Posted On 02.11.2017

You don’t always have ready-made decorations for gifts or beautiful packaging tapes at hand. What to do if you want to make the gift wrapping beautiful? Make a bow yourself from scrap materials, namely paper. How to make a paper bow which can be used to decorate a gift? You just need a little patience and effort.

Curls can be not only on the top of the head

Do original cascade of curls You can get regular paper, preferably very thin. We cut a sheet of paper into thin strips, up to 1-1.5 cm, and then with the blunt side of the scissors we give them the shape of curls, running along one side of the paper. Curls form instantly. For this purpose, you can use regular wrapping paper. Having made the required number of curls, we fasten them with a stapler and attach them to the gift, gluing them or securing them in a similar way. The curls can be located either around the perimeter of the box or falling from the central part.

How to make a butterfly out of paper?

To make a butterfly bow, you will need two types of paper. One is denser and brighter (it could be a photograph from a magazine), the second should be one and a half to two times smaller and depict the body of a butterfly. We make the most ordinary fan from a larger leaf. From the small one we make a fan in the same way, trying to keep the folds the same. We divide the fan into three parts and slightly cut it on the right and left sides, retreating from the edge by 2-5 cm (depending on the size of the sheet). We place the smaller one on the larger sheet: so that the folds coincide and in the central part we press and tie the two parts together. Gently straighten it, giving it a fluffy shape - and the butterfly is ready. To make the product more eye-catching, it makes sense to use old magazines with pictures, fashion catalogs and others with brightly colored paper.

Bow Dior

Not regular bow can be done by preparing four rings of decreasing diameter. The smallest one should be such that it takes up no more than 50% of the width of the last ring. The rings need to be slightly overlapped, the upper and lower central parts should be glued in the same way. The rings also need to be glued, placing one in the middle of the other, and using a narrow paper tape to connect them across perpendicularly, thus obtaining original decoration. The tape is taken of one color, but to give some contrast it is worth taking a transverse piece of paper of a different shade.

As for the Dior bow, you can connect its two halves together, getting a more lush and voluminous inflorescence. It will look very beautiful and unusual.

Original paper chrysanthemum

To get an original and lush chrysanthemum, you need to take paper of a bright or light color (for example, pink or bright red) and cut out ten to fifteen polygons. They should be in the shape of hexagons or look like flags, but in such a way that they are all fastened together. We stack the cut out figures on top of each other and pin them on top with a pin or a needle with a tip, the top of which can be shaped like a pestle by putting on a white or yellowish cap. It turns out gorgeous paper flower.

Combinations with paper ribbons and curls

Can be done quickly and easily original decoration with curls. We cut out four strips of paper in the form of thin and long ribbons, the ends of which we give an unusual shape, for example, like a flag, in the form of the letter “V”. We place two ribbons side by side on the box or packaging with a gift (with a small interval), cover them on top in the same way with two of the same ribbons and glue them together at the joints. On top of the glued tapes we attach other pieces of paper, similar in width, placing them perpendicularly. In total you will need four segments. We run the blunt edge of the scissors along the last attached pieces of paper tape, giving them a curl shape. That's it: the decoration is ready.

In the same way, you can experiment with the color of ribbons, using, for example, white and scarlet pieces of paper, creating compositions from thin and thick curlicue rings. Or by putting such curls into rings of larger diameter.

How to make a simple and original bow?

A beautiful multi-color paper bow is made if you take eight pieces each papers of three shades of the same length but different widths. You can take the following colors, for example: the widest stripe is blue, the narrower stripe is purple, and the top stripe is pale pink. Glue strips of paper on top of each other. We bend the edges of the strips in the form of an envelope, connect them together and form two inflorescences in the form of a trefoil. Let's connect them together. Attach thin bows to the central part of the decoration. They should be done like this: cut very thin strips the thickness of a straw, which should be glued into a ring and then additionally connected in the center, getting a tiny bow.

To the resulting decoration, you can glue a thicker ring on top of the thin bows, which will crown the central part. You can attach two ribbons from the bottom, from the wrong side.

Most importantly, when creating paper jewelry, don't be afraid to experiment. After all, you can create compositions by unusually combining curls, ribbons, diamonds and irregular polygons, bows and fans. The main task of such jewelry is to add a certain zest to the gift being given, to the interior, or even fancy dress. A little strength and patience - and everything will work out!

How to make (tie) a gift bow(s) from ribbons

Bow from satin ribbon DIY for decoration

DIY satin ribbon bow for a gift

How to do beautiful bow DIY gift

How to tie a bow beautifully. Classic bow

HOW TO TIE A BOW master class, diagrams with photos

DIY two-color ribbon bow. Simple, strict and

Home Hobbies

Is it difficult to imagine a solemn moment without decoration or decoration with elegant bows? Lush and strict, elegant and frivolous - they create a special mood at the holiday. Making a hair clip or a butterfly for an evening suit from satin ribbons is not difficult if you follow the instructions.

How to make bows from satin ribbons

The technology for assembling the decoration requires ribbons of different colors and special widths in accordance with your idea. A minimum set of tools and materials for manufacturing will be required. If you complete the master class, you will not have a question about how to make a bow from a satin ribbon. The proposed step-by-step instructions will make the work process enjoyable and understandable.

How to tie a ribbon bow

You will need:

• lighter;
• scissors;
• threads;
• needle;
• ruler;
• glue or heat gun.

Depending on the purpose of the bow, there are various options for manufacturing technologies. He can be:

• small, made using a fork - suitable for decorating a postcard;
• lush, elegant - in the kanzashi style - for a holiday in kindergarten;
• a formal bow tie for an important banquet;
• double – for hair decoration, attached to a headband or hairpin,
• solemn - on a gift box.

Satin bows can be made in the form original flower. If you choose the right color and shape, they will become unique decorations:

• elegant evening dress;
• frivolous sundress;
• styled hair;
• in the form of a wrist bracelet;
• stylish handbag;
• bridesmaid dresses;
• smart blouse;
• as a neck pendant;
• furniture in the interior;
• stylish dress on prom;
• curtains in the apartment.

How to make a bow from a satin ribbon in a classic style

The most popular and simple, this bow is used for clothing and interior decoration. Even a modest gift decorated in this way becomes elegant, solemn and attractive. To tie a bow you will need:

• take a piece 20 cm long;
• burn the edges;
• fold in half with the smooth side facing in;
• fold the edges outward again;
• take it in your hands so that each has a loop at the top, and a bend between them at the bottom;
• cross the folded parts in front, forming a ring under them;
• pass one loop through it, tie.

A strict beautiful bow made of satin ribbon with your own hands

You can tie a strict stylish bow for a special occasion. It will become a decoration handbags, dress or gift. Here it is important to choose the right colors for the craft so that it looks elegant. How to make a bow from a satin ribbon, for example, like the one in the photo. Prepare for work scissors, glue, material of three colors. You should:

• take a workpiece 30 mm wide with a length of 18 cm;
• roll into a ring;
• connect the edges with glue.

