Have you decided to sew a dress, but don't know where to start? Let's try to help. We won’t say that this matter is very simple, but it’s not that complicated! Our advice will definitely help you cope with it. It’s not the Gods who burn the pots. So, let's begin.
HOW TO SEW A DRESS: WHERE TO START.
Model selection. For the first time, choose a simple dress model. Fewer connecting and decorative seams and details. Stop your gaze on laconic things. Beauty is in simplicity. Don't forget about bright and stylish accessories, they will complement the image.
Choice of fabric. The fabric must match the purpose of the dress and pay attention! easy to work with. That is, it does not cause additional difficulties when processing seams or ironing. Textured fabrics, pile fabrics, chiffon, natural silk... they are all very beautiful, but they will create a lot of unnecessary problems with the risk of throwing the failed masterpiece into the far corner. Let it be, for the first time, without a pattern that requires alignment at the seams.
Butt. It refers to all the additional materials that are required to sew your dress. These are adhesive (non-woven fabric, dublerin), edging, zippers (for the first time we advise you to choose models, preferably without it, because not every beginner can handle a zipper beautifully and correctly, and even more so a hidden one. Well , or practice on an unnecessary piece of fabric.), lining, accessories, threads, etc.
Pattern. How to sew a dress without a pattern? For a beginner, the task is difficult. Even if the dress consists of a rectangle, it is not some abstract rectangle. It is tied to a specific figure with the help of measurements, and to the dress model - with proportions and details. Therefore, a pattern is still needed!
Simple dress patterns:
For these simple dresses the pattern is built on the basis of a rectangle, and is based on measurements taken from the figure. The dress is quite voluminous, oversize, the sizes shown in the figure correspond to 42-50 rubles. 
Look how original the dress is! Here the fabric print comes to the fore. The dress pattern is extremely simple. There is a rule of good taste - the brighter and more decorative the material, the simpler the style should be. 
For those who like a non-trivial approach to creating clothes, this solution will be interesting. The dress is a tunic made of rectangles sewn together. This simple dress looks very stylish if it is made of thin suede or suede-like material. 
READY DRESS PATTERNS.
If you have a ready-made dress pattern, then consider that you have already done half the work. A good pattern increases your chances of getting something new significantly! We have it on our website clear patterns easy to sew dress models for beginners and for those who have experience in sewing clothes.
Pay attention not only to the photo of the dress, but also to the technical drawing. It will help you more clearly understand how you can use a ready-made pattern, adapting it to your own look. It’s no secret that dresses made from the same pattern, but from different fabrics, look different.
For example, this is an absolutely wonderful dress.
The photo shows a model wearing an off-the-shoulder dress from Fendi. Fendi is a world famous Italian brand founded in 1925. He is considered the personification of taste and style. The brand's clothing is popular on the catwalk, in everyday life and on the set. At different times, the company's designers developed costumes for such famous films as La Traviata, Once Upon a Time in America, The Godfather and many others. We suggest sewing a similar jacket and trying on a Fendi look! 
You can buy a ready-made off-shoulder dress pattern here. You can print it in life size on a regular printer. Available sizes for the pattern are from 40 to 52.
Sewing dresses by finished pattern and, moreover, with detailed description technology will not cause much difficulty even for a beginner. The main thing here is accuracy, accuracy and attentiveness. The result will not disappoint you, because this model is very relevant not only in summer, it can be sewn from elegant fabric, resulting in a beautiful evening dress.
The level of complexity of this model is suitable for a beginner.
Cut details:
From the main material:
1. Front – 1 piece
2. Back - 1 piece
3. Lower back - 1 piece
4. Lower part of the front - 1 piece
5. Sleeve – 2 parts
6. Frill at the bottom of the sleeve – 2 parts
7. Burlap pocket - 4 parts
8. Neck frill - 1 piece
When cutting, it is necessary to add seam allowances of 1.5 cm to the details. The average fabric consumption for such a dress is 2.5 m (with a width of 140 cm). Recommended fabrics - summer easily draped light fabrics made of cotton, viscose, silk and their combinations ( natural fabrics Before cutting, it is advisable to decatenate (wet in water), as the dimensions may change).
Layout example: 
You will also need approximately 2.0-2.5 m of elastic band (elastic band).
Sewing sequence:
1. Fold the back parts with the shelf right sides inward and, aligning the cuts, stitch along the side seams. Overcast the allowances and iron them towards the front part.
2. Also stitch the side sections of the sleeves. Iron and overcast seam allowances.
3. Fold the sleeves with the front and back along the armhole lines. Pre-baste and then stitch. Cut seam allowances to 1cm and overcast.
4. Sew the ruffle details of the bottom of the sleeves and neckline into a ring, iron the allowances once. Iron the pieces in half.
