The most important thing in life is the health of our children, and in order to preserve it, we must always keep our heads warm, because hypothermia is very serious, and it can cause serious health problems. Very difficult to find suitable model headdress for little girls. Therefore, it is easier to tie it yourself, perfect choice It will become a beret, because it is a universal headdress, it looks very cute and will suit absolutely any child. Don’t worry, it’s not difficult at all, and in this article we’ll tell you how to knit a beret for a girl.

For the little fashionista

Let's knit a beret for your daughter, because it is much more pleasant to wear something when you know that your mother made it for you with her caring hands. Such the model will fit for girls from 10 years old.

This technique is not at all complicated, and is suitable even for beginners in needlework, so don’t be afraid and boldly get to work.

• First, cast on 130 stitches on circular knitting needles and knit an ordinary elastic band 1:1, about five centimeters wide, or as desired. When you finish knitting the elastic, divide the loops into seven sectors with purl loops, and between them make three front loops. In the second row, which follows the elastic band, five stitches must be knitted from each front stitch. As a result, you should end up with a level with 15 knit stitches, which alternate with sections of purl stitches.
• We knit the product with this pattern to the size you need, and after that we begin to make decreases, first reduce the purl ones, and then the front ones. When there are fewer than ten stitches on the needles, pull the working thread through the remaining stitches and tighten them. The beret is ready, it can be decorated with beads, butterflies, flowers, beads, embroidery, in general, anything that suits your imagination.

The smallest

The youngest ladies also want to wear a fashionable beret made by their beloved mother. Therefore, we suggest knitting a wonderful headdress for a 2-year-old girl. This technique is also quite simple.

This beret is knitted on circular needles. Carefully study the pattern below, this is how the main pattern will be knitted.

When knitting in the round, the stockinette stitch is knitted only with knit stitches, as is the purl stitch - only with purl stitches.

In addition to the pattern, which is the main one, when working on this beret, a relief pattern is also used, it is performed according to this pattern: two rows in stockinette stitch, third row - *two loops together, purl loop, yarn over* - and repeat until the end of the row , fourth row - knit stitches again.

Next, take the sock knitting needles and distribute twelve stitches on them, you should get three on each and knit the main pattern (don’t forget about the pattern). We continue knitting until there are 35 stitches on each knitting needle. Now we work according to the pattern: *4 rows with front stitch, 4 rows with purl stitch* and repeat from* to* again.

Next, we again knit four rows with a relief pattern, and then five rows with purl stitch. At the same time, with each change of pattern in the first row, make decreases by knitting two stitches together every ten stitches. Close the remaining loops, thus completing the work.

Cap with braids

Let's try to associate the beret with a very beautiful pattern– braids, this will be an excellent headdress for girls 5-6 years old. The pattern with braids is always relevant, the product will turn out warm and your child will definitely like it.

Work process. Cast on eighty stitches on the toe knitting needles, you should end up with twenty stitches on each knitting needle, and knit with your usual 1×1 elastic band, about three centimeters wide. In the next row after the elastic, make one crossed yarn over after each loop, with this action the number of loops should double.

Now we evenly distribute ten loops per braid pattern and ten per purl stitch. Repeat this pattern eight times, knit two repeats in height.

Now we begin to make decreases: in every fifth row, knit two loops together on both sides of the purl stitch. Such decreases should be made until only the stitches of the pattern remain on the knitting needles.

In the next row we knit two loops at a time, and we tighten the remaining loops with a working thread and finish working on our headdress.

Choosing a headdress for a girl is not an easy task. It should be of high quality and comfortable. And besides this, match the rest of the clothes. In this case, the beret can become the subject of choice. Even an inexperienced knitter can knit a beret for a girl using knitting needles according to the descriptions in this article.

Pink beret for girls

The model is designed for a child's head volume of 50cm-52cm.

We will need:

• mixed yarn – 60g;
• knitting needles No. 2.5;
• knitting needles No. 4.

