Perhaps the thought of holding a sharp razor close to your genitals scares you a little. However, shaving the pubic area allows men to tidy themselves up and is a completely normal part of the male intimate hygiene... The shaving procedure must be preceded by a careful hair trimmer. Then you should lie down in a warm bath for a few minutes, then apply shaving cream to the pubic area and use a razor to cut off all the hairs with smooth and careful movements. And at the end of the procedure, it is important not to forget to treat your skin with a soothing after shave balm!

Steps

Pre-trimming pubic hair with a trimmer

Adjust the minimum length of your hair with the shaving trimmer. It is acceptable to use in in this case and a standard hair clipper, but the shaving trimmer is usually smaller and more maneuverable, making it better suited for such a sensitive area. The minimum trimmer setting will allow you to trim hairs to 3mm or less.

Start by trimming the hair around the genitals. Stand up straight, take the trimmer in your dominant hand, and with the other hand, adjust the position of the penis and scrotum as necessary while cutting. Trim your pubic hair in the direction it grows (for example, from top to bottom just above the penis).

• You can also stretch the skin with your free hand to make trimming easier.
• You may find it easier to work if you place one foot on a chair, toilet lid, or bathtub edge.

1. Gently trim the hair on your scrotum and penis. Once you've finished trimming the hair around the genitals, very slowly run the trimmer over the penis (if required) to trim the hairs there as well. Then, with your free hand, provide yourself access to a specific area of ​​the scrotum and carefully cut the hair from it, gradually moving from one area to another.

   • When clipping the hair from the scrotum, try to straighten and stretch the skin with your free hand. Otherwise, there is a risk of pinching (and even cutting) delicate skin trimmer, which is very painful!
   • You may find it easier to cut your hair if you have an erect penis.

2. If you don't have a trimmer, use a comb and scissors. Starting at the outer edge of the pubic area, insert the teeth of a flat-comb into a small section of hair. Work in the direction of hair growth and position the comb against your skin. Use a sharp pair of scissors to cut off the hair that is protruding above the comb. Then insert the comb into another section of the hair, and so on.

   Shaving trimmed pubic hair

   1. Lie in a warm bath for about five minutes. The warm water will soften the skin and hair, which will help the razor glide over the skin and remove the hairs right at the base. A warm shower also helps to achieve this effect, but a bath gives the best results.

      • Taking a bath for more than 10 minutes in some cases can cause swelling of the skin and, conversely, make it difficult to shave.
      • Take a bath immediately after trimming your pubic area with a trimmer.

   2. Apply shaving cream to your pubic area. You can use either a special cream or gel for shaving intimate areas, or a standard shaving cream. Rub the cream into your hair with your hands for 1-2 minutes. This will help soften the hair and lubricate the skin.

      • You can also rub the cream not with your hands, but with a shaving brush. However, to prevent the spread of sexually transmitted diseases, do not use the same shaving brush that you would normally use on your face.

   3. Shave the hair around your genitals with even, steady razor strokes. Stand in a bathtub or other place where it is comfortable for you to raise one leg to facilitate access to the perineum. Grab a clean, sharp razor with your dominant hand, and use your other hand to adjust the position of your genitals as needed while shaving the hair around your penis and scrotum. Apply even pressure to the razor and shave hairs in the direction of hair growth.

      • Rinse the shaver with clean water after every 2-3 strokes with the razor. Be careful not to clog the blade with hair and shaving cream.
      • A dull razor forces you to apply more pressure, which increases the risk of cuts and skin irritation. Therefore, shave your pubic area with a sharp new razor. And do not use this razor to shave your face or any other part of your body afterwards.

   4. For a better shave, stretch your skin, but be aware of the risk of cuts and irritation. Pulling the skin around the genitals with your free hand removes stubble for a smoother shave. However, this also increases the risk of skin irritation, pinching and cuts. This, in turn, can lead to inflammation.

Shaving is a whole art. It doesn't matter if you pick up a razor for the first time in your life or have been shaving for decades, but you do not know if you are doing it right, this article will tell you how to prepare your skin for shaving, shave and take care of your skin after shaving. Our tips will help you achieve smoother skin and a clean look.

Steps

Face preparation

Find the right razor. Consider hair thickness, skin texture, your favorite shaving method, and other factors. For men with thick beards and sensitive skin, it is recommended to use a regular razor with multiple blades.

