Stockinette stitch: when knitting in the round, only knit stitches. loops.

Garter stitch: when knitting in the round, alternate 1 row of faces. p. and 1 row purl. P.

Knitting density: 19 sts x 25 rows = 10 x 10 cm.

Attention! The pullover is knitted from top to bottom in one piece.

Description of knitting a melange raglan pullover

Cast on 108 stitches and knit in the round. stitch 4 rows. Then start making increases to form raglan bevels, distributing the loops as follows: 36 sts of back, yarn over, 1 st of raglan line, yarn over, 16 sts of sleeves, yarn over, 1 st of raglan line, yarn over, 32 sts of front, yarn over , 1 p. raglan line, yarn over, 16 p. sleeves, yarn over, 1 p. raglan line, yarn over. Continue knitting in this manner, yarn overs before and after the raglan lines every other round.

At a raglan height of 25 cm, transfer the sleeve loops to additional knitting needles and continue knitting the front and back stitches in a circle. satin stitch At a height of 48 cm, knit 4 rows in garter stitch and cast off all stitches. Then transfer the sleeve loops to working knitting needles and knit in the round. satin stitch, decreasing for sleeve bevels in every 4th row by 1 p.s. inside. At a height of 37 cm, knit 4 rows in garter stitch and cast off all stitches.

A technique such as raglan knitting on top is widely used by hand knitters. Models with raglan sleeves do not have seams, this makes knitted item lighter and more convenient.

Pros and cons of knitting raglan on top

Knitting raglan on top with knitting needles - easy, beautiful, convenient, practical

Advantages of the raglan top knitting technique:

• no seams;
• fast product execution;
• the ability to change the size of the finished product;
• using one thread when knitting;
• a large selection of patterns that can be knitted from the neckline without seams;
• use of raglan lines as a decorative element of the product.

Disadvantages of the raglan top knitting technique:

• An accurate calculation for a specific product size is required.

Let's get started

It is better to start mastering the technique of knitting a product from the neck without a complex pattern.

When starting work, you should decide on the model. The presence of a fastener, neckline, sleeve length, size - everything needs to be taken into account.

What do we need?

1. Sketch of the desired model.
2. Circular knitting needles - you need to choose, taking into account the thickness of the thread.
3. Yarn - selected depending on the model and size.
4. Threads for marking.
5. Stocking needles for working on a seamless sleeve.

Calculating the length of the neck

For a more accurate understanding of how to knit raglan on top with knitting needles, you need to calculate the length of the neck. Initially, the neck circumference is measured. For example, the neck circumference is 34 cm, then find out how many loops need to be cast on for this length.

Calculating the loop test

First you need to determine the density of loops per 1 cm of fabric.

Calculation of the loop test involves the following algorithm:

1. For the sample, a fabric measuring 20 rows and 30 loops wide is knitted. For the most accurate calculation when knitting a sample, it is necessary to use the knitting that will be used to make the main product.
2. The finished sample should be washed and steamed, which will allow for a more accurate calculation.
3. Calculate 1cm stitches using a ruler.
4. The resulting loop result must be multiplied by the length of the neck circumference.

For example, you can consider the option when the density is 2 loops. The neck circumference is 34 cm. Based on calculations, the length of the neck should be 34x2 = 68 loops.

We calculate neck loops by segments

From this amount, you need to subtract 8 loops for the design of raglan lines, divide the rest by 3. The result is 20 loops for each segment.

Taking into account the height of the front and back neck, you should calculate the number of loops of these parts. Masters recommend making this calculation as a percentage, namely leaving 45% of the loops for the front; 35% is for the back, the remaining 10% is for the sleeves.

Now simple mathematical calculations will help you count the loops by segment.

60 loops - 100%, making up the proportion, you get:

• before 45% - 27 loops;
• back 35% - 21 loops;
• sleeves 10% - 6 loops per piece.

IN in this case For each raglan line, 2 loops are used. Depending on the pattern, this number may vary, in any case it must be a multiple of 4.

Another important point in the calculation is the diagram. The detailed description looks like this.

A circle “neck of the product” is drawn in the center of the sheet, which consists of 68 loops. 4 rays are drawn from the circle - “raglan lines”, between the lines - segments of the product. The upper part is the back, the lower part is the front, the sides are the sleeves.

