It's no secret that a scarf, snood, collar, and coarse knit scarf on thick knitting needles look very beautiful on children. This cool children's snood collar is very easy to knit with knitting needles for a child using thick yarn. We believe that for girls in adolescence A snood collar around the neck is quite suitable. Even if you have never tried knitting, this is a good opportunity to knit fashionable scarf snood We tried to give an explanation of knitting step by step.

This snood scarf or snood collar is knitted from thick Phil Baltazar yarn (60% acrylic, 40% wool, 200 g/117 m). Snood has 3 sizes, for different ages:

• For a child from three to five years old, the size of the snood is 22 centimeters wide and 66 centimeters long.
• For a child from five to ten years old - 22 centimeters wide and 70 centimeters long.
• For a teenager - 22 cm width and 75 cm length.

The simplest knitting is garter knitting, that is, we knit only with knit stitches. Snood knitting density: 10 cm, knitted in garter stitch = 9 loops/19 rows.

To work you will need:

1. Yarn (1-1-2 skeins).
2. Knitting needles 8 mm thick.
3. 4 large buttons with a diameter of 20 mm
4. 6 large buttons with a diameter of 9mm.

Cast on 22 stitches on the needles. Knit with knit 1) 66 cm, 2) 70 cm, 3) 75 cm. That is, the width is the same for all sizes, only the length differs. If possible, estimate the length for the child (the snood should overlap). Close the loops of the snood. We sew 4 buttons, retreating 3 rows from the edge of the snood, check that the distance between the buttons is the same. Separate 3 loops from the top and bottom from the edge. We form the buttons on the bevel after we have figured out the “overlapping” crossing. We place a button under each button, and we also sew buttons on the bottom fabric. At the back, we pick up the collar flap with an invisible seam.

Here is another similar snood, only with one button. The yarn is very bulky (80% acrylic, 20% wool, 100 m/170 grams).

The yarn is like this, very thick:

In order not to make mistakes in the calculations, you need to cast on 20 loops on knitting needles 9 mm thick, knit 10 rows, and see how many loops are contained in 10 cm. This way we will find out how many loops to cast on the knitting needles.

To work you will need:

1. Bulk yarn - 1 skein.
2. Circular knitting needles 9 mm thick.
3. Button - 1, diameter 20 mm.
4. Buttons - 3 pcs.

Scarf width - 22 centimeters, length - 66 cm. In order to knit this children's scarf, you need to cast on about 65 loops on the knitting needles. This snood scarf is more convenient to knit on circular knitting needles, as it is knitted wide. But if you don’t have circular knitting needles, try knitting with regular knitting needles, but you’ll end up with tight knitting. We cast on 65 loops (the number depends on the thickness of the yarn), and knit 15 rows in garter stitch (knit). Close the loops, sew on the button and internal buttons.

Another snood scarf that can be knitted is a snood with a lapel. We knit from thick Lion Brand yarn (80% acrylic, 20% wool, 100 m/160 g. Snood width - 22 cm, length - 66 cm.

To work you will need:

1. Yarn - 1.5 skeins.
2. Buttons - 4 pieces.
3. Buttons - 4 pieces.

Cast on 22 stitches and knit 8 rows in garter stitch (knit).

9th row: knit,
10th row: purl,
11th row: purl 22 stitches, add 1 loop.
12th row: knit 23 stitches.
13th row: purl 23 stitches, add 1 stitch.
Row 14: purl 24 stitches, and so on.

Increase until there are 33 stitches on the needles. The lapel can be knitted in garter stitch, or with a 2/2 rib, like the bottom of a scarf. We knit up to the 48th row, this is the middle of our scarf, and then we knit in a mirror sequence. Make sure both halves are symmetrical. Close the knitting. Sew on buttons and internal snaps.

We knit an excellent version of a snood collar. The pattern consists of alternating knit and purl stitches, the diagram is attached. Such a collar can be worn downwards, around the neck, under a jacket, or up - over the hood. Such a collar is especially relevant in winter, in frosty weather - this way the lower part of the child’s face will not freeze.

To work you will need:

1. Woolen yarn Baby Wool (200 m / 50 g) - 2 skeins.
2. Circular knitting needles 4 mm. You can knit on simple ones (3.5 mm), and then sew the fabric.

If you knit a collar on knitting needles 3.5 mm thick, then the number of loops increases. The width of the snood collar is 52 cm, its height is 24.5 cm. If you want, you can tie it higher - it all depends on whether it is comfortable for the child. Height 24.5 is the best option.

