Choosing a table lamp for a student is a very serious matter. And irreparable mistakes here can negatively affect the health of your child.

First of all, the emphasis should be placed not on design and functionality, but on the safety of such a light source.

There are three main components to choosing a good lamp:

• type of light bulb and its characteristics

• tripod and ceiling

• fasteners and location on the table

If the model you like passes through these parameters, then you pay attention to other useful functions and attributes - USB ports for charging gadgets, a clock with an alarm clock, etc.

That being said, do not confuse an interior desk lamp with a schoolchild's lamp.

These are completely different products that perform different tasks.

Type of paw inside the lamp

Today, the stores offer a very rich selection of table lamps, both with simple incandescent bulbs and with LED ones.

Classic luminescent energy saving, one might say, have outlived their age.

Yes, and to engage in demercurization of the room, in case such a light bulb breaks, not everyone is hunting.

Poisonous fumes of mercury in the children's room, this is not exactly what parents want for their children.

Therefore, discard such bulbs immediately.

Ripple factor

Among the other types, you need to choose those models that do not give flicker. Even Ilyich's ordinary light bulb provokes a very heavy load on the eyes.

It's one thing when such light sources hang from the ceiling. And it is quite different when they are located a few centimeters from your child.

Visually, you will not notice such a flicker of light. To test this effect right in the store, just look at the switched on light through your smartphone's camera.

Such a simple and uncomplicated experiment will allow you to avoid mistakes when buying.

There will be no stripes on the screen from a high-quality lamp, only one light spot... The same cannot be said about cheap copies.

For example, in 60-100 watt incandescent lamps, the ripple coefficient reaches 14%. And sanitary standards in a residential area are recommended no more than 10%.

And here the dependence is inverse. The more the lamp power, the less its ripple. But unfortunately, it is practically impossible to buy 150W or 200W heaters.

And they just fit in best with the standard - 5-7%.

Therefore, from a medical point of view, look not at the savings in watts or the design of the luminaire, but at what effect it has on the eyes over long periods of time.

Also, don't forget about safety. What happens if a power surge occurs in your house and it hits a heated incandescent light bulb?

The explosion and destruction of glass in this case is not such a rare occurrence. But it's one thing when it happens inside a chandelier or sconce.

It’s quite different when this happens in front of a child doing his homework.

From this point of view, simple light bulbs in table lamps are worthless.

Also, do not forget that you can burn yourself about them. Yes, and they heat the casings of the plafonds, be healthy, even though the sausage is hot.

So it turns out that the only acceptable option for table lamps today is LED Led models.

Power

What power should you choose? Initially, ophthalmologists developed recommendations for conventional incandescent pads.

Their power should not have exceeded 60W.

Why exactly so many? At more power than 60W, the incident light reflects very well from the white paper of notebooks, books, albums.

The child has discomfort. You want to move the notebook further or raise the lamp higher. As a result, vision becomes strained.

The optimum height of the light source to the table surface is 35 cm.

And if there is a computer on the table, then the lamp should rise above it, and not be located on the side. Otherwise, glare cannot be avoided.

1 of 3

Don't even take into account cute and funny little ones.

But we have agreed that it is not advisable to use sources in the form of incandescent bulbs. So how do you translate these calculated 60W into LED models?

There are tables of correspondence between different types of lamps in relation to conventional ones. Take advantage of them.

According to these tables, 6-8W LED models will be enough for a student's desktop.

However, not all Led fixtures are “equally useful”. The difference in lighting efficiency with the same power can reach almost 40%.

Therefore, here they are guided primarily by such a parameter as the illumination of the working area. What it is, how it is calculated, how not to confuse suites with lumens, and what they all "eat" with, read in detail in the article below.

If the budget allows, then the ideal option would be brands with dimmable and built-in dimmer.

With the same lamp, it will be comfortable to work both with books and notebooks, and at the computer. When working with paper products, turn down the power, and when you go to the monitor, add it.

If the model is not dimmable, take a blank A4 sheet of white paper with you when buying in a store. And place it under the switched on lamp.

If you will not be dazzled, you can safely buy such a lamp and a light bulb for it.

Glow color

Another not unimportant parameter is the glow color. In the working areas of offices or offices, it is preferable to have a cold shade.