To knit a sprout correctly, it is necessary to divide the loops of each segment, except the back, into parts. The sleeves, counting from the back to the front, will be divided as follows: 3 loops, 2 loops, 1 loop for each sleeve.

The front loops are separated starting from the center. The diagram will look like this: 2,3,3,5,3,3,2, where 5 loops are the center of the front neck.

The essence of technology

The essence of the technique is the step-by-step knitting of all elements.

Work begins from the neck. To do this, you need to cast on the knitting needles the calculated number of loops and connect them in a circular knitting pattern.

Since the height of the front and back neck is different, it is necessary to knit a sprout. Therefore, partial knitting of the back is performed.

The part of the back and sleeves called the sprout.

To do this, turn the work with its back towards you. Now you need to determine the beginning of the sprout row. Based on the diagram, the 3rd loop of the sleeve will be considered the beginning of the row, when viewed from the back.

This is where you should start:

1. The product is unfolded, the first loop is knitted with a crossed yarn over, the rest - according to the pattern. All the back loops and the first three loops of the second sleeve are knitted.
2. Now you should turn the product and knit the first loop from the broach, then 3 loops of the sleeve in the usual way. Having reached the raglan line, an addition is performed.
3. The last stitch of the sprout should be knitted together with the next one.
4. Having turned the work to the wrong side, continue knitting according to the pattern.

Knit this way until the neckline is formed.

When knitting on top, you can choose any convenient way design of the raglan line. Depending on how the pattern will look on the finished product, the master chooses how to make the lines.

There are two main ways:

1. The most common and easiest way to design a raglan is to make 2 knit stitches without holes. Regardless of how the main knitting is performed, the raglan lines are knitted with knit stitches, according to the following pattern: before and after the line, an increase is made from the broach, 2 loops of the line are knitted with knit stitches.
2. No less easy way- 1 purl loop in the center of the raglan line. This design looks good on the front surface. It is performed as follows: before the raglan line, an increase is made from the broach, then 1 purl loop and an increase again. So the fragment is knitted to the end of the raglan.

We design the gate

The design of the collar from the neck can be done different ways. In the first case, the collar is shaped at the beginning of knitting, and then the entire product. In another case, the collar is knitted last.

The first method is used when knitting a product with a low elastic collar.

The technique is as follows:

1. 1 p.p., 1 p. removed with a double crochet in front of the canvas;
2. 1 l.p., removed with a crochet over the fabric, 1 p.

Knitting continues until the required collar size. The second method is more convenient when decorating an original gate. The collar is knitted from neck loops, which are knitted onto knitting needles, then continue with the main knitting.

Some models are made with separate knitting for the collar, then it is sewn on after finishing the work.

Shutdown

Finally, the elastic band is formed and the loops are closed. A placket with buttons and a collar are decorated.

Raglan top knitting for women (master classes)

Raglan on top with knitting needles is used when knitting various female models. It will help you understand how to knit a stylish item detailed description scheme.

Raglan neckline with button placket and stand-up collar

When starting work, it is necessary to perform correct calculations. Having decided on the number of neck loops, calculate the strap loops.

Women's raglan

As an example, a neck of 48 loops is given. For the bar you should cast on 8 more loops. Then 16 loops will go to the front, and the rest will be divided into the back and sleeves, respectively.

In the first row, the 1st edge is knitted, in the remaining rows it is removed.

Knitting pattern:

• Row 1 – first and last 8 stitches – placket: p1. removed, thread before work, 1 l.p. in the usual way, alternating, knit 8 loops, the rest are knitted in stocking stitch;
• 2nd row - placket according to the pattern (the purl loops are removed with the thread before the product), the remaining loops are knitted with a 1x1 elastic band, knitting the front one from the previous row, and the purl one in the usual way;
• 3rd row - repeats 1st row.

To avoid getting confused with the pattern, knitting professionals advise marking each strip with markers.

After knitting the collar, they begin to distribute the loops to perform the raglan.

Here it is also worth marking the raglan lines with markers.