Cast on 80 stitches and knit according to the pattern:

1st row: knit 1, purl 1, knit 1, purl 1. - repeat until the end of the row.
2nd row: k1, p1, k1, p1. - repeat until the end.
Row 3: P1, k1, p1, k1. - repeat until the end.
Row 4: P1, k1, p1, k1. - repeat.

Then we repeat again like the 1st row. The result is a “tangle” pattern. If you knit on circular knitting needles, mark the beginning of the row with a pin. Next, we repeat our knitting to the height we need (we measure with a ruler or meter). In this collar model, you need to knit up to 21 cm (58 rows), and then knit with an elastic band 2/2 (k2, p2) another 3.5 cm (7 rows). We finish knitting the collar and close the loops.

We think that we will not reveal the secret if we say that a scarf or shawl with long stripes is the hit of the season. The strips can be knitted to any length you like. We sew the strips to the scarf at the end of the work. They can be narrow or wide. The stripes usually end in tassels or fluffy pom-poms.

How to make tassels for such a scarf? Take a cardboard the right size, pull the thread over the top, and wind the required amount of yarn on it - the more threads, the more magnificent the tassel. Next, we tie the top thread tighter, and make another tie lower, also tighten it. Cut the bottom of the tassel with scissors.

Scarf "snood" - original item a wardrobe that will simultaneously warm and decorate a woman. It's not difficult to knit it yourself. This article offers many interesting patterns and methods of knitting “snood”.

Scarf “Snood” is one of the most fashionable and modern scarves. It can be successfully worn by young girls and mature women, since he Fits most styles and looks. Its advantage is that it always “keeps its shape” and does not need to be endlessly twisted around the neck, choosing your own special way of tying.

Such a ball has the shape of a pipe. All you have to do is just put it around your neck and over your head and it's will take on a baggy, voluminous shape, covering your shoulders. Some scarves are designed to cover your head, replacing a hat.

“Snood” made of multi-colored threads

Patterned "snood"

Volumetric "snood"

“Snood” with large viscous

Long snood

“Snood” in garter stitch

If you cannot choose a scarf that suits you in stores, you can easily knit the snood yourself. To do this you just need choose your favorite technique and have a diagram. The advantage of a scarf is that it is easy to knit even for those who do not have special skills and skills.

Snood diagram and description:

Simple "snood"

What knitting needles should I use to knit a snood?

Beginning needlewomen will definitely want to know all the details of knitting. One of the important conditions is correctly selected knitting needles. Many factors depend on the knitting needles: your comfort, the size of the product and, of course, the knitting density. The most convenient are considered knitting needles “No. 9” or “No. 10”, but you can choose absolutely any according to your preference.

This product should only be knitted handkerchief method. That is, you are recommended knit only from knit stitches. This will add a characteristic volume to the scarf. It is recommended to tie the ends of the “snood” using a hook; if you do not know this technique, use regular threads and carefully sew the ends.

The so-called "Circular knitting needles" Such knitting needles are connected with a rope, on which the knitting is held. These knitting needles allow you to get a perfectly even scarf without seams.

Video: “How to make garter stitch?”

How many stitches should I cast on on a snood with knitting needles?

It is worth noting that knit so warm and beautiful scarf not difficult. Depending on what size you want the product, you should choose the number of loops: for example thirteen, fifteen, nineteen and so on.

The larger the scarf, the more folds it will form when folded, thereby it will be more beautiful to “sit” on the neck.

There are two simplest ways to knit a snood:

• Like the simplest scarf, the ends of which are tied together at the end of the knitting. The result is a circle that can be worn around the neck.
• To knit using "circular knitting needles" so that you don’t waste time tying up the ends later.

Special “circular” knitting needles

Knitting a snood with knitting needles: which pattern to choose, patterns

The best part about creating the “perfect scarf” is that When knitting, you can choose any pattern which you like: pearl, openwork, braids, voluminous or regular satin stitch. Best choice for work wool threads– they are natural and retain heat perfectly. If there are no wool threads, try to choose those that have at least 50% wool in the composition.

Scheme:

Option #1

Option No. 2

Option No. 3

Snood knitting: sizes for adults and children

To knit a product, you must know its size. This way you will know exactly the number of threads required.

Size table:

Following from this, you definitely need to know how many threads are useful for knitting:

Snood on circular knitting needles

Circular knitting needles are real “helpers” in knitting such a scarf, because they are the only ones will be able to knit products without any seams or stitching. Every needlewoman can master the methods of knitting on such knitting needles, because they simplify the work as much as possible.