• Electric shavers shave quickly and are comfortable to use. They do not require the same skin preparation as with traditional shaving and have less impact on sensitive skin. However, sometimes these razors will leave patches of hair on your face. Regular razors are suitable for men with all skin and hair types.
• If you often get red spots after shaving, special razors designed for men with stubborn hair are suitable for you. The purpose of shaving with this razor is to cut the hair as short as possible and prevent it from growing in. Using pre-shave products, lotions, talcum powder, and aftershave cream can reduce red breakouts.
• If you have acne and need to shave an inflamed area, try both an electric razor and a regular razor to see which razor is best for you. Soften your hair with warm water and soap, and then shave very gently without pressing too hard on the razor.

1. Monitor the condition of your shaving tools. Shaving with a dull razor will leave cuts and sore skin on your skin. Try to shave only with sharp, clean blades.

   Trim your beard first. If you wear a beard, it is best to first cut your hair as short as possible with scissors or a clipper. The machine is even more suitable for this than the scissors. Try to cut as much of your hair as possible all over your beard.

   • Do not lather your beard if it is thick, and do not try to shave it off right away. This procedure will be painful and ineffective.

2. Wash your face with a special cleanser. To prepare your skin for shaving, you should cleanse it to protect it from infection and irritation while shaving. Use quality natural remedies... After washing your face, pat dry your skin with a towel.

   Apply shaving oil. Shaving oil is used to moisturize the skin and lubricate the blades, making it easier for them to glide over the skin. Shaving oil is not the same as shaving cream. Place a few drops of oil on your hand and rub it into your beard before applying the cream to make it easier for the shaver to move over your skin. This will also help protect your skin from irritation.

   Steam your face. Typically, barbers use warm towels to warm up your face. This widens the pores and softens the hairs, making it easier to cut them short. Now sometimes for these purposes hot cloth napkins... Temperature and moisture will soften and lift hair and open pores.

   • Make sure the water is not very hot. Water that is too hot will dehydrate the skin and leave it vulnerable. The napkin or towel should be warm, not hot.

3. If possible, apply the shaving cream with a special brush (shaving brush). While this may seem old-fashioned to some, this method of application will soften your beard and moisturize your skin even more. This will also help guide the hairs in the right direction.

   • If you run out of cream, gel or foam, use a hair conditioner or special shaving oil, and if left on the skin for a minute, their effect will even increase. Do not use regular soap as it will leave deposits on the blade and dull it, which will rust even on stainless steel blades. You can use liquid soap as it has a different composition.
   • Choose natural shaving products over glycerin-based creams and gels because they dry out your skin and cause irritation. Choose creams made with natural oils, and other useful tools.

   Shaving

   Start shaving while your pores are open and warm. After washing your face, immediately start shaving while the skin is still damp and the pores have not yet narrowed. This will allow you to achieve maximum skin smoothness. Don't waste time on other treatments at this point.

   Pull the leather tightly with your free hand. Try to create as smooth and even surface as possible. This will be especially useful when shaving areas of the nasolabial folds, as well as the chin. Take a razor with your other hand.

   Shave for hair growth. Run your hand over your beard. In one direction, the hairs will stand, and in the opposite direction, they will lie (in this direction, and you need to shave). To shave off all hairs, keep the blade parallel to the surface of your skin.

   • Shave with short, light downward strokes. This will help you shave your entire face smoothly.

4. Shave in small areas. Shave slowly, carefully, and in a comfortable way. Don't rush like you're late for work. Start on one side of your face and move on to the other, gradually working on small areas of the skin and cutting off all the hairs on them. If you do it right the first time, you will save yourself time and hassle.

   Rinse your shaver regularly. Rinse it in the sink of water, then tap the edge of the razor against the sink to remove any cut hairs. It is important to keep your razors from getting dirty with hair and multi-blade cream, as this will reduce the razor's performance.

5. Rinse with warm water and check with your fingers to see if everything is shaved. Pay attention to the areas around the ears, the corners of the mouth, and under the nostrils.

   • Apply shaving cream to your face and sweep the razor against hair growth. Also pay attention to the hair on the neck and jawline, which usually grows in all directions at once (if you shave only up and down, such areas can be accidentally skipped).

   Finish shaving

   Rinse with cold water and pat dry your face with a clean towel. Cold water will tighten your pores and complete your shave. It can also help stop bleeding from small cuts.