The next steps to assemble the decoration are:

• fold the ring so that the seam remains at the bottom in the middle;
• iron;
• take a ribbon of a different color of the same width, with a length of 7 cm;
• wrap a ring around the workpiece crosswise;
• fix with glue;
• prepare a ribbon of a contrasting color of the same length, but thin;
• wrap around in the middle of the previous ring;
• seal;
• iron.

Two-color beautiful bow made of satin ribbon with your own hands

A stylish and very elegant decoration can be assembled from blanks of two colors. Ease of manufacture does not mean that it will look modest. Elegant and spectacular, it will decorate your hairstyle and original dress. You will need a wide and narrow blank. To make jewelry:

• measure 2 pieces 15 cm long - one narrow, the other wide, cut;
• put one on top of the other;
• roll into a ring;
• Fix the joint with glue;
• iron;
• use a narrow ribbon to tie a bow in the middle, covering the joint, forming a knot;
• cut off the ends;
• glue it.

DIY gift bows made from satin ribbons

A gift box for an anniversary or birthday will look much more impressive if you decorate it with a bow. Depending on the situation, it can be small, elegant or voluminous and lush, for example, like this. Tying it is very simple - you can quickly learn, even without a master class, by following the instructions:

• take a piece two meters long;
• wrap around the open palm of your left hand;
• remove carefully;
• leave the end free.

• on a workpiece folded in several layers, cut off both corners on one side, approximately 5 mm;
• burn so that they do not bloom;
• repeat the operations on the other side;
• fold the workpiece so that the cut parts are aligned in the middle;
• tie with the free end of the ribbon;
• straighten each petal, giving it volume.

A lush bow made by yourself can please a young beauty if it is woven into her hair or becomes a decoration for a gift box. To make it you will need 6 blanks 12 cm long, 5 cm wide, the same number 11 cm long and 30 mm wide. They must first be burned around the edges. You will also need an elegant thin braid, small beads and a piece of felt. Next, you need to do this:

• take wide blanks;
• fold in half;
• assemble sequentially onto one thread;
• tighten, fasten;
• repeat the process for narrow ribbons;
• cut a circle with a diameter of 40 mm from felt;
• stick a large blank on it;
• take pieces of thin braid 12 cm long - 6 pieces;
• fold each into a ring;
• glue on the front side, placing it on the petals;
• fix a piece of narrow ribbon on top;
• pour glue, approximately 10 mm in diameter, onto a piece of fabric;
• place the beads on it tightly in a circle;
• cut in circle;
• glue the decor in the middle of the decoration.

If you want to decorate holiday card tiny bow, try using a fork. The process will go like this:

• take in left hand fork;
• loop a ribbon over it so that the edges remain to the right;
• Throw the far end behind the fork over the lower one in front;
• insert it in the middle between the teeth and bring it back;
• insert the remaining tip of the ribbon on the right into the same gap, but from above;
• turn the fork over and tie both ends with two knots;
• remove the bow;
• cut the ends and singe them.

DIY lacy satin bow

Do you want to learn how to wrap gifts like Dior? The technology will not cause difficulties, and the look will be unusual and original. To make this you need satin blanks 25, 20, 16 and 10 cm long. To make this decoration:

• burn the edges of the ribbons;
• roll the longest one into a ring;
• glue the ends;
• repeat the operations with other workpieces;
• stack all the rings on top of each other, starting with the largest one, placing the glued sections at the bottom;
• pass an additional ribbon on top of the rings (alternatively, it can go inside the small element);
• fix with reverse side.

If the process of making jewelry according to the attached instructions seems complicated to you, watch the video master classes.

You will understand how to make a flower bow with your own hands without special tools, learn how to assemble decorations for gift boxes, learn how to tie a voluminous two-color accessory for a holiday hairpin, and understand that making bows yourself is a simple and fun process. Handicrafts will help you look original and unique, making your image attractive and stylish.

How to make a beautiful flower-shaped satin ribbon bow

Ribbon gift bow

How to tie a beautiful bow from a satin ribbon

Festive headband/How to Make Beautiful Headband Kanzashi

How to make a beautiful bow from a satin ribbon with your own hands

How to make a large, fluffy and beautiful ribbon bow on

How to make a bow from a satin ribbon with your own hands with a photo

Bow - Handicraft Masters

Animation Congratulatory bouquet GIF images

Gratitude - Animation pictures and poems. Good time of year!

Knitting is your hobby. Appendix 1 2018. Knitting magazine

Curtain design for the bedroom: 50 photos of the best design solutions

Vest in five minutes from Olga Nikishicheva. Good morning

How to make a canopy over a well

Trepang at home

More on crochet

DIY drawings about love

Do-it-yourself heating wiring for a private two-story house

1. How to finish the edges
2. Classical
3. Two-color
4. Extravagant
5. Openwork
6. Lush

A lush festive bow is traditionally used to decorate gifts, hairstyles, envelopes, and also as elegant accessories for any outfit. A cute DIY ribbon bow will be a wonderful decoration for gift packaging or postcards, the main thing is to choose the right shape and material.

How to finish the edges

To ensure that the ends look neat and do not fray, they should be processed. First of all, trim them sharp scissors at an angle of 45 degrees. The V-shape in the form of a dovetail looks great on openwork designs.

Then take a lighter or match and scorch the edges, keeping the flame an inch away from the fabric.

How to make a bow from a satin ribbon with your own hands

This method is ideal for any synthetic materials.

The easiest way is to cover the ends with PVA glue. This method does not look very aesthetically pleasing, so it is only suitable for designs in which the ends are hidden under folds.

Classical

The gift wrapping will be decorated with a classic DIY ribbon bow, simple step-by-step master class will help you make it in just 5 minutes:

1. Place the ribbon face down on the table and cross the ends in the middle to create a loop on each side.
2. Place the resulting loops on top of each other crosswise.
3. Wrap the left loop around the right one, then pass it through the resulting center loop and tighten the bow.

Thin and airy fabrics will make the product lifeless and sluggish in appearance, so use thick satin, rep or crepe-satin to make it.

Two-color

An unusual two- or three-color bow will be a wonderful decoration for a hair clip or headband. You will need stripes of different colors, and each new one should be narrower than the previous one.

1. Lay out two strips of contrasting colors on the work surface so that the narrow one is on top.
2. Roll the workpiece into a ring and fasten it with glue.
3. Iron the workpiece through a sheet of thick paper.
4. Tie the middle and straighten the edges.

You can combine more colors with each other, the main thing is to select stripes of different widths to demonstrate all the color layers of the product.

Extravagant

A large, lush bow made of satin ribbons, made by yourself, will decorate a hoop, hairpin or headdress. For this master class you will need 115 centimeters of wide tape and a piece of thin wire.

1. Measure 20 centimeters from the edge and make the first loop, holding its base between your fingers.
2. Using the long end, make a similar loop next to the first one.
3. Then make another loop, but on the opposite side.
4. Continue to form the structure, alternating loops on different sides. As a result, you should end up with a butterfly-shaped piece.
5. A piece of wire should be wrapped around the center of the workpiece and the excess should be trimmed with scissors.
6. Take a short strip of fabric in a contrasting color and wrap it around the center of the piece to disguise the wire.
7. Straighten the loops and give the product a rounded shape so that it looks like a lush flower.