It is said to be great for improving concentration and productivity.

However, a warm shade is safer for the retina of the child.

This glow corresponds to a temperature from 2700K to 3200K.

Temperature data can always be found either on the light bulb box or on its body.

Always pay attention to color. Sometimes he can present unpleasant surprises.

The device and design of the tripod and ceiling

It is very important that the tripod is movable. He could fold, change the angle, direction of the glow.

And all this without moving the very base of the table lamp. That is, they put it in one place on the table, and with a movable leg you regulate where and how to direct the flow of light.

Long tripod models should be preferred. The most important thing is to choose the correct angle of inclination to preserve vision, so that the light does not hit the eyes.

And the more positions you have in which you can fix your desk lamp, the better. Because believe me, you need one tripod position for writing, and another for drawing.

The head itself or the plafond should also bend and twist.

Wherein don't choose models:

• which shades are brightly colored

They will be distracting and irritating to the eyes. Best color- neutral (black, white), or dark green.

• with shallow shades

If we are not talking about LED flat versions, but about conical shades, where pear-shaped bulbs are hidden, then the bulb itself should not be allowed to look over the edges.

It must always be completely recessed inside the enclosure.

• with a diffuser in the form of separate large dots on the panel

There are more and more desktop options with non-removable and non-replaceable LED panels. But if some of them are capable of giving an even luminous flux, then others shine, as it were, with separate bright points.

And also count the number of LEDs in these panels. The recommended number is at least 12 pieces.

Although everything may depend on their power. However, with a larger amount, the light will be more uniform.

• made of non-heat-resistant material

Although the LEDs do not heat up, do not forget that this is still an electric device. And no matter how expensive the model is, closures are still theoretically possible.

Mounting and location

An important safety factor is how the table lamp is attached or stands on the desktop.

Comfortable and safe lighting is the most important condition for an effective organization of the workplace for a child school age... It is at the desk that he will perform most of his homework, and the success of the educational process largely depends on how correctly the table lamp is selected for the student.

What you should pay attention to

It is customary to classify table-type lamps according to a number of characteristics, including appearance, operating characteristics, characteristics of a light bulb and other parameters. When choosing a table lamp, it is recommended to pay attention to such parameters as:

• location;
• lamp power;
• dimensions of the lighting fixture, etc.

Placement and fixing of luminaires

One of the main indicators is the installation method. Luminaires are fixed either to the table body (on the edge), or they stand on a leg - static or dynamic. The latter option is preferable because it allows you to change the direction of the light in the desired direction.

The base of the luminaire must be heavy enough to avoid deflection or sliding on the table. Clamp-based lighting fixtures are preferred as they are more rigidly attached to the worktable.

Important! If the child is right-handed, the light source should be positioned to the left of the child. If left-handed, on the contrary - on the right.

A very practical solution is to place the lamp next to the work area rather than directly on the desk. As a result, additional free space appears on the table. These lamps are installed on the floor or fixed to the wall. If such a lamp is placed in the immediate vicinity of the table, from the point of view of functionality, it is no different from the table version.

Light control method

The best option is a luminaire with a switch located in the base or on the plafond. The switch must have sufficient travel and not stick when pressed.

Luminaire dimensions

Lamps with fixation on the edge of the table are equipped with convenient transforming legs, which makes it possible to adjust the installation height of the light source, as well as the angle of the light flux. Installation heights usually range between 20 and 100 centimeters, however longer legs are also available. The most comfortable lighting can be achieved if the leg length is at least 50 centimeters, otherwise the light will reflect off the surface of the book (notebook) or blind the child.

The size of the lamp should be in accordance with the dimensions of the table. This requirement is made not only for aesthetic, but also for practical reasons. If some parts of the lighting fixture protrude beyond the boundaries of the table, then the lamp is likely to overturn by negligence. It should also be borne in mind that an oversized device will not allow other useful items to be placed on the table.

The hardest part of a lighting fixture is its base. This is done on purpose in order to give stability to the table lamp, which makes it possible to increase the safety of the device. However, if the luminaire needs to be moved frequently, it is better to choose a lamp with a light base.