   • If you cut yourself, apply witch hazel to prevent skin irritation. Place damp pieces of paper towel or toilet paper over any scratches that will bleed.

6. Apply an alcohol-free aftershave balm to your face. Aloe and oil tea tree help prevent dry skin and razor irritation. All natural products moisturize and keep skin healthy, so apply a small amount of an aftershave to your skin and rub it thoroughly into the skin you just shaved.

   • Remember that scene from the movie "Home Alone" when the hero puts aftershave on his skin and screams in pain? Yes. After shaving products can burn, but only if they contain alcohol. Avoid using alcohol-based products as they will dry out your skin and cause irritation.
   • To keep the bathroom mirror from fogging up, apply a little shampoo to it.
   • If you have a very thick beard, apply a warm compress before shaving to soften your hair. Change your razor blades often as they will dull faster.
   • Some people enjoy washing their face and shaving in the shower. The steam helps prepare the skin and hair for shaving, and the pressure of the water washes away any residues of cream or gel that may have remained on the skin after shaving. Try shaving in the shower to see if this will be easier for you, although it won't be very convenient without a mirror.
   • Someone manages to shave without the use of gels and creams, using only hot water and a simple razor.
   • Shave in straight strokes only, and the edge of the blade should be perpendicular to the area of ​​skin you are shaving. Since the blade is very sharp, keeping it parallel will cut your skin.
   • Lean over a sink or large container of hot water and cover your head with a towel. Steam your face for 10 minutes before shaving. You will be pleasantly surprised by how much fewer cuts and red spots remain on your skin.
   • The blade should touch the skin at an angle of 45 degrees or less. The larger the angle, the more likely you are to cut yourself. You should run the razor across your face without feeling the razor against your skin.
   • Avoid using pig bristle brush if you have sensitive or oily skin... There are a large number of different shaving creams on the market now. Choose a cream that's right for your skin type. It is best to use badger hair brushes. If you have very sensitive skin, use a soft cosmetic brush, although an electric shaver may be better for you.

   Warnings

   • Shave the hair around your moles and Adam's apple very carefully.
   • Try not to shave against hair growth - this will help prevent ingrown hairs and other problems. If you really need to shave against hair growth, do this: lubricate the skin with gel, shave along the hair growth, and then lubricate the skin again and run the razor against hair growth.

Intimate styling is becoming more and more popular among men and women, but to achieve smooth and sexy skin in intimate places not so simple - it is a delicate business and requires certain skills and abilities. It doesn't matter if you are a woman or a man - it is important to shave your hair without the risk of injury and prevent the appearance of irritation on the skin, and in this article we will show you how to do it.

Steps

Preparing to shave

Trim your pubic hair first. Shavers are designed to shave short stubble and quickly clog and dull when used on long hair... To cut your hair, gently pull up and away from you, and then cut into small sharp scissors or a hair clipper with attachment. You can even use an electric trimmer without rotating heads... Leave only half a centimeter of hair length or less.

• If you've never done intimate haircut you might want to leave short hair for a few days - this will allow you to get used to new sensations.
• If you are lacking in dexterity, it is best to keep the scissors away from such a vulnerable area of ​​the body. You will need to bring the cutting surfaces very close to your skin. Therefore, if the thought makes you nervous, it is better to use an electric trimmer, with which you can trim your hair without touching your skin.

1. Take a hot shower or bath to soften your hair and hair follicles. This will make coarse pubic hair much easier to shave off. This may seem like an unnecessary step, but a hot bath or shower will make your next shave a lot easier.

   Lather your hair to avoid irritation. You can also use unscented foam or shaving gel. It is best to choose a foam or cream that is intended for shaving hair in the intimate area, and not on the face, because these products have significant differences. remember, that shaving hair without cream or foam is not recommended.

   Get the most out of your shave

   1. Take a razor. It's new, isn't it? The newer the blade, the better it will shave. It is recommended to use machines with multiple blades and gel pads on both sides to allow the machine head to slide. It makes no difference whether your razor is pink or blue. If it is sharp and has 3-4 blades, shaving will not only be easier, but also safer.

      • Don't feel like buying new razors all the time? In this case, you should take good care of those that you already have. Highlight one grooming machine and always rinse thoroughly after use. In addition, the razor needs to be allowed to dry as water can accelerate the corrosion of the blades, making them dull faster.