5. “Place” the finished part of the neck frill onto the neck of the dress and, aligning the sections, sew with a 1.5 cm seam (Fig. 1, line 1). Overcast the allowances together and iron onto the frill piece. Then stitch the seam allowance onto the frill piece, 1.2 cm away from the seam (Fig. 1, line 2). Between the line and the seam you get a drawstring for the elastic. Do not close the stitch into the ring, leave a distance of 2.5 - 3 cm long to insert the elastic.
6. Measure the circumference of the shoulders (each individual), subtract 4-5 cm for the elasticity of the elastic. Thread it through the drawstring and close the stitching into a ring.
7. Sew a frill on the sleeves according to the principle of the neckline. 
Picture 1
8. Place the pocket burlap pieces face down on the front side of the front panel and the front side of the back panel, align the cuts and stitch them with a 1 cm wide seam (Fig. 2, lines 1 and 1`) so that the pocket lining overlaps the line limiting the length of the entrance to the pocket, the width of the seam of the burlap pocket. The seams are overcast and pressed onto the pocket burlap. 
Figure 2
The lower section of the skirt is processed with a narrow (0.7 - 1.2 cm) hem seam. Iron the seam.
9. Fold the shelf and back parts with the right sides inward, aligning the cuts, and connect along the shoulder seams.
10. Grind down side seams skirts with a seam 1.5 cm wide, at the same time grinding the burlap pockets with fastenings at the beginning and end of the pocket (Fig. 2, line 2). The sections are overcast and the pocket is ironed.
11. Sew the bodice with the skirt (Fig. 3, line 1). Cut seam allowance to 1cm and overcast.
12. Cut the elastic, measuring around the waist. Sew into a ring with a 1.5-2cm overlay seam. Sew on the seam reserve (Figure 3, line 2). 
Figure 3
A fitted knitted dress with drapery is surprisingly easy to sew and looks very stylish. Here you need to make the right choice with the choice of fabric. Let the knitwear not be too fluid, but still softly drape and good quality so that pellets do not form when worn (the base should be natural threads).
2 IN 1: PATTERN OF A DRESS AND TOP WITH A SWING NECKLINE (SIZE 40-60)
Details of the cut of the dress (A) and top (B):
Shelf – 1 piece
Back – 1 piece (with fold)
When cutting, add seam allowances of 0.7 cm, along the neckline and armholes - 1.2 cm, along the hem line - 2 cm.
The average fabric consumption is 1.5 m for a dress, 0.85 m for a top (with a width of 140 cm).
An example layout for a dress is shown on the left, for a top - on the right 
Sewing sequence:
1. Place double lines on the front along the side seam between control marks A and B, C and D, E and F (for a top - only between marks E and F) at a distance of 0.5 cm from each other, the first line along the allowances side seam, and the second along the shelf, so that they are located on both sides of the side seam line of the product in finished form. Pull these stitches with threads to the lengths indicated on the pattern, tie the ends of the threads.
*** If desired, you can place small folds along the side seam instead of gathering
2. Place double lines on the front along the shoulder seams from the neckline to the G marks at a distance of 0.5 cm from each other, the first line along the shoulder seam allowances, and the second along the front, so that they are located on both sides of the shoulder line seam of the finished product. Pull these stitches together with threads to a length equal to the length of the shoulder sections of the back between the G marks and the neckline, tie the ends of the threads.
***If desired, you can place small folds along the shoulder seam instead of gathering
3. Align the front and back along the shoulder seams, folding right sides together. Join with a stitch-overlock stitch (or simply machine stitch and then overcast). Stitching is done from the back. Remove the auxiliary stitches that tightened the assembly. Press the seam allowance to the back.
4. Process the armholes of the product. To do this, fold the seam allowances in the armhole area (between the control marks), and then sew with a hem seam with an open or closed cut (in the first case, pre-overcast).
5. Fold the front and back with right sides together, aligning along the left side seam (no gathers). Baste and then join with a seam-overlock stitch (or machine stitch, then overcast). Press the seam allowance.
6. Fold the shelf and back with right sides together, aligning along the right side seam (with gathers), observing the alignment of the control marks on the shelf and back. Baste and then join with a seam-overlock stitch (or machine stitch, then overcast). The stitching is done from the back side. The gathering should be located at the bottom, otherwise, when stitching, the foot may displace the fabric, which may interfere with the uniformity of the gathering. Remove the auxiliary stitches that tightened the assembly. Press the seam allowance.
7. Fold the neckline of the product and finish it with a hem seam with a closed cut.
8. Fold the bottom of the product and sew it with a hem seam with an open or closed cut (in the first case, pre-overcast).
HOW TO SEW A DRESS WITHOUT HAVING A READY PATTERN.
Making a pattern for it is not difficult even for a beginner. Let's take a closer look.