Tripod

The most comfortable lighting is provided when the shade is at eye level. The tripod allows you to adjust the desired height thanks to the presence of folding and retractable mechanisms. There are also bendable (flexible) tripods. Flexible arms for children are especially convenient to use, since they allow you to easily adjust the desired position of the lighting device.

Light characteristics

The main parameter that you need to focus on when choosing a lamp for a first grader (and any other user) is the quality of light. To make the right choice when buying a lamp, it is recommended to understand some of the technical nuances of lighting fixtures.

Types of lamps

Incandescent bulbs are still the most common type of light source. Their main advantage is their low cost. However, they also have significant disadvantages, including not too long service life, high power consumption. In addition, the use of incandescent lamps leads to overheating of the plafond.

Fluorescent lamps have many advantages, including no overheating, long life and cost effectiveness. It should be borne in mind that such a light source is characterized by color distortion, which will adversely affect the child's vision. To make the right choice, it is recommended to look at the abbreviation indicated on the product packaging. The best color rendering when working with graphics is achieved by lamps marked with the letter C. But for reading from paper, you should choose a product that has the abbreviation LTB, since they give a warm white color.

Halogen light sources are characterized by radiation as close as possible to the natural spectrum. Halogen lights provide soft and diffused light. Other advantages of halogen devices include long life and energy savings.

LED bulbs provide quality light. These light sources are equipped with power control, they are economical and last for many months or even years.

Note! LED bulbs are offered with clocks, thermometers, calendars and other useful features.

Lamp power

If the choice fell on incandescent lamps, you should pay attention to their power. Ophthalmologists recommend choosing light sources with a power of 40 to 60 watts. It is especially important to adhere to this advice when it comes to a child. The use of too weak or too powerful lamps will lead to a deterioration in vision (in the first case, there will be poor visibility, in the second, the bright light will dazzle). The maximum allowable power indicator is 100 watts.

The peculiarity of LED lamps is high quality of light at low power. To provide the same level of illumination of a student's workplace as an incandescent lamp, much lower power diodes will be required. For example, a 60-watt incandescent light bulb is replaced by a 10-watt LED device.

The best option is a luminaire with power control. Such a device is more expensive, but it allows for more comfortable lighting. For example, when reading paper, it is better to reduce the lighting power, and when working with a computer, increase it.

Colour temperature

An important indicator of the performance of a lighting device is color temperature. Light sources of the same power characteristics can give different types colors: white, daytime, cold or warm. Cold white light or daylight will quickly fatigue your baby's eyes. It is recommended to use warm colors to illuminate the workplace. The color temperature for comfortable reading should be within 2700–3200 K, the luminous flux should be within 400–700 lm.

Note! For incandescent lamps, the concept of color temperature is not applicable, since they always give only warm light.

Shade and material of the shade

It is not recommended to choose table lamps with too complex shades - this is impractical. The optimal performance of the plafond is in the form of a trapezoid. The trapezoidal shade allows you to most effectively distribute the flow of light and create comfortable lighting for children's eyes.

The color of the shade should not be too bright, so as not to irritate the eyes. It is best if the lamp is soft pastel colors.

Important! The surface of the luminaire should not be glossy. This material gives glare, so you need to choose a luminaire with a matte surface.

An important issue is the material from which the lamp is made. Preference should be given only to high quality plastic. Cheap plastic will not withstand high temperatures and will melt sooner or later. It is not worth purchasing metal shades, since it is easy to burn yourself on them.

Conclusion

Even the most expensive and high-quality table lamp cannot replace natural light for a child. For long-term work at the desk, not only local, but also general light is needed. The brightness of the general light can be low. The best option is combined lighting. In this case, the child's eyes will be less tired during classes.

The choice of an artificial light source in a nursery always requires a responsible approach. The right lighting for the work area helps the student learn by maintaining:

• health;
• working capacity;
• positive attitude;
• attentiveness.

Why is the light source so important?

1. The load on the student's eyes increases with each school year... Modern high quality table lamps reduce eye strain.

2. Any equipment in the children's room should be safe... Lighting fixtures come first. The task of parents is to find a reliable copy that can work for many years, guaranteed without causing harm to the child.

3. The ergonomic characteristics of the luminaire must also be taken into account. No one wants to pay huge light bills or constantly change burnt out light bulbs.