   2. Pull the skin tightly. If you run the razor over relaxed skin, you can cut yourself. Razors work best to cut hairs in a straight and smooth surface... With your free hand, pull the leather tightly and continue to grip it, it will be much easier for you.

      • To make things easier, start at the navel. Stretch the skin above the hairline and move in any direction. The type of intimate hairstyle depends only on your desires. You can shave everything, or you can leave a small area or do something more complicated. Your body is a canvas and you are an artist. However, if you are banned from the bathroom for a few hours to create a masterpiece, people will start asking you questions.

   3. Shave with soft, smooth strokes. It's important to remember the following: shaving on hair growth will avoid irritation, and shaving against hair growth will make the skin smoother. Keep this in mind, but act with your body in mind. If you have very sensitive skin, it is best to shave for the growth of your hair, even if you have to spend twice the time on it than shaving against the growth of hair.

      • If you want a smoother shave, try shaving across your hair. For example, if hair grows downward, shave left or right. Learn to feel the hairs by touch instead of trying to see them. The absence of the need to examine the skin up close will speed up the process.
      • Don't shave for too long... Shave each section just enough to remove hair. Rubbing the razor too much will inflame the skin.
      • At first, you will notice that if you shave your intimate hair for two days in a row, your skin will become covered with red bumps and / or itchy. If so, just take a few days off between treatments until your skin gets used to the changes.

   4. Don't forget about the area between the buttocks. If you have ever done wax depilation bikini area, you probably remember how it seemed to you that everything was over, but then the depilation master asked you to roll over to the other side. Exactly... She needed to get to that part of the body that you completely forgot about. In the case of shaving, it is the same if you want to get rid of unnecessary hair everywhere.

   5. Clean up after you. Save yourself embarrassing moments, show respect for others, and clean up the drain after you.

      • The easiest way is to cut your hair over the toilet, and shave your hair in the shower (at least when it comes to cleaning). Once you're done, take a close look at the plums, floor, towels, and razor. There should be no traces anywhere.

   Shaving is not just a mechanical process, the barber has made a real art out of it. A beard is no longer something shapeless and self-evident, as it was in the past. Now it is a trend and an indisputable indicator of masculinity.

   How to shave your beard properly? How to beautifully arrange the contours at home and create fashionable haircut with the help of improvised means? Below we will sort it out on the shelves.

   If you are faced with the question "shave or grow", then you should take into account that both a smooth face and wearing a beard have their own advantages and disadvantages. Eras change, one trend is replaced by another.

   Now the "beard trend" is coming out on top, as evidenced by the data: the percentage of men who underwent vegetation transplant operations increased 600 times. These are those who, for whatever reason, cannot grow facial hair on their own. Fashion magazines and the style of the stars preach brutal images. How to shave a beard beautifully so that the image corresponds to modern realities? How to take into account all the nuances on the neck, chin, temples? Everything in order.

   If you do not grow a thick beard, there is no hair on your cheeks, hair is thin and sparse,
   -There is a remedy that works for 2 weeks! This is a unique product consisting exclusively of natural ingredients... The result is a thick and beautiful beard!

   Pros and cons of wearing a beard

   Dignity	disadvantages
   Masculinity and brutality for a man are provided	Men with beards look older than their years.
   Behind the cover of bristles, you can advantageously hide skin imperfections: scars, acne, redness, and other undesirable phenomena	Beard repels some women, irritates during intimacy
   A man with a well-groomed beard looks more solid and weighty	Unkempt beard, brings untidiness, untidiness to the image
   No shaving connection, procedures last much less	Additional funds and time are required for care
   V winter time warmer	Stubble problems may occur, it may fall out, dandruff may appear, the beard will lose its attractiveness
   attractiveness The beard makes you stand out from the crowd, adds charm, helps to shape your style.	V summer period with a lot of vegetation hot

   How to prepare before shaving

   Before shaving, the skin and facial hair must be prepared:

   1. Wash your hair and shave areas. It is advisable to do this with hot water and shampoo. The face should be steamed, this makes shaving easier. Wait for your hair to dry.
   2. Comb according to hair growth.

   

   My beard thoroughly and correctly

   Safety regulations

   Rather dangerous tools are involved in the shaving process, these are:

   1. Razors (especially dangerous).
   2. Scissors.
   3. Trimmer type electrical appliances.

   It is very important to follow certain rules of shaving while working.