Scheme:

1. The first row is knitted according to the main pattern. The strips are knitted unchanged until the end of the product.
2. Second row, all stitches are knitted, raglan - purl. P.
3. Starting from the third row, the sprout is knitted, then the knitting of the product continues, making the necessary increases in the lines.

Pullover in nautical style with raglan

Product in nautical style can be knitted using a combination of white and blue yarn. To work, you need to prepare 450g of white yarn and 150 of blue, circular and stocking needles.

Stages of work:

1. Cast on 77 stitches of white yarn on circular knitting needles.
2. First row - purl. loops.
3. The loops are distributed according to the scheme for determining raglan lines.
4. Increments are made only in the front rows before knitting the sprout, then the work is done in a circle of 15 rows.
5. The next 4 circles are knitted with blue yarn.
6. Changing the yarn every 4 circles, knit to the waist.
7. Next, the fabric is knitted with white yarn, the elastic of the pullover is made in blue.
8. The sleeve is knitted on double needles with white yarn up to the elastic band.
9. The elastic is done with blue thread.

Cardigan with openwork diamonds

This model is made according to the pattern of knitting a sweater with a placket. But the main difference from knitting a sweater is the length of the product. The cardigan can be long, fitted or loose.

The openwork diamond pattern is knitted according to the following pattern:

For example, a sample of 17 loops + 2 edge loops is used, the pattern repeat is 12 rows. All even rows are worked with purl stitches, and the pattern is formed in odd knit rows.

You can choose the size of the diamond according to your choice. By choosing small diamonds, the product will turn out more openwork.

The basic principle of knitting such a pattern involves yarning over from yourself, and knitting the next loops along with changing the slope, so that you end up with a clear diamond shape in the pattern.

Having mastered this pattern, you can easily use it in the main knitting of a cardigan with raglan sleeves.

Raglan top knitting for men

Men's clothing knitted using the raglan technique on top will appeal to both young and older men.

Master class on knitting a men's raglan sweater

Having carried out a preliminary calculation of the loop test, the number of loops for the neck was determined to be 120. Sweater for size 54.

Knitting the neckline and sprout is done according to the classic pattern, then the loops are distributed and the raglan lines are marked. The entire product is knitted in stockinette stitch.

The sleeve is knitted on double needles and the corresponding increases are made. The stand-up collar is made with 2x2 ribbing, the same technique is used to make the ribbing of the sleeves and bottom of the sweater.

Features of knitting children's raglan

Seamless clothing is especially good for children. Things are soft and comfortable. And the easiest way to knit such a thing is the raglan technique on top. Using the technique of knitting raglan on top with knitting needles, you can get such children's things as sweaters and vests.

For girl

Raglan is especially often used when knitting dresses for girls. A tunic knitted in this way will look good on a girl.

The technique for knitting children's raglan differs in size, otherwise the techniques follow the classical pattern. Calculation of the loop test, distribution of loops into segments, circular knitting with expansion in the area of ​​raglan lines.

Things for girls can be decorated with laces or embroidery, pompoms or tassels. It all depends on the knitter’s imagination.

For boy

Models for boys can be very diverse: pullovers, jumpers, sweaters, vests, sweaters. Having calculated in detail required amount yarn, work on the selected model according to the classic raglan knitting pattern.

When knitting an item, it should be periodically tried on the child in order to correct shortcomings in a timely manner. For a more colorful design, you can use a combination of yarn of different colors or decorate ready product embroidery

Step-by-step instructions for knitting a children's pullover using the raglan technique

After calculating the loop test and determining the required number of neck loops, the loops are cast on knitting needles.

Knitting is done in stockinette stitch from the neckline, without a collar.

Execution order:

1. 9 knit rows: 1 chain stitch, 1 knit stitch, yo, 5 knit stitches, yo, 1 purl (raglan line), yo, 15 knit stitches (back), yo, 1 purl, yo, 1 knit stitch, 1 chain stitch.
2. Purl rows are knitted according to the pattern.
3. In the 11th row, pick up 1 air loop on each side of the shelf and close the work in circular knitting.
4. Knitting continues until the required number of sleeve loops is cast.
5. The sleeves are removed using stocking needles.
6. Continue knitting in the round without any additions until the required length of the product.
7. The last 6 rows are knitted with a 2x2 elastic band and the loops are closed.
8. Knitting the sleeves is done on double needles, decreasing stitches in every 6th row to the required length.
9. The sleeve ends with a 2x2 elastic band.
10. To decorate the collar, pick up the first stitches of the neckline on circular knitting needles and knit 4 rows with a 2x2 rib.