4. Appearance the lighting fixture in the nursery should correspond to the general style of the room, although this is not its main function.

Choosing a modern model

Currently, there are four types of light bulbs that are used in indoor lighting:

• incandescent;
• LED;
• luminescent;
• halogen.

Each has individual characteristics, pros and cons.

It is important to know that for the children's work area least of all fit incandescent and fluorescent lamps... They can be dangerous to use, as the former heats up during operation and the latter contain mercury. It is best to opt for LEDs, which have more advantages than disadvantages:

• emit an even light;
• keep a low temperature during operation;
• contribute to the correct perception of the color of surrounding objects;
• safe.

The optimal power is 8 W, the color temperature should be around 3000 K.

The illumination of the student's desk must be "warm", this characteristic must be indicated on the lamp packaging, and you need to pay attention to it when buying.

Choosing a plafond

It is important to choose the correct artificial light source, but great importance also has a ceiling itself above it. What should you pay attention to when choosing it? Reliable eye protection from direct light flux, and even distribution it on the table surface- these are the most important tasks, with which cone-shaped lampshades, completely hiding the light bulb, perfectly cope.

Hemispherical are also suitable.

And trapezoidal.

Color, design, material are not essential, although doctors and teachers consider the best choice all shades of green. The absence of any decorative elements on the lamp is also desirable.

These characteristics contribute to a better emotional state of the child during classes, help him concentrate, work productively, without overexertion. It is especially important to observe these rules with first-graders, primary school students: they get tired faster, their ability to concentrate for a long time is still rather weak. Excessive decorations (bright pendants, a shade or a stand in the form of funny characters, too bright colors) in the work area will only interfere.

Older students can afford small decorative additions to a laconic lamp.

How to equip a teenager's room and what furniture to choose, read.

Types of structures

The range of models of table lamps is quite wide. How to find the one that will be perfect among them? The best way- on a movable tripod.

They are the easiest to use, they lock perfectly in a given position. A slightly simpler option - a table lamp on a gooseneck.

It is not universal, but quite practical. The least successful choice is considered to be a lamp, the lamp of which is fixedly fixed on the base.

Another important characteristic of a tabletop lighting fixture is its stability. It is best to use models with a secure fit (clamp). A heavy base can also help out, it creates a certain stability, but this design is less safe for the child.

A reasonable compromise - a stable floor lamp with the ability to mix the shade.

Models for a first grader

Parents of future schoolchildren are faced with the task of equipping a full-fledged student's workplace at home for the first time. All the features of table light sources described above should be taken into account from the very first days of class. Correct habits are formed gradually, it is better to immediately accustom the child to ideal artificial lighting.

Say a firm “no” to the desire to please your child by “sweetening” his difficult school days with cheerful light bulbs, more reminiscent of a toy or gadget. Glowing globes, Mickey Mouse, funny ducklings, laser swords should remain in the past. Such lamps are suitable only as nightlights, they perfectly decorate the nursery, but they will not be able to help your son or daughter work on tasks and exercises. The student works at the table, it is important to learn this rule from the very first homework.

7 important nuances

1. Table lamp always located on the "non-working" side, that is, opposite the child's leading hand. Left for right-handers and right for left-handers.

2. The more "mobile" model you choose, the more comfortable it will be for your child. It is better to purchase a lamp with a bendable "leg", a swiveling shade, and a long cord. All these characteristics allow you to create the most comfortable environment during classes.

3. The outer covering of the luminaire should be matt - free from glare. This option is much more practical than glossy.

4. Backlighting directly above the table or placing a sconce is a solution with controversial advantages, it is better to exclude this type of lighting fixtures. They can only be used as additional light sources.

5. Light should be uniformly incident on all areas of the table. If it is too large, then it is better to install two lamps on opposite sides.

6. Even if the child's workplace is equipped right next to the window, high-quality artificial lighting should still be organized. Natural light is ideal, but not always enough. In the cold season, there is so little sun that you cannot do without additional sources of illumination.

7. You should not consult with your child about the model of the lamp that he himself would like to get. Make this choice yourself, taking into account all the technical and ergonomic characteristics of a particular model. Only in this case will she become an indispensable helper for the child along the entire school path.