   Shaving Safety

   1. Do not use blunt razors, blades, scissors. They injure the skin, remove bristles poorly, cause pain, and contribute to the appearance of ingrown hairs.
   2. To prevent the blades from rusting and water getting on the trimmer, store the tool in separate cases.
   3. During transportation, so as not to accidentally injure someone (in most cases, you), the instruments should be in cases or cases.
   4. To avoid hurting someone who walks in by accident, do not swing razors, trimmers or scissors while in the bathroom.

   What do you need to remember when working with electrical appliances?

   1. Read the instructions in detail before work.
   2. Do not allow water to come into contact with the mains powered appliance.
   3. Use the device only for its intended purpose.
   4. Unplug the shaver before washing or dry cleaning.
   5. Do not leave the machine turned on unnecessarily, especially when leaving the room.
   6. Do not insert foreign objects in place of the blades.
   7. Make sure the cord is not damaged before plugging in.
   8. Keep tools out of the reach of children.

   How beautiful to shave a beard

   How to shave your beard to stay trendy?

   

   Basic haircuts

   , or islet

   This design offers two options: with and without a mustache. The vegetation is shaved, framing the chin of the face. The rounded appearance is retained, a small island of hair remains under the lower lip. The aristocracy is emphasized.

   

   Fashionable beard "Goatee"

   Balbo

   Consists of a mustache and a beard, divided into three sections: the cheeks are shaved smoothly, the lower part of the chin is completely covered with stubble. A figurative letter W looms on the chin.

   Van Dyck

   It is a thick goatee in tandem with curved tendrils down. Cheeks are shaved clean, a goatee is formed. The mustache is optionally connected to the chin. Van Dyck flaunts on the faces of Bradley Cooper and Jeremy Renner.

   

   "Van Dyck" beard

   Hollywood

   It consists of a chin and mustache, densely set with bristles. Planting begins from the middle of the cheeks, while their upper part is shaved clean, the neck is also densely covered with hairs up to the Adam's apple. Hollywood Lovers - George Clooney, Hugh Jackman.
   

   French fork

   It is the vegetation extending from the temples, which covers the cheeks, merges with the mustache and forks at the end. The haircut should be started from the temples, smoothly going down to the ends of the vegetation, and at the end, frame the mustache. Flamboyant carrier: Brad Pitt.
   

   Wide tanks

   To style this type of beard, it is necessary to completely lower the tanks to the chin. We start to cut from the tanks and go down to the chin, the center of the chin is shaved, you can also shave off the mustache. Flamboyant Representative: Hugh Jackman.

   Fu Manchu

   Shows a pronounced mustache that blends smoothly into beard stripes, symmetry is required. Manchu Lovers: Travolta, Hulk Hogan.

   Duck tail

   It originates from the tanks, going down, sharply tapering to the chin. The upper part of the cheeks is shaved clean. Symmetry is the key to the success of this model. Representatives: DiCaprio, Mel Gibson.
   

   Rapper standard

   It is trimmed with a thin strip framing the jaw, extending from temple to temple. The thin tendrils blend seamlessly into the main goatee design.
   

   Sparrow

   The antennae are neatly clipped, the beard is cut in the form of a goatee, the ends are braided.

   

   Box

   Vegetation is located entirely from the corners of the lips downward and covers the neck, connects to the tanks, the top of the hair is crowned with a thick mustache. Lovers of this model: George Clooney, Ben Affleck.

   

   It looks like an anchor, focused on the chin, the other part of the face is clean-shaven, antennae on top.

   

   Russian

   This species needs to be grown well and efficiently, the beard stretches from temple to temple. She is very thick and lush, at the top is headed by a wide mustache.

   

   The basic scenario for a good shave

   • Hair length is trimmed.
   • Gel or foam is applied.
   • Shave should start from the cheek area, depending on the intended hairstyle.
   • The next zone is the neck. Adjusted depending on the hairstyle.
   • Then they proceed to the chin, the contours are corrected.
   • They complete the haircut with a mustache correction, move from the center to the ends.

   Required tools and tools

   To trim a beard you will need:

   1. Mirror.
   2. Razor.
   3. Trimmer.
   4. Scissors.
   5. Gel or foam.
   6. Crest.
   7. Towel.

   For steaming the face out of the water, we give preference to hot.

   

   Stages and types of beard shaving

   Let's list the stages:

   1. Growing.
   2. Selection of the form.
   3. Modeling.

   Hair regrowth

   For some men, it is accompanied by difficulties: they do not grow, they fall out, they are located in foci. Problems can be caused by genetics, lack of vitamins, improper lifestyle, diseases.