For modeling you will need a base pattern of a semi-adjacent silhouette. You can create it using any pattern-making method. Of course, this will take up a lot of your time, but if you plan to continue sewing for yourself in the future, then you need such a foundation; you simply cannot do without it. By the way, it is also recommended to sew a base sampler from an unnecessary piece of fabric, after trying it on, take into account all the errors in the construction by adjusting the base pattern. 
The styling is shown based on a semi-fitted silhouette specifically to preserve the bust dart.
- the side seams must be straightened,
— we move the chest dart from the shoulder line to the side seam line, under the armhole. To do this, cut along the intended line from the side seam to the top of the dart, not reaching a couple of mm, close the dart at the shoulder and it will open under the armhole. Read more about transferring recesses here. You need to sew in the dart not reaching the center of the chest by 2 cm, reducing it to nothing. Those. reduce the length of the undercut by 2 cm.
If your figure allows you to make a dress with a more flattened silhouette, then you can use a base pattern with a straight silhouette, then modeling will not be needed at all.
This dress is not difficult to sew, but finishing will require time and perseverance. You can make the braid ala Chanel, which adds a special chic to the look, with your own hands. Look at the photo. The work is certainly painstaking, but creative. And what is the result! 
By the way, having a basic pattern, you can also sew yourself a basic dress, which, as you know, is necessary in any woman’s wardrobe. By slightly changing the neckline or armhole, making the dress cut at the waist, adding a sleeve, you will get a model to your liking.
Now let's change the pattern a little. For example, let’s create raised lines, deepen and widen the neckline, as in the first photo.
1 step. Let's move the chest and shoulder darts into the armhole. To do this, we will outline the relief lines running from the armhole lines, through the waist darts to the bottom of the dress. Let's cut and open the grooves in the armholes of the back and front. Read more about the translation of grooves in this article.
Step 2. Let's adjust the relief lines more smoothly. Let's lengthen and narrow the dress along the side seams. Let's add a slot. Slot width 4 cm.
When you look at prices in clothing and shoe stores, your feet naturally lead you to the bit equipment department to buy a brand new sewing machine. A question flashes in my head like a warning light: can’t I really sew a dress with my own hands? “This is unlikely to happen quickly,” the rational brain answers, and you stop at a crossroads: whether to go back for an expensive thing, or to go get a typewriter, or even go home.
Don't be afraid to start sewing
In fact, there are several options for creating outfits at home when you pay once for the purchase sewing machine and then you just buy pieces of fabric, which in terms of cost is 3-5 times cheaper than purchasing finished product. Remember, sewing a dress with your own hands is quick and easy when you master the techniques that we will describe today!
How to sew a dress in an hour: choosing fabric
In general, you shouldn’t worry too much about styles and complain about the fact that you don’t have cutting skills. In fact, there is a main law for beginners: choose a product with a simple cut, but the fabric should be catchy, expensive in appearance and touch, with beautiful design or original colors. It is also advised to choose fabrics that do not wrinkle easily in order to look neat in the product. It is best to create ensembles from knitted, viscose, angora fabrics. Naturally, they also choose flax, silk, calico, etc., which is more difficult to process, but it is better to start with low-wrinkle knitted fabrics.
You can either make the pattern yourself, or copy it in a fashion magazine, or draw curved lines directly on the fabric and safely cut it with scissors. You can master the first two options yourself, since the article is not enough to describe the method of constructing the basis for the pattern. I can only say one thing: ask a seamstress you know to make the base pattern for the dress for you personally, so that you can then apply it to a piece of fabric and model the styles yourself. For a nominal fee, a tailor will provide you with this service and show you how to use a paper pattern for a regular straight silhouette to make a product with a flared skirt, reliefs, flounces, a cut-off or high waist.
What you need to quickly sew a dress with your own hands: pattern on fabric
To begin with, choose a piece of material that is beautiful enough in itself, since the style will be simple. You will need a canvas size of 200 cm by 150 cm. Fold the material in half so that you have a piece of 100 cm by 150 cm in your hands. Take it so that your hands are spread wide to the side. Thus, it turns out that your arms are stretched out in a straight line and its length is 1.5 m, and a canvas equal to 1 m hangs down from you.
Draw with chalk or soap
Bring your spread hands together with the fabric - this way it will be folded in half again. The fabric for cutting is ready: the material is folded 4 times and is ready to be painted with smooth lines and cut. The side that is 100 cm down will be the length of the dress. The one that has a folded width of 75 cm is ½ shelf and long sleeve. From the top point, measure seven centimeters down and to the side, connect with a smooth line - this will be your neck. If you extend the line sideways, you get a boat neck. You can draw with either chalk or soap - the lines are the same, only the chalk is more difficult to wipe off later, and traces of soap can be removed with an iron.