Organza, satin or silk are suitable materials for this master class. The airy structure can be further decorated with a decorative cord or a beautiful plastic brooch can be glued to the center.

Openwork

How to make an elegant openwork ribbon bow with your own hands? It’s very simple, you just need to prepare two meters of satin, a glue gun and transparent tape in advance.

1. Take a box decorated with wrapping paper and wrap a ribbon around it, after lubricating it with glue.
2. There should be two long ends left on the box lid, take one of them and twist a large loop, gluing its edge to the center of the lid.
3. Then the loop must be assembled, making several smaller loops from its folds and fixing their bases with glue.
4. Then repeat the same with the other end.

Remember that the volume of the future product depends on the number of small loops. To make the design more voluminous, make the loops as small as possible.

Lush

For curvy figures, it is better to use rigid materials that hold their shape well, such as velvet. To clearly see how to properly make an elegant bow from a ribbon with your own hands, use the training video with a visual master class.

1. Take a long ribbon and wrap it around your palm several times.
2. Trim the corners of the workpiece from each edge.
3. Unravel the workpiece and twist the same number of turns again, but so that the cut corners are in the middle.
4. Tie the middle and begin to carefully pull out each turn and straighten the petals, twisting them along the axis.

Now all that remains is to fluff the decoration and attach it to the gift using double-sided tape.

Based classical techniques You can make custom bows, adding beads, sparkles or perforations, and use them to decorate candles self made or hairstyles for September 1st - the scope for imagination is limitless. Don’t be afraid to experiment with materials and colors, an original color scheme or unusual fabric They will only decorate the product, making it unique and exclusive.

Little tricks in the arsenal of every housewife are designed to greatly facilitate and decorate our lives. In this article we will talk about an important accessory for festive mood. How to make a bow from a ribbon and beautifully decorate a gift or the interior of your home with it - all the information is given below.

How to make a bow from paper or ribbon

You can make beautiful bows from different materials, but the most popular are paper and various tapes. Let's look at the most popular manufacturing methods from these materials below.

Paper technology

Anyone will like elegant and unusual “jagged” jewelry, and if you master the technique, you can make such a miracle yourself.

To make it you need to prepare:

• paper of sufficient thickness (old posters are perfect);
• scissors;
• glue or stationery stapler;
• ruler.

How to make a paper bow:

• Cut strips of paper of equal thickness.
• Use a ruler to measure the pieces different lengths.
• Roll each piece at an angle without deforming the paper.
• Fasten two pieces together to form a kind of “figure eight”.
• In total, you need three large and medium “eights”, as well as two small ones.
• The last figure is simply made in the form of a circle.
• Starting from the longest “eights”, arrange three pieces in the form of a circle, then fasten them in the middle.
• The medium length “eight” is also secured in the form of a circle.
• Place the middle “circle” on the large figure so that the teeth fall in a checkerboard pattern.
• Fasten the remaining two small “eights” crosswise and place them on top of the resulting figure.
• The “top” of our bow will be a paper circle placed on its side.

To illustrate the process of assembling a paper bow, there is a photograph that clearly illustrates the process.

An original and very delicate bow is obtained using another option. To do this, just cut out shaped parts from colored paper (it’s better to do this using a template) and fasten them together, as shown in the photo. For variety, you can use several colors, as well as paper with designs. Having shown the proper ingenuity, you can independently come up with new figures for an exclusive model.

Ribbon manufacturing technology

The most suitable material for creating such decor are ready-made ribbons, the range of which is constantly increasing.

There are many types, the most common of them: satin, guipure, silk and translucent organza.

In this case, you should also take into account the huge selection of colors, shiny varieties and the ability to choose stripes with a pattern. In general, there is room for your imagination to run wild, the choice of suitable products will depend solely on your aesthetic taste, but we will tell you how to make a bow from a ribbon with your own hands.

Manufacturing technology can be divided into stages of complexity. Having successfully mastered one option, you can complicate the task a little and move on to the next one.

Simple DIY satin ribbon bow

To do this, take a strip of sufficient length, and the principle of the knot itself is shown in the photo.

To make a neater knot, you can use the master class below on how to tie a bow from a satin ribbon. At first, this method will seem too complicated, but with due diligence and training, everything will work out purely mechanically.

Several options for ribbon bows

To create such a decor, it will be enough to select strips of different thicknesses and colors. A monochromatic bow will be significantly inferior in aesthetic terms, so it is better to choose a more interesting option.

To make such a bow, you should cut three strips of different lengths, combine them with each other and tighten them with a smaller piece. The edges can be made jagged, or simply tucked in - this will give the product volume.

The second option will be no less cute and also easy to implement.

Gift bow - Simple Recipes

To do this, circles are formed from suitable strips of different widths, but of the same diameter. Having attached the tapes to each other, the middle is fixed with another piece. The resulting decor can be used not only to create hair decorations, but also all kinds of ideas, a list of which you will find below.

How to tie a bow on a fork

You can try using improvised means. A simple and very attractive way to beautifully tie a bow from a ribbon, presented in an original way, using an ordinary table fork.

The step-by-step instructions in the picture will help you master this technique; for convenience, the ends of the tape are labeled with letters.

Such decorations are extremely attractive and are suitable, for example, for decorating clothes. With their help, you can add new colors to even a plain turtleneck.

You can complicate the process a little and make two-tier bows from ribbons with your own hands. Decorate the central part with a bead, and additionally make an organza base at the bottom. An example of such creativity is presented in the photo as a sample, so get inspired for your own projects.

Step-by-step manufacturing instructions

The simple technique of making bows on a fork can be slightly modified. For this purpose it is presented step-by-step instruction DIY ribbon bow and corresponding illustrations.

How to tie a ribbon bow on a fork:

• Insert the tape and fasteners between the middle teeth of the fork.
• Pass the main tape alternately between the teeth in a checkerboard pattern.
• Fix the beginning of the strip in your hand, the rows alternate until the very top. The more there are, the more magnificent the product will be.
• Tie the resulting loops with fasteners using ribbon, trim the ends and scorch them a little with fire so that they do not unravel.
• Alternating stripes of different colors, sizes and surface textures.
• Using patterned ribbons.
• Fastening with thread will make the figure more voluminous.

Variations:

The main improvement may concern the size of the product.

Large bows from satin ribbons can be made using cardboard template suitable size or your own fingers.

Options for decorating flower bouquets

Bouquets are held together with similar decorations, and bows can be made from paper and fabric ribbon. Both options are quite nice, and brief diagrams will show how you can create this decor as quickly as possible.

Want something interesting?

Option #1:

• Wrap the tape around your palm or any suitable object.
• Trim the ends of the edges for easier fixation.
• Align the cut pieces to each other (they will now be in the middle of the tape).
• Secure and straighten the “petals”.
• The more turns there are, the more magnificent the bow will be.
• Fix in the middle.
• “Fluff” the turns of the tape.

