The article about knitted flowers turned out to be quite popular. Therefore, we continue to publish a collection of knitted flowers.

Pansies:
knit the first flower
diagram 1. Cast on 6 chain loops with eggplant-colored yarn, close them in
ring. Knit the 1st and 2nd row according to pattern 1. Knit in orange
3rd row.
Knit the second flower according to pattern 2. Cast on 6 chain stitches,
close them in a ring. Orange yarn and knit from 1st to 4th row
scheme 2.
Bud: cast on 6 air loops from eggplant-colored yarn, close them into a ring. Knit rows 1-4 according to pattern 3.
Assembly:
starch the flowers and bud, put the second flower on the first,
place on a plastic stem and secure with stamens. buds
place on plastic stems.

Knitting pattern for trefoil brooches

The following flowers are very easy to connect together

We continue to publish a collection of knitted flowers.
Knitted daisies.
The core and petals of the flower are knitted with contrasting threads.
We knit a small flower:
cast on 5 air loops and close them in a circle with a half-column.
1st row: one air loop for lifting, 12 single crochets.
2nd row: *7 air loops, in the second loop we knit a stitch without
double crochet and then 6 single crochets, knit the 6th stitch in the second
circular column*; repeat from * to * 5 more times (total 6
petals).
Row 3: tie all the petals according to pattern 1.
Core of a small flower:
cast on 2 chain stitches.
1st row: 5 single crochets in the 2nd chain stitch
Row 2: We knit 10 single crochets behind the back wall of the loop of the previous row.
Row 3: increase through 1 stitch = 15 stitches.
For a small flower you need to finish knitting and break the thread. For a large flower we knit the 4th row: we make increases through 1 loop = 22 loops.
We knit a large flower according to pattern 2.

small flower and the center of a small flower

big flower

Knitting pattern for daffodils:

Designer flowers from Nelya Solovey:

Master class on knitting a flower “Common poppy, field poppy” from Elena – koluchka.

1. Close 8 VPs into a ring. (Yarn “Tenderness”)
2. Knit 12 sc in half loops.
3. In the same half-loops, knit the third row 16 RLS.
4. In the fourth row, 21 sc are knitted in the center of the “berry”.
5.6. Turn the “berry” over and knit a row of 21 sc.
7. Take more fine yarn(“Tulip”), pull the loop from the center of the “berry”.
8. Insert a hook and loop before the last row of sc, pull it out and knit a loop from the thread under the “berry”.
9. Knit sc for the edge of the “berry”, 3 ch, sc for the edge of the “berry”.
10. Make the other six jumpers in the same way, pulling the loops from the center of the “berry”
11. Knit a row of 21 sc.
12. On each loop of the previous row, perform a “stamen”: 16 VP, SS (21 pieces)
13.14. For the petal, attach the connection from the inside. stitch and knit
first row 10 VP, SS. Second row: tie the first row with 12 sc. Third and
fourth row: 14 RLS. Fifth and sixth row: 16 RLS. Seventh, eighth,
ninth: 18СБН. In the tenth row, evenly add 10 loops (total 28
loops). Eleventh row: RLS, PS, SSN, SS2N, SSN, PS, RLS
(repeat three times).
15. Knit the second upper petal in the same way. Make the lower petals
a little more, increasing the chain of VPs of the first row by 2 -12 VPs.
Accordingly, the number of columns in each row of the bottom will increase by 2
petals.
16. Finally, tie the poppy petals with a crawfish step (Canaris yarn 203 m -20 g).
This flower can be used for decoration knitted product or
like an Irish lace motif. An online topic has been opened on Elena’s website
knitting items using the Irish lace technique for poppy lovers

To knit flowers you will need: Iris threads in 2 layers, a 1.3 mm hook and a flower pot.
Knit petals according to pattern 1 - 6 pcs.

Center of the flower:
Knit in the round
1st row: 2 ch, from the first ch. knit (st. b/n, 6 v.p.) 6 times.
Row 2: From each st. b/n the previous rows, knit 2 tbsp. b/n, with
this is a chain of 6 v. p. prev. leave the row in front of the knitting.
3rd row: st. b/n.
See photo 1 for the result.

Now you need to tie the petals with connecting posts in 2 take 3 pieces to the middle of the flower. The first 3 petals are tied to row No. 2 for the middle of the flower, and the second 3 - to row No. 3 (photo 2). For the stem you need to knit a row of st. b/n for connection columns and beyond knit in the round; if the stem is too wide, make decrease in the first rows, knitting 2 tbsp. b/n together. I reduced it to width row 8 st. b/n. Then the stem just fits a cocktail tube (for stability) (see photos 3 and 4).

Soil in a pot: In the last row of the stem, change the thread to brown. 1st row: 1 tbsp. b/n, (2 tbsp. b/n from 1 tbsp. previous row) 3 times, 1 tbsp. b/n, (2 tbsp. b/n from 1 tbsp. previous row) 3 times. 2nd row: 1 tbsp. b/n, (1 tbsp. b/n, 2 tbsp. b/n from 1 tbsp. previous row) 3 times, 1 tbsp. b/n, (1 tbsp. b/n, 2 tbsp from 1 tbsp of the previous row) 3 times. 3rd row: 1 tbsp. b/n, (2 tbsp. b/n, 2 tbsp. b/n from 1 tbsp. previous row) 3 times, 1 tbsp. b/n, (2 tbsp. b/n, 2 tbsp from 1 tbsp of the previous row) 3 times. Then we sew the resulting hexagons of earth of several colors together short sides. We tie it in a circle to the required width of the pot. To make the flowers in the pot stand stable, I cut out a piece of foam plastic according to the size of the inside of the pot and stuck tubes of stems there, and I glued the bound soil along the edge to the circumference of the pot.

