorate his own New Year tree! To facilitate this task, sales of all kinds of New Year's toys are gaining momentum in the supermarkets of our country: balls, stars, houses, cones, animals, snowflakes, bows and even fairy-tale characters ... there is no counting!

Some Christmas trees will be decorated in a strict design style, others will be full of all kinds of toys, others - only rare collections ...

This is all good, but you must admit how pleasant it is to make New Year's toys with your own hands, with your family, saturated with emotions and fun of loved ones! Not a single purchased toy will bring such an effect!

Our site brings to your attention a very beautiful New Year's craft with your own hands - a chic fluffy bow for a Christmas tree, made with your own hands from ribbons!

Photo of decorating a Christmas tree with bows

Such bows can be made in a wide variety of colors and sizes. This Christmas tree decoration will perfectly fit into any style, be it a strict one, consisting of some of these bows, or a cheerful children's one, where bows are a fun addition to a great variety of New Year's toys.



A very big "plus" of such ribbon bows for the Christmas tree is that they are made very quickly! In any hour, you can make a dozen of these ornaments!

Why are there so many bows? Well, firstly, your Christmas tree can only be decorated with ribbon bows, and secondly, with the help of such bows you can make any New Year's wish rolled up and inserted into a festive bright bow, and thirdly, New Year's costumes, a table and a room can be also decorate with fun bows! However, depending on the application, adjust the size of the bow itself!

DIY bow on the tree, master class

Let's start our master class as soon as possible and you will learn all the stages of creating such a Christmas tree decoration.

Prepare and place in front of you:

  • Sharp scissors;
  • Bright ribbon 5 cm wide;
  • Ribbon 2.5 cm wide;
  • Thin ribbon only 0.5 cm wide;
  • A needle with thread to match the ribbons;
  • An ordinary lighter.

To make one bow, you need to cut the prepared ribbons into small pieces:

  • A piece from the widest tape (5 cm) 15 cm long - 4 pieces;
  • Cuts from a medium-sized tape (2.5 cm) 15 cm long - 5 pieces;


We select four ribbons of each width, carefully lay a narrow ribbon on a wide one, and align it strictly in the center!

And now we are faced with a very important task: to ensure a tight fastening of two overlaid ribbons to one another and to take measures to avoid loosening of the ribbons' cuts! An ordinary lighter will help us with this! Thanks to her intervention, we will kill two birds with one stone with a slight movement of our hand - we will get rid of the loosening and "fuse" the ribbons together!

This is done as follows: we bring the lighted lighter to the edges of the ribbons and move it up and down - the edges begin to melt and burn (we do not let it burn, we blow it out). We should get a smooth fused cut:

Check out what the four presets should look like:

We fold our strip blanks in half. It's time to put all the details of our bow together.

We use a regular basting seam for assembly, this is how it should look:

We carefully tighten it on a thread, fasten it - we got this kind of workpiece:

As you remember, we have one more piece of tape, 2.5 cm wide, left unused. Its time has come. We put this segment in front of us, visually mark its middle and sew along this line with the already familiar overcasting seam:


You don't need to cut the thread, just sew the ribbon to the finished piece.

And now let's remember one more tiny ribbon! With this ribbon. With a width of only 0.5 cm, we will carefully tie a bow in the center, arrange the middle, tie a loop - BANT ON A Christmas tree DIY, completely ready!

Think. That your collection will not be limited to one bow, and the included imagination will work with a vengeance, especially when you see the result of your work:

Imagine, dare, be creative ... luck is on your side!

An elegant bow for a Christmas tree, for decor or hair.

Materials and tools for the Christmas tree bow master class

To make a bow, I needed:
- Tape fabric plaid 25 mm;
- rep tape 9 mm;
-scissors;
-lighter;
-sample;
-glue gun;
-clips;
-needle with thread.

Instructions:

In the previous master class, I told how to make a Christmas tree from ribbons, and now we will practice making a bow to decorate its top. Here are the tools and materials we need.


Cut off two pieces of 24-25 cm from the plaid tape, mark the middle.


We sew our bow in the middle, remove it from the cardboard, tighten it, wrap it several times and fix the thread. We make the second bow in the same way.

This is how we get it.


We decorate the ends beautifully: for this we fold the tape in half, cut the corner diagonally and immediately process it with a lighter.

Now we take any beautiful 9 mm ribbon, not necessarily reps, like mine, and make out the middle of the bow, securing the ends from the inside with a glue gun. Then we glue our two bows in the upper part like a pyramid. Then we squeeze out the glue inside our pyramid and put it on the top of the Christmas tree. Remove excess glue immediately.

Such a bow will serve as a decorative element not only for the Christmas tree, it will be possible to decorate a postcard with it (only make it smaller) or gift box... Or you can glue it to a clip or elastic and use it to decorate your hair.