Double winter hat

Competition work No. 38 - Double winter hat (competition conditions)

The double winter hat is knitted according to the description from the Country of Mothers website. Description of the cap

The hat is knitted.

For knitting I used NAKO bambino threads (25% wool and 75% acrylic, 50 grams/130 meters) in 2 colors - white (top of the cap) and pink (inner cap). Knitting needles No. 2.5, yarn consumption per hat is less than 100 g.

Description and diagram

I started with ears, with one shell, in the next repeat there were increases along the edges, shells from 3 loops, the third repeat of 3 full shells. After the ears I added loops to the forehead and back of the head. The pattern was knitted with straight knitting, 4 repeats without decreases, the 5th of five loops - four, the sixth of 4 - three loops, then two together and pulled together. Rows 6-7 and 12-13 were knitted with pink threads. Around the hat I cast on loops on circular needles and knitted several rows using pink thread. The result is a roll. I made a pompom from threads of two colors and sewed it to the hat. The ties are knitted with purl stitch for 3 rows, which also produces a roll. The inner cap is knitted from pink threads using stockinette stitch and sewn to the outer cap.

Hat for a girl. Knitting needles.

I suggest learning how to knit children's openwork double cap:
This model is suitable for ages 1.5-2 years.
Used: ALIZE 100% wool yarn, knitting needles No. 2.5, hook No. 2.5, knitting needle.
Beginning - Italian set on one knitting needle - 194p.

2.

We continue with a double elastic band (hollow inside) for 20 rows (it turns out 10 rows in the inner and outer fabric).
Now you need to connect the double elastic band into one fabric, we do it this way: 1 edge. , knit the front loop of the outer fabric with the purl loop of the inner fabric together with one front loop, and so on for all subsequent loops., 1 chrome stitch. As a result, we are left with a single blade of 96+2 chrome on the knitting needle. loops
Then row 1 - knit stitches.

3.

2nd row - purl loops
We begin to knit the 3rd row according to the pattern, only in this row we make yarn overs, but do not decrease the loops, it turns out that we add 48 loops with yarn overs = 146 loops of the fabric (144 = 8 repeats from the pattern + 2 edges) repeat = 18 loops.
Then we knit everything according to the pattern, purl rows, loops according to the pattern, yarn overs, purl stitches.
At a height of 15 cm from the elastic band, we begin to decrease the loops for the top. We continue to knit according to the pattern, only now we decrease the loops and do not make yarn overs. And in the middle of the repeat, where the sections of the facial loops are, we knit 3 stitches together. The top turns out to be a beautiful flower.

4.

5.

Upper openwork hat finished.
Let's start working on the inner cap.
By inside product, along the upper edge of the double elastic band we cast on 98 loops on the knitting needle. Next we knit in stockinette stitch - front side - knit stitches, wrong side - purl stitches. At a height of 13 cm from the elastic, we divide the fabric into 6 equal parts (6 x 16 loops = 96 + 2 stitches), knit the middle of each sixth part in 2 stitches. knit stitch together, after one row we knit the same centers 3 stitches each. knit stitch together and so on until the loops are completely decreased, there are 8 loops left on the knitting needle - we collect them with a needle and secure the top with a thread.

6.

Let's start making a bubo: Cut out two circles with a diameter of 10 cm from thick cardboard, cut out a hole with a diameter of 3 cm inside each circle, put both resulting rings together and wrap them with thread so that the inner hole is completely filled. Then we cut the threads around the circumference so that the cardboard rings become visible. We move the rings apart a little so that we can secure the threads with a lace (we crochet a braid or a thread in two folds), tie them securely with two knots. Carefully remove the rings. Shake the bubo to straighten the threads and adjust the shape with scissors. We fix the bubo on the top cap. That's it - the product is ready! I wish you creative success! Author Julia.

knitted hat for girls

Size 51-52
Kandy threads (Vita), 100% wool, knitting density 10 cm X 22 sts, 10 cm X 32 rows, about 200 grams without pompom, stocking needles No. 3.

Pattern 1:




Pattern 2:
* Knit 2 stitches together, yarn over* repeat from *


On knitting needles No. 3, cast on 112 stitches with an additional thread of a contrasting color, distribute the knitting onto 4 knitting needles, 28 stitches on each. After this, use the main thread to knit the inner cap with a 2x2 elastic band. At a height of 3 cm, knit a row with pattern 2, leaving holes for the ears in this way: knit 16 loops with pattern 2, then close 16 loops with an additional thread, turn the knitting and cast on 16 loops with an additional thread, then knit the cast-on loops with the main thread and continue pattern 2 another 48 loops to the second eye. Make a hole for the second eye and continue knitting pattern 2 on the remaining 16 loops.
Next, we knit the outer elastic band 2x2, at a height of 3 cm. We move on to pattern 1, simultaneously adding one loop from every 7th loop. This makes 128 loops. At a height of 10 cm of pattern 1, we begin decreasing. Decrease evenly, 2 stitches on one needle every other row. To prevent the decrease from being noticeable, we knit 2 loops together with purl loops, alternating “before the braid” and “after the braid.” After there are 2 purl loops left between the braids, decrease the loops on the braids evenly, leaving a total of 4 loops in the braid. Pull off the remaining loops.
After completing the top hat, knit the ears. Remove the extra thread, distribute the stitches onto 4 knitting needles, 8 stitches per knitting needle. At a height of 5 cm, start decreasing on the sides, like mittens. On the remaining 4 loops, knit ties, on 2-stocking needles, with knit stitches, without turning the knitting.
After the ears, we remove the additional cast-on thread, distribute the stitches onto 4 knitting needles, 28 stitches on each, and knit the inner cap using stockinette stitch. Considering that pattern No. 1 of the upper cap tightens the knitting, there is no need to add loops on the inner cap. Knit 10 cm in stockinette stitch, divide the knitting into 8 parts and start decreasing in each part. It should be taken into account that the width of the inner cap is 16 stitches smaller, so you need to decrease not every row, but less often, constantly comparing the inner cap and the outer one. At the end of the inner cap, pull off the remaining loops.
Make and sew a pompom

KNITTING: MODEL OF A HAT WITH EARS WITH A PATTERN OF LARGE BRAIDS

Knitted hat for a girl: model of a hat with ears with a pattern of large braids

In cold weather autumn days You can’t do without a cozy warm hat.

Delight your baby with a bright knitted new thing, especially since even a novice needlewoman can easily master this model.