This pullover is very comfortable. Can be worn by both boys and girls. By decorating with embroidery or other decorative elements, you can create an accent for a girl or boy.

Design of raglan lines: methods

There are different ways to design raglan lines. Depending on the taste of the author or the model of the product, the lines use classic 2 front loops without holes, volumetric pattern from braids or openwork designs.

Pattern “Braid of 6 loops”

Knitting is done in stockinette stitch, pattern repeat - 6 rows.

The scheme is as follows:

• front row - 1 yarn over, 6 knit yarn overs, 1 yarn over;
• purl row - according to the drawing, the yarn over is knitted purlwise with a loop crossing.

Knit 6 rows like this, cross in the 7th row:

• yarn over, remove three loops of the braid onto an auxiliary needle;
• knit the next three;
• return the first stitches of the braid to the working needle and knit them.

Pattern "Made from holes"

The openwork line of raglan looks great on products made from fine yarn. The number of loops in the line can be any. The easiest way to decorate the openwork lines of raglan is by making increases with a regular yarn over.

Knitting stages:

• On the front side in front of the raglan pattern, a regular yarn over is made, 2 front loops of the raglan line, yarn over;
• On the wrong side, all loops are purl, including the yarn over of the previous row.

Another very beautiful way– “Herringbone” drawing. Pattern repeat 10 rows. All additions are in the front rows, purl rows - according to the pattern.

Execution steps:

• 1st row – yarn over, knit, yarn over;
• 3rd row – yarn over, knit 3, yarn over;
• 5th row – yarn over, knit 5, yarn over;
• 7th row – yarn over, knit 7, yarn over;
• 9th row – yarn over, knit 9, yarn over.

In every 11th row the pattern is repeated. The result is a pattern of holes that resembles a herringbone. This raglan line looks great on items made from fine yarn knitted on top of both adult and children's models.

The master's imagination will tell him which choice is most suitable option line design. Products with raglan sleeves are an easy and convenient way to make knitted items with your own hands.

How to knit raglan on top using knitting needles, calculation of loops:

How to knit a raglan top with a placket and a stand-up collar:

How to tie a sprout for raglan on top:

Melange pullover

Raglan pullover with a wide neckline is knitted from melange yarn with a silvery sheen. Motif from openwork patterns will not let you get bored while working.

Sizes: 36/38 (40/42) 44/46.

To knit a pullover you will need: 300 (400) 400 g of blue-beige melange Sari Ribbon yarn (90% polyamide, 10% metallized fiber, 120 m/100 g); straight knitting needles No. 8 and No. 9; circular needles No. 7.

Facial surface: faces. R. – persons p., out. R. - purl p. Knit faces in circular rows. P.

Pattern of elongated loops: the number of loops is a multiple of 3 + 2 chrome. Each row begins and ends with 1 chrome.

1st r.: persons. p. 2nd row: * 2 yarn overs, knit 1, repeat from *.

3rd row: * remove 3 stitches as knits, while lowering the yarn overs of the previous row and pulling out the loops, transfer these 3 stitches back to left knitting needle and knit the faces together. cross, but do not remove the loops from the knitting needle, then make 1 yarn over and knit the loops again together. cross, then remove the loops from the knitting needle, repeat from *.

4th row: purl. p. Repeat from 1st to 4th p.

Pattern of holes: the number of loops is a multiple of 3 + 1 + 2 chrome. Each row begins and ends with 1 chrome.

1st row: * P1, 1 yarn over, 1 pull through (= slip 1 p. as knit, k1 and pull it through the removed loop), repeat from *, finish 1 p.

2nd and 4th rows: knit loops according to the pattern, knit yarn overs.

3rd r.: * 1 p.. knit 2 sts together.. 1 yarn over, repeat from *, finish 1 p.

Repeat from 1st to 4th row.