Patterns:

• elastic band: 1l.x1p;
• openwork: performed according to design; in purl rows We purl all the loops.

Description

Using knitting needles No. 2.5, cast on 152 stitches. and knit 3cm elastic bands. Let's go to sp. No4 and openwork pattern. We knit 5 repeats and 1 cr along the edges. In the 55th r. we halve the number of stitches. To do this, we knit 2 stitches. in 1 person 71p left. In the next r. repeat the decrease, knitting 2 stitches at a time. in 1 purl. 36p left. We break the thread, leaving a long end, thread it through the remaining loops, and tighten. We sew the beret with the same thread.

Summer openwork beret: video instructions

Simple beret for baby

The model is knitted in the round, simple pattern. We make decreases along 7 lines.

Calculated for head circumference 38 (41) cm. Product height in finished form 22 (25) cm.

We will need:

• yarn, pure wool (50g per 120m) – 100g;
• set of double needles No. 3;
• circular knitting needles No. 3, length 40 cm;
• marker;
• button to match the color of the yarn for decoration – 1 piece.

Pattern:

• facial stitch - when knitting in the round in all rows. All stitches are knit stitches.

Density: 22p. for 30r. wounds 10cm by 10cm.

Description

Cast on with knitting needles 84 (90) sts. and knit 5cm in a circle. iron. Next r.: *2p. in 1L., 1N.* – from * to * we repeat on all sts. Then we continue knits again. ch., adding 1 p. to the next row. after every 3p. 28 times. (alternately after the 2nd and 3rd steps 36 times). We get 112 (126) p.

After 7 (8) cm from the cuff, place a marker near 16 (18) sts. row 7 times. In the same row we knit the marked stitch and the previous one in 1 person. In work – 105 (119) items. We repeat the decreases in every even row. another 14 (16) rub. 7p left. We break the thread, thread it through the remaining stitches, tighten it, bring it to the wrong side and fasten it. Sew on the button.

Openwork beret for a girl

The model is designed for a head volume of 54 cm.

We will need:

• yarn, 100% cotton, (50g per 125m) – 70g;
• circular sp. No1.75 and No3;
• markers.

Patterns:

• elastic band: 2 knits x 2 purls;
• pattern: see diagram.

Important!

We install markers after each rapport. We have 9 repetitions in a row.

At 15r., 21r., 28r., 34r., 39r., 43r., 44r. diagram, remove the 1st stitch of the row. We perform the last decrease in the center on the outer two stitches and the first removed stitch of the row. Remove the markers for the beginning of the circle. R. and install them again after performing the decrease.

Increasing the loop with a tilt to the right

1. We knit faces. behind the back stitch (wrong jumper) a row below directly under the loop on the sp.
2. Knit into a loop on a knitting needle, then remove both stitches from the left sp.

Description

Knitting a beret is done from top to bottom.

We cast on with knitting needles No. 3 9p. We distribute them into three or four sp., set a marker and switch to knitting in the round.

2p.: *1l., add 1p. with a tilt to the right * - from * to * we repeat until the end of the river. We have 18 p.;

3 p.: * 2 p., add 1 p. with a tilt to the right * - from * to * repeat until the end of the p. We have 27 p.;

We perform with knitting needles with 1p. for 49 rub. pattern, repeating from 13r. 17 rub. and from 24r. 30 rubles each, as indicated in c. As you work, we switch to circular knitting needles - when it’s convenient for you. We only have 108p.

Headband

We knit this part with knitting needles of a smaller diameter. At 5 p.m. We do the elastic band. Close the item loosely without tightening it. We break the thread and carefully hide the end. To give the shape, lightly moisten the beret and stretch it onto a plate about 28cm in diameter. Let it dry.

Children's beret with knitting needles - made with wedges: video MK for beginners

Blue beret

The model is designed for a head circumference of 53 cm. The diameter at the widest part is 80 cm, height is 17 cm.

We will need:

• mixed yarn – 100g;
• knitting needles No. 3 and No. 4.5.