Petal:
Dial 5 v. p. and knit in the round.
1st row: 1 v.p. lifting, 4 tbsp., 2 tbsp. b/n to the outermost v.p. chains,
2 vp, 2 tbsp. b/n in the same extreme c. n. chains, 3 tbsp. b/n, 2 tbsp. b/n in
1st ch. chains, 2 ch, 1 tbsp. b/n in the same loop.
2nd row: 2 tbsp. b/n, 3 half double crochets, 2 tbsp. b/n, in a chain of
2 ch. knit (1 st b/n, 2 ch, 1 st b/n), 2 st b/n, 3 half sts. s/n,
2 tbsp, in a chain of 2 vp. tie (1 st b/n, 2 ch, 1 st b/n).
3rd row: knit in single stitches, in a chain of 2 vp. knit 1 tbsp.
4th row: we knit with connecting stitches one in one.

Center of the flower:
1st row: 2 ch, from the first we knit 6 tbsp.
2nd row: 1 tbsp, 2 tbsp from 1 tbsp. of the previous row - repeat until the end of the row.
3rd row: knit st. b/n without increases.
Sheet:
1st row: cast on 20 ch, 19 double crochet stitches, 5 double crochet stitches from the outermost stitch. n. chains, 19 tbsp. double crochet
Row 2: st. b/n.
Assembly: We attach 3 petals with connecting ones
in columns to the last row of the center of the flower Then with threads of green
colors on the connecting posts we knit a row of st. b/n and further in a circle until
required stem length. Sew 2-3 leaves to the base of the stem. IN
I inserted stems into the cocktail tubes for stability, and
I tied 2 old CDs around the base. So that the flowers don't fall,
I sewed the center through the hole in the disc tightly to the binding from below.

Several schemes crocheted flowers to your piggy bank. They can be used to decorate a hat, dress, panama hat or make a brooch.

MATERIALS
Leftover yarn of various colors.
HOOK
Choose the size according to the thickness of your yarn.
Types of loops:
Air loop (v.p.): in p.
insert the hook, throw the thread over it and pull it through the loop.
Single crochet (st. b/n): insert the hook into the loop of the chain or bottom
row and pull out a new loop, grab the thread and knit 2 loops on
hook in one step.
Double crochet (st. s/n): make a double crochet on the hook, insert it into
loop of the chain and pull out a new loop, knit 3 stitches on the hook in pairs
2 doses.
Double crochet stitch (st. 2/n): make 2 double crochets on the hook, insert
hook into a loop of the chain and pull out a new loop, knit 4 stitches on the hook
in pairs in 3 doses.
Flowers: according to schemes 1,2 and 3.
DESCRIPTION OF THE WORK Flower “A”.
Dial a chain from the 16th century. p. and knit according to pattern 1.
ASSEMBLY
Roll the resulting braid in a spiral and secure the center on the wrong side with a few stitches.
DESCRIPTION OF THE WORK Flower “B”.
Dial a chain of 52 v. p. and knit according to pattern 2. Having finished the 4th row, cut the thread.
ASSEMBLY
Roll the resulting braid in a spiral and secure it in the center with the wrong side. sides with a few stitches.

DESCRIPTION OF THE WORK Flower “B”.
Dial a chain of 40 v. p. and knit according to pattern 3.
ASSEMBLY
Roll the resulting braid in a spiral and secure the center to the wrong side. sides
several stitches. In case of using flowers as a brooch,
attach with purl side pin.

Crochet has always been in demand, but to varying degrees. Today
this type of needlework is more popular than ever. Classic ones are integrated
types of knitting: fillet knitting pattern becomes the border of a summer jacket;
elements of guipure tablecloths - a lush decor of blouses. Napkin patterns
hat brims are knitted, and jacket yokes are used as collar motifs. There are many examples.
This is a natural process, a kind of creative game. In value in
preservation of traditions and their modern embodiment.

Have you noticed, dear craftswomen, that the emphasis in knitting is on
complex options that cannot be reproduced on a knitting machine?
One of these trends is guipure. It is designed to simulate complex and
expensive Venetian embroidery.
The best examples of such crocheted lace were produced by the Irish
nuns, so over time it began to be called “monastic”, and later
- Irish guipure. Please do not confuse with Irish lace, which according to
the method of execution differs from guipure. Classic guipure knitting
complex and painstaking. Because it imitated needle-embroidered lace,
then they used lace linen, thin cream or white paper threads
for knitting elements and very thin for meshes and brids. Modern fashion
takes into account our busyness, fast pace of life, desire to move faster
realize the intended product. She favors models
large knit from thick yarn. This is beneficial for beginning craftswomen.
You may have noticed that the mesh holding the elements together is rarely
used. “Adhesive” guipure fabrics are relevant. Steel elements
larger, the thread is thicker.
So, let's assume you are planning to knit a blouse entirely or
fragment with guipure elements. It is advisable to draw first
sketch on the pattern, you can improvise as you knit. Most
the compositions are occupied by leaves. IN various books and magazines is given
many patterns for knitting leaves. It is impossible to discuss them within the scope of this article.
manifold.
For example, a classic guipure sheet is usually knitted in two ways: with
an extension from one RLS (diagram 1) and with an extension on an arch (diagram 2).
At the same time, knitting methods can be different: for both half-loops, for
back half-loop, behind the front half-loop, behind the purl horizontal
half loop of columns of the previous row.
The texture of the sheet in the first photo turned out to be flat, in the second - ribbed.

