This headgear model is very diverse. Different age categories can choose their own version. But it is especially suitable for children. In this article, we will show you several variations of how to knit a hat-cap with knitting needles with your own hands.

For the little ones

The foundation

For this model for newborns, we need: high-quality yarn (choose the color at your discretion) and knitting needles.

Cast on 45 sts and knit 2, then 41 sts openwork pattern(at the end of this lesson we will show you an openwork pattern) and then knit 2 loops again. Using this pattern, knit up to 27 rows like this. When you're done with the main part, start making subtractions. From the beginning and end, knit two loops together. With each row, you should have a corner of the cap.

Collar

Let's start with the collar of the hat. To do this, type a new row along the edge of the cap and then attach 6 more loops. Now do the same with the second side of the cap and knit a row with the front ones, the row with the purl ones about 6-7 cm.At the same time, do not forget to add new loops with each row. Then knit the collar with an openwork pattern. Continue until the desired collar length suits you.

Openwork pattern

The main advantage of this pattern is its simplicity, with all this it will not lose its attractiveness. The component part of the pattern consists of 27 loops (do not forget 1 loop at the end of the typesetting row + 2 edging).

1 row - knit 1 knit stitch, make a yarn over, repeat this 4 times and knit 2 more knit stitches. Make 2 left bending loops (repeat 4 times), 2 right bending loops (repeat 4 times), knit 2. Crochet, front (repeat 4 times). 2 row - the entire front. 3 row - knit 1 purl, yarn over, repeat 4 times and knit 2 purl. Make 2 left bend stitches (repeat 4 times), 2 right bend stitches (repeat 4 times), purl 2. Crochet, purl (repeat 4 times). 4 row - purl.

The pattern is ready!

Santa Claus hat

This hat is relevant every year, in addition, in this lesson we will tell you in detail how to connect the option for women with the example in the photo.

As you guessed, we need two colors of yarn - white and red. Cast on six stitches on double-sided needles with red thread. 1 row - knit with front loops. 2nd row - pull 1 front loop out of the broach. At this stage, we have 12 loops (12 loops). 3-5 row - knit with front loops. 6 row - pull 2 ​​loops out of the broach (18 loops). 7-11 row - knit with front loops. 12 row - pull 3 front loops out of the broach (24 loops).

Continue to increase until the number of loops reaches 78. Now knit the hat to an approximate height of 36 cm. Break off the thread and join the white yarn. Knit 1 row with the front, the next with the purl. Thus, knit an elastic band of 13 cm. Fasten and break the thread, this is the product.

Second option

Cast on 50 loops and knit 4 rows with elastic 2 by 2. 5 row - knit 3 purl loops, 2 loops together with purl and knit this pattern to the end of the row.

Next, knit with the front stitch to an approximate height of 25 cm and finish with the front row. Next, knit the crown: 1 front loop (2 loops together, 4 front loops), so knit 7 times, you should have 36 loops. Knit the next row straight. Next row - 1 front loop (2 loops together, 3 front loops), knit 7 times, you will have 29 loops. Work a row straight. The next row - 1 front loop (2 loops together with the front, 2 front) and that 7 times, 22 loops remain. Work in a straight row again. Then 1 front loop (2 loops together front, 1 front) and so 7 times, in the remainder of 15 loops. Another row is straight. Then 1 front loop (2 loops together with the front one), repeat 7 times and there are 8 loops left. Work 2 rows straight. Pull off the yarn and pull it through the remaining loops, tighten and tie.

Yellow shades

We suggest that you knit a hat with this particular color of yarn. With its sunny color, it will give you a wonderful and cheerful mood even on cloudy and rainy days.

The main pattern of this hat is garter stitch... This technique means that the loops in the front and back rows must be knitted with the front ones.

Cast on 60 stitches and knit 12 cm in garter stitch. Now gradually decrease 10 stitches (you should have 50 stitches left). Knit another 10 cm. After you have knitted 20 cm from the very beginning of the hat, decrease by 10 loops. In total, you have 40 loops left. Our reductions will not end there. We will make a decrease in 2 loops for 20 cm every 2 cm.Try on a hat, and if it is right for you, then stop at 20 loops, if it is still too small, then decrease to 16 (this is about 3-4 cm). Sew the cap on side seam and steam well.

The most anticipated night of the year is coming soon! It's time to start thinking about outfits. And even if it will Evening Dress or a suit, then you should not neglect the integral attribute of this holiday - cap of Santa Claus!

In this master class we will connect Christmas hat of Santa Claus with a beard.

For knitting we need:

• Yarn;
• Hook.

You can take yarn in either red or blue. But since the element of fire will patronize this year, we will take red yarn.

First we will knit elastic band for a hat... To do this, we type air chain from the required number of loops. It depends on the girth of the head.

It is better if their number is divisible by 6. It will be easier to subtract this way. Therefore, when the girth was measured, we add the missing number of loops.

So, we typed an air chain and knit 1 row of CCHs. Do not forget to make 3 lifting loops at the very beginning of the row, which will replace the first CCH.

We connect to the 3rd lifting loop of this row.