   Special medicines, vitamins, masks will help to solve problems. There is nothing you can do about genetics, except to join those six hundred percent who transplant hair.

   How to start growing? First you need to have a smooth shave. As soon as the bristles begin to grow evenly and densely, it's time to stop and wait for the desired length.

   Matching the shape of the beard to the face

   When choosing a design, it is important to take into account the shape of your face, otherwise it can turn into unjustified hopes and a spoiled image.

   1. Elongated hairstyles are suitable for chubby faces, square and trapezoidal shapes for those with a triangular face structure.
   2. The unconditional lucky ones are the owners of an oval face shape: hairstyles of any shape are suitable for them.

   Now, on the Internet, you can even find special programs that help determine the type of face and choose the right hairstyle option.

   Modeling the selected shape

   With the help of a trimmer, the desired hairstyle is modeled, clear contours are formed.
   

   The main types of beard hairstyles: Goatee, Balbo, Van Dyck, Hollywood, French fork, Wide tanks, Fu Manchu, Duck tail, Rapper standard, Sparrow, Box, Anchor, Russian.

   The better to shave

   A straight razor or a regular razor is great for a close shave. For tough, thick hair, a double-bladed razor will work. To create a certain hairstyle, a trimmer and scissors are used. Shaving your beard with a trimmer is recommended for contouring and only for light stubble. cope well with dense and long vegetation.

   If you are a fan of quality, traditional shaving with minimal fuss, get a safety razor.

   Let's look at the basic rules of care in order to protect yourself from mechanical injury and always look neat and aesthetically pleasing.

   The first shave is a new lesson in life. The first time, you may cut yourself or miss some areas of your skin. This is fine. Since you are learning to shave, you will be wrong, it is part of the learning process. With practice, the process will become easier and more natural.

   When to start shaving

   One day you will notice that on the chin and around upper lip more dark hair... First, check with the older men in your family whether you have enough hair on your skin to take your personal care to the next level.

   Choose the best location

   No better place for shaving than in the bathroom and shower, where hot steam opens the pores of the skin and softens the hair follicles.

   

   Shave when you are relaxed

   Shaving is a tough job for a lot of guys, especially during the busy morning hours. Alternative option- shave in the evening when you can do it at a relaxed pace.

   Which machine to choose?

   Consider each type, the cost of the razor, how it feels on your face, and how low the hair is cut without irritating your skin.

   • Disposable razors are purchased in whole sets and discarded after five or fewer uses.
   • Other manufacturers sell razors with replaceable cartridges - high quality, double edged disposable blades.

   Important! Change blades or purchase disposable razors about once a week.

   How often should you shave?

   Men shave their faces every one to three days depending on how quickly their facial hair grows. Some guys think that if they grow a beard, they won't have to shave. Regular care of your growing hair is still important.

   Reference! Place your palm against your skin and feel the thickness of your hair to know when to shave.

   How to shave for beginners is described in the video:

   Is it better to use a manual razor or an electric razor?

   You will find two popular types of shavers: electric and regular manual.

   1. Electric razor hair is removed quickly and comfortably on dry skin. But with high hairiness, the procedure should be repeated three to four times a week. Plus, inexpensive electric shavers are slow and don't cover the entire hair section in one pass.
   2. Safety razors are economical, they are T-shaped, disposable and reusable. Also a great advantage of the machine: the hair is cut lower. However, you will need water, cream, or shaving gel.

   If your choice is on a machine, buy double-edged blades in bulk and one blade separately. Usually a blade will be a more significant investment as the blades themselves are relatively cheap. The safety razor blade is unscrewed and the used blade cartridge is manually replaced.

   The best way to use a machine or an electric razor is described in the video:

   Shaving technique - step by step instructions

   You will need:

   • Towel.
   • Mirror.
   • Safety razor.
   • Shaving cream and brush.
   • A container with warm water.
   • After shave moisturizers or talcum powder.

