More recently, in Russia, people began to relax in New Year holidays the whole family. Not only schoolchildren and students, but also the working population have the opportunity to visit relatives, take a walk, play sports and devote time to their favorite hobbies.
Decorating interior items using technology is gaining increasing popularity among the fair sex. You can decorate this way not only cutting boards, photo frames and other small things, but also bottles, for example, with champagne. These works will decorate the table, refresh it, and make it special. Even if you didn’t have time in the bustle all year to master new technology creativity, this can be done just in time for New Year's days.
In this master class, we will consider the technique of direct decoupage from a file, in which we will apply the design on the bottle in a circle, overlapping edge to edge. When decorated directly with a napkin, the champagne will stand and not lie on its side, as when gluing a small motif.
Here it will be useful to define the terms used by the masters of this technique.
A motif is a drawing from a napkin or decoupage card that will be placed on the surface. Primer is acrylic paint or a mixture of paint with PVA glue, which is applied to the glass in the first and second layers.
For decoupage, PVA glue, slightly diluted with water, is usually used. It is also important to remember that when wet, the size of the napkin increases by approximately 0.5 cm on each side, which is very noticeable if you first apply a dry napkin to the surface to determine the boundaries where the motif will lie.

Materials and tools

The craftswoman should always have toothpicks on hand, cotton buds, sheets of paper or newspaper, cotton wool. All this can be found in every home. Pay attention to the reasonable arrangement of the workplace, to protecting your hands and face (especially eyes) from exposure to varnishes and paints. Therefore, it would be a good idea to purchase gloves, masks, etc. In addition to the above, prepare:

• acrylic paints: white and pearlescent;
• regular brushes, like those for watercolor paints;
• a sponge sponge or a piece of dry dishwashing sponge attached to a clothespin;
• acrylic lacquer;
• the finest sandpaper;
• acrylate putty for decorative work;
• napkins of a suitable theme, I took New Year's ones;
• twigs artificial Christmas tree, real cones;
• for artificial snow, foam balls;
• PVA glue for paper and cardboard or construction glue;
• scissors;
• stationery file, preferably dense.

Inspiration, creative message and free time, and good mood. The work may take several days, since each layer must be thoroughly dried, but using a hairdryer it can be sped up to several hours.

Beginning of work

Buy good quality champagne.

As in the case of remaking an old one, before applying any type of coating, you need to remove the old decorative layers. When decorating a bottle, these are labels and excise stamps. First I soak the glass in water, then remove the label with a brush. Residues of paper and glue can be easily removed using vegetable oil and sandpaper, rubbing the bottle vigorously.

Choose a napkin in advance.

Before you start priming the glass, degrease it with window cleaner or alcohol.
Add PVA glue to the paint and prepare a foam sponge.

Apply the primer to the surface using small, dotted movements.

Two or three layers are enough. Let the bottle dry or dry it thoroughly with a hairdryer on all sides.
Now take some fine sandpaper and sand the surface.

During the sanding process, you will realize that the grain is not completely removed. In order to prepare the surface for decoupage from a file, take acrylate putty.

Apply the thinnest layer of paste to the bottle. To do this, take a plastic card from any bank instead of a spatula or just use your finger. You can also remove excess with a thread. The bottle should lie on its side.

Let's use the hairdryer again. The paste dries very quickly.

Cover the bottom of the bottle with it as well.

If necessary, brush the surface again. This is how smooth the bottle turned out in the end. Now she is ready to apply the motive.

Decoupage

The easiest way to decoupage for beginners is decoupage from a file. I chose a motif with the image of New Year's balls, cinnamon, spruce branches. The pattern does not end on a quarter of the napkin, as usual, but is located on half, as shown in the figure.

If you wrap a napkin around a bottle, it becomes clear that you will have to turn it down a little. But let's not rush.
Make the edges of the motif uneven by cutting them off. Layer the napkin.

You may need to iron the motif from the reverse side using the “silk” setting.

Place the colorful layer of the napkin on the file with the pattern down and start dripping water on top of it, from the middle to the edges. You want the entire napkin to be submerged in water. Essentially, when you straighten it, you will not touch the paper with the brush, you will touch the water, and the napkin will straighten itself.

Flatten the motif, expel the air from under it, the folds will straighten out. However, do not keep the napkin in the water for too long! The edges of the motif can be safely removed, since the paper has increased in size..
The motif on the file can be raised in this way, as shown in the figure.