Patterns:

• elastic band: k2x2p;
• basic hedgehog pattern:

1 p.: 1 cr., * 1 p., 1 p. * - from * to * repeat until the 2 extreme sts., 1 p., 1 cr.;

2p.: 1kr., *p. we remove the p., first making a yarn over over ourselves, 1 knit.* – from * to * repeat, 1 cr.;

3p.: 1kr., *knit single stitches in 1l. for the top slice, remove the double crochet loops, having first yarn over yourself* - from * to * repeat, 1 cr.;

4p.: 1cr., * we knit stitches with two double crochets in 1 purl., we knit single stitches. for the top slice* - from * to * repeat, 1cr.

Repeat from 1st row. The pattern is on even rows. See diagram:

Description

We cast on with knitting needles No. 3 88p. and knit a 7cm elastic band in a circle. Let's go to sp. No. 3.5 and perform the “hedgehog” pattern. We knit 12cm, which corresponds to 12 repeats of the pattern. In the 13th rapport we close 3 points. in 1p., t. e. one hedgehog cone 15 times. Then we knit 2 repeats of the pattern in height without decreasing. In the 16th rapport we close 3 p. 10 times, i.e. 10 cones. Then we knit rapport in height without decreases. After the 17th repeat, we break the thread, thread it through the remaining loops, tighten it, bring it to the wrong side and fasten it.

Angora beret

The model is designed for several sizes - for girls aged 3 (6) 9 (12) months.

Head circumference 12 (14″) 16 (18″).

We will need:

• yarn, 100% angora, (10g per 45m) – 20g;
• sets of double needles No4 and No5;
• marker.

Patterns:

• persons stitch: when knitting in the round, all stitches are knitted:
• elastic band: 1l.x1p.

Density: face. iron with knitting needles No. 5p. equal to 2.5 cm.

Description

We dial on sp. No4 60 (70) 80 (90) p., set a marker. We switch to circular knitting, perform 7p. rubber bands. Let's go to sp. No5 and persons. smooth surface Having knitted 2 p., we make increases:

1p.: *6 (7) 8 (9)l., 1p. from broach* – from* to * we repeat on all sts. We have 70 (80) 90 (100 sts)

We make such additions three more times.

Next r.:* 7 (8) 9 (10) l., 1 p. we repeat their broaches* – from * to *. We have 80 (90) 100 (110) p. We knit another 1.5″ knits. Ch.

1st: *3l., 2p. in 1l.* – repeat from * to *. Repeat on 3 rows.

Track. r.: *2l., 2p. in 1l.* - repeat from * to *. Repeat on 3 rows.

Track. r.: *1l., 2p. in 1l.* – repeat from * to *. Repeat on 3 rows.

Track. r.: *2p. in 1l.* – repeat from * to *. Repeat on 2 rows.

Track. r.: 0 (1) 0 (1) l., *2p. in 1l.* – repeat from * to *. U on 4 (5) 5 (6) p. We knit 1.5″ for the tail. We break the thread and fasten the remaining loops.

How to knit a baby beret: video master class

Selection of schemes

Even a needlewoman who has just recently picked up knitting needles and is just learning to knit can knit a beret for a little girl using knitting needles. You just need to master knitting the two most necessary stitches: knit and purl, and everything will work out. We choose a pattern consisting of familiar loops and get to work.

We knit a simple beret for a girl using knitting needles in a step-by-step tutorial

When knitting it you need to be able to knit only knit and purl loops. Therefore, this model is perfect for beginners because it takes on very quickly and is easy to knit. The description is given for a 4 year old girl. For work you will need: 100 gr. thread (if you need a warm beret, it is better to take soft wool yarn) and knitting needles No. 3.