Sequence of alternating patterns A: 8 p. pattern of elongated loops, 16 r. persons iron. 26 (30) 34 r. pattern of holes.

Sequence of alternating patterns B: 4 p. pattern of elongated loops, 10 rub. persons iron. 26 (30) 34 r. pattern of holes.

Knitting density. Pattern of elongated loops: 13 p. and 11.5 r. = 10 x 10 cm; persons stitch: 13 p. and 20 r. = 10 x 10 cm; pattern of holes: 12.5 p. and 18.5 r. = 10 x 10 cm.

Melange raglan pullover knitted description

Back: on knitting needles No. 8, cast on 59 (65) 71 sts and knit for the strap 1 cm = 2 r. persons satin stitch

Then switch to needles No. 9 and knit in sequence A, while in the 1st row. pattern of holes, evenly decrease 2 p. = 57 (63) 69 p.

After 6.5 cm = 12 r. from the last change of pattern, close 1 p. for raglan bevels on both sides and in every 2nd p. 6 (8) 10 x 1 p.

After 14 cm = 26 r. (16 cm = 30 rub.) 18 cm = 34 rub. from the last change of pattern, set aside the remaining 43 (45) 47 stitches.

Before: knit in the same way.

Sleeves: on knitting needles No. 8, cast on 41 (47) 53 sts and knit for a placket of 1 cm = 2 r. persons satin stitch Then switch to needles No. 9 and knit in sequence B. in the 1st r. pattern of holes, evenly decrease 2 p. = 39 (45) 51 p.

After 6.5 cm = 12 r. From the last change of pattern, make raglan bevels on both sides, as on the back.

After 14 cm = 26 r. (16 cm = 30 rub.) 18 cm = 34 rub. from the last change of pattern, set aside the remaining 25 (27) 29 stitches.

Assembly: sew raglan seams. Transfer the postponed stitches of the back, left sleeve, front, right sleeve to circular knitting needles and knit on all 136 (144) 152 sts. I smooth the neckline.

At a bar height of 4 cm, knit 1 circular r. purl and loops to close the faces. Execute side seams and sleeve seams.

Do you need a sweater in winter? Weird question. And not a thin jumper with a golf collar, but a full-fledged sweater - thick, long, shaggy, with a high prickly collar, woolen and rough.

In the summer, such a sweater makes you laugh in a huge pile, takes up extra space, tickles disgustingly... And when winter comes, where is my sweater? A?

Introductory notes when creating this sweater:

There has been a mixture of wool lying around the house for a long time, bought no one knows when and no one knows why. And this “why” was clearly implied, otherwise how would there be 5 skeins of black and 5 skeins of white melange yarn on the mezzanine? I had something in mind... But I don’t remember what.

I wanted a pattern with spots, but it turned out to be stripes... Stripes!

“As fate would have it, going outside this winter is expected. I will stand there, walk, run, mince, stomp, stroll, parade, dash, pace and parade.

The main idea when creating a sweater is a high collar that fits tightly to the neck. Everything else is just an appendage to the collar. Shouldn't the collar be attached to something? (Chinese labels haunt me - it’s hard to laugh out loud after them. I had to see this one - “Chunky High Neck Sweater”).

If it's a sweater, then it's a long one! Whether you are a boy or a girl, your grandmother’s threats have been ingrained in you since childhood. "Get cold!" or “You’ll freeze the whole farm!”. I remember. The intended sweater will be below the butt and above the knee, that is, to put it elegantly, to the middle of the thigh. Almost a dress.

The yarn is melange, and the intricate weave arans will not be visible. The main pattern is a combination of facial and purl loops+ simple braids and braids.

The type and color of the yarn leads to the idea of ​​“rough knitting”. That is, the result should not be elegant women’s clothing, but utilitarian useful thing. Thing!!! FUR COAT!!!

The thread is quite thick, and the knitting needles, on the contrary, are thin (No. 2.5), so that the knitting then felts and turns into a felt boot. If it’s a sweater, it’s one so that you don’t need to put another blouse or another sweater under it...