Lubricate the bottle thickly with PVA glue; there is no need to dilute it in this case.

Now begins the most interesting and most difficult part of the work. Starting from the middle of the motif, lean the file against the bottle, but not all at once, but only the middle, and stroke the file with your hands up and down, and also slightly to the sides.

Next, you need to place one edge of the napkin on the glue and slowly separate it from the file. If necessary, straighten with a wide brush with water, but it is better to glue straight away evenly.

In the photo below you can clearly see that one part of the napkin is still on the file, and the other is already on the bottle.

Now overlap the rest of the napkin, adding a little glue. This whole process requires skill, attention and concentration. If necessary, carefully tear off the excess part of the image too.

Pay attention to the following photo. It shows that the last part of the napkin did not stick very smoothly, and when trying to smooth it out, the motif began to tear. At this stage, if this happens to you, it is best to exhale. Let the napkin dry naturally; a hairdryer will only do damage here.

Now glue the top of the napkin, which previously remained just in the air. If creases form, they can be removed later with sandpaper.
Select a color and complete the background using the same sponge.

While the paint is drying, prepare the artificial snow. To do this, mix white paint, PVA glue and semolina or something like this foam balls as in the photo.

Apply two coats of varnish to the bottle and let it dry. Before this, it was possible to depict patterns on the surface.
Cover the lid with foil and apply fake snow to it.

Finally, hide the bumps and seam of the napkin with a few branches of an artificial Christmas tree or tinsel. I also glued real pine cones and covered the branches artificial snow. You can attach this to a glue gun, which you can buy at the Fix Price store for no more than 100 rubles.

That's it, the beautiful one is ready!

At the request of our readers, we prepared a master class in which we examined step-by-step how to decoupage a bottle with napkins with your own hands.

The lesson is suitable for beginner craftsmen of all ages. The basis is a gift for a man, hence the corresponding design. However, you can choose a different design and decorate containers of any shape using the same principle. Try it! It's very exciting, beautiful and really simple and fast!

Preparation of the material part

To do decoupage, prepare materials and tools:

• glass half-liter bottle, the same as for nautical style and leather;
• a three-layer napkin with a thematic picture (it’s better to buy a special one);
• white acrylic water-dispersion paint;
• PVA glue;
• glossy water-soluble varnish;
• a new sponge for washing dishes;
• soft brush;
• decorative rope;
• large beads or pendants;
• scissors;
• nail polish remover;
• cotton wool;
• disposable containers for glue.

How to make decoupage from napkins on a bottle

First, soak the waste bottle in warm water for one hour to soak the label paper. Remove any paper from the glass.

As a rule, glue remains on the surface, which is difficult to wash off with water. To completely remove residue, use nail polish remover. Dry the vessel.

Cut the dish sponge into two parts.

Before decoupaging a glass bottle with a napkin, create a uniform background. This will hide possible errors when gluing the pattern. Apply white acrylic waterborne paint to the surface.

Paint do not apply with a sponge, but make frequent tangential movements, as if “smacking.” Wait until the paint is completely dry.

Select a picture. A suitable option There may be photos of cities, cars, all kinds of geographical maps, images of large and strong animals and fish. Consider the man’s character, his hobbies and your relationship with him.

If this is a loved one, then romance is acceptable; if it is a colleague or boss, then everything should be in a strict style. Carefully peel off the top layer.

Wrap a colored layer of napkin around the bottle and determine which fragment will be needed for decoupage. Gently tear it off with your fingers. You can cut it off, but then the edge will be clearly visible on the craft. It’s better to cut with a margin, and then tear off the edges.

Dilute in disposable tableware PVA glue with water in a one to one ratio. Place the fragment face down on a stationery file. Gently stretching the napkin, apply diluted PVA glue with a brush.

Attach the drawing on the file to the glass. Carefully remove the file. Use a brush with glue to correct the drawing where necessary.

While the glue dries, prepare the pendant for decoration.

Since the image of one of the cities of Cuba, which at the beginning of the last century was the center of the gambling business, was chosen, beads in the form of dice and chips.

Cover the surface of the craft with varnish.

Tie the pendant by tying several rows of rope around the neck.

Decorate the cork if you like. It also needs to be pre-coated. acrylic paint.

