Hello Osinochki!
Most of all, this material is suitable for beginners who often think about where to start, this is exactly where my sewing and sewing course began.

No. Name of measurement, formula Points on the drawing cm
1. Shirts length = Di AN 120
2. Shirts width = 1 / 2СГ2 + 3 = 48: 2+ (2 or 3-6) А1Н1 - 26
3. The depth of the armhole = 1 / 3SG2 + 6 = 48: 3 + 6 AG - 22
4. Width of the armhole = 1 / 8СГ2 + 1 = 48: 8 + 1 Г1Г - 27
5. The width of the sprout = 1 / 3USH + 1 = 6.6 + 1 AA - 27
6. Depth of sprout = 2.5-3.5 for all sizes AA 3 - 3.5
7. Neck depth = 1 / 3СШ + 3 = 6,6 + 3 АА4 - 9
8. Inclination of the shoulder PP1 - 1.5
9. Auxiliary points PP2 - 1
G2P6 - 6
G2 2-3 - 3
10. Expansion along the bottom line 12-16 H1H2 - 14

At one time, during the courses, we were given three options for modeling and, accordingly, we had to sew three nightgowns, today I want to show the shirt that I created for my mother.
Nightgown with a set-in sleeve "flashlight", a set-in rectangular yoke with a gather at the front, a frill at the bottom.

on photo hosting →

This shirt was sewn from vintage, thinnest calico from my mother's stock, the very ones that I had to alter when I studied.
Next, we model a shirt based on a drawing of a shirt with a one-piece sleeve, circle the model without a sleeve.
on photo hosting →

When building the main drawing, set aside the width of the shirt without an allowance for freedom, it is already laid down in the pattern itself - the base.

Formations in the front
Shorten the shoulder cut by 1-2 cm, draw a new line of the armhole, in the middle of the front to the bottom from the neck, set aside the length of the yoke 22-26 cm and the width 10-14, apply the lines of the yoke and cut off.
on photo hosting →

To the middle of the front of the yoke, add 1.5 cm - the allowance for the fastener - the fold line and 3 cm for the processing of the one-piece strip, set aside 3-5 from the middle of the yoke (the number of times depends on the size of the yoke) every 1.5 cm, apply the cut lines , cut the pattern along these lines and, when cutting, push its parts apart by 1.5 cm.
When cutting the lower part of the front blade, add, from the fold of the fabric,
4-6 cm for assembly.
on photo hosting →

Building on the back
Shorten the back shoulder by 1-2 cm.
on photo hosting →

Build a sleeve

on photo hosting →

Draw two mutually perpendicular lines with an intersection at point P, from point P upwards, postpone the height of the okat 18-22 cm - point O, from point O to the bottom, lay the length of sleeves 32-36, measure the length of the armhole of the front shirt (back) for example: 28 cm + 4-6 = 28 + 6 = 32 cm and P = 32 cm from point O make notches on a horizontal line, points P1, P2 connect straight lines with point O, divide them into three parts, in turn 1/3, which is closer to divide the bottom of the armhole in half, draw the ridge with a smooth curve. The side cuts can be expanded by 1-2 cm. Draw the bottom with a smooth curved line, apply a stitching line for the elastic
To build a frill, measure the sewing line of the bottom of the shirt, for example: 80, increase this value by 1.5 or 1.7 times, about 140 cm.
Cut out the details of the product, make an increase in the seams of 1 cm, along the neckline - 0.5 cm.
Processing sequence
All processing of a product from a notebook is given without the use of an overlock, then not everyone heard such a word, but now, if there is such a miracle of sewing technique, then it is a sin not to use it.
1. Mark the midpoints.
2. Process the yoke.

on photo hosting →

Fold the allowance for fastening processing (3 cm) along the fold line to the front side and stitch a 2 cm ledge along the upper cut of the neck, bringing the stitch at an angle to the cuts, from the side of the stitches, make a notch in the corner. Iron the sections to the bent allowance so that from the line to the fold is 0.1 cm, turn the corner, straighten, iron out.
on photo hosting →

Bend the entire fastener on the wrong side along the first line "1.5 cm", iron and stitch
on photo hosting →

2 more (I got 5 folds - it depends on the size of the yoke itself and on your desire) finishing folds, iron it.
3. Mark and punch buttonholes.
I placed the first button 1 cm below the neckline
4. Sketch the right side of the yoke over the left, aligning the middle.