Now we will knit convex and concave columns. At the beginning of the row, we make 3 lifting loops. And we knit 1 convex column, then 1 concave column in the next column of the previous row.

So we will alternate until the end of the entire row.

The next 8-9 rows will be exactly the same.

You can knit not 9 rows, but 18 or 20, and then tuck the elastic. The hat will turn out with a lapel.

We knit 12 rows of sc.

Now we count the total number of loops and divide by 6. For example, if there are 72 of them, then dividing by 6, we get 12. So, in the new row we will knit 11 RLS, and we knit 12 and 13 loops together.

1 row without deductions.

Along with a decrease in 9 loops, that is, in 10 loops.

1 row without deductions.

So we knit until there are only 18 loops left.

Then we subtract in every 3rd loop of the row.

We get 12 loops and knit 1 row without deductions.

We subtract through 1 loop. We get 6 loops.

1 row without deductions.

We subtract in each loop until closing.

We make a small pom-pom from white yarn.

Now we shape the beard.

Take the white thread and cast on 20 stitches.

We knit 2 sc in each of these loops.

At the end, cast on 20 stitches again and repeat.

So we knit the required number of spirals.

We attach the beard to the hat. Santa's hat with a beard is ready!

In order to knit an elf hat for children, you will need:

• hook 3.0mm;
• 50g each of white and blue acrylic (250m100gr).

Abbreviations:

• vp - air loop
• ssn - double crochet
• lrssn - facial embossed column with a crochet, the hook is inserted not into the loop, but behind the column before work
• irssn - purl embossed column with a crochet, the hook is inserted not into the loop, but behind the column at work
• kill - decrease, 2 bars closed together
• ss - connecting post

Note: The hat is knitted from the bottom up, i.e. from elastic to pom-pom. The description of the hat is designed for the age of 0-3 months. In order to change the color, first make ss with a new color, and from ss vp ascent start a new color. Do not break the thread after each row (see photo).

Description:

Row 1: blue color (ss): dial a chain of 43 ch, connect into a ring (carefully look so that it does not twist), 3vp lifts (count 1 ssn), ssn into each loop, ss into the upper lifting loop.

photo - 1 row

Photo 2 row

photo - 3rd row

Row 4: (ss) 3 VP lifts, ssn the whole row, ss to the upper lifting loop.

Now we change the color of each row.

Rows 5-9: 3 VP lifts, ssn the whole row, ss to the upper lifting loop. Row 9 should be white.

photo - rows 5-9

Row 10: 3 VP lifts, (5ssn, ub.) To the end of the row. ssn in the stop. posts, ss in the upper lifting loop.

Row 11: 3 VP lifts, (4ssn, ub.) To the end of the row. ssn in the stop. posts, ss in the upper lifting loop.

Row 12: 3 VP lifts, (3ssn, ub.) To the end of the row. ssn in the stop. posts, ss in the upper lifting loop.

Row 13: 3 VP lifts, (2ssn, ub.) To the end of the row. ssn in the stop. posts, ss in the upper lifting loop.

photo -13 rows

On the this moment, you should have about 10 PRS. Then we knit the tail of the cap, about 10 rows, but if you wish, you can knit it shorter or longer, simply by knitting more or less rows, respectively.

Rows 14-24: 3 VP lifts, ssn the whole row, ss to the upper lifting loop.

Photo - rows 14-24

Row 25: 3 VP lifts, ub., Ssn to the remaining columns, ss to the upper lifting loop.

Then about 25 more rows.

photo - ponytail

Make a pompom in any way you know, for example, using a special device, like ours (see photo). Attach it to the tail of the cap.

Photo-tool and result

Here we have such a funny knitted hat. Until next time!

A hat with an elongated tip is simply adored by small children. She is associated with fairytale heroes and the fantastic places they inhabit. The child will certainly like such a product, and the skillful hands of the mother-needlewoman will put warmth and care into it. We do not postpone work until later, but with good mood let's start crocheting cap hats!

For knitting you need

• white and burgundy yarn;
• hook;
• scissors;
• needle;
• the thread is ordinary.

Cap Crochet cap - a detailed description of the work

1. We knit from the bottom up. First, we put on a chain of loops using burgundy yarn. To determine the desired length of the chain, we periodically make fittings, this will allow not to be mistaken with the size of the headgear. We recommend creating an even number of loops.
2. We form columns with crochets. The column must be knitted in each loop, we do not make any additions at this stage of the work.

   How to create crochet stitches

3. From the second line, we start creating an elastic band. We make 3 lifting loops, in the column of the previous row we form 1 column with a crochet. In this new column, we knit the front embossed column, after which the double crochet follows again. In this way, we form the entire row.

   Making a relief column

   Embossed stitching

4. We knit an elastic band using the method described above, it should consist of 5 lines.

   We form the next column of the canvas

5. Change the yarn to white and create a row simple posts with a crochet. Then we attach the burgundy thread without breaking off the white one. In red we knit the same row of double crochets. Create rows one by one, remembering to change the color of the yarn.

   We knit white and burgundy stripes

6. From line 4, we begin to reduce the loops. We count the total number of loops and divide them by 6, we make decreases in each segment. For example, if the number of loops in your product is 72, then we subtract every 12 loops.