A master class on decoupage from napkins on a bottle for beginners was prepared especially for the online magazine “ Women's hobbies" See other decoupage tutorials at. Handicrafts are ideal for those who do not know how to draw, but want to create masterpieces.

Visit us more often, and in order not to miss new publications, subscribe to our news at in social networks. We always have a lot of interesting lessons and articles for women.

To decorate bottles and glasses for a wedding you need to use with the following diagram:

• The surface is first degreased. To do this, you need to wipe it with alcohol.
• Then special primer for decoupage is applied, which is sold in craft stores. However, acrylic paint will also work perfectly as a base. The paint is applied with the most common foam sponge, which is usually used to create makeup.

IMPORTANT: There is often a need for a second layer of acrylic varnish.

• Once the varnish is dry, You can treat the bottle with glass glue and then attach the napkins. It is recommended to use a special pistol. Do not worry about the fact that the glue is formed in the form of ampoules - they melt in the gun
• After 60 minutes the bottle should be cover with several more layers of acrylic varnish
• After another hour you can start painting bottle day
• And now can be decorated to your taste with sparkles, ribbons, flowers, lace, beads

Glasses are decorated according to the same principle as bottles. It is recommended to tie two glasses or two bottles with ribbons as a symbol of a strong relationship.

If you want something unusual, You can design one bottle in a masculine theme, and the second in a feminine theme. Also, things that depict the hobbies of the newlyweds will look quite interesting.

Decoupage bottles for a man's birthday

A good option for designing a birthday bottle for a man is design with a portrait of the birthday boy:

• Be sure to degrease the surface with alcohol, having first removed all the stickers on it

IMPORTANT: The remains of the old glue must also be removed, otherwise it will affect the quality of the decoupage.

• Print two photos for forward and reverse technique
• Pour a small amount of water into a container. Place the photo face down in water- this will help the sheet delaminate. After holding the image in water for a couple of minutes, Gently roll up excess layers with your fingers so that only one thin colored

• Meanwhile, on the bottle, in accordance with the size of the photograph, a place for it is indicated. This place is lubricated with acrylic varnish. Above The photo is pasted with the front side inward

IMPORTANT: Smooth the paper thoroughly - there should be no bubbles or wrinkles.

• After the photo has dried, you should stick a second one on it. Only this time the image will be facing the viewer. Smooth out the picture

• In a very ordinary syringe, add texture paste, which can be purchased at a craft store. Squeeze it onto outline photo. You can also do inscription

• To make the bottle look more elegant, you can use colored paste draw some patterns

Don’t think that a design for a gift for a man cannot be bright. Here are some examples of gift bottle decoupage:

Decoupage bottles for a woman's birthday

Quite interesting and unusual effect it will work if you do decoupage with fabric. You can take some unnecessary tights:

• Degrease bottle surface
• Cut off part of tights soak in the mixture, consisting of water and PVA

IMPORTANT: The proportion of glue and water should be 1 to 1.

• After soaking with solution tights are laid out on the bottle in the form of waves, tails. At the same time, do not forget to leave space for gluing the napkin
• Wait completely dry material
• Primer acrylic paint or a special composition purchased at a craft store
• All that's left is tint to your taste, decorate

Very a good option for decoupage bottles as a gift for a woman - p rikleit lace. Small chains, beads will also fit.

Decoupage as a gift for fans of French charm

Decoupage eggshells on bottles

This decoupage will add volume to the patterns on the item, making the bottle truly unique. You will need:

• Shells cleaned of dirt and films
• Wide flat brush
• Special napkin for decoupage
• Acrylic paint
• Toothpick
• The varnish that will be used for the finishing coat

Let's get started:

• Crush the shells with your fingers before applying to the bottle. into small pieces. However, adjust the sizes depending on your idea.

IMPORTANT: Some craftsmen glue large pieces of shell to the surface, and then crumble them with a blunt object, placing them with a toothpick. However, it is better for beginners not to resort to this method.

• Apply glue to the surface of the bottle. It is recommended to start from the neck. Pieces of shell are applied to the glue and leveled using a toothpick. Remember to lightly press down the material.

• Cover the entire bottle in this way, but do not touch the bottom. Top coat the entire piece with white acrylic varnish.

• Since you need to highlight the cracks, you should coat the surface of the bottle with varnish with a sponge brown tint . It is better to mix several shades in advance to get the desired one.