And one more thing: there is a favorite Soviet film, “The Eldest Son,” which has been reviewed a hundred, or even two hundred times. And Busygin’s sweater has already become a symbol, a value, a memory, an example of style, evidence of a way of life, a reason to “remember” and “feel.” Natasha's girl also had a hand-knitted sweater, only red-brown. Busyginsky's sweater, if you believe your eyes, was knitted with stockinette stitch, and Natasha's - with an elastic band. Here is the super idea - following the style of Soviet needlework.

Busygin (N. Karachentsov), Natasha (S. Kryuchkova),

Silva (M. Boyarsky), Vasenka (V. Izotov).

Technological techniques that were used when knitting a black and white sweater.

I. The question has long been tormented by the question: Are there people in nature who literally repeat knitting instructions from books and magazines, and just take it and knit it as written: “Take wool “Srytefgckhgf” from the “Rrtdfc” series, knitting needles No. 3.5; cast on 72 loops; in every second row, add 4 loops; after 24 rows, transfer knitting to knitting needles No. 3; divide the row into segments of 24, 36 and 12 loops..."?

It’s not hard to guess that most knitters knit improvise. To do this you just need:
1) knitting skills (knit, purl + individual set knowledge and skills),
2) pattern diagrams and
3) an approximate pattern, which can be replaced by periodic fitting.

The interesting thing about knitting is that you have to adjust the item to your size, come up with and think through technological tricks so that it is both beautiful and not boring. What a pleasure it is to count stitches! And everyone at home knows that the howl “lost the loop!” equal in strength to the suffering of “I broke my nail!”, and you have to run and console...

What's here? Nothing special! But perhaps some knitting enthusiasts are thinking about the same elements of a sweater or jumper. If it saves someone an hour or half an hour, that’s wonderful. But the main thing is different: it is important for knitters to look at the sample WHAT IT LOOKS LIKE. That’s why I’m showing off my sweater, which is nothing special.

I wanted to provide a full description, but the thread is black and nothing is visible in the photo. Alas. Therefore, below are just some technological steps and tricks.

II. When knitting raglan sleeves, you will end up with something like this. One detail: front + back + sleeves + collar (if intended).

Disadvantages: it is difficult to tinker with a huge “pile” of knitting, shift it all the time, and adapt.

Of course, you need circular knitting needles on a fishing line. The upper part is knitted in one piece on circular knitting needles, and then you need to divide the knitting into 4 parts and knit on those knitting needles that are comfortable. The best option: have 4 sets of knitting needles of the same number (back, front, 2 sleeves). But you can turn it out: the postponed parts can be transferred to thick contrasting threads or knitting needles under a different number.
III. How to determine the required number of loops for a collar?
Using the "selection" or "model" method.
1) Knit the sample with the same viscous stitch as intended. Count the loops (A) and measure the sample in centimeters (b).
2) Measure your neck; at the same time, think about what kind of collar you want - a tight-fitting or wide “collar”; finally decide what collar circumference will suit you (c).
3) And then apply the formula from the program primary school(I remember it as a “cross” formula) in search X, that is, the number of loops to cast on:

a loops -b centimeters
x loops - c centimeters

a-b
x - c

x = (a Xc) : b

IV. How to divide knitting into segments “front”, “back”, “sleeves” when knitting in the round “raglan”? Eat Golden Rule: the number of loops must be divided by 3 (number A), and the resulting number A divided by 2 (number B). A is the front and back. B is the sleeve. This is the first - rough - formula. The basis.

And then you should throw the loops back and forth, fearing nothing and following your plan.

1) Subtract a few stitches from the back and add to the front piece. There’s always a little more in front! Especially the ladies.

2) Select the number of loops for the raglan line itself. This line is not a seam, but it represents a seam. It can be 1 loop, or 2, or 3, or even 13, like mine. These loops need to be taken away from the front, back and sleeves.

In general, you need to spend time on these calculations, redrawing the circle diagram several times and throwing loops back and forth. (There are many master classes on the topic of raglan sleeves on the Internet, and they are clear and detailed).

An option for dividing circular knitting into segments.
There are 124 loops in total. A is 41 loops, B is 20; and then throw the loops, following the idea.

“Braid” is a raglan line, in this case wide - 13 loops.