1. We put 88 stitches on the knitting needles and knit 4 cm with a 1:1 elastic band, then we knit one row completely with knit stitches (knit stitches) and 1 more purl stitches and knit another 4 cm of elastic band. this will be the beret cuff.
2. Next we will make increases “2 persons. p, 1 yarn over” so we knit the entire row, you get 132 loops.
3. Now we knit 40 rows from the elastic evenly. After this, we begin to decrease through one row.
4. We knit 10 faces. p, 2 knit together - repeat until the end of the row.
5. Next decrease: 9 persons. p, 2 together - to the end of the row
6. Now there are 8 persons. p, 2 together - the whole row.
7. Thus, we reduce the loops until there are 12 pieces left on the knitting needles, after which we tighten them all at once with thread and sew the seam with the same thread. This beret will also look good knitted in garter stitch.

Trying to knit a bright beret for every day with our own hands

Cute beret for a girl made of bright yarn with detailed description. Any needlewoman can knit. Let's prepare 100 g of yarn. (wool/acrylic, 250m/100g) and knitting needles No. 3. Size for a 3-year-old girl.

Sample density: 28p?32p = 10x10 cm.

1. We cast on 98 stitches + 2 edge loops (the number of loops should be a multiple of 7 + 2 edge loops). We knit 6 cm with an elastic band 1:1.
2. We knit the next row with alternating “3 persons. p, 9 p. p" knit like this until the end of the row. On the wrong row we knit the loops according to the pattern.
3. Again a front row of 3 faces. p. knit 5 by alternating the crossed yarn over and the front loop.
4. Next we knit 9 cm in accordance with the pattern and begin to make decreases.
5. Decrease by knitting strips of knit stitches in the center of the purl row, 2 together. Repeat only in purl rows until 1 loop remains in these strips.
6. After this decrease, we will make stripes in the center, removing 3 loops at a time from the front side, until 1 loop remains in these strips.
7. We knit the remaining loops several more times according to the pattern, then we tighten them with thread and sew the seam. We steam the product.

A beautiful beret for spring with a description for a 2 year old girl. Model related openwork pattern with a decorative element of a flower with a bead. Even the most demanding little fashionista will love this bright, beautiful hat.

For knitting you need to prepare: 50 gr. thread (cotton/viscose), knitting needles and crochet hook No. 2 and a bead for the center of the flower.

The flower is crocheted like this: 20 chain stitches; 1 row of double crochet stitches, then we gather with a thread and pull the flower together, forming a bud, and sew a bead into the center.

Knitting double elastic bands 1?1: in the knit and purl rows you need to knit only the knit stitches and purl them, just put them on a knitting needle (do not knit).

1. We will cast on 152 loops on the knitting needles and tie them with an elastic band of 3-5 cm.
2. After this, in the first front row we will increase the number of stitches to 211, thus: 3 knits. n, 1 yarn over – alternate until the end of the row.
3. We continue knitting according to the pattern straight to a height of 4 repeats. And we begin to make decreases like this: in each front row we knit 2 loops together.
4. Thus, we decrease until there are 13 loops left on the knitting needles. We tighten the remaining loops and sew the seam on the beret. Sew a flower to the product.

An interesting quadrangular model with pom-poms at the corners will cheer up a child and make an adult smile. Calculation made for size 48-52. To knit a beret you will need: 100 g. yarn (125m/50g), knitting needles No. 3-4. The photo clearly shows the location of the pompoms and where increases and decreases are made on the canvas.

1. We cast on 104 stitches on the knitting needles and distribute them equally across 4 knitting needles, making 26 on each.
2. We knit 4 cm with a 2:2 elastic band, after which we continue knitting with facial loops.
3. We increase at the corners 9 times with 8 loops in every second row. It turned out to be 176 p.
4. After all the increases have been made, we begin to decrease. We remove in the same places where we added 8 loops per row. We will repeat the decreases 20 times until there are 8 loops left on the knitting needles, we will tighten them with thread and hide it inside the hat.
5. Let's make 4 pom-poms and sew them to the corners. Beretik is ready.

Video materials on the topic of the article

When watching video lessons, you can understand what was not very clear when analyzing the description or diagram. You can knit a beret, starting not only from the headband, but also from the top of the head. The video shows in detail how to do this.