For this you will need 2.5 knitting needles, 2.5 and 3.5 circular knitting needles and some yarn (about 75 grams - that's a little less than one skein).

When choosing yarn, you should pay attention to the composition; it should not prick and at the same time be warm and comfortable to wear.

The pom pom is made from leftover yarn, but you can use a fur pom pom instead, which is very fashionable this season. Detailed description For models and knitting patterns, see below.

KNEWS WITH BRAIDS I HEART CABLES

Children's hat knitted with braids I heart cables

Hats with braids are relevant not only in women's fashion, but also among little fashionistas and fashionistas, and the braid pattern looks equally beautiful on both girls and boys.

We invite you to knit a baby hat with knitting needles that are universal and very beautiful style, which is suitable for both a boy and a girl.

The knitted children's hat is presented in two versions: with ears with ties and the usual classic shape.

So we buy yarn, everything needed to knit this pattern according to the list, and off we go!

Let your kids be the most fashionable this winter!

Children's hat knitting patterns and description:

Children's hat knitted with a pattern of curls

A cute knitted hat with an unusual pattern will become a real decoration for a little princess’s winter wardrobe.

Select yarn in subtle shades of pink and lilac so that the swirl pattern is clearly visible, and start knitting!

In such a hat you can walk with your child for a long time and the ears will always remain closed.

Knitted hat for children: diagram and description

KNITTING: HAT MODEL WITH SPIRAL BRAIDS

Looking at the model of this hat, it’s simply impossible not to fall in love with it!

No matter how you look at it, she is simply perfect!

The white color and spiral braids make this hat simply adorable, and thanks to the soft yarn, your baby will always be warm and comfortable in this hat.

Knitting children's hats is always a pleasant activity for every mother, and we wish you patience and inspiration! Let's look at the description of knitting a hat and get to work.

source

Knitted hat with ears

A warm and elegant hat, and most importantly it covers the ears - an ideal option for your child.

Cap size for head circumference 55 cm.

Description of knitting a hat

Hat for girls “funny pom-poms” knitted

Every day it is slowly but steadily getting colder, it’s time to think about knitting such a cute hat for your daughter that will reliably warm her ears from the frost.
To make it we will need (head circumference 52-54): pink trinity yarn (135m/50g) - about 200 grams, however, you can choose the desired color at your discretion; knitting needles No. 3 and No. 2.5 - for ears and elastic; a few beads.
Description of work
Outer part of the hat: cast on 122 stitches on knitting needles (120p - pattern, 2p - edge stitches)
1 r: edge, * 4 LP, 7 IP, 1 LP, 6 IP, 1 LP, 7 IP, 4 LP *, repeat from * to * 4 times, edge.
2p: according to the drawing.
3p: edge, *4 LP, 3 IP, 2 knit together with a tilt to the right, 5 LP, yarn over, 2 LP, yarn over, 5 LP, 2 knit together with a tilt to the left, 3 IP, 4 LP *, repeat from * to * 4 times, edge.
4 p: according to the drawing.
5p: edge, * 4 LP, 2 IP, 2 knit together with a tilt to the right, 5 LP, yo, 4 LP, yo, 5 LP, 2 knit together with a tilt to the left, 2IP, 4 LP * repeat from * to * 4 times , edge
6p: according to the drawing.
7p: edge, * 4 LP, 1 IP, 2 knit together with a tilt to the right, 5 LP, yarn over, 6 LP, yarn over, 5 LP, 2 knit together with a tilt to the left, 1 PI, 4 LP *, repeat from * to * 4 times, edge.
8p: according to the drawing.
9p: edge, *3 LP, remove 4 loops on the right knitting needle, remove 3 loops on an additional knitting needle before work, transfer 3 LP from the right side to the left and one on an additional knitting needle, knit two knit stitches together with a tilt to the right and the remaining loops with an additional knitting needles, knit 3 from the main needle, yo, 8 LP, yo, slip 3 stitches onto an additional needle before work, knit 3 stitches from the main needle, knit 2 from an additional needle, slip the remaining stitch on left knitting needle, we knit two knit stitches together with a slant to the left, 4 knit stitches * repeat from * to * 4 times, edge stitch.
10 r: edge, * 4 IP, 6 LP, 10 IP, 6 LP, 4 IP * repeat from * to * 4 times, edge.
11 r: edge, * 3 IP, 1 LP, remove 3 loops on an additional knitting needle before work, knit 3 purl loops from the main knitting needle, 3 purl loops from an additional knitting needle, 1 IP, 8 LP, 1 IP, remove 3 loops on the right knitting needle , remove 3 loops on an additional knitting needle before work, return 3 loops from the right knitting needle to the left and knit them purlwise, 3 purl loops from an additional knitting needle, 1 LP, 3 IP* repeat from * to * 4 times, edge stitch.
12 r: according to the drawing.
13 r: edge, * 1 LP, yarn over, 5 LP, 2 knit stitch together with a tilt to the left, 3 IP, 8 LP, 3 IP, 2 knit stitch together with a tilt to the right, 5 LP, yarn over, 1 LP* repeat from * to * 4 times, edge.
14 r: according to the drawing.
15 r: edge, 2 PL, yarn over, 5 PL, 2 knit stitch together with a tilt to the left, 2 IP, 8 PL, 2 PI, 2 knit stitch together with a tilt to the right, 5 PL, yarn over, 2 PL* repeat from * to * 4 times, edge.
16 r: according to the drawing.
17 r: edge, *3 LP, yarn over, 5 LP, 2 knit stitch together with a tilt to the left, 1 IP, 8 LP, 1 IP, 2 knit stitch together with a tilt to the right, 5 LP, yarn over, 3 LP* repeat from * to * 4 times, edge.
18 r: according to the drawing.
19 r: edge, * 4 LP, yarn over, remove 3 loops on an additional needle before work, knit 3 knit stitches from the main knitting needle, 2 knit stitches from an additional knitting needle, remove the remaining loop on the left knitting needle, knit 2 knit stitches together tilting to the left, 8 LP , slip 4 loops onto the right knitting needle, slip 3 loops onto an additional knitting needle before work, transfer 3 knit stitches from the right knitting needle to the left and 1 to an additional knitting needle, knit 2 knit stitches together with a slant to the right and knit the remaining loops from the additional knitting needle, 3 knit stitches with main, yarn over, 4 LP* repeat from * to * 4 times, edge stitch.
20 r: edge * 5 IP, 6 LP, 8 IP, 6 LP, 5 IP * repeat from * to * 4 times, edge.
21 r: edge * 4 LP, 1 IP, 3 loops remove on right side knitting needles, remove 3 loops on an additional knitting needle before work, return 3 loops from the right knitting needle to the left and knit from purl, 3 purl loops from an additional knitting needle, 1 LP, 6 IP, 1 LP, slip 3 loops on an additional knitting needle before work, knit 3 purl loops from the main knitting needle, 3 purl loops from the additional knitting needle, 1 IP, 4 RL *, repeat from * to * 4 times, edge stitch.
22 r: knit according to the pattern.
From 23 to 42 rows: repeat rows 3 to 22.
From 43 to 58 rows: repeat rows 3 to 18.
59 r: edging, * 4 LP, yarn over, 5 LP, two knit stitches together with a tilt to the left, 8 LP, 2 knit stitches together with a slant to the right, 5 PL, yarn over, 4 PL * repeat from * to * 4 times, edging.
60r: knit according to the pattern.
Rows 61 and 62: repeat rows 1 and 2.
Next, we switch to knitting needles No. 2.5 and knit another 16 rows with an elastic band (2x2), and then close the loops with knit stitches on the front side using an elastic band (1x1).
Inner part of the cap: along the wrong side of the closed edge outside We cast on the hats along the ribs on knitting needles No. 2.5 121 loops and knit them with an elastic band in the reverse order. That is, 2 rows with a 1x1 rib and 16 rows with a 2x2 rib, then we switch to needles No. 3 and knit 24 rows with stockinette stitch, while in the first row we evenly decrease 8 loops.
Next we knit tightening rows: edge row, 3 knit rows together to the end of the row, 1 edge row. Reverse row - we knit all the purl stitches like this two more times, and tighten the remaining loops.
Assembly: sew the hat along the entire length, turn the inside inside out and fasten the top edge of the elastic of both parts of the hat. And, for a more reliable fixation of the layers of the hat, we fasten them by sewing beads. We tighten the crown of the upper part.
Ears - ties: at a distance of 12 loops from the middle seam, we cast on 24 loops on the wrong side of the hat (under the braid of the closed edge) with knitting needles No. 2.5 and knit 14 rows with a 2x2 elastic band. Close 1 loop on each side of the eyelet 2 times. Next, we knit another 25 cm on the remaining loops. Two tightening rows and close the loops.
We knit the second ear symmetrically.
Next, you need to make 6 pompons and two flagella about 20 cm long. At the same time, we attach two pompoms to the ends of the ear ties, and attach the remaining four to the flagella and sew them to the top of the hat.
The hat is ready and your child will feel warm and cozy even in severe frosts.