Photo1. The sheet is crocheted according to pattern 1 using both half loops:

Photo 2. The sheet is crocheted according to pattern 1 using the back half-loop:

Photo 3. Complex sheet.

Crochet pattern for leaves 1 and 2:

Photo 4. Sheet 1 is crocheted according to pattern 2.

Pattern 3. Crochet a leaf.

Pattern 4. Crochet a leaf.

The shape of the leaf, knitted according to scheme 1, is wide at the cutting and sharp at the
end. Increases on the arch according to scheme 2 create a sharper edge on the handle
leaf shape. With a large number of dialed air loops (10-12) and
With the generally accepted indentation of 2 single crochets, the sheet turns out wide.
The leaf denticles are concentrated on the front part; the stem has a smooth leaf.
This form is good when combining them into a complex sheet (photo 3). At
a small number of air loops of the initial chain (4-6) sheet
It turns out narrow and when knitting in multiple rows - long. cloves
located along the entire length of the sheet (sheet 2 in photo 4).
What if the composition requires a large leaf with teeth along its entire length? Increase the number of single crochet stitches (diagram 3).
For clear, ornamental compositions, one or two types are used
leaves. Leaves of different sizes and shapes are drawn in the sketch: small and
large, smooth and curved. The rotation of the sheet is obtained when knitting
different numbers of sc on the left and right sides of the arch: 1 and 2, 2 and 3
give a slight turn of the sheet, and 1 and 3 give a steeper turn. Sheet 4 in photo 4
associated with turning in one direction (Scheme 4). Such a variety of forms and
the size of the leaves only decorates the composition.
To be continued …

Let's continue the conversation about knitted leaves.
Diagram 5 shows a sheet in which the turns are connected alternately in
different sides. A variety of leaf shapes decorates the composition and gives
her expressiveness. Experiment too. How else can you
get curved leaves? In addition to the toothed ones, there are rounded and
arbitrary leaf shapes. Often found in compositions are small
leaves connected by columns of different sizes. To add rigidity and
beauty, tie them with single crochets with “picot” or “crawfish step”
(see diagram 6 and 7).

Tip: do not knit more than 2-3 half-stitches in a row. Their function is to create
smooth transition from single crochets to double crochets.
Similar to knitting
small leaves seems logical to knit medium sized leaves
double and triple crochet stitches. Yes, it is possible, but the sheet even after
The binding turns out to be somewhat loose. The leaves will be medium sized
look better if you knit them with single crochets, half crochets and
with single crochet stitches on both sides of the VP chain (Diagram 8).
Tie such a sheet with single crochets twice in the same
column heads. Of course, add
Single crochet. For the cutting, knit 6-7 chain stitches and
In the opposite direction, tie single crochets on them.

Another sheet option: knit stitches of different sizes on posts without
Yarn over, which tie a chain of air loops on both sides
(Scheme 9).
Tie this sheet with bourdon: fold the knitting thread in half (this
bourdon), fasten single crochets in the middle of the bourdon, fold the threads
bourdon together. Then hold the thread along the fabric and tie
single crochets. Having tied the sheet completely, tie 6-7 sc around
threads (on bourdon) for leaf cuttings. Tie the VP, tear off the bourdon
unevenly, apply the rest to the knitting and knit sc in reverse
direction. Lastly, tie the connecting posts at the base.
sheet, break the thread and pull it to the wrong side. Use the tail of the thread
for sewing elements together.
If you are planning a canvas made of openwork, transparent elements, then
The way of knitting leaves changes. The diagrams show options for such
leaves: small (diagram 10) and medium (diagram 11). Double row binding
Sc will give shape.
Two more options openwork leaves are presented in diagram 12.
To be continued …

We continue to publish patterns of knitted leaves. Leaves in this part
real flowers and plants: clover, oak leaf, etc. They are perfect
For knitted appliques, brooches, color compositions.

Knitted clover leaf

Knitted oak leaf

For example, how you can use knitted leaves in a composition:

Knitted maple leaves

Good afternoon, today I want to show you how you can create flowers with your own hands using the crochet technique. I have collected in this article the simplest and most understandable lessons crochet flowers. Today we will crochet lilies, daisies, poppies, pansies, orchids, and I have also prepared an article on crocheting roses (blooming and in buds). I will show you the knitting method narrow petals, I’ll give you the diagrams branches with oval petals, I'll tell you how to tie voluminous flower with multi-layered petals and much more. I address this article not only to advanced masters, but also to beginners in this matter. So I will explain as detailed and clear as possible even for the most novice crafter.

Here I will consider several ways to create flowers crochet A in . But before I start giving diagrams, descriptions, and instructions - I want Make you fall in LOVE with this idea. I want you to understand how beautiful crocheted flowers can be. I want to show what opportunities will open up for you when you realize that you can crochet any flower and even from a photograph (without a diagram or description) understand what technique it is crocheted in.