   Moving on to decreases

7. Create the next line without changing the number of loops. We knit a new row in the same way as the 4th line (every 11th loop is already subject to reduction), after which there is a row without decreases, etc. We knit about 15-16 rows.
8. To make the elongated tip of the cap, we knit rows without reductions to the length you need.

You have probably seen that a hat-cap is popular in children's professional photo shoots, it will be quite easy to knit such an accessory with knitting needles, having initial knitting skills. But such a hat can be made not only for children. The adult model turns out to be youthful, catchy and comfortable. She adds a little playfulness and positiveness to the image. Grown people, too, sometimes do not mind playing pranks. You can also create a fun New Year's family bow by tying a Santa's helper style hat.

We knit a baby hat-cap with knitting needles in a step-by-step master class

The cap is also called "Pinocchio". You probably remember from Soviet cartoons and illustrations that Buratino was portrayed with a long nose in a striped mischievous cap with a pompom. Is this one of the popular cap cap variations? a striped long hat with a fluffy pom-pom at the end.

Such a model? a favorite of photographers for newborns. Nowadays, it is important to shoot a baby in a gentle manner during the first weeks from birth. Specially trained photographers are engaged in such photo sessions, and this type of photography is in great demand. Masters in this business have to connect imagination and try pretty hard to come up with an original image of a baby for photography. If you have a share of creativity, and you also want to organize a similar photo session for a child, then knit such a hat. It is guaranteed to decorate the photo and help preserve fond memories.

For everyday use, this headpiece is also great. Therefore, is it worth making it yourself so that the hat meets all your expectations? was warm, beautiful and original.

This master class describes the process of creating a hat for a one-year-old child, that is, it will be suitable for a head circumference of 43-48 cm. To do this, you will need:

• 2 skeins of acrylic yarn 150 m by 50 g;
• stocking needles No. 2.5;
• thick cardboard, compasses, pencil and scissors.

Let's start the knitting process:

1. With a blue thread, we collect 108 loops, then they need to be distributed over 4 knitting needles, 27 loops each.
2. The next 14 rows are the cuffs of the cap, for this we will use the pattern "elastic band 1x1".
3. The rest of the fabric is knitted with an ordinary front satin stitch. It is not worth cutting off a skein of light blue; you just need to attach a thread of white. We knit 6 rows with a white thread, and the next 4 rows we carry out with a blue thread. This alternation of rows on the stripes must be performed during the entire knitting process of the hat, in order to end up with symmetrical stripes. We knit with a straight cloth up to a cap height of 16 cm.
4. You can form the "tail" of the cap in the following way: on the right and left in each 4th row, we make decreases by 2 loops. The main thing is to make them symmetrically on the sides of the cap. So we knit 3 loops at once. After the work reaches a height of 30-32 cm, can you make reductions less often? in every 8th row.
5. In this way, we knit 10 cm, now the reductions need to be made in every 10th row. If you have the last two dozen loops left on the knitting needles, then pull them together with a thread.
6. Let's start making a pom-pom. For this purpose, you can take a special device. If you don't have this tool, it's okay, we use the available tools. With a compass on cardboard we draw a large circle, with an approximate diameter of 15 cm. In the middle we make a small circle with a diameter of 4 cm. Cut out the workpiece, making a hole inside it. There should be two such cardboard discs. We put them one on top of the other, between them we stretch a piece of thread. We carefully cut the yarn with scissors along the outer edge of the discs. We pull them with the thread that was between the cardboard circles, we tie them tightly. We straighten the pompom, tie it to the tip of the cap. We fasten all the ends of the threads on the seamy side of the product.

After all the steps, it remains to sew the canvas. For the final part of the work, you can take a hook. We crochet the edges of the cap using a connecting post. That's all, the hat is ready!

We disassemble the detailed creation of a female model with knitting needles

The cap sits perfectly on the fair sex. Best for this model will fit fluffy yarn of a monotone color. Then you should get a very original wardrobe detail!

To create a beanie hat for women, take:

• 100 g acrylic white yarn 400 m per 100 g.;
• knitting needles number 3.5.

With the help of these materials, you should have a medium-sized hat with a head circumference of 56 cm. When folded, the dimensions of the headdress will be: 25 cm wide and 48 cm long.

The scheme of the patterns used: "Putanka", knit in turn 1 front loop with 1 purl, and the pattern is shifted in each row by 1 loop. Knit: where knit rows need to be knit with knit stitches, purl loops- purl rows.

Let's start creating a women's headdress with knitting needles:

1. We collect 75 loops and knit 11 centimeters with the "Putanka" pattern.

We knit the next 14 cm with an ordinary front stitch.

1. We make decreases at the beginning and end of every sixth row, 1 loop each.
2. After 48 cm after the beginning of the hat, close the loops.
3. We tighten the last loops and sew the seam using any convenient method. Also make a big and fluffy pom-pom, sew it on the top of the cap.

Video tutorials for beginners on the topic of the article

You will also learn how to knit a cap-cap with knitting needles from the videos collected below. Good luck with your creativity!