Diagram and symbols.

Original post and comments at

You can knit a hat for a little girl using knitting needles with your own hands. There are a large number of schemes of varying complexity. Each needlewoman can choose a pattern suitable for her skill level.

To make a product, you need to select yarn and purchase knitting needles that match it. All this is available in specialized stores. There are patterns for knitting hats on 2 and 5 knitting needles. Before purchasing materials, you need to study the instructions; they usually indicate the number of working knitting needles and the type of yarn.

The patterns are designed for a certain thread thickness. If you take thinner or too thick yarn, the product will turn out to be a different size.

Yarn selection

Threads for knitting a hat are selected depending on its purpose. The summer headdress is woven from cotton iris and linen. For winter hat you will need wool or its synthetic analogues. Manufacturers indicate the composition of the yarn on the packaging.

A children's product can be knitted from the following types of threads:

• Wool yarn. Suitable for making warm clothes. Natural wool is very warm, looks beautiful, but quickly loses its shape and appearance. The most expensive types wool yarn angora, cashmere, mohair, alpaca.

• Blended yarn. Wool with the addition of acrylic retains best qualities natural fiber, and synthetics give it wear resistance.
• Acrylic. Synthetic fiber is almost never used in its pure form. Blended types of yarn are made from it. Products containing more than 50% acrylic do not absorb moisture well, become highly electrified, and look cheap.
• Linen, silk, cotton. Threads made from natural fibers are suitable for making summer clothing. They have good hygroscopicity and do not cause allergic reactions.
• Bamboo. Threads made from this fiber have antimicrobial properties. The yarn does not cause allergies. Things made from bamboo do not deform and absorb moisture well.

The choice of yarn quality and color depends on the design of the product. For a multi-color hat consisting of identical segments, you will have to purchase several skeins of thread. The remaining yarn will make a scarf and gloves. If the pattern is created by changing threads, take yarn of the same type with the same thickness, but different colors.

This is the only way to obtain a product with the same fabric density. Downy items are often knitted in two threads, one of thin cotton and the other of animal underfur.

Calculation of the amount of yarn

The knitting pattern usually comes with detailed instructions. Often magazines publish only a drawing and an image of a hat for girls. In such cases, you will have to do the calculation of the amount of thread yourself. To do this, you need to knit a small sample according to the pattern from the manual.

Each package contains two numbers separated by a fraction, for example 15/6, 32/2. The first number before the line indicates the volume of yarn. The second number indicates the number of strands that make up the thread. Bulky yarn with a small number of twists consumes less.

1. Make a drawing of the finished product, observing the actual dimensions;
2. Choose yarn in the store;
3. Write down the data from the skein packaging;
4. From a thread with the same volume and number of twists, knit a sample of 10 cm by 10 cm;
5. Count the number of loops in the first row;
6. Unravel the knitting and measure the length of the used thread;
7. The area of ​​the finished product is calculated according to the drawing, then divided by 10 square meters. cm.;
8. the result obtained is multiplied by the amount spent on the thread sample;
9. The yardage is checked against the data on the yarn label.

If there are 200 m of thread in one skein, and 350 m are required to make the product, then you need to buy two packages. The greatest expense is for products knitted with braids.

The least number of threads is spent on openwork designs. Any knitted item after washing it loses up to 10% in volume, so it is recommended to take more yarn than indicated in the recommendation. It should be taken into account that natural wool shrinks if it is wetted in hot water.

Important. Yarn that has been decated a second time will not shrink after the product is ready.

Before you start working with any wool, you need to soak it in warm water.

Knitting needle selection

The density of a knitted fabric depends on the thickness of the yarn and knitting needles. The manuals included with the diagrams indicate the dimensions of materials and tools. For craftswomen who knit tight stitches, it is better to take knitting needles one number thicker than the recommended ones.