Scheme:

Option #1

Option No. 2

Snood in the round with knitting needles, how to knit?

If you don’t like circular knitting needles, then you can use with the most ordinary knitting needles. For snood, it is best to give preference to needles No. 9 or No. 10. You can even choose even larger ones. Large knitting of a scarf in a circle will give it volume.

How to knit a snood in the round?

Scheme

Snood in one turn with knitting needles: diagram with description

"Snood" in one turn suggests that the scarf will look like a small ring. Such a "snood" You cannot wrap it twice or three times around your neck. This is all its advantage - it is simple and always able to “keep in shape”. This scarf is suitable for both an adult and a child who does not like to spend a lot of time getting dressed.

Scheme:

Option No. 1 “with bumps”

Option No. 2

Snood in two turns with knitting needles: diagram with description

“Snood” in two turns looks like a large ring that can be wrapped twice around the neck. This product looks impressive on the neck, as it looks large and voluminous. In addition, the “snood” in two turns does not need to be wrapped tightly around the neck, but leave it hanging freely on it.

Scheme:

Scheme

How to wear a “snood” in two turns?

Snood with garter stitch knitting needles: diagram with description

Garter stitch allows the product to be quite tight and even a little "spring back". This is perfect for snood. Garter stitch assumes that you will only do facial loops on both sides.

Video: “Garter knitting for beginners”

Snood made of thick yarn with knitting needles: diagram with description

Thick yarn will help your product to be very thick and voluminous. It is suitable for snoods one and two turns. Knitting is a little more difficult for her than thin threads, but in the end the process itself happens faster. A bulky “snood” made from large yarn can reliably protect your neck and head from hypothermia, and also protect from the wind.

Scheme:

Option #1

Option No. 2

Double-sided snood knitting: diagram with description, pattern

"Double-sided snood"- this is a scarf that has related patterns, both from the front and from the back side. As a result, the scarf can wear any of your preferred sides. This type of knitting is much more complex than regular knitting, but it looks impressive and very “expensive.”

Scheme:

Option #1

Option No. 2

Option No. 3

Snood with knitting needles made of fine yarn knitting patterns: pattern and diagram with description

"Snood" made of fine yarn - a lightweight version of the scarf. It can be worn in warmer times: autumn or spring. He similar in its knitting technique to lace and always adds femininity to its owner. Such a scarf can have one or several turns.

Scheme:

Option #1

Option No. 2

Option No. 3

"Snood" made of fine yarn

Snood knitted from melange yarn: diagram with description

Melange yarn differs in that the thread that is in the ball has several colors and shades. As a result, as you knit, the product may change its color. For example, it can flow from yellow color V green color or just have several shades in each loop.

Melange thread is very popular in modern knitting. Not only scarves are knitted from it, but also any other item of clothing. This thread allows the snood to look voluminous and match many other wardrobe items.

Scheme:

Melange snood

Snood made of grass with knitting needles with a description of how to knit?

"Grass" — this is a special type of thread for knitting. It has a “lush” structure, created from many thin threads sticking out in different directions. This scarf looks very voluminous, it looks very “fluffy” and warm. You may not get the hang of knitting with grass the first time due to the originality of the thread. The product looks especially “successful” when combined with fur products.

Video: “Scarf in 30 minutes”

Now the time has come to warm up for winter, and you want to choose something interesting, don’t you? Did you know that this season the scarf collar with knitting needles is extremely popular - the patterns and descriptions are so varied and simple that you can make your look simply incredible. Let's dream together, or better yet, move from fantasy to action and create a super stylish look that even Hollywood stars will envy. And photo and video diagrams will help us with this, as well as detailed instructions How to knit a snood collar with a circular scarf using knitting needles. Let's begin!

Before we look at the most popular and trending designs this season, we should clarify some details.

1. Of course, first decide on the choice of thread. They should not be too thin, choose not only your favorite color, but also good quality yarn. Let the composition contain at least 50% natural threads (wool, angora, mohair).
2. The next step is the knitting needles. If you don’t yet have knitting needles and are new to this type of needlework, we recommend purchasing circular knitting needles with a thickness of 4.5-5 mm. They are just right for beginners.
3. And the third stage - practice knitting a small piece, the so-called trial version.

While you are not a pro yet, try to master the following knitting methods:

• Polish gum.
• Faceted gum.
• Garter stitch.