You will need: 70 g each of lilac-pink, blue and pink yarn; knitting needles No. 5.

Basic pattern: 1. Garter stitch. 2. Pattern with elongated loops. The number of loops should be divided by 2 + 2 edge loops. 1st row: 1 edge stitch, “1 knit stitch, 1 yarn over, 1 purl stitch.” repeat from “to” 1 edges. p. 2 row: 1 edge. p., “Slip 1 loop, working thread in front, yarn over, 1 knit stitch,” repeat from “to” 1 edge. p. 3 row: 1 edge. p., “Slip 1 loop, working thread at the back, 1 p.”, repeat from “to” 1 edge. p. 4 row: 1 edge. st. “Knit 1, slip 1 loop, working thread in front,” repeat from “to” 1 edge. p. 5 row: 1 edge stitch, “P1, 1 yarn over, 1 knit stitch,” repeat from “to”, 1 edge. p. 6 row: 1 edge. p., “Slip 1 loop, working thread in front, yarn over, 1 knit stitch”, repeat from “to”, 1 edges. p. 7 row: 1 edge. p., “P1, slip 1 loop, working thread at the back,” repeat from “to”, 1 edge. p. 8 row: 1 edge. p., “Slip 1 loop, working thread in front, 1 knit stitch,” repeat from “to”, 1 edge stitch. Repeat further rows 1-8.

Knitting density: 17 p x 30 p = 10x10 cm.

Alternating yarn colors: 2 rows - lilac-pink yarn, 8 r. - blue yarn. 8 rub. - lilac-pink yarn. 8 rub. - pink yarn. 16 rub. - lilac-pink yarn. 8 rub. - blue yarn. 12 rubles - pink yarn.

Decreases. Decrements are made in the 4th or 8th rows, knitting 3 stitches together. Using lilac-pink yarn, cast on 76 stitches. Knit 3 cm in garter stitch, evenly adding 24 stitches in the last row (100 stitches). After this, switch to a pattern with elongated loops, alternating the color of the yarn. In the rows knitted with lilac-pink yarn, perform 4 even decreases as described above until 68 stitches remain. After this, knitting the next 4 rows, perform 10 even decreases of 2 stitches. (16 p.). Then knit every 2 sts. Knit together and pull off the remaining 8 sts with the end of the working thread. After this, sew the back seam with the same thread.

Come, take it apart, we knit hats online...(owl hat, strawberry hat, hats with ears, hat with pompom, cat hat, etc.) (source Country of Mothers)

Come, take it apart, we knit hats online...(owl hat, strawberry hat, hats with ears, hat with pompom, cat hat, etc.)

Ears.
Cast on 24 loops (or another number, depending on how thick your yarn is, to get the desired width), close it in a circle.
1p: 3 air loops, 2 tbsp. s/n together, 7 tbsp. s/n, 2 tbsp. s/n together, 1 tbsp. s/n, 2 tbsp. s/n together, 7 tbsp. s/n, 2 tbsp. s/n together.
2p: 3 air loops, 2 tbsp. s/n together, 5 tbsp. s/n, 2 tbsp. s/n together, 1 tbsp. s/n, 2 tbsp. s/n together, 5 tbsp. s/n, 2 tbsp. s/n together.
3p: 3 air loops, 2 tbsp. s/n together, 3 tbsp. s/n, 2 tbsp. s/n together, 1 tbsp. s/n, 2 tbsp. s/n together, 3 tbsp. s/n, 2 tbsp. s/n together.
4p: 3 air loops, 2 tbsp. s/n together., 1 tbsp. s/n, 2 tbsp. s/n together, 1 tbsp. s/n, 2 tbsp. s/n together, 1 tbsp. s/n, 2 tbsp. s/n together.
5p: 2 tbsp. s/n together to the end of the row.
Thread the threads in exactly the same way, only immediately behind 4 arcs of opposite columns, so that there is no hole, to form a tassel.