• Without waiting for the varnish to dry, Wipe the bottle with a damp cloth. This way the varnish will remain only in the cracks, which is what is required.
• Cut out the desired images from napkins. Separate the top layer from them

• Now selected attach the drawings to the bottle and apply glue on top

IMPORTANT: Apply the glue from the center to the edges using a wide brush.

• The final stage - applying acrylic varnish

Decoupage bottles for the New Year

For this decoupage we you will need:

• Bottle
• Acrylic white primer
• Decoupage napkin
• Acrylic paints
• Crystal paste
• Finishing varnish for fixing the coating
• Golden red glitter
• Synthetic brushes
• Fine-grit sandpaper
• Foam sponge
• A palette knife used by artists to remove excess paint or apply primer

Let's get started:

• First thing you need to clean the bottle from labels and traces of glue. To do this, it should be placed in a container with water. room temperature- this is how the labels come off. But it’s easy to get rid of glue residues using baby cosmetic oil.

IMPORTANT: Don't forget to rinse the bottle with dishwashing detergent if you used cosmetic oil.

• Then with alcohol degrease the glass surface

• Apply primer with a sponge. It is recommended to make the first layer thin and then dry it with a hairdryer - this way the primer will lie on the glass in the best possible way. The second layer should also be thoroughly dried.

• Tear off the images you want to glue from the napkin. Remove the bottom two layers, leaving only the colorful one.

IMPORTANT: It is better to tear off images rather than cut them out, because torn edges are easier to disguise with the background so that they blend into it.

• The top layer should be placed face down on the file. You need to pour a little water directly onto the napkin. Smooth out any uneven surfaces on a napkin. You can help yourself with a brush. After some time, remove excess water from the paper
• T Now attach the file to the bottle so that the wrong side of the napkin is adjacent to the bottle. Gently smooth out creases
• Pull one corner of the file to remove it. The napkin will remain on the bottle
• Smooth out the wrinkles again and Cover the bottle with glue or acrylic varnish. Let the bottle dry thoroughly

IMPORTANT: Make movements from the center to the edges.

• Small folds that probably still remain should be dealt with separately. Removing them is easy thanks to sandpaper with small grains. Rub the sandpaper along the unevenness
• It's time finishing varnish

• Now we need to work on the main background. Apply white and blue acrylic varnish with a sponge, not forgetting to remove excess from the sponge

• Mix the shades that should be used to work on the edges of the picture - You can’t do without this if you want to achieve a natural image

• The plug should also be tinted

• Take an unnecessary toothbrush and use it make splashes of white paint

• Apply again finishing varnish
• Do it with a syringe inscription

• The image should be three-dimensional. To do this, a transparent paste with glass pieces is carefully applied to the bottle - it will imitate ice. Silver acrylic paint will also help.

IMPORTANT: This is where the palette knife comes in handy. It is most convenient for them to apply such a coating.

Another great way decorate the bottle on New Year - sprinkle it with large salt crystals. The technique is simple - salt is attached to glue.

Decoupage bottles with napkins

Decoupage with napkins looks especially chic if you use craquelure varnish- it helps create the effect of antiquity. So, for such a case will be needed:

• Bottle
• Acrylic paints
• Craquelure varnish
• Napkins
• Alcohol for glass degreasing
• Flat synthetic fiber brush

Let's get started:

• So, first of all, make degreasing the surface and removing old labels
• Now coat the bottle with acrylic varnish. Try to make sure the layer is even. Best applied with a sponge

IMPORTANT: Regarding color range, then keep in mind that the base should be the color that is planned for the cracks. Therefore, if the bottle itself is white, then it is advisable to make the base black or dark brown.

• Wait for the varnish to dry. You can use a hair dryer
• Now apply on top craquelure varnish. There is no need to dry this layer
• Next, apply neat strokes close to each other. acrylic lacquer. It is important to dry this layer properly
• At this stage Let's start drawing a picture from a napkin. Peel off the top layer. Trim off all excess, while trying to avoid smooth edges, which are then difficult to make natural
• Dilute PVA in water. Apply the solution to the surface of the design attached to the bottle. Move from the center to the edges
• Varnish the surface. Work out the details if desired.