Polish gum

The photo shows the finished product knitted with a Polish elastic band. Consider also the pattern according to which you need to knit this wonderful beauty. And here is a small instruction on how to knit a scarf collar with knitting needles using this particular type of knitting.

1. Dial required amount loops To make a knitted snood like the one in the photo, you will need 110 stitches (or a multiple of 4, plus 2 edge stitches). The finished product will have a total length of about one and a half meters.
2. We knit all the loops and connect them into a ring.
3. Let's move on to knitting the first row. To do this, we follow the repetition: 3 knit stitches, one purl stitch.
4. Second row: knit 1, purl 1, knit 2.
5. Third row: repeat knitting along the first row.
6. The fourth row is similar to the second.
7. We knit according to these instructions until the snood reaches the required width. Next we close the loops.

Faceted rib and garter stitch

The set of loops is the same as when knitting with a Polish elastic band.

1. First row: knit 2 knit stitches and 2 purl loops, at the end of the row 1 knit stitch, and then an edge stitch;
2. Second row: purl loops - 2 pieces, knit stitches - 2 pieces, 1 purl at the end of the row, then an edge loop.
3. Alternate rows until the scarf reaches the required width.

Faceted elastic can also be combined with garter stitch.

1. We cast on 80 loops and 2 edge loops.
2. We knit 80 rows with faceted elastic.
3. Next comes 6 rows garter stitch: remove the edge loop on the right needle. Next come the front loops, behind the front wall. The last stitch in the row is a purl stitch.

You can also knit this colorful option

Choose green, turquoise, dark green, blue-green, yellow threads. The knitting needles are naturally circular. The knitting method here is stockinette stitch. We knit the first row with knit stitches, the second row with purl stitches. To begin with, we cast on 80 loops, and then knit 40 cm in each color using the stockinette method. At the end of the work, close the loops.

Knitting a scarf collar: video tutorials for every taste

Another way to learn how to knit a scarf collar is, of course, to watch video tutorials on our page. This is very convenient for both beginner knitters and experienced knitters. Thus, by viewing patterns online, you can repeat the pattern after the master and create your own masterpiece.

We draw your attention to this knitted collar with an original pattern. By the way, using this pattern, you can knit a children's circular scarf that will look very cute on the neck, and most importantly, fit snugly to it without tightening or creating discomfort. You can even make the same collar for a dress or a sweater - the model will look simply amazing.

So, let's get to work. We take threads that contain 50% wool and 50% synthetic yarn. We select knitting needles with a thickness of 6 mm.

1. At the first stage we knit a cross braid. We cast on 16 loops. We begin to knit row 1: remove the first loop, knit the second with a purl loop. Next we knit 12 loops with knit stitches. The last 2 loops are purl.

• We knit the second, third and fourth rows in the same way - where we have knits, we knit knits, etc.
• Fifth row - remove the first loop, purl the second. We take an additional knitting needle, remove 3 loops on it, leave it in front of us and knit 3 loops from the main knitting needle, and then 3 loops from the additional one. We continue to knit according to this pattern until the end of the row. The last 2 loops are purl.
• The sixth row is similar to the first.
• We turn the work over and start from the first row. We will knit cycles of 6 rows until we get a scarf that is 56 cm long (based on an adult). To ensure you get everything right, you can periodically rewind the video and view the instructions from the very beginning.

1. Second phase. When we knit the entire product, we need to connect its 2 edges. To do this, we cut the working thread on one side, thread a needle into it and begin to sew the 2 edges. To do this, from the near side we pull the needle into 2 consecutive loops, and then transfer the needle and thread to the second (far) edge of the scarf.
2. The braid is ready. Let's move on to third stage of knitting. Now we cast on 108 stitches along the cross braid in a circle and begin knitting with pearl stitch.

• First row: knit stitch, purl stitch, knit stitch, purl stitch. And so on until the end of the row.
• Second row: swap knit and purl stitches. Where there were knit stitches, we make purl stitches and vice versa.
• We alternate rows and knit with pearl stitch 5 cm from the transverse braid.

1. Fourth stage– we knit 4 cm with a 2x2 elastic band. That is, 2 knit stitches, 2 purl stitches.
2. Fifth stage- close the loops.

How to tie a scarf-collar?

So you have created your own unique scarf-collar with knitting needles. The only thing left to do is tie this beauty so that you feel comfortable and cozy wearing it. There are many ways to tie a snood scarf. You can see some of them in the video. After all, this wonderful accessory can be worn as a hood or hat, wrapped around your shoulders, and generally worn instead of a tunic. It all depends on your imagination and your desire to be original and stylish.