5.Stitch amplifiers (squares cut from the fabric of the product 4 * 4) to the corners of the lower fabric of the front from the seamy side.

on photo hosting →

A seam with a width of 1 cm, cut the protruding part of the amplifier to the cuts of the product. This text is from my old notebook, but progress does not stand still and it is better to watch a video lesson from Galina Balanovskaya "Corner in a relief seam" https://www.youtube.com/watch?v=9m8X8PIxHfI
6. Assemble the front part of the shirt (shelf) for assembly, distribute it evenly.

on photo hosting →

7. Attach the lower part of the yoke to the sewing line of the fabric, strictly to the corners of the reinforcement stitching and secure with a backward stitch of 2-3 cm, make notches in the corners on the product. Sweep and stitch the yoke along vertical lines, sweep all the cuts from the inside out together with the amplifier, trimming it to the cut of the yoke and shirt. Press the seams on the yoke and fasten them together at the corners with hand stitches. Again, I repeat, it is better to do it according to Galina Balanovskaya's MK.
8.Stitch shoulder seams with a seam, sew up with a back; I made it easier - I stitched it, processed it with an overlock.
9. Cut out the ruff of the neck

on photo hosting →

Width 3.5 cm, length 90-100 cm

on photo hosting →

10.Treat the upper cut with narrow lace, iron it, secure the cut of the neck with a machine stitch, sweep the ruff to the cuts of the neck, strictly aligning the middle, folding the parts with the wrong (front) sides inward
trim the sections and edging with an oblique inlay 3.5 cm wide, 100 cm long, stitching it from the side of the ruffle.

on photo hosting →

Sleeve
Finish the bottom of the sleeves with lace.
Apply lace to the right side of the sleeve with the wrong side, baste and stitch.

Regardless of the variety of clothes for night sleep, many women still prefer a regular shirt. It does not hinder movements and allows the body to completely relax, thanks to which the rest is truly complete. Since shops do not always offer comfortable clothes at reasonable prices, needlewomen opt for a hand-made reproduction of a nightdress. In addition, the variety of styles and patterns allows you to easily choose the right option. Based on the instructions on how to sew a nightgown with your own hands, you can get a comfortable thing quickly and at no extra cost.

One of the simplest ways to sew a nightie is to make it according to a ready-made pattern. Since most models have a loose fit, one pattern can fit several sizes at once. The model of a nightdress with a one-piece sleeve is equipped with such a versatile design.

The sleeve here is designed together with the base and also has a free shape so that the product does not interfere with the constraint of movement.

But such shirts were worn in ancient times, and most women still want to look modern. Therefore, preference is given to more feminine models that allow you to add a touch of playfulness to the product. Many people like the little thing that bares the shoulders and creates a flirty image.

A dream in a summer night

The offered shirt with straps will be a constant companion of a night's rest in the warm season. In order for the product to allow the skin to "breathe", it is recommended to select natural materials.

To sew such a nightie, you need to prepare:

1. Textile;
2. Needle, thread to match the material;
3. Scissors;
4. Pins;
5. Centimeter tape;
6. An elastic band.

If there is no ready-made pattern, then you can create it yourself. With the help of a tailor's centimeter, the circumference of the chest, waist, hips is measured, the desired length is determined.

The fabric folds in half. A rectangle is built on the basis of the measurements.

The width of the rectangle is calculated using the larger girth measure, to which seam allowances are added. The length increases by 8 cm. Now the silhouette of the product should be shaped. To do this, the lower part expands slightly, forming a trapezoid, as in the photo.

An old T-shirt is perfect for the armhole. On its basis, you can draw the armhole of the future product. The cut blank is cut out.

You should get two parts of the product.

The details are folded together with the wrong side up and sewn along the side cuts to the armhole line. Next comes the processing of the lower part of the shirt. It should be folded and stitched. Then the edges of the armholes are stitched off.

The upper cut of the product is folded over and processed with two parallel machine stitches. The width between them should correspond to the width of the prepared elastic band.

An elastic band is inserted. It is advisable to immediately measure its desired length in order to avoid excessive contraction. The product should be tried on to determine the length of the straps. They are sewn from the remnants of the material in the form of two strips. If you wish, you can arrange the straps with ruffles from the same material.

A modest satin ribbon bow sewn to the front of the shirt is suitable as decoration.

This shirt will suit both a woman and a girl. The only difference is in the selection of material. For a girl, it is appropriate to make a product made of colored cotton, complementing it with ruffles.

A woman, on the other hand, will look more elegant in a cambric shirt with lace. At the same time, you can replace the straps with lace, making them a little wider, and also decorate the bottom of the product.