Option #2:

• Fold the tape several times in a figure eight.
• Fix in the middle.
• “Fluff” the turns of the tape.
• Carefully trim the ends and the bow is ready.

Option #3:

• Fold the bow according to the principle of the first option.
• Make cuts along the edges of the fixed tape.
• A fluffy bow will have a more voluminous and interesting look.

Option #4:

• The tape twists at the attachment points.
• “Petals” are formed directly in the hand. This way you can control the volume of the bow, which is very convenient for decoration. You can make the ends of different sizes.
• After right size and the appearance of the product has been achieved, secure in the middle with the end of the tape.

You can make original bows from satin ribbons with your own hands using the following technology:

• Wind a satin ribbon between two fixed knitting needles.
• Place a line in the middle.
• Remove the ribbons and gather the thread.
• Secure the thread, trim the ends - the bow is ready.

American design options

American bows got their name not entirely deservedly, because similar patterns can be found in various countries. The main requirement when designing such decor is to show imagination. The creation of such decor is based on the use of several types of products at once, so there will be a lot of options. This type can be called a traditional option; our master class will describe its creation in detail.

How to make a bow from a satin ribbon in the American style:

• “Eights” are formed from a thin ribbon.
• Individual parts of two or three pieces are fastened together.
• From below you can make a base from several straight strips fastened in the middle.
• For additional decoration, you can make the edges jagged.
• Secure the two parts together; you can glue a bead or a simple bow of a smaller size to the top.

Individual elements can be seen in the photo.

The end result should be something like this.

For children's hairpins, it is better to take a stronger rep ribbon. Nowadays they sell products with interesting designs, for example, favorite cartoon characters.

What can be decorated with homemade bows:

• Decoration of clothes, belts and shoes.
• Sofa cushions.
• Cutlery before serving to guests.
• Napkins, towels and kitchen curtains.
• Newborn envelope.
• Covers for champagne bottles.
• Wedding glasses, cars, witness ribbons and other festive attributes.
• Hair ornaments.

Decorating the New Year tree with bows is becoming increasingly popular. You can buy ready-made ones without any problems at any suitable store, but it will be much more interesting to make such a decoration yourself, especially if children help you with this. This would also be a great idea for a gift for loved ones for the New Year holidays.

New Year's bows on the Christmas tree

Simple and incredibly attractive decor can be obtained from the tips below. To make bows for the Christmas tree you will need the most various materials: paper, felt, organza and even lace. Several successful examples are given in our article; they can be used as a model for independent inventions.

DIY Christmas tree bows made from felt

This unique material is in great demand in needlework. Its main advantage is its dense “plush” structure, the edges of which will not fray, and therefore do not require additional processing.

A simple bow for a Christmas tree is made approximately as shown in the photo. In this case, the upper part can be additionally decorated with beads, beads and just a bright ribbon of a contrasting shade.

You can make rounded edges, you get a completely different model.

A more complex model of such decor requires detailed description, the whole process is clearly presented in the photo.

DIY New Year's decor:

• Cut the felt into strips of arbitrary thickness.
• Fold the strip in half and sew small stitches along the edge of the fabric.
• Cut the folds at equal intervals, not reaching the edge.
• Carefully gather the thread to form a circle.
• Trim and secure the edge.
• Decorate the top as desired.

How to make a ribbon bow for a Christmas tree

The above options are perfect for New Year's decor, especially since you can choose ribbons with the appropriate pattern. The color traditionally used is red, but if you don't have a specific color preference, you can choose multi-colored options.

In order to understand how to tie a bow from a ribbon, just look at the photo below. With some skill, such decorations can be made quite quickly.

With beautiful spirals you can not only decorate a ribbon bow on a Christmas tree, but also use the idea to create hair decorations.

Technology for making spiral elements:

• Wrap a satin ribbon around wooden skewers.
• Secure the edges with pins.
• Place in the oven at approximately 180º C for five minutes.
• After cooling, the tapes will acquire beautiful and uniform bends.

Original tulle design

The unusual appearance of this tulle bow can also be used to create New Year's decor. To do this, you need to take organza or cut a small strip of tulle. The algorithm of actions is shown in the photo and resembles the process of creating pompoms.

There are plenty of examples of use, ranging from gift wrapping to decorating curtains. We looked at the most successful options for creating bows in our article, but the final result and possible variations will depend solely on your imagination.

Correct calculation of knitting loops

How to clean sheepskin on a sheepskin coat at home

Happy birthday poster for mom

DIY sweets inside a flower

Knitting borders with knitting needles with description

The range of satin ribbons is amazing in its diversity. Ribbons have different widths, colors, patterns, and finishes. This material is affordable and easy to use, and you can make very beautiful products. In this article we offer several master classes on creating both simple bows for every day and elegant, festive bows.

Let's consider first the most simple ways tying a bow. Although, at first glance, it seems that tying a regular bow is very easy, there are still some tricks in this process. We will look at a method that will allow you to get an even, symmetrical bow with a beautiful center. To do this, you only need a satin ribbon and scissors.

1. Take a piece of tape of the required length.

2. Fold the tape as shown in the figure.

3. We pass one of the ears into the resulting loop below and tighten the knot.

4. This is what should happen.

This simple bow is suitable for decorating hair for every day.

How to make a beautiful bow from a satin ribbon?

For example, diversify a regular ponytail or spikelet with a bright ribbon.

Flower bow made of satin ribbon. How to do it yourself?

Now let's look at holiday options satin bows. Making them will be a little more complicated, but the result will be noticeably more impressive. Lush bows for hairstyles from satin ribbons can be easily made yourself. At the same time, the cost of the product is several times less than the price of a store-bought bow. Diameter finished product will be equal to 14 cm, if you want to get products of a larger or smaller diameter, then change the sizes of the tape sections proportionally.

So, to make such a satin bow with your own hands, you need:

Six cuts each:

Satin ribbon 5 cm wide, 14 cm long;

Ribbons 2.5 cm wide, 10.5 cm long;

Silver ribbon 0.3 cm wide, 15 cm long;

Silver ribbon 0.3 cm wide, 8 cm long;

Felt circle with a diameter of 5.5-6 cm;

Decoration for the middle of the bow;

Matching threads, needle, scissors;

Lighter or soldering iron, glue gun or moment-crystal glue;

An elastic band, a hairpin or a clip for the base.

Before assembling the bow, be sure to trim the edges of the cut pieces with a lighter so that they do not fray during the process. Fold 6 five-centimeter pieces in half and gather them onto a double thread, pull the thread so that you get a flower and secure.

Make the second flower in the same way from pieces of ribbon 2.5 cm wide. Then make ears from pieces of silver ribbon, as shown in the picture. Glue the ends together with glue or a glue gun.

Glue large silver ears onto the large flower, one per petal, so that they look beautifully from under the top flower.

Glue a second flower on top and smaller ears on it using the same principle. Cover the core with the prepared decoration. A bead, button, or medallion will do.

On the back side, glue a felt circle to the bow, and attach it with an elastic band, for example. If you use a clip or hairpin, cover them first with matching grosgrain ribbon.