An approximate table for selecting knitting needles depending on the thickness of the yarn:

Length of thread in a 100 gram skein	Spoke thickness in millimeters
50 m or less	9; 10; 11; 12; 13; 14; 15
100 m	6; 7; 8
150 m	5; 6
200 m	4; 5
300 m	4, 5; 3
400 m	2; 3, 5
500-800 m	1, 5; 2; 2, 5; 3

Knitting needles differ in their purpose, they are:

• circular;
• stockings;
• straight;
• elongated.

For knitting hats, you usually use circular or stocking needles. The fishing line and the working part of the tool differ not only in thickness, but also in length. For knitting a small baby hat, circular knitting needles with fishing line up to 50 cm are suitable.

Knitting tools are made of metal, bone, wood, and plastic. On metal spokes smooth surface, woolen threads glide over them well. A wooden instrument weighs less and can be taken with you on a trip.

Patterns and step-by-step descriptions of knitting hats for girls

Knitted hats for girls (pattern patterns that differ great variety, before starting work, you should carefully study) it is better to knit simple ones that do not require much time to make. A novice craftswoman should not take on the production of a product of increased complexity. A beautiful children's item can be created using bright, voluminous threads.

Winter hat with earflaps with a simple pattern

A classic Russian headdress with ears, designed for the cold season. Knitting is carried out in two threads. They can be the same color or two different tones. The product is intended for a child 7 years old. Size chart for children from 0 to 9 years old.

Materials and tools:

• 100 g of any natural wool yarn (300m per 100 g);
• Knitting needles number 5.

Abbreviations used:

• ISP - purl loop;
• LP – facial loop;
• LPPR-facial, crossed from a broach.

Description of the work progress:

Attention. The pattern of the back of the product is knitted according to the pattern:

1. Having knitted 3 cm from the first row of the back, cast on 21 loops in front, and close the knitting into a solid circle.
2. The work continues in a circle.
3. After 4.5 cm, change the pattern to the front surface.
4. Knit with stockinette stitch up without adding 7.5 cm.
5. They switch to decreasing. To do this, all loops are divided into six parts, each border loop is marked with a contrasting thread.
6. Every 2 loops are knitted together.
7. Continue decreasing until there are 6 stitches left on the knitting needles.
8. The last 6 loops are collected onto one thread, tightened, and the knot is brought out to the wrong side of the product.
9. Ribbons are sewn to the ears.

A hat for the cold season can be made double. The back part is knitted in the same way as the front part, then they are sewn together. The reverse side can be sewn from fleece. Dimensions for tailoring are taken from the finished product.

Hat for newborn

Knitted hats for girls (patterns interesting models, offered by many thematic publications) are made from beautiful yarn, decorated with lace, knitted flowers, and berries. The appearance of the finished product depends on the imagination of the needlewoman. The more decorative elements, the simpler the knitting pattern should be. A baby hat can be knitted in a few hours.

To do this you will need materials and tools:

• straight knitting needles;
• a set of five identical knitting needles;
• 50 g white yarn (blend yarn containing acrylic and wool);
• small balls of colored threads for finishing (brown, orange, yellow)

Description of work:

1. the product begins to be knitted with orange thread, 19 loops are strung on each of 4 stocking needles;
2. knit 3 cm upward with a regular elastic band (alternate 1 L.P., 1 I.P.);
3. change the thread to white;
4. knit 11 cm in stockinette stitch (all stitches in rows LP);
5. change the thread again, knit 1 row with orange yarn;
6. the top loops are closed;
7. the product is folded together, sewn over the edge along the top edge;

The hat is ready. Now all that remains is to decorate it with decorative elements. These can be two small pompoms, an applique or crocheted flowers. You can decorate a hat for a newborn girl with embroidery. The simplest trim is knitted on knitting needles. The maximum possible number of loops is cast on with yellow thread. LP 1-2 rows are knitted. The loops are closed to the end of the row.

The resulting ribbon is wound on a piece of cardboard with dimensions of 4 by 5 cm. A thread is passed under the wound rows. Both ends are connected and the knot is tightened. The bun is removed from the pattern and sewn instead of a bubo to one of the two sharp ears of the cap. The same decorative element is made from brown yarn.

The finishing details can be crocheted.

Summer openwork hat

Knitted hats for girls, patterns of hats for the warm season, offered in large quantities knitting magazines. They are made from individual elements or knitted as a single piece in the round on stocking needles.

Before you begin, you need to take two measurements from the child’s head:

• circle;
• distance from the middle of the ear to the crown.

After this, you need to knit a sample of the pattern, and calculate the number of loops and thread consumption. In the “Wave” pattern, the pattern repeats every 3.5 cm. This means that for a two-year-old girl with a head circumference of 46 cm, 13 repeats will be required.

Each pattern repeat requires 8 stitches. The length of the first row will be: 13 repeats multiplied by 8 + 2 edge loops and 1 loop for lifting the row = 107 loops.

Important. The elastic band of the cap should not squeeze the child's head.

The knitted first rows must be tried on; if the first 5 cm are too tight, the product is unraveled and work begins again, taking into account adjustments for looseness of fit.

To make a hat you will need materials and tools:

• 50 g of green mixed yarn (45-50% cotton, the rest polyamide, acrylic);
• knitting needles No. 2, 3-3;
• hook for assembling the product.

Scheme garter stitch:

Progress:

Spring hat

The demi-season headdress is knitted from thin woolen threads. For a spring hat, use medium density yarn. Otherwise, the work is carried out according to the same schemes as when creating warm winter clothes. The most simple model spring hat with ears.

It is knitted in the round, without dropping stitches. It takes several hours to make such a headdress. The model will fit for girls from 2 to 14 years old.

The pattern of the main fabric can be knitted according to any of the patterns that do not involve reducing the number of loops towards the crown.

Any pattern designed for knitting pullovers and scarves is suitable. The fabric of the hat can be knitted from square elements.

This is done like this:

1. Cast on the required number of stitches on circular needles. Their number must be a multiple of 6 or any other number; the craftswoman chooses the number of loops in one square herself.
2. Several rows of regular elastic are knitted.
3. If there are 120 loops in a row, then further knitting is carried out according to the pattern 6IP, 6LP.
4. The pattern is repeated 6 times, then knitting is done in a checkerboard pattern. Above the LP, IPs are tied.
5. The pattern is repeated again 6 times, then the IP is knitted over the LP again.
6. The fabric is knitted to the desired height of the product, but so that the pattern ends in a complete square.
7. The last row is closed;
8. The hat is folded in half and sewn along the top edge.