Decoupage bottles with toilet paper

So, to decoupage a bottle with the most ordinary toilet paper will come in handy:

• Bottle
• Toilet paper
• Napkins
• Acrylic paints of various shades
• Salty dough
• Various items for decoration - for example, beads

Let's get started:

• Of course, bottle degreasing- this is an essential stage of work
• Now tear the toilet paper into pieces, cover the bottle with these pieces

IMPORTANT: Apply pasting as if you were creating a background.

• Now strips should be made of paper. It is advisable to select the width within 1.5 centimeters. But the volume should be different - for this, some stripes are created in two layers
• Pour some water onto the surface. Lightly wet each strip in some places and then twist- this way the liquid will be distributed evenly, and the strip will not get completely wet

• Make toilet paper balls in the same way.. However, the idea will only benefit from use salt dough. It is recommended to outline the pattern in pencil in advance.

• Let the work dry. After that can you paint a bottle?

• Add to decor additional elements optional

Decoupage bottles with ribbons

There is enough interesting way decorate the bottle ribbons, rolled rollers. Will be needed for this decoupage only a bottle, ribbons and glue.

IMPORTANT: Regarding the number of tapes, you will have to stock up on 36 meters.

The principle of creating decoupage is simple:

• Cut the ribbon into small pieces. Roll each piece into a roll
• Glue the rolls onto the bottle. It is recommended to start work from the bottom
• After the ribbons are glued, use something like a knitting needle straighten them out a little. Try to ensure that the bottle is still visible through the decorative elements
• The neck also needs to be decorated. You can choose the simplest way by wrapping it with ribbon and attaching a flower

But there is also lots of other ways wrap ribbons around bottles beautifully and creatively:

Decoupage bottles with flowers

You can decorate the bottle not just with ribbons, but with ribbons in the shape of flowers. AND You will need the following things for this:

• Bottle
• Ribbons
• Beads
• Acrylic primer
• Acrylic paint
• Silver outline
• Glue gun

The working process is as follows:

• First a bottle degreased nail polish or alcohol
• Now primer is applied using a sponge
• The bottle is covered acrylic paint

IMPORTANT: You can apply paint with either a sponge or a brush. However, the most interesting effect is obtained if you use a sponge - the surface becomes rough.

• While the bottle dries, you can start making flowers. The easiest way is to simply thread pieces of ribbon onto a needle and thread. The thread will tighten and the outline of a flower will form. Another way is to simply fold the corners and burn the edges. The last action will ensure soldering
• Once the bottle is dry, you can stick flowers. You can decorate them with beads and thin ribbons
• Contour around the perimeter of the tapes patterns emerge

A bottle presented for some holiday is, of course, a good gift in itself. However, you will agree that it will be much more pleasant to receive a unique thing, carefully made by someone else’s hands. In this case, decoupage can help out even those who have not previously had anything to do with needlework.

Bottle strength. Master Class

Source http://nitochka09.mirtesen.ru/blog/43991281605

I filmed it myself, incl. the quality leaves much to be desired. Well, now the order of work:

1. I washed the bottle, covered it with acrylic paint for walls and ceilings, to which I added color (camel color) and PVA.

2. I cut bricks from cardboard. Double-layer corrugated cardboard and glued to PVA. The fact that the cardboard was two-layered turned out to be very inconvenient - it delaminated. It's better to take regular cardboard. And one more thing... I glued each brick separately - I was constantly in the glue for a long time. It would be better to apply glue to 1 row around the entire perimeter and then glue the entire row of bricks at once.

3. I went over all the PVA brickwork. Let it dry. Then I used acrylic paint again, but made it a little darker (added black and a little red ink).

4. Made a roof. I found a medical bandage (large woven, used), dipped it in the same paint and wrapped it around the top of the bottle and the cap with the pimp.

5. When it was dry, I covered it with dark brown paint (I also added black ink). Painted it with chpokas.

6. I marked the window frame with a black outline (there was no other outline). The glass was covered with pink acrylic stained glass paint. When it was a little dry, I touched it with a dry brush. The window becomes iridescent. I did not do reverse decoupage, as in MK. I took the bottle from a friend in the closet, where it stood for who knows how many years and I simply could not wash it. Boiling in activated soda, vinegar and daily soaking in Domestos did not help. The whitish spots did not go away - I had to hide everything with whatever I could.

7. When everything was dry, I coated it with varnish. Spray varnish for cars (there was no other). Varnished 3 times.

That's all.