Braids are made very simply, take the required length of thread in 3-6 folds (depending on how thick the braid you want to achieve) in 3 colors, thread threads of each color through both arcs of the 3rd middle posts of the binding, bend it in half, and just braid a regular braid .

Here is a small collage collected from the internet for your inspiration. But you can imagine better yourself. That's more interesting

Hat with lily The girls knitted on Osinka. http://club.osinka.ru/topic-82075?&start=8430 and our country mothers also recently knitted it...
Here is Lily's cap. Here is a diagram of a lily petal:

Knitted strawberry hat.


There is an excellent MK here

In the 14th row I aligned the pattern


Next I knitted 3 rows of double crochets with green thread


4th row, single crochet, every 9 stitches I cast on 8 VP, hook it with a stitch (marked in red for green in the diagram), then again 8 VP and continue along the row. Having knitted the row to the end in this way, I made a connecting loop, turned the hat over, and reverse side I tied these arches from VP with double crochets according to the pattern


At the top there is such a kind of picot, the central VP hooked onto the top row (it turns out differently, where in a loop, where behind a column), and starting each new leaf after 3 stitches with 2 double crochets, I hooked the loop onto the previous leaf .


Next are 4 rows of single crochets, and in the same rows we knit ears according to the pattern

Here is a tutorial on knitting strawberries http://muravka.blogspot.com/2010/11/blog-post_15.html
flowers
leaves

Here's another Kotoshapka. But here, who has enough imagination for anything...

AND HERE IS MY CAT HAT WITH MK

CAT HAT - EARS:
To begin with, I marked the middle (top) of our hat with a marking ring. Then, starting from the edge of the hat, I cast on two loops from each side (edge) loop: one pulled out from the back wall of the loop, and the second from the front wall of the side loop. I ended up with 78 stitches in the work. These are loops for the elastic on the ears. I knitted the rib knit 2 to k2….
In the 5th and 9th rows at the crown I added one loop each = 80 loops in the work. We also knit 2x2 elastic. Then I knitted without increasing until the 13th (front) row. Starting from the 14th row, I knitted shortened rows. I want to immediately warn you that I did this for the first time and on my own, since I am self-taught. And also, when we unfold the shortened rows, we start the new row with the first unknitted loop (as if it were an edge loop). So:
14th row: do not knit 19 loops to the end of the row (if you count together with edge loop original knitting), leave a marking ring in the last loop. Unroll the knitting and knit the 15th front row to the end.
16th row: do not knit 23 loops to the end of the row (if you count them together with the edge loop of the original knitting), leave the marker in the last loop. We unfold the knitting and knit the 17th front row to the end.
18th row: do not knit 27 loops to the end of the row (if you count them together with the edge loop of the original knitting), leave the marker in the last loop. We unfold the knitting and knit the 19th front row to the end.
20th row: do not knit 31 loops to the end of the row (if you count them together with the edge loop of the original knitting), leave the marker in the last loop. We unfold the knitting and knit the 21st front row to the end.
22nd row: do not knit 34 loops to the end of the row (if you count them together with the edge loop of the original knitting), leave the marker in the last loop. We unfold the knitting and knit the 23rd front row to the end. And leave a marking ring in the last loop of this row.


THERE SHOULD BE FIVE SHORT ROWS IN TOTAL. From the 24th purl row we begin to gradually return to the beginning of knitting.
24th row: knit 47 loops (if you count them together with the edge stitch). We unfold the knitting again and knit the 25th front row.
26th row: knit 51 loops (if you count together with the edge stitch). We unfold the knitting again and knit the 26th front row.
28th row: knit 55 loops (if counted together with the edge stitch). We unfold the knitting again and knit the 29th front row.
30th row: knit 59 loops (if you count them together with the edge stitch). We unfold the knitting again and knit the 31st front row.
Row 32: knit the row to the end.
Next we tie the eyelet symmetrically. And the marking ring at the end of the 23rd row will help us with this. We also don’t forget where you need to gradually cut two loops from the edge of the eyelet on the top of the head, so that again there are 78 loops left in the work.