A spring headdress can be assembled from individual colored squares. To do this, the required number of identical elements are knitted from threads of different tones. The squares are sewn all together, an elastic band is tied to the bottom edge.

Beret for children

Knitted hats for girls (patterns for models of children's hats can be found for every taste) often have a similar shape and appearance. The beret is different from any other hats.

Short description progress:

1. the child’s measurements are taken;
2. are recruiting required amount loops;
3. knit several rows of elastic;
4. begin to knit rows with a sharp increase in the number of loops;
5. when the desired diameter is reached, they begin to knit decreasing rows;
6. The last 6 loops are tightened with thread;
7. the knot is brought out to the wrong side of the product.

You can start knitting berets not from the elastic band, but from the top of the head. The work is done exactly the same, only in reverse order. Ready product can be decorated with pompoms and embroidery. Even a novice needlewoman can knit a simple beret model with her own hands.

Knitted hats for girls for different weather and tastes. Knitting patterns step by step.

The work is carried out in the following sequence:

1. cast on 130 stitches on circular knitting needles;
2. knit 5 cm upward with a regular elastic band;
3. the loops are divided into 7 equal parts;
4. a row is knitted with IP, and at the border of each segment three LPs are knitted;
5. in the next row, 5 LPs are knitted into each LP, and 1 PI into each LP of the previous row;
6. the product is knitted to the required diameter according to the diagram;
7. start decreasing by knitting 5 LPs in one loop;
8. after this, the number of IPs is reduced to a minimum;
9. when there are 10 loops left on the knitting needles, they are collected on a hook and everyone pulls the thread through;
10. the thread is pulled into a knot;
11. The finished beret is decorated with beads, knitted flowers, and bugles.

Important. Circular knitting is knitted only in LP.

Knitting does not move from left to right, but is carried out rising in a spiral in one direction.

Beret for a 2 year old girl with a relief pattern:

The product is knitted on circular needles. All work is carried out in compliance with the usual stages of beret manufacturing.

The relief pattern is knitted according to the pattern:

Beret with braids for a girl 5-6 years old:

After the hat is knitted to the desired height, begin to reduce the number of loops. Finish knitting by decreasing purl stitches. In the new row, three IPs are knitted into one. Then reduce the number of loops in the pattern by knitting 2 stitches into one. The remaining loops are collected on the hook, and the working thread is pulled through them all at once. Tie a knot. The crown is decorated with a bubo.

Knitting patterns differ from each other different levels difficulties.

Any needlewoman can easily find samples of a knitted cap suitable for her level of skill for a little girl. Children's clothes are knitted quickly due to the small size of the products. They require little yarn, and ready-made hats and scarves for babies in stores are expensive. Therefore, the hobby of knitting brings not only pleasure, but also economic benefits.

Article format: Anna Vinnitskaya

Video about the pattern of knitting hats for girls

A hat with a fold that forms ears and a detachable snood:

In cold winter conditions there is no way to do without such an attribute. outerwear like hats for girls. A hat can become not only an item that keeps you warm and protects your head from snow and piercing wind, but also a part of your child’s image. There are a huge number of hats of various colors and styles on sale, but they are not difficult to knit yourself - either crocheted or knitted.

Knitting a hat for a girl with knitting needles is not difficult. There are many types of knitting that are easy to perform even for beginner needlewomen. If you have some experience, you can choose a more complex pattern.

Which knitted hat for a girl should I choose?

If you are a fan of “rustic” knitting, you can knit a hat using knitting needles from yarn of different colors (the “patchwork” option); in this case, you don’t have to buy any special threads - use the remnants of the skeins that you purchased earlier. Natural wool warms better, although for a girl it is better to take half-wool. But do not forget that wool can shrink, so be careful when choosing a combination of skeins: it may happen that the product becomes deformed after washing.

The flight of fancy is not limited. A knitted hat for a girl with knitting needles can imitate the heads of fairy-tale and real animals (if you add ears and “fur” on top). Sew buttons instead of eyes, and add yarn in a contrasting color for the “muzzle.” Such hats are worn with pleasure not only by children and girls, but even by men who do not lack a sense of humor. An original piece of clothing always attracts attention.

Hats for girls are knitted both in the round (in this case, you can not sharply decrease the stitches in the last rows, but simply pull them together with thread), and with straight fabric - then at the end of knitting you will need to sew the fabric vertically, the seam will remain at the back.

Below you can read how hats for girls are knitted: the description will allow you to avoid mistakes when knitting. You will only need to calculate the yarn consumption (if its parameters - composition, number of meters in a skein - do not coincide with those proposed in the text) and knit a control sample to calculate the loops.

Knitted hat for a girl. Interesting works from the Internet

Knitted hat for girls - raspberry

In such a cute “tasty” hat, your little one will not go unnoticed. A raspberry hat is just what you need to dilute the colors of a dull autumn.
Hat size: head circumference 50-52 cm.

Knitted hat for girls “Sweet”

To knit a hat you will need: Lion Brand Modern Baby yarn (acrylic/nylon, 158m/75g) in a skein of the following colors: pink (A), white B), yellow (C) and blue (D). Also some green and red thread. Knitting needles 3.5 and 4 mm and hook 4 mm.

Knitting density: 20 stitches + 28p = 10×10 cm in stockinette stitch.

Sizes S.M.L for head circumference 43 (48, 53.5 cm).

Knitted hat for girls “Foliage”

Author Anastasia Warkentin. Yarn ONline Linie 165 Sandy 100% mercerized cotton 120m/50g, consumption about 80 grams. Circular knitting needles No. 2.5 for the rib and No. 3.5 for the main pattern. The hat is knitted in the round.

Size 3-5 years (head circumference 51-54 cm). Cap height 20 cm.

Knitted cat hat for a girl

Knitted hat for girls “Snowball”

Hat for head circumference: 42 cm. You will need: 90 g of Merino de luxe yarn (280 m/100 g), double knitting needles stockings No. 3 and No. 3.5

Knitted hat for girls Owl

The hat is knitted for a head circumference of 36 cm.

Knitting needles No. 2. Threads 100% wool, 50 g – 135 m.