If you want to slightly open your shoulders, but shoulder straps are too daring for this, you can use a shirt pattern with an additional top insert. To do this, it is enough to modify the basic pattern of the nightdress, while removing the one-piece sleeve.

The upper part consists of a rounded strip of fabric, for which it is quite possible to use an openwork fabric.

A nightgown equipped with a detachable insert, smoothly turning into wide straps, is called a shirt with a yoke. This model is attractive in that it allows you to easily combine different fabrics in the product and bring variety to the product.

Sleepwear in the form of a nightie is widespread among girls. Lovers of elegant dresses do not want to part with a wardrobe item dear to their hearts, even while sleeping. Therefore, mothers go to different tricks, trying to please their daughter and sew an elegant and at the same time comfortable nightgown.

Handy materials in action

It is attractive that when making a nightie for a girl, it is not necessary to stock up on a piece of fabric and select an appropriate pattern.

Can be crafted from a pair of old jersey T-shirts. How to do this so that the baby is satisfied, the corresponding master class will tell you.

For work you will need:

1. 2 old jersey T-shirts (in contrasting colors);
2. Pattern paper;
3. Sewing accessories.

The product is designed for a girl of 5-6 years old. 50 cm is deposited on paper. From the upper end of the segment, 1 cm is measured and fixed with a point.

A second point is laid to the side by 2.5 cm, which connects to the previous one. 6 cm is measured horizontally to the right, and 2.5 cm down vertically. The points are aligned with smooth lines.

A 40 cm line is drawn down, which then goes 20 cm to the right, forming a trapezoidal silhouette.

From the lower end of the initial segment, the next point is laid 3 cm to the side. It is connected by a smooth rounding with the previous mark. The resulting uncomplicated pattern will form the basis of the future product.

One of the T-shirts is ripped at the seams. The pattern is transferred to the material.

Adequate sleep is the key to good health, and you need to create comfortable conditions for it - including with the help of clothes. In comfortable, beautiful, matching pajamas and shirts, you can better rest and always feel “at your best”. When making your own shirts, you are free to choose the fabric, style, length and decor. Any novice designer can create a nightgown with his own hands, especially if he does not get carried away with modeling polo fasteners, cuff decor, numerous frills and other complex elements.

In sleepwear, nothing should interfere, cause discomfort. Therefore, in most cases, a spacious option will be the best solution. The fewer seams in the product, the more pleasant it will be to the touch, you should not complicate the "design". As a basis, you can take the pattern of a classic women's T-shirt or a folk shirt-poneva - loose straight clothes with wide sleeves. In such products, there are only a few details (shelves, backs, shoulder straps or sleeves), so they are easy to cut. Before you sew a nightgown, it is worth taking the time to select the fabric and calculate its quantity.

Selecting fabric and taking measurements

Common materials from which nightwear has always been sewn are flannel, cambric, chintz, thick coarse calico. Knitted fabric is popular today, but it is elastic and has a tendency to stretch. After several washes, the fabric can stretch in width, which is taken into account when choosing a pattern. You should not give preference to loose, shortened models - it is better that initially the thing fit tightly to the figure.

ladyelena.ru

You cannot use the pattern designed for knitwear when sewing products from thick cotton materials. In this case, the static fabric will rupture under tension, and it will be uncomfortable in a shirt. A nightgown made of coarse calico or even thin cotton should be designed according to the drawings intended for them - with a free style, clear lines. Skill is required to work with silky, flowing fabrics, but the patterns themselves can be very simple - "shirt" type.

To determine the fabric consumption and model the product, you need to take measurements of the most voluminous circles (hips and chest), and in case of curvaceous shapes, also in the upper arm. Determine in advance the length of the thing you are sewing, and measure the fabric according to it. In width, a piece of fabric should be at least 2 girths along the most voluminous circle. If the cut is narrow, you will need four lengths and about 20 cm in addition, for hemming.

How to sew a classic nightgown

A nightgown with sleeves according to the "ponevy" model is first drawn on paper in the form of a basic rectangle. Its vertical sides are equal to the length of the thing, and the horizontal ones are measured along the chest with an increase of up to 2 centimeters. From the upper left point (initial mark), you need to postpone a segment of about 7 cm to the right, and 2 cm downward. Their ends are connected with a smooth curve - this is the neck along the back. By setting aside a segment of 8 cm to the bottom, it will be possible to obtain points for modeling the cut along the front.

centrkolgotok.ru

To design a sleeve, the horizontal line is extended by 10 cm from the upper right point of the rectangle and a vertical line of 15-16 cm descends from the end of the segment. From the obtained point, a perpendicular is drawn to the long side of the rectangle and the intersection is marked with a point. 2 pieces of 7 cm are laid from it - to the right and down. The ends of the segments must be connected with a smooth concave curve - this is the armhole.