How to quickly sew a dress with your own hands: draw the front and back front
From the middle, set aside ¼ the width of your hips + 1 cm for allowance and looseness of fit. Draw a strip parallel to the middle of the material along the resulting points. Let's say your hip circumference is 100 cm, this means that you should set aside 25 + 1 = 26 cm from the middle. These will be your front and back shelves.
We cut the sleeve
A one-piece sleeve will help you quickly sew a dress with your own hands. For beginners, this option is a good solution, and then you can experiment by making it cut-off, cutting out the armhole altogether, creating a sleeveless dress style, but for now let’s stick to a one-piece one. Set aside 20 cm from the top fold - this will be the depth of the armhole. Sleeve width at the bottom: measure your wrist or forearm (depending on which length you choose) + 2 cm for allowance. Connect the armhole and the bottom of the sleeve with a smooth line. Also, you can make a batwing sleeve, that is, extend the armhole almost to the waist or hips. And the line with which you will connect the bottom of the sleeve will look like a semicircle.
Marking the waist on the pattern
Tie your waist with a belt and use a measuring tape to measure a line from the seventh cervical vertebra to the belt at your waist. On the fabric, set this size away from the neckline - this will be your waist line. Measure 20 cm from this line - this will be the hip line. At waist level, make a 2 cm indentation and smoothly connect the armhole points, the curve of the waist and the hip point.
Sew the side seams and sleeve with one line, finishing the neck
Cut out the dress details along the lines. Take the remaining piece of material and place the unfolded neck circle on it. Trace the circumference of the neckline with chalk and add 1 cm to this line - this will be the seam allowance. Remove the panel of the dress itself and set aside 7-10 cm from the line that you drew. This will be another circle (or your facing for the neck). Sew it to the neckline; if you need to make a cut for the fastener, allow for this when cutting. Sew the side seams and your dress is ready in a jiffy!
Beginning needlewomen have the opinion that to sew clothes you need to be able to make patterns. And since this is not an easy matter, you can only dream about new things. But you can easily sew clothes without a pattern if you know how it’s done. Examples of work will be discussed in the article.
How to sew clothes without making patterns?
It's hard to accept that a perfectly fitting outfit doesn't require a pattern. But when sewing clothes, you can still do without numerous measurements and complex drawings, which not everyone can master. Moreover, anyone who has sewed an outfit in a studio remembers that even after taking all the measurements, the craftswoman tries on the outfit to fit it, since sometimes even a correctly constructed pattern does not guarantee a perfectly fitting suit. But are all these drawings really necessary?
Some craftsmen can easily sew clothes without a pattern by taking only 1-2 measurements first. Of course, they most likely rely on their experience and knowledge. But still, if they can work like this, it means that everyone can do it. The main thing is to pay maximum attention to the matter.
To learn how to sew without a pattern, you first need to practice on the easiest things that can be created from a simple piece of fabric. It is easy to work with such products, and the experience gained will be invaluable. It is also better to start with stretch fabrics that are not very heavy: they are quite easy to work with, and their ability to stretch can be useful for small errors made by inexperienced needlewomen.
How to sew new things following the example of old ones?
You can sew easily and simply without patterns, using clothes that fit you well. For cutting you need to purchase material similar in texture the right size. Now take a carbon copy and redraw the details of the clothes you want to sew. For example, you wanted to please yourself with a new blouse.
For good and high-quality cutting, align the redrawn parts of the back and front: the side and shoulder sections should be the same size. The same goes for the sleeves. If everything matches, lay out the designs on the fabric and start cutting. Connect all the resulting parts: the back and front shelf, then the sleeves. After finishing the neckline, bottom of the product and sleeves, you can try on a blouse sewn by yourself.
Required Tools
Regardless of how you are going to create clothes, making abstruse drawings or simply sewing without patterns, you should always have at hand necessary tools. Of course, you can do everything manually, but in this case the work will take a lot of time, and the quality of the resulting product will leave much to be desired. Therefore, it is better to have a sewing machine.
You should also have excellent cutting scissors in your arsenal that can easily cut any fabric. Additionally, you may need small scissors for cutting threads and for finishing work.
It will be useful to acquire a centimeter for taking the necessary measurements, a seam ripper and pins. You will also need crayons: even if you sew without a pattern, you will still have to draw elements of future clothing on the fabric.
Sewing a sundress with straps without a pattern
A sundress is exactly the thing that does not require much experience to sew. It is not necessary to have in-depth knowledge of correct cutting technology. So, we sew a sundress from a piece of fabric with our own hands without a pattern. Everyone chooses the length of the future product based on personal preferences. You need to add another 20 cm to it. This supply of fabric will be needed when finishing the top and bottom of the garment.
Before starting work, you need to measure the volume of your hips. Divide the resulting size in half and place it on the fabric. You should end up with rectangles. They need to be cut and sewn, leaving 15 cm on top. To process the armhole, you need to turn the edge half a centimeter and topstitch. The top of the sundress will have a drawstring. To sew it, the top edge is folded by 3 cm and stitched on the front and back of the product. You need to tighten the cord into the drawstring and tie it on your shoulders in the form of straps.