Your bow is ready. It took less than an hour to make an elegant satin bow with your own hands.

Lush bow made of satin ribbons decorated with rhinestones

We will teach you how to make this wonderful decoration with your own hands in the master class. This version of an elegant bow, which you can make yourself, will delight any first-grader. An elegant unusual bow is very simple to make, but it will take more time to complete, since it consists of large quantity details. Please note that you need to carefully complete each workpiece, as general form the bow depends on how well each element is executed. If you do not have the skill to work with satin ribbons, prepare materials for 5-7 extra blanks.

Materials for work:

Tape 2.5 cm wide and 6 meters long;

Rhinestones or beads with a diameter of half a centimeter;

Lighter or soldering iron, scissors, moment-crystal glue, ruler, pencil;

A felt circle with a diameter of 5 cm, fastened with an elastic band or a hair clip.

We cut approximately 50 pieces of ribbon, eleven centimeters long, and trim the edges of the pieces with a lighter.

Fold each piece in half, satin side inward, drop a small drop of glue onto the satin side at a distance of 2-3 centimeters from the fold in the middle and press with your fingers. When the ribbon sticks well, turn it with the satin side out. It turns out that this is the detail.

Then we fold this part in the form of a bow, so that the glued area is in the center, and the edges of the tape are folded to it from the back side.

We decorate the workpiece with rhinestones or beads. We make at least fifty of these parts. This is the most important stage work, if you don’t get a neat workpiece right away, we advise you to practice a little before doing the “finishing” parts.

When the parts are ready, assemble the bow. We begin gluing the blanks onto the felt circle in a circle with a slight overlap. Should fit 11-14 pieces in the first circle.

We glue the second and subsequent circles in a similar way, slowly moving towards the center of the felt circle; the number of elements in the row will decrease as we approach the center. This should give you several circles, gradually decreasing in diameter.

The more elements, the more magnificent the bow will be. After all the blanks are glued, we attach an elastic band or a hairpin using glue or a glue gun, you can add ribbons for tying. The bright lush bow is ready.

These bows will definitely please your little princesses. You can decorate your hair with them both on weekdays and on holidays; with these accessories, budding fashionistas will look elegant and neat. And you will save on the purchase of hair accessories. You can, for example, please a first-grader with such necessary and a beautiful gift on the first of September, or give a gift for a birthday.

How to make a bow from ribbon? Several ways to make decorative bows

Home / Lifehacks

Hello everyone, dear needlewomen! Sometimes, to decorate a gift or create your handicraft, you may need to make a beautiful bow and decorate your creation with it.

There are two proven ways to make such a bow from a satin ribbon or from any other ribbon.

We immediately warn you that the first, and possibly the second and third time, you may not be able to make such a bow as shown in the video. Don't worry, it's just a skill that can be learned through practice.

But when your hands create the first cute bow, you will forget about your early failures :) It will be interesting to see who succeeded, so don’t be shy and send photos of your work.

Elizaveta Rumyantseva

Nothing is impossible for diligence and art.

Content

Is it difficult to imagine a solemn moment without decoration or decoration with elegant bows? Lush and strict, elegant and frivolous - they create a special mood at the holiday. Making a hair clip or a butterfly for an evening suit from satin ribbons is not difficult if you follow the instructions.

How to make bows from satin ribbons

The technology for assembling the decoration requires ribbons of different colors and special widths in accordance with your idea. A minimum set of tools and materials for manufacturing will be required. If you complete the master class, you will not have a question about how to make a bow from a satin ribbon. The proposed step-by-step instructions will make the work process enjoyable and understandable. You will need:

• lighter;
• scissors;
• threads;
• needle;
• ruler;
• glue or heat gun.

Depending on the purpose of the bow, there are various options for manufacturing technologies. He can be:

• small, made using a fork - suitable for decorating a postcard;
• lush, elegant - in the kanzashi style - for a holiday in kindergarten;
• a formal bow tie for an important banquet;
• double – for hair decoration, attached to a headband or hairpin,
• solemn - on a gift box.

Satin bows can be made in the form of an original flower. If you choose the right color and shape, they will become unique decorations:

• elegant evening dress;
• frivolous sundress;
• styled hair;
• in the form of a wrist bracelet;
• stylish handbag;
• bridesmaid dresses;
• smart blouse;
• as a neck pendant;
• furniture in the interior;
• stylish dress for prom;
• curtains in the apartment.

How to make a bow from a satin ribbon in a classic style

The most popular and simple, this bow is used for clothing and interior decoration. Even a modest gift decorated in this way becomes elegant, solemn and attractive. To tie a bow you will need:

• take a piece 20 cm long;
• burn the edges;
• fold in half with the smooth side facing in;
• fold the edges outward again;
• take it in your hands so that each has a loop at the top, and a bend between them at the bottom;
• cross the folded parts in front, forming a ring under them;
• pass one loop through it, tie.

A strict beautiful bow made of satin ribbon with your own hands

You can tie a strict stylish bow for a special occasion. It will decorate a lady's bag, dress or gift. Here it is important to choose the right colors for the craft so that it looks elegant. How to make a bow from a satin ribbon, for example, like the one in the photo. Prepare for work scissors, glue, material of three colors. You should:

• take a workpiece 30 mm wide with a length of 18 cm;
• roll into a ring;
• connect the edges with glue.

The next steps to assemble the decoration are:

• fold the ring so that the seam remains at the bottom in the middle;
• iron;
• take a ribbon of a different color of the same width, with a length of 7 cm;
• wrap a ring around the workpiece crosswise;
• fix with glue;
• prepare a ribbon of a contrasting color of the same length, but thin;
• wrap around in the middle of the previous ring;
• seal;
• iron.

Two-color beautiful bow made of satin ribbon with your own hands

A stylish and very elegant decoration can be assembled from blanks of two colors. Ease of manufacture does not mean that it will look modest. Elegant and spectacular, it will decorate your hairstyle and original dress. You will need a wide and narrow blank. To make jewelry:

• measure 2 pieces 15 cm long - one narrow, the other wide, cut;
• put one on top of the other;
• roll into a ring;
• Fix the joint with glue;
• iron;
• use a narrow ribbon to tie a bow in the middle, covering the joint, forming a knot;
• cut off the ends;
• glue it.

DIY gift bows made from satin ribbons

A gift box for an anniversary or birthday will look much more impressive if you decorate it with a bow. Depending on the situation, it can be small, elegant or voluminous and lush, for example, like this. Tying it is very simple - you can quickly learn, even without a master class, by following the instructions:

• take a piece two meters long;
• wrap around the open palm of your left hand;
• remove carefully;
• leave the end free.

• on a workpiece folded in several layers, cut off both corners on one side, approximately 5 mm;
• burn so that they do not bloom;
• repeat the operations on the other side;
• fold the workpiece so that the cut parts are aligned in the middle;
• tie with the free end of the ribbon;
• straighten each petal, giving it volume.