The last stage of modeling is the design of the bottom. It is necessary to set aside 7 cm from the lower right vertex of the rectangle to the right side, connect the resulting point with the lower mark on the armhole and measure 2 cm up from it, marking the end with a mark. Its smooth rounded curve is connected to the lower right vertex of the rectangle. The template is ready - it is transferred to a piece of matter folded in half. On the seamy side, parts are marked with allowances of up to 2 centimeters.

Further progress of work

1. Cut out the details and sweep the seams at the sides and shoulders.
2. Make a double hem on the bottom and sleeves, bait on a thread.
3. Machine stitch along the swept lines.
4. Cut out an oblique hem, attach it to the product "face to face" and sew.
5. Move the free side to the wrong side, bend the hem 5-10 mm and sew a line.
6. Remove unnecessary threads and decorate the product to taste with lace, braid or other decor.

Based on this pattern, you can easily sew a model with a more complex cut. A detachable yoke and a gusset are added to it.

syl.ru

Shirt on a yoke with a gusset

Those who have been sewing for a long time or know how the masters worked in the past, most likely have heard about the gusset. It is a small rectangle or rhombus made of fabric that protects the product from breaks at stress points. Gussets are sewn in the armpit so that the sleeve does not break, the shirt lasts longer, and its wearer is comfortable. By adding a cut-off yoke to the basic pattern, you will get a modern and aesthetic product for relaxation.

Progress

1. Model a pattern on paper and transfer it to matter.
2. Cut out the details and connect the upper and lower front elements - this will form a yoke.
3. Sew a diamond gusset into the armpit.
4. Machine seams on sides and sleeves.
5. Hem the bottom, carefully decorating it.
6. Make a piping on the neck (you can attach a bias tape).
7. Iron the seams and the product itself.

From under the yoke, you can make gussets in the shoulder area, and draw a drawstring at the bottom of the sleeve to create a "flashlight". In the same way, the gathers are modeled along the neck - a linen elastic or decorative tape is threaded. If you do not want to waste time modeling a yoke, you can sew a spacious shirt by placing the center line of the front 20-30 mm farther than the fold of the fabric. If you are sewing a shirt from a well-draped, soft fabric, you should make loose and wide sleeves, decorated with lace or frills. They will look especially beautiful.

heaclub.ru

Chemise in silky fabric with fine shoulder straps

An elegant shirt made of flowing silky fabric can be sewn without a pattern - by attaching your favorite summer sundress to the fabric. It is pinned with pins at an angle of 45 degrees to the bottom in order to obtain a trapezoidal silhouette, outlined along the contour.

Progress

1. The material is cut out with a margin for seams up to 15 mm.
2. Sweep the seams in the sides from the inside out, lay a machine line.
3. They overlock and iron the finished seams.
4. Decorate the neck with an oblique inlay.
5. Straps are cut out and the places of their attachment are marked on the product.
6. Place a seam up to the marked points.
7. Straps are inserted, covered with a continuous seam.
8. Decorate the shirt.

To sew a shirt, you need a fabric that is two lengths long. Silks are hard to cut and require skill to work with. A durable linen seam works well for sliding fabrics.

If you sew at least a little bit, then for sure, at least once, you thought about the question - how to sew a "nightie" (nightgown) with your own hands, moreover, preferably without a pattern). Well, not entirely without a pattern, but so as not to look for the desired pattern and not "adjust" for yourself. At first glance, the task seems simple ... but we don't need a shapeless "bag", right? I would like to sew a nightgown so that it fits perfectly on the figure. Let only one person see us in a nightgown, but what person is one of the most important in our life! You have to be beautiful even in a "nightie"! But what if instead of the usual nightgown, we set out to sew a silk one with lace? And to sew a few? Silk, cotton, lace, something else ... Moreover, if you have yours in a dress, this is enough to sew a nightgown in different versions. Today we are going to model just such a wonderful nightgown, sewn from natural silk and decorated with lace. It will perfectly suit any woman, and most importantly, it will become your irreplaceable adornment in the dark!