Red arrows mark points for further addition of loops.
Peculiarities:
1) “braid” (13 loops), that is, a raglan line, you get more sleeves (11 loops)! It's OK!
2) the front segment is 12 stitches larger than the back! that's okay too! I needed the drawing to “fit in.”

V. Collar with button fastening.

If you are planning a collar with a fastener, then when casting on loops (at the very beginning), you should add the number of loops to the width of this very fastener: 4, 5, 6... As you want. I added 4 loops. But I didn’t change the pattern: the same 2X2 elastic band. You can knit a bar.

If you are planning a double collar - with a hem - then you need to think and understand the principle.

Where do you want to make the fastener? Which side should you make the loops on - right or left? Try on the collar and decide. It’s difficult to write about this, but deciding based on trying it on couldn’t be easier.

Where do I want the clasp - on the right or on the left? I tried on a knitted strip around my neck. I have decided. It’s better to make the loops from the front side. Pin a colored pin there - a mark, so as not to confuse anything.

The result should be a picture like this.

The fittings on the two parts of the collar should be on the front side.

If the collar is knitted from above (that is, for the raglan model), then loops should be made on the first half of the collar on the wrong side. On the opposite!

And on the second half of the collar (that is, the one that will be adjacent to the neck), loops need to be made where you want.

At the bottom of the collar the fastening is as planned: loops in the front, buttons in the back.

And, accordingly, on the upper part of the collar (the one that is knitted first),

the loops are made on the opposite side.

The distance between the loops is optional. The size of the loop is for a button. (Again, there are master classes on tying loops. Different ones).

Overlapping (overlapping, closing in a circle) at the very end, that is, before moving on to knitting the parts of the front, back and sleeves, is done simply: arrange the knitting needles parallel so that the knitting needle with loops is on the outside, and with buttons on the inside; and mix the loops one by one: 1 loop from one knitting needle, 2 loops from the other, etc. Everything will work out by itself: the bar with loops will be on the outside, as it should.

VI. In what order and with what frequency should I add stitches when knitting raglan sleeves?

And again it exists golden rule: in every 2nd row you need to add 8 loops, that is, in each place of addition - 1 loop.

Where are these places? In the diagram above, these places are marked with red arrows. To put it simply, it’s like this: on both sides of the raglan line. When knitting, you can use marks: thread marks, colored pins, special separators, etc.

1st row - add 24 loops, that is, in the place of addition, knit 3 from 1 loop (loop, yarn over, loop).

Row 5 - add 24 stitches again.

On the front part, the placket is highlighted simply: with garter knitting (all loops on both sides are knit). Garter stitch is good because it does not curl into a tube and holds the edge well.

The thing is made of black yarn - hard to see.

But on the right you can see the bar connected like this:

1 knit stitch (plank border), 4 loops - garter stitch.

And on the back part the bar should be knitted differently: add 5 loops (or 4, 6, 7...).

The part should protrude, as happens on patterns for vents, codpieces, etc.

And after the side seam connects the front and back, you need to secure this bar with a few horizontal stitches on top. All. The cut is ready.

VIII. When knitting a model with a raglan sleeve, a headache always arises: how to finish the work, how to knit an elastic band? Just close the loops? It won't be pretty. And a wave will go along the edge!

Everyone is looking for their own ways to get around this misunderstanding. Many people knit the elastic separately and then attach it to the piece using the knitting method. (Oh! There are many master classes! And there are many different tricks! How many masters - so many ways).

1) transition to thinner knitting needles (No. 1.5);

2) after several rows we make a “fold” in the traditional way: from 3 loops - one, and in the next row or every other row we knit three from the 1st loop. That is, we return to the original number of loops. Where “holes” appear from decreasing and adding, there will be a nice neat fold;

3) knit the same number of rows as before the fold;

4) and then simply fold it over and sew it with a hidden seam, without pulling the thread. All.

Option for forming a fold, following the “elastic band” pattern:
1st row: purl 2 loops, knit 3 together, etc.;
2nd row: all loops according to the pattern;
3rd row: purl 2 loops, knit 3 from 1 loop, etc.

What's the result? Blind seam can not see. Once.

It doesn't fit anywhere. The cutting angle is pure perpendicular. Two.