Different ribbons can be used as a cord. Leftover pieces of fabric will also work. You can simply cut ribbons of the required size from them. Otherwise, the cord will have to be processed. After hemming the bottom, you can try on the outfit you made.
Additionally, you can decorate the sundress with a belt or ruffles, it all depends on your ingenuity.
How to sew a tunic without a pattern?
You can sew a variety of products easily and simply without patterns. A striking example is the tunic. To sew it, take the material and set aside half the volume of your hips plus a couple of centimeters for a loose fit. You also need to set aside the height of the product, which may turn out to be completely different and will depend only on your choice. As a result, you should end up with a rectangle on the fabric. The material needs to be folded in half and two main parts cut out - the back and front shelves.
Now is the time to start finishing the neckline. On the back shelf, measure 2-3 cm down and 7 cm to the sides from the center of the rectangle. Round off the resulting cutout. The width of the neck on the front shelf should correspond to a similar parameter on the back, but the depth should be made larger. Now we sew the rectangles on the sides, taking into account the size of the required space for the hands. You also need to sew the shoulder seams. Then we start processing the neckline and cutouts for the arms. After hemming the bottom of the product, you can add an excellent tunic to your wardrobe.
You can make the neck on the front shelf smaller than on the back. This product will look quite original.
Sew a simple dress without a pattern
Quickly, without making patterns, you can sew light open dresses. To work, you will need crinkled or stretch viscose fabric and materials for drapery and finishing. The width of the product may vary, but for this model it is better to take larger fabrics. Choose an arbitrary length and cut out two rectangles of corresponding sizes. In the bodice area and at the top of the back, you need to sew seams with elastic thread. A regular elastic band can also be used. It is placed on the wrong side of the product and basted with a special seam. Two such seams, located at a distance of about two centimeters, will hold the dress well.
Now you need to process the product on the side, tuck and hem the top and bottom of the dress. The new thing is ready!
Festive dress without a pattern: how to sew?
Often, despite the variety of things in your closet, you want to wear something new to an upcoming event. It is not always possible to purchase new things. Therefore, if you are planning a holiday, but don’t have a suitable outfit, you can create a great dress in an hour without a pattern. Let's look at how to sew it in order.
To begin, take a skirt that fits you well and draw it onto the fabric, adding height at the waist. Now fold the fabric and cut out two pieces: the front shelf and the back. If the fabric is stretch, then you will just need to sew two parts. If the fabric does not stretch, it is better to make darts and insert a zipper. Now you need to process the bottom and top of the product, bending the edges.
For the top you will need a piece of similar fabric, 20 cm wide. The edges of the material need to be folded inside out and stitched. Now the cut needs to be attached to the skirt, stepping back from the center of the front by 2 cm, and sew it further, heading towards the back. For beauty, you can make a couple of small folds.
Sew a baby dress without a pattern
We can also easily sew a children's dress without patterns, using a regular T-shirt of the desired size. The item of clothing should be laid out on a piece of paper and circled. For these purposes, you can use cheap wallpaper: a roll will be enough for many such designs. Since the dress needs to be longer, size up at the bottom. Also make the pattern wider at the bottom - this will make the dress look fuller. When copying a T-shirt, do not forget to allow for the seam allowances required.
Cut out the resulting design, making the bottom slightly rounded, and transfer it to the fabric. Having cut out the shelves, start sewing them together. Once the pieces are joined at the sides and shoulders, start finishing the neckline and armholes. They can be additionally decorated with lace or ruffles. Now all that remains is to hem the bottom of the dress - and new outfit ready for your child. Using this method, you can sew a variety of children's dresses without a pattern.
To ensure that the dress turns out just right, take a loose T-shirt as an example. If the sewn item is too big for it, you can always sew it up.
Adding a little black dress to your wardrobe
Small black dress has always been a desirable element of every woman's wardrobe. You can sew it without a pattern if you have suitable knitwear. First you need to take a meter of fabric and fold it in half. Take a T-shirt with wide shoulder seams and apply it to the prepared fabric. We outline the top, and from the waist line we set aside the length that will be suitable for your future outfit. We cut out the resulting pattern and sew it on the side and along the shoulders. Try on the resulting dress. If the neck is too small, you will have to insert a zipper or make a fastener. You can also increase its size.
Now let's move on to the sleeves. We cut out two rectangles, the width of which should correspond to the circumference of your arm at the widest point, and the classic length is taken - 60 cm. We apply the resulting rectangles to the shelves and cut them along the armhole line. Now the resulting sleeves need to be sewn on. Following this algorithm, you will get a great little black dress.