A lush bow made by yourself can please a young beauty if it is woven into her hair or becomes a decoration for a gift box. To make it you will need 6 blanks 12 cm long, 5 cm wide, the same number 11 cm long and 30 mm wide. They must first be burned around the edges. You will also need an elegant thin braid, small beads and a piece of felt. Next, you need to do this:

• take wide blanks;
• fold in half;
• assemble sequentially onto one thread;
• tighten, fasten;
• repeat the process for narrow ribbons;
• cut a circle with a diameter of 40 mm from felt;
• stick a large blank on it;
• take pieces of thin braid 12 cm long - 6 pieces;
• fold each into a ring;
• glue on the front side, placing it on the petals;
• fix a piece of narrow ribbon on top;
• pour glue, approximately 10 mm in diameter, onto a piece of fabric;
• place the beads on it tightly in a circle;
• cut in circle;
• glue the decor in the middle of the decoration.

If you want to decorate your holiday card with a tiny bow, try using a fork. The process will go like this:

• take a fork in your left hand;
• loop a ribbon over it so that the edges remain to the right;
• Throw the far end behind the fork over the lower one in front;
• insert it in the middle between the teeth and bring it back;
• insert the remaining tip of the ribbon on the right into the same gap, but from above;
• turn the fork over and tie both ends with two knots;
• remove the bow;
• cut the ends and singe them.

DIY lacy satin bow

Do you want to learn how to wrap gifts like Dior? The technology will not cause difficulties, and the look will be unusual and original. To make this you need satin blanks 25, 20, 16 and 10 cm long. To make this decoration:

• burn the edges of the ribbons;
• roll the longest one into a ring;
• glue the ends;
• repeat the operations with other workpieces;
• stack all the rings on top of each other, starting with the largest one, placing the glued sections at the bottom;
• pass an additional ribbon on top of the rings (alternatively, it can go inside the small element);
• secure on the reverse side.

Video: how to make a beautiful bow from a satin ribbon

If the process of making jewelry according to the attached instructions seems complicated to you, watch the video master classes. You will understand how to make a flower bow with your own hands without special tools, learn how to assemble decorations for gift boxes, learn how to tie a voluminous two-color accessory for a holiday hairpin, and understand that making bows yourself is a simple and fun process. Handicrafts will help you look original and unique, making your image attractive and stylish.

How to make a beautiful flower-shaped satin ribbon bow

Ribbon gift bow

How to tie a beautiful bow from a satin ribbon

Found an error in the text? Select it, press Ctrl + Enter and we will fix everything!

Here's a photo showing a variety of techniques for creating simple handmade ribbon bows.

How to make a simple bow?

You can make the simplest bow yourself as follows:

• Before starting work, prepare two ribbons (wide and narrow) of different colors. The length and width of the light tape is 20x5cm, dark - 40x5cm, respectively.
• Next, fold the wide ribbon into a loop and secure the edges with glue.
• Repeat the same with a narrow ribbon. To do this, you need to put it on top of the wide one, and fasten the ends of both with glue to each other.
• Take the remaining piece of narrow ribbon and tie it loosely in the middle of the resulting product.
• Free edges allow you to attach a bow to a gift or clothing

How to make a lush bow from ribbon

There are many variations on this theme. Here is one simple way to make a satin bow at home:

• Purchase a ribbon of the required length and width from the store. The longer it is, the more magnificent the product will be.
• Fold the ribbon like an accordion and tie the part in the middle with thread.
• To make a large satin ribbon bow, use several of these elements connected to each other.

Lovely bow in kindergarten or for September 1st, it’s easy for first-graders to create using a two-meter white ribbon.

To do this, perform the following steps:

• Prepare several segments of equal length (15cm).
• Place them right side inward.
• Glue is applied at a distance of 2 cm from the bend.
• The gluing area is pressed with tweezers for strength.
• After the glue has dried, the bows can be turned outward.
• The edges are fastened with thread and sewn to the base (felt, cloth).
• Rhinestones and beads are suitable as additional decoration.

Wide ribbon bows

Often, when choosing a bow tie, difficulties arise, since the store does not always have the model in the desired color.

A worthy solution to this problem would be to make such a tie from scrap materials. Here's a quick guide:

• Prepare 2 pieces of tape of different lengths and widths: the first – 20x5, the second – 18x3
• Fold each one in half, securing the ends with glue.
• For strong bonding, it is recommended to use a needle
• Connect both parts using stitches
• Pull the thread and fasten

The original decoration is considered to be “roses” - beautiful DIY bows.

Creation proceeds according to the following scheme:

• Wrap the ribbon around your hand and make a knot
• Spread the “petals”, bending them inward
• Repeat the action with each “petal”

Narrow satin ribbon bow

The Dior decorative element will add sophistication and charm to your clothes. Making a kind of bow is not difficult:

• Cut elements of varying lengths from tape
• Make figure-eight turns out of them.
• Place them on top of each other from largest to smallest
• To fasten the bow - to do this you need to thread a small piece of ribbon of the same shade into the last turn

The finished product will fit into any packaging box and will be especially stylish when combined with round and oval shapes.

The following video will clearly present a master class on how to make many small bows from a narrow ribbon using a dinner fork.

Hair ornaments

Handmade hair bows are a great way to stand out. To do this, adhere to the following points:

• Take 2 pieces of tape (5x25) and a thin tape
• Fold the corner at one edge of the wide ribbon
• Combine the end of the second corner with the first
• Connect the resulting corners with a needle to form a loop.
• Then do the same next to the corners. Turning the product over, make another corner (perform these steps until a triangle of tape remains)
• Bend the resulting “diamond” in half twice
• Fold the free end to form a triangle
• Carefully hold it in the center so that the structure does not fall apart
• Remove the needles and bend the inner triangle to create a petal.
• Sew the element in the middle

After this, you should prepare another such part and connect both using a narrow ribbon. To attach the products to your hair, you will need a clip or elastic band.

How to make a chic bow from nylon ribbon

To ensure that the process of home crafts is not too labor-intensive, it is enough to follow the step-by-step steps:

• You will need 2 ribbons of the same size (150x8)
• Bend each one in half and try to thread it on a needle and thread.
• After finishing the work, pull the thread so that the remaining piece of tape is 30-40cm
• Make a knot and straighten the resulting product
• Take thick felt and prepare a circle (diameter 8cm)
• Make two holes in it and thread a thin ribbon through them
• Glue the first tape to the base in a spiral, then the second.
• Cut off the rest of the tape and trim the ends

Photos of DIY ribbon bows

Note!

Note!

Ribbon bows can be used anywhere. Their use will add originality to daily life, will decorate gifts for the holidays, and help create a unique hairstyle. There are many options for tying bows, from the simplest to the most complex and incredibly beautiful.

Bows are made from ribbons specially designed for this purpose.

Materials for tapes:

• atlas;
• organza;
• tulle;
• reps;
• nylon;
• paper;
• lace;
• cotton material.