So, let's see what prospects the ability to crochet a variety of flowers opens up for you.

FOR WHAT PURPOSES are flowers knitted?

(which can be decorated with crocheted flowers)

Knitted flowers can be used as table decorations.

They can be simply placed in the center of each plate (as in the left photo below) or decorated with a crocheted flower on a napkin ring (right photo below),

Knitted small flowers can decorate a greeting card (naturally, the size of the threads and hook needs to be chosen smaller) so that the made flower is suitable in size to ours greeting card. You can also use such knitted flowers decorate gift packaging – tie with a lace and glue a crocheted flower on top.

Your first knitting projects in the simplest colors can be used as a bookmark for the book you are reading.

Knitted flowers can be used as decorative elements for knitted jewelry. For example, in the photo below we see wide crocheted bracelets decorated with flowers of various sizes and colors.

Once you understand how easy it is to crochet a flower, you will be able to believe in your ability to crochet these bracelets.

Crocheted flowers can decorate a handmade bag (as in the photo below).

And if you knit flowers small crochet And thin threads then the result is jewelry-quality work and such flowers can be used as part of crocheted jewelry.

The ability to crochet flowers can also be useful when decorating a wedding. You can make something like this from knitted flowers voluminous flower heart(as in the photo below).

Also bridal bouquet can be crocheted. This is a good alternative to fresh flowers. A bouquet that will never wither and will always be kept by the one who catches it in flight.

Can be done crochet gift bouquets with your own hands for family and friends.

Knitted three-dimensional flowers are used as decoration on hats and caps for girls.

I liked the idea of ​​decorating not only hats with crocheted flowers, but also caps with a visor. A beautiful bright headdress for a gentle girl.

You can also find a use for the colors you have associated in home decor. For example, decorate sofa cushions with them.

Or you can make this educational mat for your child (or a seat cover for a stool).

You can place knitted flowers in a frame in the form volumetric elegant panel painting. And decorate the living room with them. Here are a few photographs below that illustrate this idea in the most convincing way.

Well, now that you have already seen the full potential of the beauty of crocheted flowers, let's begin our work and create your first crocheted flower. We will start with the easiest flowers to make, and then we will make more complex patterns.

So, the simplest crochet petal flower.

HOW TO CONNECT

THE SIMPLE FLOWER

(for beginners)

The most simple circuit flower - this is the MIDDLE(a ring of air loops tied with posts) + PETALS(alternating low and high columns).

That is, to make the petal look like a SEMI-CIRCULAR SHAPE, we knit low stitches along the edges of the petal, and high double crochets in the middle of the petal.

Often in a simple flower the PETALS look like double crochets knitted SEVEN PIECES AT A TIME in one chain stitch of the bottom row (as in the photo below). The end of each petal is a connecting stitch (similar to a single crochet, but with the entire stitch instantly knitted into one loop).

Having learned to knit a FLOWER using THIS PATTERN, you can use this skill to create cute little things for your daughters or nephews. For example, like these knitted sandals for children.

And if we want there to be a HOLE in the middle of each petal... then the petal row needs to start as a SERIES OF ARCHES OF AIR LOOPS connected around the middle circle. (In the diagram below, this hole-forming row is highlighted in red).

This principle is a ROUND MIDDLE + PETAL of high and low columns laid as the BASIS ALL PETAL FLOWERS. And every new scheme crochet flower is a slightly more complicated version of this principle common to all flowers.

In the photo below we have the same principle of tying a flower, but slightly modified (there are teeth added along the edges of the petals). One additional detail to the GENERAL PRINCIPLE OF THE SCHEME - and we get a flower of a different shape.

VOLUME FLOWER crochet

(how to knit multi-layered flowers)

Lots of flowers crocheted have more than one layer of petals - when the petals bigger size peeking out from under the smaller ones.

In the photo below we see an example of such a voluminous multi-tiered flower.

(front view + rear view)

Here I am attaching a MASTER CLASS in step by step photos. From this lesson you can see exactly how such circular layers of petals are created. Every layer-tier of petals knitted with threads of different colors so that it is obvious how and what needs to be done to knit a three-dimensional flower.

And now that we understand the basic principles of knitting simple flower, let's start COMPLICATING THE TASK. And let's look at the flowers more interestingly.

Crochet PANSIES.

Simple description

Knitting will be possible for beginners Pansy flower (see photo below).

It is also knitted simply - a round center made of chains (tied with connecting posts). And the petals - with high columns of several crochets.

This flower has knitting in 3 stages.

The first stage is creating the middle (yellow chain, tie with connecting posts). Then tying the middle with dark purple...

Second stage - 2 purple petals are knitted (first 2 arches of air loops - in the upper part of the core) And then over each of the two arches we build up the petal itself (stitches with two crochets on the sides and three crochets in the center of the petal).

Third stage - knit three light petals - usually like other petals (the main thing is to divide the middle circle itself INTO THREE EQUAL PARTS - and tie each part in the shape of a petal.

Pansies can be tied and according to a different scheme - like in the photo below.

Or you can come up with your own design and crochet this flower. (examples in the photo below).

The next simplest flower is the daffodil.

How to knit flowers

crochet daffodils.

In the photo below we see the principle by which the daffodil flower is connected. Knit here first yellow (or orange) CUP... and then petals form from the BOTTOM of this middle.

Each petal is columns with different numbers of crochets... along the edges of the petal there are single crochets - and the closer to the center, the more crochets on the column. And in the very center of the petal there is ONE AIR loop (so that the petal has a sharp corner).

For example, a description of knitting such a petal may look like this - connecting post + st. single crochet + tbsp. double crochet + tbsp. with two double crochets + tbsp. with three yarn overs + one air + st. with three double crochets + tbsp. with two double crochets + tbsp. with one crochet + tbsp. single crochet + connecting stitch. That is, first we go by increasing the number of yarn overs - and after the center of the petal we go by decreasing the number of yarn overs in the column. And we get a pointed, oblong narcissus petal. (from the left photo below).

What if we want to tie daffodils? With right picture in the photo above, then the description of knitting a petal will look like this:

FIRST HALF OF A PETAL(let's go up)

connecting post + 2 air (for lifting) + st. double crochet + tbsp. with 2 double crochets + tbsp. with 3 double crochets + tbsp. with 4 yarn overs + 2 air stitches (for a tiny corner at the top of the petal)…

SECOND HALF OF THE PETAL(we are going downhill, so it’s the same alternation, but in reverse order)

Art. with 4 double crochets + tbsp. with 3 double crochets + tbsp. with 2 double crochets + treble crochet + connecting

Very funny idea give someone a bouquet of live daffodils, among which voluminous knitted flowers are unobtrusively lost - I think the recipient will not immediately notice that not all flowers are made by the hands of nature.

How to crochet

FLOWERS LILY OF THE LILY

And since we have learned how to knit a central cup for daffodils, we can also knit a bouquet of lilies of the valley - the cups of lily of the valley flowers are knitted in exactly the same way as the cups inside the daffodil. We also knit in the round... and add so many loops so that our circle is not flat, but wrapped in a deep cup.

All that remains is to link wide leaf of lily of the valley. Below in the photo I attach a pattern for knitting a lily of the valley leaf.

And here is another pattern for knitting a lily of the valley flower . Already with a large number of rows in the flower cup, because the threads are thin and the hook size is smaller. But the principle is clear from the photo, without any diagrams - we knit a flower cup and along the edge of the cup we knit small ARCHES OF LACE to create a ruffled border along the edge of the flower(The EDGE is knitted according to the same petal principle of increasing and decreasing yarn overs).

How to knit flowers

WITH NARROW PETALS.

In the diagram below we see the principle by which flowers with fringed petals are created. Every petal is like this knitted flower This chain of air loops UP and descent from the connecting posts ACROSS THIS CHAIN ​​DOWN to the middle of the flower.

Chamomile petals They are knitted according to the same principle - only each petal is a double passage of stitches - two rows on each side of the petal.

And as can be seen on photographed master class– the petals are not knitted around the already finished center. But simply into a chain of air loops - AND ONLY THEN this chain is folded into a circle and the petals move apart in a circle like rays.

You yourself can choose the SHAPE of the PETALS, decide how many of these petals should be around the middle, independently determine the LENGTH of the petal...

In any case, you will get a cute daisy... and there is no need to be afraid, that you are knitting differently than in the pattern. You are your own master– try it yourself and see what happens. More petals mean they fit more tightly (picture 2 below). Fewer petals means there will be a distance between them (picture 1 photo below).

And when you learn how to crochet daisies, you can then turn them into elegant coasters - simply by tying them in a circle with contrasting colors green(as in the photo below).

Or you can crochet a flowerpot with daisies. Buy a small flower pot, sew a small volumetric pillow - such that it fits tightly inside the flowerpot. Then tie daisies and green branches and sew them on top of the pillow stuck in the pot. For greater heaviness and stability, you can pour sand into the pillow (a weighted flowerpot will not fall).

They knit according to the same “chamomile” principle. lily petals. Just the beginning of knitting NOT FLAT MIDDLE, and the volumetric middle in the shape of a cup. And then petals are tied around this cup like a chamomile. And we get a lily as in the photo below.

Knitted flowers

WITH WIDE PETALS.

Flowers with wide petals include poppies and orchids. Let's look at how to knit such flowers.

In the photo below you can see that first THREE petals are knitted around the black center. And then the hook goes under them and the NEXT THREE petals are knitted on the back side of the flower (so that they look out from behind the first petals).

But it can be done poppies with flat petals in one row. Like in this photo below (it will still be beautiful).

You can make the petals climbed on top of each other. This overlap of petals on top of each other happens on its own - because each new petal begins its knitting from the middle. First, the middle (central part) of the petal is knitted, and then its edges are knitted around this middle. And that’s why the edges stick out by themselves - overlapping with the neighboring petal. The diagram below shows how such a flower is knitted.

And here is a pattern for knitting wide petals of an orchid flower.

Here are larger white orchid flowers from the photo above.

If you don't have a pattern, but want to knit the right flower, then you need to start with a PAPER PATTERN. First, we cut out the petals of the desired shape from paper, then fold them into paper flower. And if we like the image of this flower - its size and proportions of the petals relative to each other - then we can start knitting.

The orchid with the photo above has 2 lower petals and the central petal is simple ovals(the diagram is in our article).

But the two side petals have the shape of “ears”. They knit easily. You need to look at the photo carefully and then you will understand how it moves master's hand, where is the beginning of mating? where is the continuation, and what does he do at the final stage.

The ear petal is knitted in 3 steps.

1 step (red)-straight chain of air loops (there is a red line in the picture - I counted 12 air loops in a row)

Step 2 (light green)- around this chain, single crochets are knitted in a circle to make an even oval (in the picture there is a light green line of rows). At the point where our oval turns, we knit 2 stitches into one stitch of the bottom row (there is a diagram of the oval in this article).

Step 3 (green)- now you need the EARS to grow on the left and right of the even oval... that is, the expansion of the orchid petals. First we knit the “lower ear” - see how the dark green line goes to the bottom - and how it zigzags to the left, increasing the rows of this ear to the right.

And then we go upstairs and knit the upper ear - with the same zigzag arrangement of rows...

Finally, we tie the entire petal in a circle so that it has a smooth edge.

RUSH METHOD

For knitting flowers.

If you knit a simple circle - but add in each row a large number of loops...then ours the circle will begin to wrinkle and worry- and we will get a round frilled flower. Like, for example, the voluminous poppy flower in the photo below. It does not have individual petals. This is just a circle - which itself has twisted into waves, due to the excessive addition of columns in each row.

Try it yourself - it's easy any number of columns- for example, three stitches in each loop of the previous row... or four (so that the wave is steeper)... or five stitches in each loop (so that the wave spins very tightly). Here in the photo below is an example of a poppy with a slight waviness on the petals.

Or you can make the waviness of the petals VERY STRONG. According to this principle of strong twisting, waves are knitted voluminous Clove flowers...

First, a wrinkled wavy circle is knitted. Then another circle. And maybe one more. And then these circles are folded together (not on top of each other, but next to each other) - into a wrinkled bunch with the edges UP. This sponge bundle is stuffed inside the sepal - the green calyx of the inflorescence. And it turns out to be a crocheted carnation flower.

FLOWERS CROCHET

with OVAL petals

You can still learn crochet ovals. And then we will be able to knit flowers with oval petals and leaves. For example, these knitted ones tulips or crocuses, or water lilies.

For such oval-petaled flowers, you need to learn how to crochet an oval. It is knitted simply - according to this pattern. The beginning of the diagram is the central row - a chain of air balloons and the first row of columns on it.

That is, first we knit the CENTRAL ROW of the oval... and then the knitting goes in a circle - around this central row.

If we want our oval to NARROW on one side, and on the other side it EXPANDED - then we can knit fewer stitches on the turn on one edge - and more stitches on the other edge of the oval.

This is how it is shown in the diagram below.

Using the same principle, pointed LEAVES are knitted. Let's look at crocheting leaves. Let's look at a master class on knitting a heart-shaped petal.

LEAVES FOR FLOWERS CROCHET

(master class and diagrams for beginners)

Below I am attaching a photo tutorial for crocheting a sharp leaf (it is suitable for lilacs, roses and other crocheted flowers).

Knitting this leaf starts from the center (like the oval) - the row should have an arched shape, so we start knitting with low stitches (single crochet) and in the middle of the row we knit high stitches (with 2 and 3 crochets).

Or such a sharp heart-shaped leaf can be knitted in a circle... that is, first we make a ring of balloons. And then in a circle we alternate single crochets (in the lower part of the leaf) and stitches with a large number of crochets (in the elongated part of the leaf. And then in a circle we make a tie around the entire leaf (to create a green edge-edge.

And below is a diagram of a clover leaf.

I also collected photographs of leaves of different shapes... where you can see exactly how they are knitted.

The master class below shows how to create one of the complex crocheted leaves.

Here are some ideas for crocheting flowers and leaves. I hope the master classes and patterns posted here will help you understand and feel that crocheting flowers with your own hands is simple, it’s quick, and there’s so much room for imagination.

Fall in love with this idea... Come up with a hat with flowers for your daughter, booties with flowers for your granddaughter. Create something warm and beautiful for your loved ones. And may everything work out for you.

Olga Klishevskaya, especially for the site

how to knit a rose and leaves

And so the ice broke! I'm starting to knit a hat

This wonderful lesson was given by a girl from Kharkov, Legendasun, on Osinka: http://club.osinka.ru/topic-51742?p=1978229#1978229

Rose
I really love these flowers both in life and in knitting. Very easy to make and beautiful.

yarn - YarnArt Begonia 169m/50g;
hook - No. 2.5.

The size of the rose directly depends on the chosen yarn, hook and the initially selected number of chain stitches. in a chain. I never type them by sight, because... I often tie the same hats and “a little more - a little less” doesn’t suit me. But the first time, of course, you need to go through experience.

We take this diagram as a basis.

We collect a chain of 69 vp.
1r. - we knit a dc into the 5th loop of the chain. Then through one loop into the next ch. we tie the chains with 2 dcs separated by 1 ch. We knit that way. to the end of the row.
2 rub. - knit 3 ch. lifting and turning the work. In the first arch we knit another 1 dc, 3 ch. and 2 dc. Then, to the end of the row, we knit 2 dc, 3 ch, 2 dc in each arch.

3 rub. - we knit 9 dc into each arch of the previous row. We start the first petal with 3 ch. We roll up the rosette, and that’s it. It really takes a long time to knit the 3rd row, but it’s worth it.

Leaves
There is no diagram, my improvisation. Very convenient for decorating “flower beds”.

We knit a chain of 15 ch. We knit a sc into the second loop of the chain. Then in each loop to the end of the chain - half-column, 2 CH, 2 C2H, 3 C3H, 2 C2H, 1 CH, 1 half-column, 1 RLS. We turn the leaf and reverse side we knit in a mirror order - 1 sc, 1 half-column, 2 dc, 3 dc, 2 dc, 2 dc, 1 half-dc, 1 sc. We connect with the help of SS to the tip.

Next, using a SS (only through the leaf), we knit a groove in the middle of the leaf. We knit an additional 25 ch. - 10 v.p. for the stem and 15 vp. for the second leaf, which we knit similarly to the first. We return to the beginning along the stem using the same SS.

We dial 15 v.p. for the third leaf and knit it in the same way as the previous two. The branch of leaves is ready. In the last 2 photos I showed how you can twist them. The first one shows a standard branch peeking out from under something. In the second photo the leaves are located as on the 3rd hat from this MK.

Flower
Looks vaguely like a lily to me.

We take this diagram as a basis. We won't change practically anything. But I always have room for the 7th leaf, although there are six of them in the original. Well, in the original the flower is in bud, but mine is always in full bloom.

You can start with 2 ch. and in the first of them knit 12 RLS. Or you can make a lazy loop like I did and first knit 1 ch from it, and then 12 sc and pull the free end. That. You can tighten the middle tighter.

We knit 11 ch. (10 vp - the base of the future petal and 1 vp rise). We knit a sc into the second loop of the chain, then into each end of the chain - 1 half-column, 6 dc, 1 half-column, 1 sc. (All columns are knitted into 1 half-loop of the chain, since then you will need to tie the second half-loop so that the third one peeks out.) We attach the petal to the base-middle, knitting one from two base columns. We collect a chain of 11 vp. and knit the second petal in the same way. That. All subsequent petals are also knitted.

The binding can be made in a contrasting color, or the same color. We attach the thread and, using the sc, tie all the petals one by one behind the back half-loop. At the top of each petal we knit 3 ch. Probably so that the ends are sharp. Look like that's it.

I made the headband on the last hat by twisting 6 threads of different colors into a rope, pulling it through the hat, tying the ends and weaving them into a braid, which I twisted with a monogram and sewed on. The monograms themselves can be made in different ways. You can knit chains from vp. and sew them on, or you can use a chain stitch. This is something closer to someone. On holey hats, I like to lay it out the way I want, and then sew it.

Quite often, in order to update an already boring handbag or add brightness to your favorite hat, some little thing is enough: brooches, appliques, embroidery... Today we will talk about the details: the crocheted flowers we offer for decorating hats, coats, bags will diversify your wardrobe, making any ordinary thing special.

A simple three-dimensional flower for a hat for beginners

We will need:

yarn (100% cotton, 50 grams per 94 meters;

hook No. 4;

large button.

Description

We crochet 4 s.. without n. in an amigurumi ring.

1 p.: 2 s. without n. in each st. = 8 sts..

2 p.: 2 v. p., *ss. in the next p., 2nd century p.*, from * to * = 8 arches.

3 p.: ss. in the arch, *1 in. p., 2 p. s n. in an arch, 1st century. p., ss. in the next arch*, from * to *, finish knitting.

4 r.: we connect the yarn to the 2nd r., knit ss. and the arch, *3 c. p., ss. in the next arch*, from * to * = 8 arches.

5 r.: (s.. without n., 1 v. p., 3 s. with n., 1 v. p., 1 s. without n.) - in each arch, finish knitting.

6 rows: connect the yarn to the 4th row, ss. and the arch, *4th century. p., ss. in the next A*, from * to * = 8 A.

7 p.: (s. without n., 1 v. p., 5 s. with n., 1 v. p., 1 s. without n.) - in each A.

Tighten the thread and sew on the button. The flower decoration is ready!

Simple flower: video MK

Dahlia for decorating the finished product

The original knitted flowers are ready! Use them as a brooch, hairpin or decoration of any wardrobe item at your discretion.

Violet: video MK

Thread - begonia, hook 2.1. 1 skein was enough.
I'll try to write how I knitted (from memory)
I knitted a strip around the circumference of my head from loin mesh(4 rows) - in a circle - the bandage turned out like this
Then I attached the thread and knitted the strip on top with fillet. I tried it on my daughter. The holes were large. I tied them with fans, but at the same time adjusted the pattern so that it did not expand, but vice versa
Fields:
When moving to the brim, I knitted 1 row of sc (I always knit 2-3 rows of sc, but here I didn’t knit it and the hat doesn’t fit so tightly to the head - I did this deliberately so that the hat would be looser at sea)
then 3 rows of arches from 5th century. P.
And then fans according to your favorite pattern
Then I tied a double ring of regilina sc, then in a crawfish step.

Hat “Little Lady”

diagram and description of the side part

Diagram of the bottom and crown for exhaust gas 49-50 cm.

My yarn

My connected 13 rows of the bottom:

Up to the 13th row inclusive, we knit the same for all sizes.
* * *
ATTENTION:
When knitting a pattern in those places where we stick the hook into the post, it is advisable to use the “deep” sticking method. The hook must be inserted not under the two upper half-loops of the column, but into the body of the column itself. This method will not allow the pattern to shift when we knit with the crown.
* * *
Starting from the 15th row for all sizes we knit according to the pattern. Repeat rows 15-20 two more times.
They differ from the 15-20th only in the last row. Instead of a dc, I knitted a sc.
We also knit rows 33-38 according to the pattern.
38th row - RLS in each column.
The fields start from the 39th row.

We finish with the CROWN and insert the FIRST regelin equal to the circumference of the head. I made one vein. This is where we complete the work of the RLS. Steam.

We knit the BRIMS of the hat.
In the 39th row we make increases in every 3rd column,
In the 45th row - every 4th, in the 51st - every 5th.
The point is that in each row with increases you need to add 56 CH (7 reports). That is, in the 39th 168/56 =3, in the 45th (168+56)/56=4, etc.

STRENGTHENING FIELDS.

After the last row of fields is knitted, they need to be steamed well.
On a horizontal table surface, the fields should have the shape of a flat circle.

We take the SECOND regilin (TWO veins at once) and tie it with RLS. The length of regilin is not measured in advance!!! They just cut off the excess later.
We straighten the fields well.
Let's steam!
We tie the same row of RLS again. And we tie the last row with a “crawfish step” through the post.
On a plane, the fields should still be shaped like a flat circle.
Once again we steam the fields with an iron through a damp cloth!!!.
To add rigidity, I used SALVITOSE, which is used in felting.
Air dried.

DECORATION.
It must be removable - on a pin or button.

Knitting daisies is very easy.
Dial a chain of 2 v. n. In the first of them, knit 8 half-stitches and close them in a circle in the 1st half-stitch.

When the whole chamomile is ready, tie each of its petals in succession with connecting posts. This will allow them to keep their shape and not curl.

For the centers of the daisies, make small pom-poms using a regular dinner fork.

We wind the thread around the teeth of the fork. Then we tie it with an additional thread in the middle, remove it from the fork and tighten the knot. Then fluff and trim. Sew to the center of the daisy.

Two daisies are small, and one is slightly larger. For it, the scheme is the same, only for the petals we dial not 7, but 9 v. P.

I made a decoration on a button clasp for bags.
We will need a button and a knitted circle - this is what the daisies will be sewn on:

In finished form:

We attach the button to the hat

Scheme (for petals only):

Designations: the sketched dots on the diagram are the loop that is on the hook; the numbers in brackets are the number of loops that we pull from the connected column (to make it easier to count loops)

Blind (connecting) loop

I knit from Soso threads (50g=240m) with a regular hook No. 1.5 (without a handle)

Step by step photo process:
1. We knit 6 single crochets into a sliding loop

tighten the thread and close it in a circle.

2. Grabbing only the back half of the loops, we knit 11 single crochets (1 sc in the first half and 2 sc in the subsequent ones), connect them in a circle.

Half loops of a smaller circle will be needed for the upper petals.

3. We knit arches for the lower petals: cast on 5 air loops (c), skip 3 loops of the circle, fasten to the fourth; repeat 2 more times, fasten the last arch into the loop from which the first arch was knitted.

4. We begin to knit the first lower petal: Cast on 4 stitches. p. If you turn the knitting a little, the back (purl) jumpers will be visible

there is one loop on the hook (shaded point in the diagram), we pull out one loop at a time from the purl jumpers (4 sticks), we pull the last one out from under the arch (outermost stick)

there should be 6 loops on the hook

5. Close the row: grab the working thread and knit loops in pairs on the hook (grab the working thread and pull it through 2 loops, grab the working thread and pull it through the next 2 loops). We have the first row (connected column)

6. If you turn the knitting a little, the purl jumpers will be visible,

We knit one in. P.; we pull out the loops from the purl jumpers (1 on the hook + 5 from the jumpers + 1 from under the arch = 7 loops).

We close the row in pairs.

7. Next, we begin to cut the loops. In the sixth row, we begin knitting from a blind loop (insert the hook into the first jumper, grab the working thread and pull it through the loop on the hook). from further jumpers we pull out a loop and the last one from under the arch

We close the row in pairs.

To finish the first lower petal, we knit a blind loop into each purl jumper, and one under the arch

We make one blind loop in the next arch and begin to knit the second lower petal in the same way as the first. After you tie all three arches, it will look like this

To move to the upper petals, make 1 in. p insert the hook into half the loop of the small circle and knit a blind loop

On a small circle you need to tie 3 arches from 4 in. p (2 arches for petals and 1 for the core)

8. Dial 5 v. p and knit the first connection. upper petal column

First upper petal:

Two petals

We tie the upper petals with single crochets (I laid thin wire along the contour to better hold their shape). The lower petals were tied with stbn (without wire). It turned out like this

Sew on beads, maybe small beads, and admire

Starching caps

1. Wash the cap in warm water (30-40 degrees). I use bleach to wash my white hats. washing powder, for colored - powder for colored things.

2. Prepare the starch. To do this, pour 2 tablespoons of starch into a bowl and dilute it with 1/2 cup of cold water (to avoid the formation of lumps). Then pour boiling water, about 1 - 1.5 liters, stirring constantly. The mixture should be thick and transparent. Leave to cool.

3. Thoroughly starch the washed hats, squeeze them out (without twisting), removing excess starch.

4. To dry the hats, I use regular inflatable balloons, after inflating them to the desired size.

5. During the drying process, I periodically give the fields the desired shape, fields openwork hats I iron through a layer of fabric.

MORE HATS AND FLOWERS WITH THEM WITH DIAGRAMS

click on the picture to enlarge