We sew a dress of a simple model with a sleeve. This dress is easy to sew yourself. To do this, you need to use this pattern to cut out the front and back of the dress, as well as the sleeves (2 parts), a strip of the top of the dress (yoke) 2 parts, a strip of the top of the sleeves (straps) 2 parts and a belt.
We sew the yoke to the front of the dress, while gathering it. We do the same with the back. Then we sew the straps to the yoke. After that, we sew the sleeves to the straps and the dress, gathering them a little at the top. Sew the sides. We hem the bottom of the dress and sleeves.
Sew a dress, pattern:
We sew a dress with our own hands in an hour. Even a novice dressmaker can handle sewing this dress. To sew this type of dress, the main measurement is the hip circumference, but if your hip circumference is smaller than the chest circumference, then we take the chest circumference as the main measurement. For a dress, it is best to take cotton fabric.
Making a dress pattern with your own hands:
We draw a rectangle whose width AB is equal to the circumference of the hips (chest) according to the measure, which we multiply by 1.4 (for folds). If you want to make a dress with more voluminous folds, then multiply the hip circumference by 1.6. We take the height of the rectangle to be the length of the dress you want to make, minus the height of the bottom frill and plus the seam allowance for the bottom of the dress and the elastic at the top.
We take the length of the dress frill equal to the width of the dress AB, take the height of the top frill 15cm (without seam allowances), and the height of the bottom as desired.
We cut the dress with our own hands:
Dress (item 1) - 1 piece.
Top frill (item 2) - 1 pc.
Bottom frill (with adjusted width) (item 3) - 1 pc.
The seam allowance for the dress is 1.5 cm, for the frills we take 1.5 cm on the short side and one long side, 2.5 cm along the top of the dress, as well as along the top of the top frill and the bottom of the bottom frill.
target="_blank">), pointer !important;" title="We sew a dress with our own hands" />!}
target="_blank">http://ru4kami.ru/engine/classes/highslide/graphics/zoomin.cur), pointer !important;" title="We sew a dress with our own hands" />!}
Baste the bottom frill and the bottom of the dress, then stitch, trim the edges and iron.
The bottom of the dress (bottom frill) is tucked, basted and stitched.
Fold and then stitch the bottom edge of the top frill of the dress.
We sew a dress with our own hands in an hour. Even a novice dressmaker can handle sewing such a dress. To sew this dress model, the main measurement is the hip circumference, but if your hip circumference is smaller than the chest circumference, then we take the chest circumference as the main measurement. For a dress, it is best to take cotton fabric.
We create a dress pattern with our own hands:
We draw a rectangle whose width AB is equal to the circumference of the hips (chest) according to the measure, which we multiply by 1.4 (for folds). If you want to make a dress with more voluminous folds, then multiply the hip circumference by 1.6. We take the height of the rectangle to be 65 cm (in finished form, the length of the dress from the waist is about 40 cm).
We take the length of the frill of the dress equal to the width of the dress AB, take the height of the frill 12 cm (without seam allowances).
We cut the dress with our own hands:
Dress (item 1) - 1 piece;
Frill (item 2) - 1 pc.
We take 1.5cm seam allowance for the dress, 1.5cm for the frill along the short side and one long side, and 2.5cm for the top and bottom of the dress, as well as the top of the frill.
target="_blank">http://ru4kami.ru/engine/classes/highslide/graphics/zoomin.cur), pointer !important;" title="We sew a dress with our own hands" />!}
Baste the vertical seam of the dress.
Sew, trim the edges, iron.
Fold the bottom of the dress, baste and stitch.
Fold and then stitch the edge of the bottom frill of the dress.
Then put a frill on the top of the dress, sweep along the edge and as one piece
sew. Fold the allowances along the top edge of the frill and dress, then baste and stitch, leaving a small area open, and insert an elastic band 2cm wide into it. and adjusting its length, match the ends. Sew up the open section of the drawstring. 
We sew a dress using a simple pattern for the summer. For this dress model, thin elastic fabric is best suited.
Sew a dress, pattern:
Long dress pattern for summer season. This dress is perfect for relaxing on a hot day, especially if it is made from thin natural fabric.
We sew a beautiful black dress using a pattern with our own hands. For this style of dress, fabrics such as guipure, silk or satin are suitable.
Beautiful black dress, pattern:
We sew a dress with our own hands for the hot season. The peculiarity of the cut of this style of dress is that instead of straps, a circle is used, cut from the same fabric as the dress.
Sew summer dress with our own hands, size 38=M.. First, we make a basic pattern on paper. After basic pattern ready, use it to model the pattern for the dress, as shown below. For this dress model, fabrics such as silk, velvet, and satin are suitable.
Sew a summer dress, basic pattern:
target="_blank">http://ru4kami.ru/engine/classes/highslide/graphics/zoomin.cur), pointer !important;" title="Sewing a summer dress" />!}
Dress pattern:
Even a novice seamstress can sew such a dress with her own hands in half an hour. You will need very little for this: threads, sewing machine and a piece of knitted fabric 1.5 meters wide. We sew this dress in several stages.