Knitted hat for girls with ponytails

There is no description of the hat, but there are knitting patterns:

Knitted hat for a girl

The hat must be knitted from the bottom up, from the bar to the crown. Hat size for head circumference 51(55)60 cm.

Height: 23.5 (24.5) 25.5 cm. Shown in photo the average size by 4 year old child.

Knitted hat for a girl – design by Elena Podel

This hat is one of the designs from the Fair Isle knitwear series. Fair Isle design provides many possibilities for different color combinations, this version is just one of them. You can use just one contrasting color, or as many as you would like. You can also use any sectional yarn DK, or you can knit the hat in solid or semi-solid yarn for a more classic look. The hat is knitted completely in the round from bottom to top.

interesting selection for the site 22 models only for girls

Knitted hat for girls and scarf

Cap sizes: for exhaust 40/43/46/49 cm.
Cap height: 17/17/23/23.
For knitting you will need: 3/4/4/5 skeins of phildar castel (132 m/50 g; 65% acrylic, 25% wool, 10% other) or any yarn of suitable density.

• 3.5 mm (40 cm) circular
• 3.5 mm (80 cm) circular needles.
• 3 mm (80 cm) circles, knitting needles.
• a set of 3.5 mm straight needles or a size that will allow you to obtain the specified density
• marker for the beginning of the row
• stitching needle
• 5 buttons 1.5 cm diameter

Knitted hat for a girl. Works of our needlewomen

Knit a scarf and hat for a girl. Works by Tamara Matus

Knitted hat for girls with chanterelles. Work by Marina Stoyakina

Set Pink bubbles – hat and snood. Work by Tamara Matus

Children's hat baa ble hat. Work by Marina Stoyakina

Knitted scarf and hat. Tatyana's works

Knitted hat for a girl. Anastasia's work

Knitted scarf and hat. Works by Tamara Matus

Hat and scarf knitted Chocolate. Works by Marina Stoyakina

Knitted cardigan and hat. Works by Marina Stoyakina

Knitted hat. Valeria's work

Knitted hat. Work by Olga Yaroslavskaya

knitted hat for girls. Valeria's work

Knitted hat for a girl. Work by Svetlana Shevchenko

Pullover and hat with pompom. Works by Svetlana Shevchenko (Sova Fotina)

Knitted hat for a girl. Valeria's work

In order to knit a bright and original hat with a flirty bow for a 4-5 year old girl required:

• 75–90 g orange and 25–30 g white YarnArt Baby yarn (150 m/50 g, 100% acrylic)
• and knitting needles No. 4.

Pattern 1. Elastic band 1x1: knit rows – k1, purl 1; purl rows - according to the drawing.
Pattern 2. Front stitch: front rows - with front loops, purl rows - according to the pattern.
Pattern 3. “Rice”: front rows – k1, p1, finish with k1; purl rows – purl 1, knit 1, finish purl 1.
Loop calculation: 2 p x 1 cm horizontally.

Cap.

Cast on 79 stitches with orange yarn on size 4 needles.

Knit 6 rows (2 cm) with pattern 1.


This will be the headband of the cap. The width in an unstretched state should be 30-31 cm.


Next go to pattern 2.


Knit 8 rows (3 cm).


From the right edge of the fabric, tie an additional white thread to the working thread. Work 1 row of faces with it. loops.


Starting from the next (purl) row, go to pattern 3. Make 4 rows. At the end of each purl. row, knit the edge loop with threads of two colors: orange and white. Then knit 1 row with purl stitches, cut off the white yarn and secure it.


Next, continue the work with orange yarn, pattern 2.


Knit 12 rows (4 cm) in an even fabric.


Then you need to start shaping the bottom of the cap. To do this, not counting the first two loops, divide the loops on the knitting needle into 7 equal parts.
79 – 2 = 77 p
77: 7 = 11 p
You will get 7 wedges of 11 stitches each. At the beginning of each of them, knit 2 stitches together with a tilt to the left (behind the back walls).


Next, perform decreases in faces. rows, knitting the first 2 sts of each wedge together until there are 23 sts left on the needles.


Transfer them to long hook, cut the working thread, pull it through all the loops and tighten tightly.


Sew the edges of the cap with a vertical knit stitch. To do this, from the front side of the fabric, insert the hook into the horizontal broaches of two loops located next to the right edge. Pull the thread through them. Then insert the hook into the same broaches of two loops located next to the left edge. Sew the product in this way and secure the end of the thread.

The knitted hat is ready. But you also need to tie a bow that will serve as decoration.

Bow.

Cast on 16 sts with white yarn on size 4 needles.


Knit 46 rows with pattern 3 and bind off all stitches.


Fold the resulting rectangle into the shape of a bow. Wrap yarn around it in the middle, imitating a knot.


Then sew the resulting bow to the white stripe on the knitted hat. Hide the ends of the cut yarn on the wrong side of the hat.

Elizaveta Rumyantseva

Nothing is impossible for diligence and art.

Content

Fashion today pampers both children and adults, offering the most different variants clothes. Thanks to this, each person can stand out in the crowd by choosing their own original image. From an early age, children want to go to beautiful things. You can dress your child on a budget but attractively with the help of needlework. Simple hat for girls it is easy to knit, according to simple circuits, even if you are new to knitting. The design can be chosen for a child of any age.

How to knit a hat for a girl

Create a beautiful and original item clothes, if you have the desire and a little patience, it’s not at all difficult. Knitted hats for girls in the form of a snood, a helmet, a hood, or a panama hat are noticeable accessories in any look, and knitting them is not difficult even for a novice craftswoman. All you need is to choose the knitting description you like, preferably with a photo, arm yourself with knitting tools and buy a couple of balls of yarn. If you have unnecessary knitted items suitable color, feel free to disband them and create new models in the next master classes.

Schemes and descriptions for beginners

Simple patterns and uncomplicated models, which are best to choose if you are a novice needlewoman, will allow you to knit a baby hat for a girl in just a few hours. Models designed for newborns or thin summer options are especially easy to create. The speed of knitting depends not only on skill, but also on the thickness of the threads and tools for work.