And now MK, which I used, but not one to one (I simply forgot about semolina and eggshells).

Decoupage bottles in different options(photo)

Decoupage bottles in different versions (photo)

Nowadays, most needlewomen are fond of decoupage, namely, decorating various items paper applique. And, to be more precise, decorations are made from special decoupage napkins, which are sold in wide range on the shelves of specialized stores intended for handicrafts. The decoupage technique is done on many things made of wood, metal and plastic. But the most popular is decoupage on glass, or rather decoupage of bottles.
Every housewife always has empty glass containers, for example, cans for bulk products, intended to be thrown into the trash, depending on how long they have been used. Don't rush to do this yourself. You can try to redo it, but not at all the right thing, into an interesting vase, which will later decorate your interior, for example in a marine style. Especially when original ideas are much more valuable than factory decoupage on glass.










Not only used alcohol bottles can be decorated, but also other glass objects that have lost their appearance. Decoupage of a vase will be very relevant.

Bottle for Women's Day

If you don’t know how to make glass decoupage on a champagne bottle for the 8th of March holiday, then the presented master class and instructions tell you how to decorate and create decoupage bottles with your own hands.
Prepare a bottle of champagne by removing all labels from it. Then, degrease it with alcohol or window cleaner. Now, you should paint the bottle with light acrylic paint in several layers, as shown in the photo.




Select
, from which you can make an eight for the holiday of the eighth of March. Cut out the circles and make them in pairs.




Take acrylic-based paints and mix them to create a subtle shade of salad color. Thus, we will make a non-traditional bottle background. Apply this paint using a washcloth to the entire surface of the product. The bottle will turn out to be a beautiful spring shade, as shown in the photo.






Now we do the usual decoupage for beginners. Attach cut out circles from a napkin to the bottle and coat them with decoupage glue. After the glue has dried, we can consider that the master class is finished, but that’s not all. It is necessary to decorate the ornament with an acrylic outline or glitter, circling them around the picture, as shown in the photo.










In the center of the bottle, make an inscription for the eighth of March, it will be quite useful. When the green glitter dries, it will shimmer beautifully. Cover all the work done with acrylic varnish, which will add incredible shine. Now, a festive bottle of champagne is ready to decorate the table on March 8th. In the video you can see how to decoupage a vase.

Video: Decoupage glass vases

Decorate the bottle with eggshells

Technique of decoupage of bottles, finished eggshell, you can safely give it to your friends or loved ones. Because such work looks original and beautiful, acquiring a three-dimensional appearance. To work you need the following accessories:

• wine containers;
• alcohol;
• eggshell;
• napkin, decoupage glue and brush;
• priming.

Wash the bottle well under running warm water so that the labels can be easily removed with your own hands. Then, the entire surface is degreased with alcohol or washing liquid.


For primer, acrylic paint is perfect. Apply it to the bottle using a kitchen sponge. Leave the product for a short amount of time to dry, as shown in the photo.



To make the layer look more even, apply another layer of paint, as shown in the photo. Using a sponge will help get rid of streaks. This time, drying will take about 30 minutes.


Meanwhile, you need to continue the master class with eggshells and start cutting out pictures from napkins in decoupage style. Place the pictures on a stationery file and blot them with water. Using careful movements, place it on the main part of the bottle. The following manipulations follow the same course as for beginners, using glue and brushes. The workpiece is left to dry for one day.



Decoupage with eggshells begins with the production of the base material. Rinse the shell under water and dry. Coat the entire surface of the bottle with glue and use tweezers to lay out the shell like a mosaic. The eggshell ornament will be made on two sides, namely the top and bottom of the bottle. After a break of 20 minutes, apply background paint. This decoupage takes on a voluminous appearance.



The last stage is to paint the resulting areas with eggshells more dark shade and open with varnish. Now, decoupage on glass is completely done by hand. You can watch the video on how to make reverse decoupage on glass in an interesting style.

Video: Making reverse decoupage of a bottle

Wedding champagne bottle

Wedding attributes are always given Special attention. This even applies wedding glasses and champagne. You can create decoupage of a bottle of champagne for a wedding yourself. An example presented by a master class with step by step photos, great for beginners using a postcard or picture. Prepare the following materials:

• champagne;
• pictures or postcards;
• acrylic based varnish;
• acrylic paint;
• washcloth.