In the collections on the Mia-Mia website, only natural materials are used, but, as I wrote in the last article about robes, you can use any other fabric you like. After all, natural silk is not affordable for everyone, since it is very expensive, so when you choose fabric, pay attention also to all types of artificial silk, chiffons, satin and satin crepe, as well as lace fabrics, because they are also beautiful fit in our case. For finishing, you will need either elastic lace or lace ribbon - a section of approximately 0.8 meters in length.

To start modeling our shirt, we need a basic dress pattern. You can print basic patterns online on our website - they are inexpensive, and the products sewn according to them will fit you just perfectly! Just enter the values ​​of the measurements, and you can print the resulting pattern on a regular home printer.

Here are some more examples of nightgowns that you can sew for yourself or for your loved ones using a basic pattern:

First step. So, let's begin! Generate online on our service, take the front half. Let's take a look at the model features: a detachable yoke, chest darts are moved down, there are no waist darts. Everything is very simple! First of all, we cut our pattern as shown in Figure 1 - stepping back 12-14 cm from the armhole down. And also we outline a new - a shortened bottom line. You can choose the length yourself, depending on your desire. (The main thing is that the length of the shelf in the future coincides with the length of the back). The bottom line is shown in Figure 1 as a red line.

Second step. We close the bust dart, as shown in Figure 2, and thus move it down. In the next step, we will be converting the waist dart into the side seam.

Third step. Let's finish our yoke, beautifully and smoothly filling the top line of the product - in Figure 3 it is drawn in red. And also we put a notch for sewing on the strap - at the highest point of the bodice bend. Plus we measure the length of the strap in front, as shown in Figure 3 with the blue arrow. We write this value - it is equal to a. Now we translate the waist dart into the side seam - it turns out to be strongly concave inward. And since the nightgown should be loose-fitting, we straighten the bottom part of the shelf as shown in Figure 3 with a red line.

Fourth step. Now we take the back half of our pattern and outline the cutting line, as shown in Figure 4 with a dotted line. But since, according to the model, our nightgown has a slightly different shape at the back, we slightly modify the cutting line, as shown by the red line in Figure 4. We measure the length of the strap at the back (blue arrow), this value is equal to b (do not forget to write down.) we forget, and also outline the line of the bottom of the product (the same as on the shelf) and straighten the side seam (red lines below and on the side of the back in Figure 4).

Fifth step. So, please see what details we ended up with: back, shelf and shelf yoke. Now, if we process our products from above with edging, then we measure the following values: x, y, m, n. And we cut out 3 stripes from the fabric, 4 cm wide.The length of the first two strips will be equal to (m + n + 2 cm), and the length of the third strip is equal to ((a + b + x + y) * 2 + 2 cm).

Sixth step. Now let's figure out how to sew a piping. Figure 6 shows the fabric of the product in blue and the edging in black. The dotted line is a machine line. Of course, it will be difficult for beginner seamstresses to sew the edging in one step, so you can sew in two steps: first sew the edging on the wrong side, and then fasten it with the second line from the front side - it will be both more beautiful and neat! Just do not forget that first we process the armhole with two shorter strips, and then, with a longer strip, the neck of the shelf, the straps and the neck of the back. On a longer strip, you must first make a markup so that the straps are the same!

Seventh step. If you don't want to bother with piping, you can buy regular removable bra straps! In this version, we make a hem seam on top (1 cm), and in the places where the straps are attached, we sew small loops from a ribbon similar to bra straps (you can buy it at any sewing accessories store.) Below is a picture with several types of bra straps.

Final touches. Dear readers, we just have to cut the nightgown and sew. The question arises - is this algorithm for constructing a pattern for a nightgown and our pattern as a basis for "formal" ladies? Do not look at the fact that in our photos there are only "slender girls"), thus a nightgown pattern can be obtained and size 56)) for full and simply for very large sizes) You can decorate it with lace, as shown in the technical drawing - on top of the coquette and under the coquette, or you can show your imagination and decorate it in a different way. Also, do not forget to make seam allowances. On all the details along the contour, the seam allowances will be 1 cm (if you are sewing the edging, then we do not make allowances on the top of the product), and at the bottom of the product - 2.5 cm.

Tip: Cutting silk is very difficult because it is slippery and stretches a lot. Therefore, I advise you to cut it on an old bike blanket, or with a duvet cover. Also, don't forget to secure it with tailor's pins!

I wish you success in your creative endeavors! Use our service, build basic patterns online and get creative! Sew beautiful things for yourself and be beautiful!

#shirt pattern #shirt pattern #how to sew a nightgown # how to sew a shirt