Winter hat with a simple pattern

For a cute, warm knitted winter hat for girls, buy 100g of dark gray yarn and 25g of pink yarn. Choose knitting tools No. 4.5. Then follow the instructions:

• For a head with a girth of 46/48, cast on 120 pink loops, distributing them evenly across four toe stitches. Then knit a 2.5 centimeter high bar in the round. This is 11 rows in garter stitch.
• When finished, switch to gray thread and knit with stockinette stitch.
• For 39 rub. (approximately 9.5 cm) begin to decrease 15 stitches, then 2 need to be knitted, tilting them to the left. To do this, you need to remove 1, knit the next one, and pull the removed one through it.
• Then everything is repeated: 1 l., 2 knit. Repeat this 6 times to reduce the number of loops to 108.
• Then count 6 rubles twice and repeat the decreases.
• Then - every 4 p., every 2, until there are 24 p. left that need to be pulled together.
• Decorate the side of the product with a small white flower or beads.

For a newborn

The peculiarity of knitting clothes for a newborn is that it should be as simple as possible. For this model, purchase 50 g of light beige yarn. The work will be done with knitting needles No. 2, 3, 5. First, take numbers 2 and 5, cast on 80 stitches, distributing them evenly across 4. A hat for a girl is knitted with an elastic band in circular rows of 3 centimeters. Continue working in the round at number 3. In the first round you need to decrease 8 loops. Then make a decrease every 10 cm in every 2 circles. Repeat this three times, after which you knit 2 stitches in each 2nd circle. Pull the remaining rows together.

Summer

If you want a lightweight flyable model, choose cotton yarn in rich colors. The work will use an elastic band, purl stitch, then knit stitch. Measure the baby's head, divide the amount by 10 centimeters. Then cast on a row of loops of this length and count how many loops there are in it. Multiply the number of loops by the previously obtained amount and round it so that it is divisible by 6. Then it is convenient to divide the fabric into wedges. Next do the following:

• Until 13 p.m. knit the elastic with two knit stitches and two purl stitches.
• 14 rub. consists only of facial loops.
• The next two consist of only purls.
• The next two consist again of facial ones.
• Then you knit two rows again.
• 22nd r. changes to facial. Every 10th and 11th loop in it is knitted together. Mark the places of the ligaments with a thread of a different color.
• Next, knit 2 p. alternate faces, purl.
• For 27 r. begin to decrease 2 loops at the marks.
• At the end, pull the thread through the entire product, pull it tight, fasten, and sew the sides.

Spring

For a spring hat, take knitting needles number 6 and 7; you will also need a needle and scissors. The product will be made with an elastic band and a braid pattern. You will need 100 g of yarn. Get started:

• Cast on 54 loops. Knit 5 centimeters with an elastic band, alternately knit 2, purl 1.
• Next, add 1 loop in each purl. You will get 72.
• Continue to No. 7. Work row 2/2 (knit/purl).
• Next is a row of faces. and purl, tied together.
• Alternate one row: k2. with one purl..
• In this row, purl all the stitches.
• Knit one row.
• Knit 2 r. like this: all loops are two.
• Finish by tightening and securing the auxiliary thread.

Children's hat with ears for girls

For a children's hat with ears, prepare 100 g of wool or cashmere yarn, knitting needles number 5.5. For this model, the technique of elastic band and stocking stitch is used. Get started:

• Decide on the number of loops depending on the circumference of your head.
• The first row is knitted with an elastic band. To do this, the first loop is removed, the second is knitted purl, then knit, and so on. When you reach the middle loop, mark it with thread.
• At the marked location, pull the line out of the knitting needle to pull half of the stitches towards the left. The right loops remain in place. Continue working. At the end of the row, pull the line again.
• Knit 5 centimeters with an elastic band.
• Next, knit 5 r. only persons. loops.
• In the next row, decrease by knitting two stitches as one.
• Repeat the decreases 5 times every 5 rubles. on the sixth.
• Try on the hat for your child. If it's just right, finish the job.
• Using a hook, make eyes, inserting it into the loop on the far, then on the near knitting needle. At this time they are kept parallel to each other. This will close all the loops.

Ushanka

This hat is suitable for children aged 3-4 years. It will protect your baby's ears well from the cold. The head circumference is 52 cm. The work is performed with a 6 mm knitting tool. The loops must be crossed, removing 2 loops on an additional knitting needle and placing them before work. Then knit 2 on the left, then 2 knit with an additional one:

• “Ears” are knitted in 11 rows, starting the first with 4 stitches and ending with the 12th, each time adding 2 stitches at the beginning and at the end of the row.
• Knit the first part and set it aside, do not break the second thread, but pick up 14 stitches on it on the right, then connect to the left side.
• Next, you need to knit the loops into the pattern, knit 14 cast-on loops, pick up another 24 stitches, and connect in a circular row.
• Next, the headdress is knitted in a circle, 6 r each. crossing is performed.
• You need to make a 16-centimeter fabric, then decrease, leaving only 14 stitches.
• Finally, pull the thread through them and secure.
• Make a binding of 88 stitches along the product.
• Knit 2 rows with an elastic band. from 2 persons. and 2 out.

Helmet

This product is intended for children from six months to 12 months with a head circumference of 43-48 cm. From materials, prepare 1 skein of acrylic yarn, 3.75 and 4 mm knitting needles, two stitch holders, and a needle.

• Take smaller needles and cast on 82 sts.
• Front side up to 2nd p. knit with an elastic band according to the pattern: 1 p., 2 knit., 2 p., then repeat everything until the end, where 1 knit stitch closes.
• 3rd r. consists of knit 3, purl 2, knit 2. Then put 7 stitches on the holder, knit with an elastic band to the final 7 loops.
• After this, turn the work over and set aside the last 7 stitches.
• Take a 4-mm tool, knit 4 stitches, add a loop, and knit until the last 4, which you make into knit stitches.
• Continue knitting in garter stitch until you reach 16.5cm.
• Decrease by knitting 6 r. and closing 5 p.
• For another 3 rubles. close in 3 stitches, then bind off all the loops and sew the seam.
• Knit the neckline from the front side with small knitting needles evenly around the entire circumference.
• Make 2 p. from the wrong side with an elastic band, repeating up to 5 cm in height. Close the loops and sew the seam.
• At the end you need to sew on a button for the fastener.

Beret for children

A funny beret will be great to wear in the spring, the instructions described are suitable for a head with a circumference of 53-56 cm. The beret will lie beautifully on the back of the head. For it you will need 2 skeins of yarn, circular knitting needles measuring 2.5 and 3 mm:

• It is necessary to cast on the tool 2.5 mm 112 stitches using an Italian cast-on and connect them in a circular row.
• The next step is an elastic band of 2 rubles.
• Next, alternate knit 1, purl 1. 4 cm in height.
• Then knit on 3 mm, add. To do this, knit 1 purl, add a loop, then 1 knit, add a loop again, 2 knits, increase, 1 knit, increase again. Repeat 14 times until you get 182 sts.
• This is followed by knitting with a pattern called “Leaves and Vine”, which consists of 8 p. They are repeated 5 times. Then 6 rubles. 1 time.
• For 17 r. Decrease is performed until there are 17 stitches left that need to be pulled together.