Remove all labels from the glass bottle by soaking it in water. Then, degrease the surface with alcohol. Paint the product with primer. The master class involves the use of postcards. Cover it with acrylic varnish and dry. Now, remove the top tier of paper and cut out a suitable motif.









The bottle is smeared with glue, and the selected pictures are applied on top. Use gentle movements to smooth out the pattern to avoid any bubbles or creases.
It is necessary to dilute the paint that, in your opinion, matches the color of the bottle. Use a brush to draw a darker outline. Dip a foam pad into a light tone of paint and create a haze, smoothing the edges of the image.




Now all that remains is to paint the veins in silver using an old brush and draw in the details. The final touch is to varnish the entire surface of the champagne. Decoupage of a bottle of champagne for a wedding, successfully done. This craft will perfectly decorate wedding tables. Watch the video for a master class on how to decoupage bottles with fabric.

Video: Bottle decor with fabric

Bottle decoration with tights

In order to implement such an interesting and voluminous master class, and create glass decoupage with tights, you will need the following list of materials: a bottle, craquelure, alcohol, tights, PVA glue, acrylic varnish and napkins, as well as
, a washcloth and acrylic-based paint.
Take the bottle and degrease it using alcohol. Take nylon tights and dip them completely into the glue solution. Then, stretch them over the item to be decorated and form folds. The napkins are also soaked in glue; you need to make flowers out of them. Drying time is one or two days.


After this, the product is coated with black acrylic paint. Let it dry for a while. Select the picture motif you like and apply it to the bottle, covering it with several layers of glue. Remember to take breaks between layers.

Wait until it dries and boldly apply golden acrylic paint with a washcloth, painting over the black color. Next, the craquelure is applied with a synthetic brush, and after four hours, the second layer is applied. When another two hours pass, you will see how the craquelure turns into cracks. Using bitumen patina, we create the effect of aging of the craft by rubbing over the cracks. The final touch that appears after using craquelure is the application of acrylic varnish to consolidate the creative work.

Decoupage from toilet paper

Decoupage on glass with toilet paper begins with preparing the fittings:

• bottle or jar for bulk products;
• toilet paper;
• acrylic based paints;
• napkins;
• glossy varnish;
• scissors;
• brush, PVA glue and washcloth.

Prepare a bottle, or if you want, you can use several cans, after wiping it with alcohol. Cut out suitable miniatures from a napkin. Small squares are cut out of toilet paper. To apply glue to paper, you will need a thin brush. Now, apply the cut-outs evenly to the bottle as shown in the photo. We leave it to dry.








Toilet paper is very thin, so we paint it with white acrylic paint. Large pictures are glued in the central part of the bottle, and small ones on the cap.




After everything is thoroughly dry, cover the entire light part of the bottle with acrylic paint. of blue color. The next stage is painting it golden, applying it to a washcloth.




Twist thin ropes from a napkin and paint them gold. When they are dry, you need to make an ornament out of them and glue them to the bottle. After this, the entire surface is varnished. Decoupage of a glass bottle, safely made with your own hands, using toilet paper.

Craquelure in bottle decoupage

The next master class for beginners will teach you how to use craquelure when working on crafts. We wash all the tags from the bottle and degrease it with alcohol or nail polish remover. We prime the container with white.





Now, we will need toilet paper, which we will use to decorate the bottle. Soak the paper in glue and apply it to the bottle, making small folds. This procedure must be done very quickly. After this, the craft will take on a three-dimensional appearance. Tear out a suitable motif from the decoupage card and glue it with PVA glue. The photo shows the result. Leave the bottle to dry for about 6 hours.






Take acrylic paint of the same color as shown in the photo. Apply it to the surface, not all over, but in parts to make the craquelure more impressive. Apply the craquelure and wait for about two hours. Then, cover the product with light acrylic paint. Paint the areas where the toilet paper is also white.






After drying, the bottle is coated with finishing varnish, as shown in the photo. This is where the extensive master class ends. If you want to learn how to do reverse decoupage on glass or decoupage bottles with napkins, we suggest watching a video that shows how to work on a bottle in a nautical style.


As you can see, the instructions and master class on decoupage of bottles and cans for bulk products are simple and interesting. It will be clear, even for beginners. A variety of master classes and even voluminous ones will give your imagination flight.