Table of material features for tapes:

Material name	Positive sides	Flaws
Atlas	strength; durability; with proper care, the material does not lose its shape; completely safe; absorbs moisture; not electrified.	The fabric is heavy and shrinks when washed in hot water. raw edge is rapidly crumbling
Organza	strength; dimensional stability; fabric deformation is completely eliminated; rich appearance; does not require special care.	it costs expensive; unpleasant to the body; does not allow air to pass through well; Working with such fabric is quite difficult.
Fatin	the fabric is elastic; light and durable; does not wrinkle; holds heat well and allows air to pass through; dries quickly; affordable.	The material does not tolerate high temperatures, electrified
Reps	strength; density; holds its shape well; allows air to pass through and absorbs moisture; does not wrinkle.	The cotton variety of fabric shrinks when washed in hot water, silk and wool fabric hand wash only and dry flat
Capron	strength; ease; smoothness; the material repels dirt; does not deform; does not wrinkle.	completely synthetic material; fades in the sun; does not absorb moisture; doesn't warm up.
Paper	Wide variety of color scheme, glossy shine, easy to work with material	Wrinkles and does not smooth out, easily damaged
Lace	Elegant appearance, elasticity, fabric allows air to pass through well	Requires special care: do not squeeze, do not overdry
Cotton material	Natural, warm, durable, pleasant to the touch fabric.	Easily wrinkles, difficult to smooth out, shrinks, fades after washing

Tools

To make your own ribbon bow, you will need:

• tapes as the main material;
• ruler for measurements;
• well sharpened scissors;
• tweezers for fixing the ends of the tape;
• a fire source for singeing ends;
• glue.

beads and rhinestones are used for decoration

Before making ribbon bows, you should consider the following nuances:

• For a correctly made product, the front side of the tape should be visible, the back side should be hidden;
• cuts must be singed;
• in order not to spoil the shape of the material, it is not recommended to leave the ribbons tied for a long time;
• if the bow will be used as a decorative element for clothing, the material of the bow must be compatible in texture with the material of the clothing;
• to determine the correct length of ribbon for wrapping the box, you need to make 2 turns of the ribbon around the box and add at least 60 cm for the bow;
• when tying a bow, it is important to leave the free ends of the ribbon as long as possible, and then shorten them with scissors;
• You can shorten the ends using one of 2 options: cut diagonally or in a V-shape.

For gift boxes and bouquet arrangements, it is more convenient to use a ribbon with wire inside; the product will retain its original appearance for a long time.

How to beautifully tie a bow from a satin ribbon

How to tie a bow from a satin ribbon in the classic variation:

• determine the middle of the tape;
• put a ribbon on index fingers, loops must be equal, the bottom of each loop is clamped thumb;
• cross the loops;
• thread one loop into another;
• tighten the knot.

To make a strict bow from satin ribbon, you need:

• lay out a strip of material on the table and determine the middle;
• each edge of the tape is fixed with glue in the middle of the tape (if folded correctly, the side view resembles an infinity sign), smooth out;
• A small piece of tape (can be of a different color) is wrapped around the joint;
• glue the ends on the back of the bow.

To tie a double bow, you will need 2 ribbons of the same length.

1. The ribbons are folded together.
2. Place 1 loop on your index fingers.
3. Cross the loops.
4. Thread one of the loops into the ring formed at the bottom and tighten.
5. Smooth out the finished bow, straighten the ends of the ribbon, you can hide them inside the loops of the bow.

The double bow can be done differently, and it will look a little different:

• take wide and narrow ribbons of the same length;
• place a narrow ribbon on a wide one, glue the ends together;
• fold the ribbon in a circle, fasten the ends;
• the joint of the glued opposite ends is located in the middle of the bow, the joint is fastened to the parallel part of the future bow;
• wrap the contact area with thin tape.

On the neck

You can tie a bow in the shape of a butterfly around your neck using a ribbon in one of 2 ways:

1. Place the ribbon over your neck and cross the ends.
2. Pass the right end of the tape up and down. The right side of the ribbon should wrap around the left side until it crosses.
3. Now the left half of the tape wraps around the right half, which is in a horizontal position, and is passed through the loop. At the end the knot is tightened.
4. Place the ribbon on the neck so that its ends are different in length. Cross over (the longer part should be on top).
5. Wrap this part of the ribbon around the short part and lower it down.
6. Fold the short end into a semicircle.
7. Long part at the same time it is located in front and also folds in a semicircle.
8. Thread through the loop that is located behind the 1st half-bow.
9. Tighten, straighten.

A voluminous bow on the neck is tied like this:

• wrap the ribbon around the neck;
• form loops;
• intertwined and tied;
• straighten the bow.

On the dress

How to tie a ribbon bow on a dress:

• the ends of the decorative strip are folded into loops and crossed;
• the place of crossing is fixed with glue (in this case, rhinestones are glued on top) or with a decorative pin;
• attach the accessory to the dress.

On the belt

To beautifully tie a bow at the waist, you must follow the following procedure:

• wrap a ribbon around your waist;
• fold the ends into 2 loops, cross;
• skip 1 element into the formed loop;
• tighten.

An original solution for decorating the waist would be a bow with one loop.

Execution order:

• the ribbon wraps around the waist, its ends should be different in length;
• a loop is formed from a long piece of tape and crossed with the short end;
• the loop goes down, wrapping around the short end of the tape;
• tightens;
• The length of the ends of the tape is adjustable.

How to tie a beautiful ribbon bow on chairs

Recently, it has become fashionable to decorate the backs of chairs with bows. You need to be very careful when decorating chairs: the color of the bow should match the nature of the event. In order for the bow to retain its shape for a long time, it is better to choose rigid materials (organza), the edges of which must be well processed.

Most often, the backs of chairs are decorated with classic bows.

It goes like this:

• wrap ribbon around the back of a chair;
• make 2 loops at the free ends, cross;
• wrap one loop around the other, moving towards you;
• tighten, straighten.

Another option for tying a ribbon on the back of a chair involves placing the decoration under the top crossbar.

Description:

• the tape is folded in half;
• hang the ribbon on the top crossbar, the loop is located with inside;
• the tails are threaded into a loop and tightened.

How to beautifully tie bows on September 1

You can tie it in one of 3 ways:

• pleated bow;
• 4 petals;
• luxurious flower.

For option 1 you will need a wide ribbon and an elastic band.

1. The hair is gathered together and tied with an elastic band.
2. Then the hair is wrapped with a ribbon, one edge of the ribbon is left long, the other short.
3. The long end is folded several times and tied with the short one. The bow is ready.

The “4 petals” bow is made like this:

• the collected hair is wrapped in a ribbon and tied in a single knot, the ends of the ribbon should be the same;
• loops are made from the tails and tied with a classic bow;
• the remaining ends are also folded and tied.

Before creating the next hairstyle, the tape must be prepared:

• sew the tape along the center;
• assemble with an accordion;
• shape the ribbon into a bow or flower and sew.

Attach the bow to the elastic band, gather the hair together, and tie it with an elastic band.

Bow on the box for gift decoration

Volumetric bows will always be appropriate on gift boxes.

Making a bow ball:

• fold the tape in several layers;
• cut off the corners of the resulting rectangle;
• move the slices to the center, carefully moving the tape;
• Tighten the narrowest part of the tape well;
• pull out all the loops one by one, forming a ball.