In this article we will tell you what the standard should be snood length two turns , let’s also talk about the comfortable width of the product and the yarn consumption for it.

At first glance, it seems that what could be simpler than a snood, a simple product that resembles a pipe around the neck? However, many knitters face problems when making it. First of all, in calculating the optimal length and width of this important item for the cold season.

The length of the snood is two turns for an adult: what we started from

Having examined and studied a wide variety of descriptions and recommendations for knitting, we came to the following conclusion. The most popular and comfortable size of a two-turn snood for an adult ranges from 140 to 170 centimeters long, 25 to 50 cm wide .

This product not only looks beautiful, it is also comfortable to wear. In it, the neck is not blown out and does not get lost in too voluminous folds. Also, if desired or necessary, such snood length two turns allows you to use it as a hood.

In the latter case, we note that the wider the snood, the more convenient it is to use it as a hood. But if you need a snood that “sits” on the neck quite narrowly and gathers in beautiful folds, it is tedious to choose a shorter length and width.

Another tip from experienced knitters - two turns must correspond to the “wingspan”. IN in this case This refers to the distance between your straight and outstretched arms.

Useful tips for calculating the length of the snood in two turns and the number of loops per different models snoods taking into account patterns and knitting density:

Yarn consumption depends on the complexity and volume of the pattern, the thickness of the yarn and knitting needles and the knitting density. A two-turn snood knitted with garter or stockinette stitch with medium knitting density requires 250 grams of yarn. On average, a skein of warm yarn contains 150 grams or 120 meters, so in total we will need 2 skeins of this yarn for a snood.

Two-turn snood with knitting needles - a simple but effective model with a description of the work and assembly process

A cowl collar is one of the most versatile clothing items. Its simple design and countless options for use and production make it the hero of a huge number of fashionable looks.

Buying such a collar can be a challenge, especially if you need to fit it seamlessly into your existing wardrobe. The most successful solution is to knit a scarf-collar with your own hands. From this article, the reader will learn how even a novice needlewoman can independently knit a collar collar with knitting needles and create a variety of interesting models.

The circular collar (collar) is represented by the following model options:

• circular scarf;
• knitted item;
• independent product;
• a product of continuous loose knitting;
• knitted with thick fabric;
• models based on openwork patterns.

Collars in the form of collars and circular snood scarves can be knitted both for decoration from light cotton or silk threads, and for wearing in the cold season from warm yarn.

Throwing it over your shoulders, wrapped around the neck, placed on the head as a hood, rolled up in an unusual way or pinned with an unusual brooch, its owner can show off a new outfit every day.

Men also include it in their everyday arsenal because it is practical and especially effective as a scarf and hood. In addition, a knitted collar-scarf can be not only an independent product, but also an interesting detail of a parka, dress, sweater or sweatshirt.

The collar can be sewn from ready-made knitted fabric or knitted. Similar products are knitted with patterns such as:

• openwork;
• arans;
• jacquard;
• braids;
• facial surface;
• patent patterns;
• garter stitch;
• rubber.

For knitting circular collars use:

• fork;
• regular hook;
• Tunisian hook;
• flexible knitting needles;
• circular knitting needles;
• knitting needles are straight.

When creating circular scarves with your own hands, you can work:

• on one circular knitting needle - more often used when knitting together with a dress or sweater;
• on two knitting needles - very convenient for knitting long circular scarves;
• on four knitting needles with one working needle - convenient when knitting a collar, the loops of which are cast on along the neck of an almost completed sweater.

Structurally, circular scarves-collars can be either rectangular or trapezoidal, gradually expanding.

The choice of tools, yarn and type of knitting is carried out in accordance with the desired properties finished product. It should be remembered- how finer yarn, the softer and more plastic it turns out. Thick, coarse yarn allows you to create clear, graphic shapes.

If the product is created without using ready-made diagrams and descriptions, in order to determine the required number of loops, it is necessary to knit a square sample with sides of ten centimeters. A simple calculation will help determine how many loops and rows are needed to obtain a product of a given size.

Simple knitting patterns circular collars, the descriptions of which are given below, can be mastered even by a novice craftswoman. By adding an interesting border to a collar knitted with your own hands on two knitting needles or by knitting loops for a fastener, you can get a unique accessory from a simple rectangle.

Description and diagrams of simple cowl collars and scarves

Basic diagram of a clamp as a separate accessory

In its simplest form, this product is a rectangular fabric, sewn into a single piece or decorated with a fastener with buttons, snaps or a zipper.