With the onset of autumn, the parents of all schoolchildren are faced with the most important task - to prepare the child for learning and to make sure that his learning process proceeds as efficiently and safely as possible. And since children do most of their homework within the walls of their home, it is necessary to provide them with normal conditions, which imply correct organization training place.

Particular importance is attached to the choice of the correct lighting that helps to preserve the child's good eyesight and does not interfere with the comfortable assimilation of school material.

Typically, a desk lamp is used as the main source of illumination. The choice of such a lamp is a simple matter, but it is impossible to treat it with disdain. High-quality can be the most of various shapes and power, therefore, it must be selected based not only on the personal preferences of the child, but also taking into account how the training place is organized.

The child's eyes are very sensitive, which means that the light source that will stand on the desk must be given Special attention... In this article, we will take a closer look at the process of choosing and buying a table lamp and give some valuable tips on how to use it.

I am glad to welcome all readers to the site "Electrician in the House" today I would like to publish an article on the topic of choosing a table lamp for a student. What should be guided by and what points should be paid attention to when buying.

How to choose a desk lamp for a student

If you want your child to get tired as little as possible and not suffer from vision problems, then try to take the choice of local lighting seriously. We have prepared several recommendations for you, following which you can purchase an excellent table lamp with minimal financial and time costs. So let's get started.

The financial side of the issue

Most parents go online with one single question, how much is a table lamp for a student? Try to never purchase cheap table lamps.

Of course, each family has its own specific budget, which may not involve high costs for such products, but remember - there is no guarantee that a light source purchased by you at a low price will serve you for a long time. It is better to purchase a middle-class product, the characteristics of which, although there will not be enough stars from the sky, will be able to satisfy most of the needs for high-quality lighting.

Aesthetic look and design

Everyone wants everything in his house to be beautiful and stylish, but children love to be constantly distracted by small details, so it's not worth purchasing a catchy and pretentious table lamp. Buy a luminaire that is made in an office style that will not be designed with bright colors.

The organization of the workplace will not be affected by this, but the child will be able to truly focus on homework and will not pay attention to the environment.

Functional characteristics of the lamp for the student

Before , think about what functional features of the luminaire will be most in demand for you. Convenient switch, the ability adjusting the inclination of the lamp, ease of lamp replacement is essential to ensure effective use light source. We have highlighted several elements of the table lamp that need to be paid special attention to.

Method of fixing the lamp to the surface

The base of the table lamp must be strong and heavy so that the lamp does not tilt or slide on the table top. You can also purchase a lamp with a clamp - attachment to the edge of the table will save you training space.

So a table lamp for a student is attached to the table with a bracket (clamp).

Attaching a table lamp to a desktop with a clothespin.

On the child's desktop, the lamp should be installed on the left side of it (if the child is left-handed, then on the right).

The size of the luminaire plays a role

Forget about small lamps. The light source must be located on a leg at least 40-50 cm long. Otherwise, the light will be reflected from the surface of the notebook or table, and get into the child's eyes, and this is very harmful to vision.

Lighting control method

Luminaires are considered to be the most convenient to use, the switch of which is located on the base or plafond. The on / off button should have good movement and not sink.

Position and tilt adjustment

Currently, table lamps with the ability to adjust the height and turn the shade are very popular. A good gooseneck luminaire is very practical and doesn't take a long time to get ready for use.

Try to choose tall lamps (30-45 cm), because the more the light is scattered, the more area of ​​the table will be illuminated.

Light characteristics of a table lamp

The first criterion on the basis of which it is necessary choose a table lamp for a student- quality of light. We have identified for you three main components that play a decisive role in the process of obtaining quality light.

What should be the power of the light bulb?

Do not under any circumstances neglect the power of the light bulb. The maximum permissible value is considered to be 100 W (for incandescent lamps), but this does not mean that you should stop at this particular option. Experienced ophthalmologists believe that a 60 W light bulb is sufficient to provide comfortable illumination of the student's table. As for LED lamps, when choosing them, you can safely focus on a power of 8-10 watts.

Be sure to ask your child about how he / she feels under this light while doing homework. Try to choose a light bulb that will provide the student's eyes with maximum comfort and will not, at the same time, have a negative effect on vision. If the conditions created by the 60 W light bulb are enough for the child, then leave it. If not, get a brighter light bulb - 75-100 watts.