First, we mark the pattern elements on the fabric, and then we cut out the holes. Next, we connect the parts marked in red. We process the edges with overlock. Now we are ready to conquer the whole world in a sewn dress with our own hands!
You can sew a dress for the summer with your own hands quickly and easily using a pattern. To fit a dress to your size, you simply need to put your measurements instead of the measurements on the pattern.
We sew a dress with our own hands, pattern:
We sew a dress with our own hands for the hot summer. For such a dress, it is best to take natural light fabrics. The pattern of this dress model is designed for size M = 40.
We sew a dress with our own hands, pattern:
Sew elegant dresses with your own hands on prom or for a wedding. Fabrics such as silk organza, satin and other light flowing fabrics are suitable for this dress. In the center of the belt we make a hole for inserting openwork fabric. The length of the dress at the front and back can be adjusted as desired.
We sew elegant dresses, pattern:
Long summer dresses always look very impressive, they are comfortable and beautiful. You can easily sew one of these dresses yourself using a very simple pattern given for size M = 40. The size of the dress can be easily changed by applying the measurements you need to this pattern. Separately from the dress, you need to cut out strips for the straps. Silk, satin and other thin natural fabrics are suitable for this model. For a dress of this size you will need 2.20 m of fabric or two heights of the dress (if the fabric is narrow in width 1 m - 1.20 m)
Long summer dresses, pattern:
We sew a transformer dress with our own hands to fit any figure; for this we need double-sided knitted fabric 1.5 m wide. length 2 m., all edges are processed with knitted bias tape. The dress consists of two parts: a belt and a main fabric. The width (volume) of the belt determines the size of the dress.
target="_blank">http://ru4kami.ru/engine/classes/highslide/graphics/zoomin.cur), pointer !important;" title=" DIY transformable dress" />!}
Transformation options, front and rear views:
target="_blank">http://ru4kami.ru/engine/classes/highslide/graphics/zoomin.cur), pointer !important;" title=" DIY transformable dress" />!}
target="_blank">http://ru4kami.ru/engine/classes/highslide/graphics/zoomin.cur), pointer !important;" title=" DIY transformable dress" />!}
target="_blank">http://ru4kami.ru/engine/classes/highslide/graphics/zoomin.cur), pointer !important;" title=" DIY transformable dress" />!}
target="_blank">http://ru4kami.ru/engine/classes/highslide/graphics/zoomin.cur), pointer !important;" title=" DIY transformable dress" />!}
target="_blank">http://ru4kami.ru/engine/classes/highslide/graphics/zoomin.cur), pointer !important;" title=" DIY transformable dress" />!} 
Skirt
All options:
No girl will refuse a beautiful new outfit. And especially if no one has such a thing. What to do if there is an important event coming up soon, but you have nothing to wear? A dress without a pattern with your own hands will save you even in the most unexpected situation.
How to quickly sew a dress without a pattern with your own hands?
In the life of every girl, sooner or later the thought arises that she has nothing to wear. At such moments you immediately want something new: dresses, pants and all kinds of blouses. What to do if you have absolutely no time or money to go shopping? There is always a way out! We offer you various master classes for beginners who will help you create a beautiful dress yourself.
You can easily give free rein to your imagination. This will help you come up with an exclusive design. You will sew a dress that no other girl has.
Let's start with the simplest straight dress. To create it you will need a large piece of fabric. If it does not crumble, it does not need to be processed. The bottom is easy enough to bend. Sew straps to the corners, and then wrap the fabric around the body (like a towel) and put your hands through the straps. Ready!
If you wish, you can complement the look with a belt or belt.
Before making a dress with your own hands, you might wonder how to cut an outfit without a pattern? The cut on the fabric can be done using a ready-made dress or a T-shirt or tank top. Cut out necessary product You can also take measurements and draw the outlines of the future dress directly on the fabric.
Making your own homemade dress without a pattern
Clothes for home should not only be convenient and comfortable, but also beautiful. Who said you should only wear old ones at home? sports trousers? Sew something elegant and practical loose dress!
To create it, knitwear or cotton is suitable. Fold the material in half. Attach a T-shirt. Trace the shirt from the top to the waist. Next, gradually begin to increase the width. Adjust to desired length. Don't forget about seam allowances. Cut it out.
Sew side and shoulder seams. Fold and trim the sleeves and neckline. To make the dress more comfortable, sew on one or two pockets. Such a plan can be done home bathrobe. To do this, one of the parts of the dress must be cut evenly along and a zipper or buttons must be sewn in.
Did you unexpectedly receive an invitation to a party, but didn’t have time to prepare your outfit? Don't worry, you can easily make a beautiful holiday dress at home. To do this, you don't need to waste time creating a pattern.