To sell the product, cast on loops on the knitting needles, the number of which will allow you to obtain the specified width of the canvas. It can be equal to the height of the clamp if you plan to make it single, or be twice as wide or more if you decide to knit a double-layer clamp or wrap it several times.

Mark the wrong side.

The first row, after casting on the loops, knit with purl loops.

The second - with facial loops, starting with the first one not knitted and removed onto a working needle edge loop. Next, knit in garter stitch (all rows are knit), stockinette stitch (all even rows are knit, and odd rows are purl). You can also knit with rib (1x1, 2x2x, 3x2, etc.). When choosing a pattern, keep in mind that garter stitch is denser than stockinette stitch. Both of these patterns look good if made from fluffy yarn, and also from knotted yarn and yarn with beads included.

Having reached the required length, sew the smaller sides of the rectangle from the wrong side.

Crochet the finished scarf-collar and steam the product to even out the fabric.

As a variant of the pattern, knit the product with patterns such as:

• pearl;
• pearl large;
• rice;
• large rice.

Variant of the scheme of a trapezoidal clamp connected by an independent product

The trapezoidal model looks more voluminous and looks good in the autumn-winter season. Work begins with measurements and a set of loops, the number of which will allow you to get a piece that freely covers your shoulders. You need to measure the shoulder circumference, neck circumference and width (height) of the collar. In general, the latter size is chosen in the range from twenty to thirty centimeters. Greater altitude will give greater volume and depth of the product.

Having cast on the loops, knit four rows with the selected pattern and begin to form a trapezoid, evenly decreasing the loops as follows:

• seven times in every fourth row in the first half of the collar (to the middle of the height);
• seven loops in every second in the second half of the clamp, until the number of remaining loops is less than the initial number by at least a third.

Having completed the fabric, close all the loops.

You can knit on two needles, on four with one working or on circular ones. If the work will be done on circular or several knitting needles, at the end of the first row do not turn it over and do not make a row transition.

Working on two knitting needles, think about the type and design of the fastener. It can become an interesting decorative individualizing element.

It is useful to tie the lower and upper edges of the finished product with a simple or decorative border. You can add fringe along the outer edge of such a product or decorate it with tassels, cones or pompoms.

A variant of a knitted collar as a decorative element of a sweater, sweatshirt or dress

It is most convenient to knit such a product on circular knitting needles, casting stitches along the neck of a dress, blouse, sweater or sweatshirt.

In case of direct version the fabric is knitted with the chosen pattern without any increments to the required length, upon reaching which all the loops are closed and, if desired, the resulting edge is tied.

In the case of the trapezoidal version, increases begin from the second row from the set one. To do this, 8-10 added loops are evenly distributed along the entire length of the row. Then, before the beginning of the second third of the height of the clamp, six increases are made in each even row.

In the second third, six loops are added in every fifth or sixth row so that the final number of loops becomes twice the initial number.

In the last third they knit straight, without changing the number of loops.

Decorate the edge of the finished piece with regular crochet, embroidery, border, beads, tassels and other decorative elements.

Pattern of a knitted circular scarf with a spiral pattern

A DIY circular scarf-collar is a practical and versatile accessory that will not only protect from autumn winds and winter cold, but will also become a unique addition to casual outfits and to outerwear.

We suggest knitting a warm collar scarf with a spiral pattern on knitting needles. Following the description, you will complete the task in a couple of evenings.

Prepare size 8 circular needles at least 60 cm long and 200 g of thick yarn for a medium-sized scarf or 300 g for a large scarf.

To calculate the dimensions of the product using stockinette stitch, knit a square sample with a side of ten centimeters (10 loops in length, 13 rows in height).

Cast on as many stitches as necessary to obtain the desired length. The number of loops should be a multiple of six plus one loop. Without turning the work over, mark the beginning of the row with a colored thread and continue knitting in the round from the first stitch cast on.

From the first to the fifth row, knit the pattern according to the following pattern: *four knit stitches and two purl stitches*. Repeat this until the end of the row.

From the sixth to the tenth row: knit first purl loop, then knit the pattern *4+2* to the end of the row.

From the eleventh to the fifteenth row: purl the first two loops, and then knit the pattern *4+2* to the end of the row.

You may notice that the product, thanks to this knitting, begins to twist in a spiral.

Continue working until you reach the desired scarf width.

Fasten the thread.

If desired, crochet the edges or decorate them in another convenient way.

Now, even with basic knitting skills, you can create an unlimited number of different accessories.