Luminaire glow color temperature

Be sure to pay attention to luminaire color temperature that it emits. Recently, energy saving and LED lamps have become very popular. Many parents use them to save on electricity. But not everyone knows about such a characteristic as the color temperature of lamps and that lamps of the same power can emit a different color, for example, white, daylight or warm light.

For those who do not know what this characteristic is, I have a separate article on this topic, the color temperature of LED lamps, please come in and get familiar with it.

If you use cold white or daylight lamps in a table lamp, your eyes from such lighting will quickly get tired, which can negatively affect the child's vision. Therefore, if you use economical lamps, then select them with a warm glow temperature. There are certain requirements for the color temperature - it should be in the range of 2700-3200 K.

In addition, try to choose a lighting fixture whose luminous flux does not go beyond the range of 400-700 lm.

As for conventional incandescent lamps, they do not have such a characteristic as color temperature, since they all shine with warm light. And what about the rated power of such a light bulb, then it is most often 60 watts.

The shape and material of the plafond

Try not to purchase desk lamp with overly pretentious shapes of plafonds. The best option is a trapezoid-shaped luminaire. This shape does not interfere with the distribution of the luminous flux and provides the most comfortable illumination for children's eyes. Also, do not forget about the color of the lamp. The correct shade helps to reduce eye strain and helps create an additional lighting effect.

The shade of your chosen table lamp should be made only of high quality plastic. The fact is that cheap plastic is not able to withstand the impact. high temperatures and can melt at any time. As for metal shades, it is also not recommended to purchase them, since it is very easy to burn yourself on hot metal.

Which table lamp is best for a student, LED or energy saving

Summing up all of the above, we can draw the following conclusion - the best table lamp is the one that the student likes and does not harm his health. Having chosen a suitable lamp, do not rush to purchase it. First, check the availability of certificates confirming the quality of the goods, and carefully examine the design of the lamp.

Particular attention must be paid to the quality of the insulation of the wires, since the slightest crack in the cable can lead to a short circuit and the failure of the lighting device. Do not forget about the cartridge - the light bulb should be screwed into it without much effort.

Nowadays, many retailers are advising buyers to purchase energy-saving fluorescent lamps that emit cool white light.

In the manufacture of such bulbs, poisonous mercury is used, so we recommend that you do not succumb to the persuasion of the sales staff and do not make rash purchases. Better buy led lamp or the most ordinary incandescent lamp.

By the way, they are very popular today. lamps with built-in LED panels and several levels of brightness. I am thinking of buying myself one, as soon as it appears, I will definitely make a review.

Safety first

A table lamp is not only a means for obtaining comfortable lighting, but also a lighting device. The use of such a luminaire, especially if there is some kind of malfunction in its device, can be fraught with great danger. Before buying, be sure to check the health of the lamp, inspect the wires and sockets.

In addition, never purchase products whose quality is not confirmed by the availability of appropriate safety certificates. Table lamp for schoolchildren should be reliable, easy to use and practical.

A quality table lamp can play a huge role in educational process... A lot depends on lighting, since a heavy load on children's eyes leads to rapid fatigue and does not allow the child to normally concentrate on mastering the educational material.

You shouldn't run to the nearest store and buy the first lamp that comes across. Carefully study the assortment offered to the buyer, determine the child's lighting needs and only then make a choice.

A lot depends on the table lamp that you buy for the student: from the health and safety of the child to his interest in studies, creativity or hobbies. Therefore, the choice of model is worth paying attention to. In the article, we answer the questions that bother parents and help them find the right one.

Still have questions? Ask them in the comments or call our consultants. You can buy a good table lamp for first graders, teenagers or senior pupils in the MAXUS store catalog. We have state of the art LED lamps that have received ophthalmological approval, and stylish models with quality light and smart features from Intelite.

You can choose and order lighting equipment at any time, after which our consultants will contact you to place an order. We care about customers, therefore we offer convenient delivery by "New mail", different variants payment and product warranty.

Subscribe to the MAXUS Facebook page in order not to miss interesting promotions and discounts on table lamps and other lighting equipment.