To create a fluffy bow you will need 3 ribbons of different widths.

1. Lay a strip of medium width in 4 layers, the layers should be located one above the other.
2. Also fold a wide strip and arrange the tiers crosswise.
3. Place the 1st bow on top of the 2nd.
4. Tighten the center with a thin ribbon.

Large fluffy ribbon bow

To create a large bow, you will need a very wide ribbon, from which a square is first cut.

1. You need to place a base (a small strong box) in the center of the square.
2. Cover the top and bottom of the base with the edges of the tape.
3. Make several folds on the short sides of the resulting rectangle.
4. In the middle, where the base is located, collect the ribbon and tie it.
5. Straighten the bow loops.

Wide ribbon bow

A bow made from a wide plain ribbon will look very beautiful and original if a narrow stripe with an ornament runs along the center line along the entire length.

Scheme for creating a bow:

• spread a wide strip of tape on the table;
• along the middle line and along the edges, attach a narrow bright stripe or a stripe with a pattern with hidden stitches;
• wrap the completed strip of fabric around your hand;
• tie;
• remove from hand and straighten.

From thin tape

For lush bows, a decorative strip of thin fabric is more suitable.

How to tie a bow from a ribbon is clearly shown in the photo.

For the craft you need:

• lay the strip of fabric over its entire length in turns, the turns should be located one above the other. The more turns, the more magnificent the bow;
• tie tightly in the center;
• straighten;
• arrange the rings in a circle.

From a narrow ribbon

How to tie a bow from a small width ribbon in the shape of a flower:

• cut the tape to the required length (at least 100 cm);
• measure 20 cm from one end and form the first loop about 3 cm long;
• Make the 2nd loop in the same way from the opposite end;
• Make the 3rd loop on the opposite side near the 1st, continue until the entire strip of fabric has been used;
• carefully tie the center of the folded strip of fabric with special wire;
• wrap the wire with tape;
• straighten the loops in a circle.

From nylon tape

To make a lush bow from nylon, the ribbon must first be smoothed well and the cuts treated with fire.

1. Now the tape is folded along the center line and sewn with small stitches along the fold. In this case, the thread should be tightly tightened.
2. Twist the stitched tape into a spiral.
3. Sew the edge assembled with an accordion.
4. Attach the completed bow to the elastic.

A voluminous nylon bow can simply be tied on your hair.

To do this you need:

• gather your hair into a ponytail and wrap it with a ribbon;
• tie a single knot (cross the ends of the ribbon, wrap the lower end of the ribbon around the upper one);
• make loops at both ends of the nylon strip, leave both free parts of the tape long, tie;
• Form one more loop from the remaining long ends and tie.

From paper tape

To make a “Star” bow from paper ribbon, you need to do the following:

• cut the tape into strips like this: The 1st 3 will be the longest, the 2nd 3 stripes will be a little shorter, the 3rd will be just as shorter than the 2nd stripes;
• each strip is folded into a figure eight, the ends are secured;
• the first three largest elements are laid in a circle, making up the lower tier;
• a tier of medium-sized elements is laid on it in the same way, the petals should be arranged in a checkerboard pattern, the tiers are fastened in the center;
• The small petals are attached last in a similar arrangement.

Wrap a small piece of ribbon into a ring and attach it in the center of the craft.

How to make a ribbon bow for discharge

To make the ribbon bow for graduation look elegant, it is better to use ribbons of several matching colors and decorative elements. This bow will be multi-tiered.

Manufacturing instructions:

• work begins from the lower tier, the tape is cut into pieces 20 cm long, the ends of each piece are singed and stitched;
• the petals are laid out in a circle and connected to each other;
• for the petals of the next tier, cut strips 15 cm long, also make petals out of them and fasten them in a circle;
• place the upper circle of petals on the lower one, sew at the central point;
• Decorate the middle of the bow flower with beads and rhinestones.

Story about creating a bow for a newborn boy:

You can make a bow of 3-4 tiers. It is important to remember: the higher the petals, the smaller they are.

Two-color

To make a two-color bow, you will need 2 different-colored ribbons of different widths. The wider ribbon will form the base and background; it should be plain. You can use a narrow ribbon with a bright pattern.

Work process:

• cut 2 pieces of the same length of wide and narrow tape;
• place a narrow ribbon on a wide one along the center line, secure the ends;
• roll into a ring;
• glue the joint;
• smooth out;
• pull the bow in the middle with a narrow ribbon, hiding the joint under it, and tie it;
• adjust the ends.

Openwork "Dior"

The “Dior” bow is somewhat different from other crafts made from ribbons with loops and knots. It is a semicircular half of the bow lying in the same plane. To make it, you can choose any ribbon, including lace.

Procedure:

• Rings are made from ribbons of different lengths;
• the rings are superimposed on one another from largest to smallest;
• they are fixed in the middle with a stapler, so that each ring takes the shape of a figure eight;
• the smallest ring is placed on top and fixed;
• hide the fixation point under the tape that passes through the small ring.

Using a fork

To make a bow on a fork with your own hands, you will need a ribbon at least 15 cm long and a dinner fork with 4 tines.

Procedure:

• wrap the tape around the tines of the fork and cross them on the inside;
• determine the length of the ends of the tape, one of them should be much longer than the other;
• pull the long end through the middle gap between the teeth;
• the same end is brought up between the 2nd and 3rd teeth;
• the small loop formed does not need to be tightened yet;
• the tape is threaded inside the loop;
• pull the end of the workpiece out of the loop, tighten the knot;
• remove the finished bow from cutlery;
• adjust the ends.

Kanzashi technique

How to make a ribbon bow using the kanzashi technique:

• first you need to cut the ribbon into small rectangles, the more rectangles (for example, 15), the more voluminous the bow, a petal will be made from each rectangle;
• place the tape face down on the table;
• bend the top corner to the bottom line and secure with a safety pin;
• flip the rectangle;
• On the front side, bend an acute corner to the bottom;
• hide the end;
• secure with a pin;
• do the same on the opposite side;
• fold the workpiece so that the bent corners are on the inside;
• Sew the bottom edge, tighten the thread;
• turn over, straighten;
• do all the petals in a similar way;
• for the lower tier, put 7 petals on a thread and close them in a circle, for the middle - 5, for the upper - 3;
• Glue the base to the middle of the lower tier from the wrong side;
• From the front side, glue the middle one to the bottom tier, then the top one.

decorate the middle with a large bead.

From grosgrain ribbons

How to tie a bow from a rep ribbon:

1. Fold the ribbon into a figure eight and secure the ends with pins.
2. Fold the middle of each loop to the middle of the bow, fix it, you get 4 small loops.
3. Both bows are stitched in the center, the thread is tightened, the stitch area is wrapped with thread, and the thread is secured.

You can create a wide variety of bows from ribbons of different materials to decorate clothes, gifts and home decoration. The technique of tying bows is extremely simple; anyone can do it.

Article format: E. Chaikina

Useful video on how to make a beautiful bow yourself

You can learn how to make an elegant two-color bow from this video: