Knitted footwear - practical and useful thing, which can make staying out of the house, on a plane or train, for example, as comfortable as possible. They can also be used at a party or at home instead of slippers. Even novice needlewomen can do the work on two needles if they use diagrams with accessible descriptions.

Do-it-yourself footprints can become a practical gift for friends or relatives, because their use is very wide: as slippers on the plane if there is a long flight ahead, instead of thick socks, so that the feet are warm and do not freeze during a long walk. Another advantage of this product is the minimal weight and dimensions of these slippers; they easily fit into women's handbags.

Experienced needlewomen have come up with more than one way of knitting socks: both with two or four knitting needles, and with five hosiery knitting needles (this method is not much different from knitting ordinary socks), so beginners have plenty to choose from. Knitting tracks with knitting needles is easy if you use step-by-step instructions or patterns for knitting.

Knitting footwear for beginners

For those who are just learning to knit, the easiest way to create tracks is suitable. This method involves stitching parts together. To work, in addition to step-by-step instructions, you will need:

• Yarn (it is advisable to choose wool blend);
• Two knitting needles (the number must correspond to the thickness of the thread);
• A needle with a thick eye;
• Thread of a contrasting color for decorating the marks along the edge.

Before you start knitting the leopards, you need to knit a sample from the selected yarn, 20-25 stitches wide, two dozen rows in garter stitch (knit all the time). Having knitted the sample, we determine how many loops are contained in 10 cm.

It is also necessary to measure the length of the foot. If you are knitting heels as a gift, it is enough to know your foot size, and the length of the foot in centimeters can be taken from a special table:

In order for the footprints to fit snugly and sit well on the leg, it is necessary to make accurate calculations. To do this, take a sheet of A4 paper, cut a strip 10 cm wide, the length of the strip should be equal to the length of the foot. If you are knitting women's slips in size 27, the length is 23.5 cm. We bend the edge of the strip diagonally, measure the remaining part, it should be 13.5 cm. Add the two numbers, we get 37 cm. You can simply calculate it using the formula: (foot length x 2) - 10.

If you count 20 in a 10 cm sample, for 37 cm you will need to count 74. For the traces, we create a 37x10 cm rectangle using garter stitch, the last two rows can be knitted with a contrasting thread. We bend one edge of the rectangle diagonally to form a corner, and bend the remaining part of the rectangle in half.

We sew one of the legs of the corner and the opposite edge of the rectangle. Next we sew the bottom of the tracks. The contrasting edging should be on top. For the product on the second leg, bend the corner in the opposite direction. You can create tracks with knitting needles using yarn of different colors for knitting.

Seamless heels with two knitting needles

If you have already mastered the skills of knitting for beginners, have found a use for such slippers and want to knit a similar model, but more professionally executed, the traditional and most common method will do. It is often described in diagrams and is also suitable for beginners. Step-by-step instructions for performing the work are as follows:

• To do the work on two knitting needles, cast on 30. For the back and side parts of the heel of the heel, you will need 22 rows;
• Next, you need to highlight the central part of the knitting, dividing the number of loops into thirds and in each row decreasing loops from each of the two sides alternately. To do this, in the first row we knit the 19th, 20th and 21st, combining them into one, clinging to the back wall;
• Turn the knitting over. We remove the first loop, knit the next eight, join the 10th and 11th together. Turn the knitting over again and repeat the row;
• When the number of loops on the knitting needles reaches one third of the originally cast on, i.e. the heel of the trace will be completed, you need to cast on loops from the sides for the walls of the trace. We knit one row, then cast on 10 on one side, unroll the knitting, the first 5 according to the pattern of the front stitch, then the garter pattern of the middle part, cast on 10 on the other side;
• In the next row, all the loops are on the pattern; at the end of the row, before the last one, we make a yarn over. Next, we start the row again with the front stitch, purl the first 6, then knit a scarf pattern, purl the last 5 and one increase before the edge stitch;
• In all the following rows we add one at a time, alternately from one side to the other, until there are 40 stitches on the knitting needles;
• On circular knitting needles we close the knitting circle and then continue all the time in a circle so that the traces are without a single seam;
• We continue in the circle the lower part of the trace in garter stitch, the upper part in stockinette stitch, until the product reaches the required length. You can measure the length from the heel with a centimeter or a ruler or calculate the number of rows from the heel, there should be approximately 74 rows in garter stitch;
• Next, we begin to form the toe, knitting the next rows in stockinette stitch with decreases. In each odd row we make two decreases from the top and bottom sides of the work, at the end of the first part we grab 2 together by the front wall. We knit the second part in the same way;
• As soon as the number of sts on the knitting needles reaches 20, we make decreases in each row;
• For the last 4 we do the following: cut off the working thread and pass it through the loops with a needle, tighten it and secure it well from the inside out;
• Having finished knitting, you can crochet the edge with single crochets, half-crochet stitches and decorative crochet stitch. You can find descriptions and master classes of these methods of tying tracks on the Internet.

The tracks on two knitting needles look very neat, they are not difficult to knit even for novice needlewomen. House slippers can be decorated with edging in a contrasting color. You can also use a pattern on the back of the product when knitting, for example, openwork braids, petals or Norwegian pattern.

If you are knitting for a child according to step-by-step instructions and want him to wear such slippers when visiting friends, where he is supposed to active games, it is recommended to cover the tracks with liquid silicone.

The second method of knitting leopards with a relief pattern

For this method For knitting footwear, circular knitting needles are also used.

To make the tracks look bright and original, you can choose three colors that match each other, knit from leftover skeins, or use a gradient transition.

• The number of loops for casting on two circular ones is 53, we use yarn of the same color in two threads. This time, knitting the heel begins not from the heel, but from the sole. In each odd row we make increases;
• In the first row, remove the first loop, knit 8 knit stitches, make a yarn over in a cross way so that no holes are formed, then knit 17, yarn over again, knit stitch, yarn over, knit 17, yarn over, knit 8, purl the last one. We knit the second row with knit stitches to make a shawl pattern, we knit yarn overs behind the front wall;
• We knit each odd row like the first, each time increasing the number of loops in the middle part, we make increases in the third row after the 18th, in the fourth after 19, in the central part the number of loops with each row increases by two, in the third - 3, in the fifth – 5, etc. In total, you need to knit 6 rows with increases, the number of loops thus increases to 75. Next, you need to knit four more rows of the sole without increases;
• Change one of the threads to a different color. In the seventeenth row we knit the first 14, make a yarn over and go to the pattern, purl two, knit three, knit 45, yarn over, knit the remaining loops;
• We knit all even rows according to the pattern, so that there is an elastic band in the central part, and a stockinette stitch along the edges. We start the nineteenth row with knit 15, yarn over and continue the row by analogy with the first row of this part (seventeenth);
• In total, you need to knit 16 rows with two increases in each even number. As a result, the needles should be 91;
• In the 33rd row we change the second thread to a different color. We knit the first 22, then we knit two purls into one. We also knit the three knit stitches into one; to do this, we transfer the central one to the right knitting needle, we knit the two outer ones together, and we pass the loop from the right knitting needle through the knitted one. In this way we knit the entire part of the elastic band. Last 22 by pattern;
• We knit the 34th row according to the pattern. In the 35th row we knit the first 22, close the central 19, knit the remaining 22. In the 36th row we knit with a 1x1 elastic band, attach the second part. We continue to knit 8 rows with an elastic band. Close the knitting;
• Next, you need to sew the product along the line of the back wall and the sole from the wrong side, turn it onto the face and straighten it. The trail is ready. We knit the second one by analogy.

IN winter time years, many women start doing this interesting activity like knitting. To protect themselves from the effects of cold weather, they make various scarves, sweaters, vests and even footwear.

Footprints are simply an irreplaceable thing in cold weather, since you can move around the house in them without worrying about your feet freezing, and besides, they act as a pretty original gift. Knitting slips will not be difficult even for beginner knitters; you just need to familiarize yourself with a few master classes.

Selection of materials

When choosing threads for knitting leotards, it is recommended to choose a material containing wool. There is a group of threads that are 100% wool, but they are quite expensive and purchasing such material for trails would not be entirely logical.

If knitting leopards is done in the autumn or spring time, then it is recommended to opt for cotton threads, since it will not be so hot to walk in socks made of such material.

It is possible to knit leopards on two or four needles, their sizes should be small, ideal options would be No. 2.5 and No. 3.

Knitting with two knitting needles

When knitting leopards on two knitting needles, the sizes of which will be 37-38, it is recommended to opt for wool blend or synthetic threads of medium thickness. Take a pair of needles No. 3. You can use threads of the same color or combine several shades.

• 30 loops are cast on the knitting needle;
• the first row is knitted using only knit stitches;
• the second row is knitted using only purl stitches;
• the presented actions are repeated up to 14-16 rows;
• We begin to form the heel.

Footprints for children without seam

There are many in various ways knitting leopards with knitting needles, but in the case of a child, the most relevant would be to use a seamless knitting method.

In this case, you need to follow this plan:

Natural threads are selected, knitting needles of size No. 3 or No. 4 are taken. 36 loops are cast on, during the work they are divided into three parts: 12 loops are knitted, 1 purl, 10 knit, 1 purl, 12 knit. Thus, about 14-15 centimeters are knitted.

Another 10 centimeters of work is knitted with an elastic pattern - 1 front loop alternates with 1 purl.

The number of loops is reduced by half. To do this, on the front side of the pattern, two loops are knitted as one, the purl row is knitted in the same way as it was knitted. The steps are repeated again, after which the thread is tightened in the loop.

Using the remaining threads, you need to tighten the trace; in this case, it is recommended to use a hook.

If the knitter has a sufficient level of skill, then when creating footprints you can use absolutely different patterns: braids, alternating several patterns.

Creating seamless tracks with bumps

In this case, to create the marks you will need threads consisting of 49% wool and 51% acrylic. You need to select them on the basis that 100 grams of skein contains 240 meters of thread.

Regarding the knitting needles, here you should give preference to those on fishing line, No. 3.5 or No. 4. In addition, you will need 4 pieces of sock knitting needles and an additional knitting needle for knitting braids. To carry out tying, you should stock up on a hook.

Knitting should start from the heel. Initially, 12 loops are cast on two knitting needles, after which the formation of the pattern begins (alternately 1 knit stitch, and then 1 purl loop). Thus, 22 rows are knitted. After this, using a toe knitting needle, you need to knit another row.

Further actions must be performed strictly following the description in the video.

Before you start knitting the presented socks, you need to study in detail on the Internet various photos knitted leopards, having selected the option you like best, you can begin to familiarize yourself with the knitting pattern.

At this stage of time, there are numerous videos on the Internet where the knitting process is presented step by step, so even a novice knitter can easily create her first stitches.

Photo of the process of knitting footwear with knitting needles

Knitted footwear is a cross between indoor slippers and knitted socks. They can be worn as house shoes, or they can be slipped into boots during the cold season. For beginner knitters who are not yet able to knit complex things, knitting ordinary leopards using knitting needles will not pose any difficulties. We will consider using both 2 and 5 knitting needles. Such products are knitted quite quickly and simply, very little yarn is required, but stocking and garter knitting are most often used as patterns.

In this article you will find models, descriptions and diagrams, as well as a full detailed video tutorial. Choose the method that you like and create with us. And if you want to knit a simpler one, try it - a warm alternative to slippers and slippers.

You can also crochet socks! Read the article - it's quick and easy!

How to knit regular sleds without seams on 5 knitting needles

This master class is for beginner knitters. He tells and gives photos with descriptions of how to knit seamless heels.

For work you will need half-woolen yarn (100g/100m) - 100 g, stocking needles No. 4 - 5 pcs.

Make a set of loops on two knitting needles at the same time, casting 10 loops on each, twist the ends of the threads, and knit 2 circular rows of faces. loops.

Next you need to make additions on the sides. To do this, at the beginning of knitting loops from the knitting needle, pick up the loop of the previous row with the right knitting needle, put it on the knitting needle and knit together with all the loops. At the end of the row, with the freed left knitting needle, pick up 1 more loop of the previous row and also knit it. Repeat these additions again for the other side. Knit the next row without increments.

Thus, alternate the row with increases and the row without increases until the toe reaches the required width of the foot.

We continue to knit seamless heels without additions until the top of the instep. At this stage, you should divide the knitting in the center as follows: knitting to the central part of the *face. row, knit the last 2 stitches, then turn the work, remove the 1st stitch (thread before work) and knit purl. row - purl. loops, knit the last 2 stitches together. Turn the work again, remove the 1st stitch (thread behind the work) and knit knits. row, repeating from* 3-4 more times. This is where you make decreases from the center of the product.

Continue knitting without decreasing straight blade to the middle of the heel. Divide all the loops into 3 parts and knit the classic heel upward. To do this, in purl. row knit purl. loops of the 1st part and the middle one, and *knit the last loop of the 2nd part together with the 1st stitch of the 3rd part - purl. Turn the work, remove the 1st stitch (thread behind the work), knit the loops of the middle part of the faces. and knit the last stitch together. with a slant to the left from the 1st stitch from the next knitting needle (remove the last loop, knit the 1st stitch from the next knitting needle and pull the knitted one through the removed one). Turn the work again, remove the 1st stitch (thread before work) and repeat from * until all the loops are removed from the edge needles. Cast off the remaining stitches on the middle knitting needle and that’s it - the trail on 5 knitting needles is ready.

And for a set you can knit it in a related or identical color.

Traces on 2 knitting needles with detailed description and photo

You can knit these elegant footwear in literally a couple of hours on 2 knitting needles for yourself or as a gift to your family or friends. Bright multi-colored pompoms make this footprint model fun, gentle and cute.

For work you will need yarn - 100 g, stocking needles.

Step-by-step master class for beginner needlewomen

1. Cast on 56 stitches on the needles. When knitting each row, always remove the 1st loop, and purl the last loop.
2. 1st row: knit 27, yo, knit 2, yo, knit 27.
3. Row 2: purl all stitches.
4. Row 3: K28, yarn over, k2. , yarn over, 28 persons.
5. Row 4: purl all stitches.
6. Knit another 10 rows in this way. In the middle of each face. make additions in a row: yarn over, knit 2, yarn over.
7. Row 15: Knit. loops without making additions.
8. Row 16: purl all stitches.
9. Row 17: Knit. loops, not reaching the center of 7 loops.
10. Sole: 1 row (middle 14 p.) Knit as follows: remove 1 p., 12 knits, 2 p. together (1 p. central + 1 p. from the side). Expand the work.
11. 2nd row: remove 1 p., knit 12, 2 p. together (1 p. central + 1 p. from the other side). Expand the work.
12. Continue working the sole, gradually decreasing the loops from the sides. There should be 14 stitches left on the needles.
13. Back part of the trace: knit 14 stitches remaining on the knitting needle straight for 16 rows in garter stitch. Finish knitting.
14. Sew the back part to the sides of the footprint. Decorate the edges with a crochet stitch. Decorate the product with pompoms or knitted appliques.

Very good step by step video from Liliya Ulanova, we recommend viewing.

You can knit it in the same way - this is a warm, comfortable and cozy thing for women and girls of all ages!

We make an original product in Norwegian quickly and easily

For experienced craftswomen, we present a model of original and beautiful footwear, made with knitting needles using Norwegian patterns.

Product size: 36-39. For work you will need: 50 g of white yarn and 50 g of gray wool yarn, a set of needles No. 3.5 and hook No. 3.

Facial surface: faces. R. knit faces p., out. R. - purl p. In circular rows, knit only faces. loops.

Norwegian pattern A: knit faces. satin stitch according to scheme No. 1. In purl. rows, knit all the loops according to the pattern. To prevent holes from appearing in the knitted fabric, place yarn overs on the back. side knit crossed purl loop. Always perform edging with both threads at once. To form the heel, perform 1 time from the 1st to the 44th row, and then repeat from the 41st to the 44th row, but without adding.

Norwegian pattern B: knit in the same way as Norwegian pattern A, but according to pattern No. 2. Perform 1 time from the 1st to the 33rd r.

Knitting density, Norwegian pattern: 23 loops and 23 rows = 10x10cm.

Step-by-step master class with the study of stages

To knit the heel on stocking needles, cast on 31 stitches with gray thread and knit 1 purl. R. purl loops. Next, pull a loop through the chain of edge loops. To the 29 stitches remaining on the needles to form the upper part of the slippers, cast on another 31 stitches with thread gray. On these 60 loops, knit in circular rows. At the same time, continue to knit pattern A on the 29 loops of the sole of the product.

The upper part should be made with pattern B. When decreasing the loops on the upper part, you also need to decrease the loops of the sole in parallel: on the 3rd, 4th sts of the sole, knit a broaching loop (the loop is removed as a knit and pulled through the previously removed loop); From the end, knit the 4th and 3rd loops together with the front one. From the beginning of work, mark the 33rd row from the top and start knitting 2 loops at a time from there. Pull off the loops that remain on the knitting needle. Execute side seams on the heel. Crochet the edge of the product 3 times. Art. b/n. thread of any color. Or use a more “advanced” binding style, read the link for more details - it’s not as difficult as it seems!

Video tutorial for beginners

When preparing for winter, don’t forget to knit warm and comfortable socks for yourself and all your household members. Our video lesson for beginners with diagrams and descriptions will help you in this lesson.

Inspiration, strength and desire to create!

Comfortable indoor slippers. Photo + diagram.

Soft two-color slippers knitted with knitting needles.

There are many options for making soft and comfortable knitted shoes.

The slippers are knitted from the middle of the sole in garter stitch; for the upper part a two-color “lazy” pattern of re-cast stitches is used. Consumption of wool yarn 150m/100g in two colors is about 100g, knitting needles 3.0.

To get started, cast on 51 stitches with brown thread and knit 2 rows with knit stitches. Mark the middle loop, in the 3rd, 5th, 7th and 9th rows make increases with a knitted cross from the broach: after edge loop, before the middle loop, after the middle loop, before the edge loop, 4 increases in a row, 4 loops x 4 rows = 16 added loops, there are 67 loops on the knitting needles after the 9th row, this is a slipper sole. Then knit 2 rows of white thread and 2 rows of brown thread on these loops ( garter stitch- all loops are front). Continue working with white thread, slipping every 3rd brown loop 10 times, then 7 white loops, then slipping every 3rd brown loop another 10 times, 2 white loops next to the edge ones, 7 white loops in the middle. In the next white row (all stitches are knit), re-slip all the brown loops, knit 7 middle loops together, there are 61 loops in the row. Next 2 rows with brown threads, garter stitch on 61 loops. In the next two white rows, repeat the pattern 9 times and decrease on the middle stitches, then 2 brown rows. Repeat 4 rows (2 white with pattern and decreases and 2 brown) 3 more times, 37 stitches will remain on the needles.

Finish knitting with 2 rows of white thread and 8 rows of brown. Close the loops, break the thread and sew it with a tail, first the vertical edges of the fabric (1), and then the outsole (2), connecting the two halves of the 1st row.

For your size and your thread thickness, the number of stitches in the cast-on row can be less/more, the total number of rows should also correspond to the size, increases on the outsole (4 loops in every 2nd row) and decreases in the upper part (7 together in each 4th row).

When cold weather sets in, many housewives try to knit socks, slippers or footwear with their own hands instead of store-bought slippers. They are made from different yarns, colored, plain, for adults or for children.

Let's look at how the tracks are knitted on two knitting needles, the simple method of which will not be difficult.

Knitting leopards on two knitting needles without a seam for beginners:

1. Work begins with casting on a certain number of loops, depending on the size of the knitted slippers. For adults, there are usually 50 to 60 pieces. Their number must always be odd.
2. Next you need to start knitting the top, for this we knit about 10-15 rows with an elastic band, then distribute the loops onto 2 knitting needles, leaving one in the center, then knit with garter stitch.
3. First, one half is knitted, a yarn over is made, then the central one is knitted, then a yarn over is knitted, then the second half is knitted to the end. This is how the required depth of the trace is knitted.
4. Now you need to distribute the work into 3 parts, separating 10-15 pieces in the middle. They will serve for the sole.
5. Next, half is knitted, then the middle loops, leaving the last one. It should be knitted with the first loop of the second half. Then turn the work over and knit in the same way.
6. Work continues until the number of average loops is 10-15.
7. The remaining loops are knitted in several rows, ending with the first one on the side.

Knitting socks for beginners is best done from thick yarn so that they have a shape and are comfortable to wear.

To help beginners when performing knitted socks, there are useful recommendations:

1. To better keep knitted slippers on your feet, you can sew straps on the sides.
2. You can knit the soles with a pattern, which will make them warmer and massage your feet when walking.
3. To prevent the edge of the trail from stretching, you can crochet it.
4. For longer wear, homemade knitted slippers can be made from double or triple thread, or add a stronger thread.

You can quickly knit women's slippers by looking at knitting lessons on the Internet. There are a lot of knitting options, they can be knitted with simple garter stitch, you can knit an ornament, or you can make them fashionable by decorating them with beads or other decorations.

If you need to knit short socks, you need to knit only 1 row of elastic, then start knitting the heel. Each family member, if desired, can knit any version of knitted slippers they like.

To work you will need approximately 250 grams of any thread, knitting needles the right size. 30 stitches are cast on the knitting needles.

Step-by-step instructions for knitting women's leotards:

Repeat rows 87 and 88 until the required number of loops is 9, they need to be started. As a result of effort and diligence, you get beautiful, warm woolen slippers.

Footprints for men

There are not only women's shoes, but also men's ones, which can replace indoor slippers. Such original tracks are completed quickly, in one day. This needlework is interesting and will always bring pleasure, since in winter, indoor shoes are always necessary.

To be healthy, you should keep your feet warm.

Let's consider detailed description male footprints knitted on two knitting needles.

Knitting begins with the sole, its length is 25 cm. 26 loops are cast on.

1. 1st row: knit stitches are knitted, adding one at the beginning and at the end. The total is 28 pieces.
2. In the second, all the loops are knitted as in the first.
3. From 3-16 they are knitted as 1 - 2 rows. There should be 42 loops in total.
4. 17. Knit all the loops in garter stitch, 2 at the beginning and at the end. 40 loops are formed.
5. 18 all facial loops.
6. Rows 19-32 are repeated as 17, 18. 26 loops remain.

Knitting for children

Young children should keep their feet warm at all times. To do this, you don’t have to buy warm socks or slippers in the store; there are ways to knit footwear for kids at home.

Let's look at the step-by-step process of knitting simple children's slippers on two knitting needles. First you need to decide on the size. To do this, you need to measure the child’s leg and double it. If the length of the leg is 22 cm, then 32 loops are cast on the knitting needles, always an even number.

1. Row 1 is knitted with an elastic band. 1 knit stitch, 2 purl stitches.
2. Knit 14 loops with an elastic band, then yarn over, knit, yarn over, two knit stitches, yarn over, knit, yarn over, and the remaining 14 with an elastic band.
3. In the center there are 9 loops, which consist of knit stitches and yarn overs, and there is an elastic band on the sides.
4. The 3rd row is knitted according to the pattern, the middle 9 are knitted purlwise.
5. Next we knit 14 loops with an elastic band, 3 knit stitches, yarn over, 2 knit stitches, yarn over and the remaining ones we knit with an elastic band.
6. Row 5 is repeated like 3.
7. From 6 to 11 rows are repeated similarly to 5-7.
8. 12-13-14 rows are knitted in garter stitch.
9. In the 15th row there are 44 loops. You need to knit 22, then 2 more, and knit the next two together and turn your work over.
10. At 16, 4 loops are knitted, 5 and 6 together, turn the knitting over.
11. Continue knitting like this until you get 5 loops.
12. Next we knit these 5 loops, add 1 on the side, and turn the work over. In the same way on the other side. This continues until the heel closes.

After all the threads are hidden, the seamless footprints for the child are ready.

Useful video

Related Posts