A small black dress that fits to the knees is a win-win option. It was, is and remains a classic. This outfit will look elegant and unsurpassed. To create it you will need one meter of stretch fabric, scissors and chalk.
Creation technology:
- Fold the material in half.
- Layer your wide-shouldered tank top over it.
- Trace the outline of the shirt using chalk or soap. Measure the desired length from the waist line. A dress just above the knee will look beautiful.
- Cut out the dress along the outline. Sew the shoulder and side seams, remembering to leave holes for the sleeves.
- If the neck is small, increase it.
- Let's start sewing the sleeves. Cut two rectangles from the fabric. The width should correspond to the circumference of the arm at its widest point. According to the standard, the length is from 45 to 60 centimeters.
- Attach the finished rectangles to the shelves. Trim them along the armhole line.
- Sew on the resulting sleeves.
The evening dress is ready! In it you will become a real star of the party!
In this style it will look great and New Year's dress. On New Year you can choose a more festive fabric. For example, velvet, knitwear with sparkles or sequins. If desired, you can do more short sleeves or remove them altogether. In this case, it is better to make the shoulders wider so that the dress does not look like a long black T-shirt.
Without a pattern, you can make a dress incredibly quickly - in an hour, in two, even in 5 minutes or 15 minutes. To create a holiday dress in a hurry, you will need stretch.
Take a piece of fabric 140 centimeters wide and 160 centimeters long. Fold in four layers. Measure around your waist and slightly below your waist. Round the edges. Measure out a quarter of the measurement from the middle. Using chalk, draw an upward line 60 centimeters long. Carefully sew around the neckline. The seam must be perfectly straight. Cut a neck 40 millimeters deep and 40 centimeters long. A quick holiday outfit is ready!
If you're going on holiday, why not make some original beach outfits at home?
Drawstring dress
Draw a rectangle on the fabric using a chalk. Its length and width depend on whether the dress will be a tunic, a Greek dress, a sheath or a wrap dress. The back and shelf should be the same in shape and size. The shelf can be decorated with embroidery, beads or sequins.
Sew the side seams. Make a drawstring at the waist. We will then insert the tape into it. Thanks to this, the summer dress will be tied at the waist.
Take a light flowing fabric. Silk, crepe, muslin, satin are perfect. The outfit will have only one seam on the back. This almost one-piece dress is quite simple to make.
Take a rectangle measuring two to three meters (depending on the number, density of folds and your size). Make a cut in the center to a depth of about 7 centimeters on the neckline. Decorate the top edge as a drawstring. Insert two ribbons. At the back, sew the ends of the ribbons into the seam on the back. From the front, take them out of the drawstring and into the cut. They will be tied at the back of the neck, which is very comfortable to wear. Also tie the dress under the bust with a ribbon.
This dress option is perfect for warm weather. It will be an excellent option for a walk on the embankment, a romantic date or meeting with friends.
Delicate and elegant floor-length dress - versatile outfit, which is suitable for both skinny and full figure. It visually makes the girl taller and hides all flaws. To make it, you will need two lengths of fabric - from the shoulders to the waist with a width of 140 centimeters and another 10 centimeters for the hem. Skinny girls the dress will suit according to the figure. And for girls size 52, a loose flowing dress is suitable. They will also look great in a bat dress, hoodie, kimono, straight, sheath, tunic.
Take a rectangle of fabric for the top of the dress. Fold it in half. You will get the length from shoulders to waist plus ten centimeters. Cut it. From the edge, set aside the width of the sleeve - 25 centimeters. Set aside 45 centimeters from the bottom. Between the sleeves, measure the width of the hips plus 9-15 centimeters.
Cut it. You will get a shelf and two sleeves at once. Sew the side seams and the areas where the sleeve slits are located. Fold the top in about ten centimeters. Sew for the elastic, leaving a small frill. Insert the rubber band.
Also turn up the sleeves by ten centimeters. Sew for the elastic, insert the elastic. Sew a rectangle for the skirt. Make gathers or pleats in the area of the waistband. Sew the bottom and top of the dress. Decorate your waist with a strap, wide ribbon or belt. This pattern can also be used to create a beautiful summer blouse.
Children's dress without pattern
You can easily make a dress at home not only for yourself, but also for a girl. You can sew a simple one for your child everyday dress in the form of a sundress or tunic. He will feel comfortable and comfortable in it.
In children in kindergarten and the school constantly hosts various events, to which children come in beautiful outfits. You can make an interesting dress with or without a pattern. A festive outfit can be made with a tulle skirt. In such a lush and airy dress, the girl will feel like a real princess.
At home, even without a pattern, you can create an original and exclusive dress, from which you will be delighted. For sewing you will need only 15-60 minutes, which is very convenient and economical. Don't be afraid to create - you will succeed!