   Shaving technique:

   1. Wash your face or area you want to shave with warm water... Warm water softens hair follicles and encourages skin pores to open. It is beneficial to carry out the procedure after taking a hot shower.
   2. Apply shaving foam (gel) to damp skin... Leave the lather on your skin for a couple of minutes. The blade must never come into contact with the skin without lubrication!
   3. Maintain the correct tilt! Hold the blade with forefinger extended over the top of the roller, the razor blade should be raised at a 30-degree angle.
   4. Clean the blade constantly! Whenever hair is removed from any skin area, soak the razor in warm water to loosen any cut hairs caught between the blades. A clean blade is the key to healthy skin!
   5. Stretch the skin slightly... You don't need to stretch the skin too much, but a little tension will help create a flat surface for the razor to glide easily. The most problematic area is the chin. Paying attention to it, lift the skin of your cheek.
   6. Do not press the machine... For a quality, light shave, always use a sharp razor. The pressure on the dull blade improves shaving a little, but it breaks the hair, does not cut it. Do not put pressure on the machine.

   Be careful!

   

   Funds

   Manufacturers offer a wide range of shaving products: soaps, foams, creams, gels, lotions, antiseptics.

   • Foams and creams Provide a silky feel, allowing the blade to glide smoothly over the skin surface. But some creams can be highly scented, so the choice depends on your personal perception.
   • Gels — a good choice for sensitive skin, as they contain nourishing ingredients to soothe the skin. But the gels can clog the blades and may take a little longer to clean the razor.
   • Soap renders best effect but also dries out the skin a lot.

   The choice of product must be tailored to your skin.

   Hair direction

   You will find that your hair grows in different directions and at different angles (up, down, diagonally) in different places.

   

   The direction in which you style your hair corresponds to its growth, and in which you lift and pull it back is the opposite.

   Reference! Correct shaving technique is like a skier going downhill with a marker flag.

   Shaving against the direction of growth may be the fastest, but it is also the “shortcut” for cuts, damage to hair follicles and ingrown hairs.

   How do you make sure you follow the direction of hair growth? Examine the stubble with a magnifying mirror. To avoid accidental cuts against changing growth directions, use fingertip test strokes and gentle razor slides.

   Care

   How to care for your skin after shaving:

   • Rinse with warm water. Scrub off dead skin cells.
   • Rinse off with cold water. The water will soothe freshly shaved skin, constrict blood vessels and reduce bleeding in case of cuts.
   • Dry your face with a clean, soft towel.
   • Use a generous amount of an aftershave moisturizer that is free of perfume and other potential irritants.
   • Clean and dry the blade. This avoids contamination, mineralization and oxidation of the steel, extending the life of the blades.

   Never apply deodorants, antiperspirants, perfumes, alcohol-based products on freshly shaved skin!

   

   How can you avoid irritation?

   You will likely experience this itching sensation many times when you first start shaving.

   Reference! The so-called "razor burn" appears on the skin after a few hours, as a result of an incorrect procedure. It is an irritating rash that, in a mild form, forms redness, and in difficult cases, leads to abscesses, bumps and nodules due to hairs that have grown into the skin.

   How to avoid irritation? Use our advice.

   1. Mitigation... Use steam and emollients before the procedure.
   2. Exfoliation... Using a scrub, you can bring up potential ingrown hairs and remove dead skin cells.
   3. Use a natural soft bristle brush(for example, badger).
   4. Choose the “right” shaver... Some men use five-blade razors. This is overkill. If your skin is irritated after every shave, consider changing your razor. Find a cartridge with one to two blades.
   5. Consider the direction of hair growth... Making multiple passes in the direction of hair growth is much better than making one pass against it.
   6. Shave lightly... Do not apply pressure to the machine.
   7. Use a sharp razor... If you cut a tomato with a blunt knife blade, its skin breaks. Something like this happens with your face. Replace the blades frequently with new ones.
   8. Disinfect the blade... Bacteria on the blade is one of the causes of irritation. To prevent their formation and reproduction, use ordinary pharmacy alcohol.
   9. Clean the blade before each cut... Residues on the blade of hair and cream interfere with making the next clean cut. Rinse the blade after each pass.
   10. After shaving, rinse your skin with cool water. The water will immediately close the pores.
   11. Use a moisturizer or balm... Apply aloe balm or pharmacy cortisone cream to reduce inflammation. Both of these products help prevent the formation of ingrown hairs.

   How to avoid irritation after shaving is described in the video:

   Remember - everyone has different preferences. Density, growth, structure of hair - all these factors are determined at the level of genetics. You may know guys who barely have facial hair. There are also many teenagers who grow a beard during their school years.

   Choose methods, tools and means to remove unwanted hair that are right for you.