Openwork hat

Prepare 1 skein of yarn of the desired color, knitting tool number 3. Depending on the time of year, choose the density of the threads. For more interesting looking For a future hat for a girl, you can use knitting threads of 2 colors. The following product is suitable for babies aged 1-3 months:

• Cast on 93 sts. Knit the rib in 4 rows 1 to 1.
• At 5 p.m. the pattern begins. It is performed by knitting 1 purl, 5 knits. loops
• In the next 3 r. knit 1 purl, 2 together, 1 yarn over, knit 1, 1 yarn over again, the last 2 loops together with the front stitch.
• Knit the next row as the stitches go.
• Repeat the previous 3 times again. Knit 10 centimeters.
• For 55 rub. the bottom is done. To do this, divide the loops by 6. Every 2 first and 2 last are knitted into one.
• When you decrease to 21 sts, pass the thread through the product and tighten.
• All that remains is to connect it at the back and sew on a lace for tying.

Kapor

The following scheme is suitable for girls up to three months. You will need yarn of the desired shade, 4 mm double needles. The knit stitch is done like this: you need to knit knit stitches on the front side, purl stitches on the back side. For purl stitch, purl stitches are knitted on the right side, knit stitches on the opposite side. Then the work is done like this:

• Dial 26 p.
• Knit 3 r. stockinette stitch.
• Cast on 8 stitches in garter stitch and 18 in purl stitch. Next, alternate them until you get 45 scars per stitch.
• Knit 3 more rows. stockinette stitch.
• Close the loops and sew the seam.

Pattern Schemes

For decoration knitted products Several basic ornaments are used. It’s worth going through the lessons on them once, and your knitted hat for a girl will turn out beautiful and original:

• Honeycomb pattern. The number of loops in it is a multiple of four plus two edge loops. Each row begins and ends with edge loop. In the first row, after it there is a crossed loop behind the back wall, then behind the front. 2, 4, 6, 8 r. Knit only with purl stitches. Z r. consists of facial loops. 5 rub. repeats the first one. 7 rub. consists of facial loops. This pattern is repeated the required number of times.
• Openwork pattern leaves need to be knitted according to a specific pattern. It will indicate the number of front rows, and the back rows must be created based on the drawing. “Leaves” are obtained by alternating yarn overs with decreases while knitting 2-3 stitches together. These techniques are done only in the front loops, and the purl loops correspond to the pattern. Yarns in them are knitted purlwise.
• Braid pattern. The first row consists of 2 purl, 8 knit, 2 purl. In 2, 3, 4, purl stitches are knitted above the knit stitches, and knit stitches are knitted over the knit stitches. 5 rub. starts with 2 purl, then 4 pieces are removed without knitting to the auxiliary one. Next you need to knit 4 faces. loops. Slip the first 4 stitches from the auxiliary stitch onto the main stitch and knit. Then everything is repeated.
• The plait pattern is knitted according to many patterns. For example, with inclined hinges. To do this, cast on a number of loops that are a multiple of 10. To them you need to add 2 stitches for symmetry, 2 edge stitches. 1 rub. starts with two purls, then 4 knits, the eighth, ninth are removed to the auxiliary, followed by 2 knits, then 2 knits. with auxiliary, last - 2 purls. All even rows are knitted with purl stitches in the front row, and vice versa in the purl row. 3 r. repeats the second, but 5 and 6 sts are removed. In 5 p. everything is the same, only 3 and 4 are removed. From 7 p.m. everything starts all over again.

For a teenage girl

A teenage girl is more picky than Small child, but you can cope with the task if you choose one of the knitting patterns in trends that are fashionable today. Spectacular knitted models hats with cat ears, fashionable knitted ruffle trim, pompom decoration, jacquard patterns. A beanie hat for girls with an elongated top can please even the most stylish young fashionista.

Cat hat with embroidery

A cute baby hat for girls is knitted using stockinette stitch, along which the cat's face is knitted. Knitting tools are used circular or regular. In the second case, the halves of the hat will need to be sewn together. In addition, you will need 90 g of light-colored yarn, 5 g of black for embroidering the nose and eyes. Then follow the diagram:

• Take the circular ones at number 4, cast on 68 sts.
• Knit 1 p. facial, 1 r. purl stitch. This is an elastic band. By this alternation you need to perform 10 r. Loop density – 15.
• Then knit another 38 rows in stockinette stitch.
• For 39 rub. close the loops.
• At the final stage, you need to make a seam, embroider a design with black threads in the form of eyes and a nose.

Double winter with large bubo

To knit a hat for the winter you will need to spend about 100 grams of yarn. Both layers, the top and the lining, are knitted in two threads. Start with a sample:

• Cast on 20 stitches using thin knitting needles.
• Remove the edge, yarn over, then knit, yarn over, knit again.
• At 2 p.m. Yarn over before the edge is not done. Remove purl, knit, and so on.
• Make 8 p. in a circle, where all purl loops are removed and knit stitches are knitted.
• The stacked row can be unraveled, using non-circular larger ones.
• Close the elastic by removing the edge, knitting and purling together 2 times. Then purl, knit, 2 are knitted together, 2 are knitted together again. Repeat.
• Knit a braid of purl 7, knit 12, purl 7. Do this 6 times. After this, the loops need to be crossed.
• Now it's time for the top of the hat. It will require about 70 p.
• Knitting a braid. It consists of 3 purl. at the beginning and at the end, in the middle, alternate 12 faces. with 6 p.
• After 3 p.m. up starts decreasing every 4 p. To do this, there are two purl sides on the sides of the braids. are knitted together.
• Without lifting the elastic, loops for the inner lining are cast on. Purl 1 row, knit rows next. Periodically apply the pad to the top to reduce it in time. This is done in the same way as in the upper part.
• Sew the two pieces together.
• A pom pom is made by wrapping string around two circles of cardboard.
• Then they are cut along the edge and tied tightly in the middle.
• The pompom needs to be carefully trimmed and tied to the hat.
• Decorate the product with snowflakes.