Making a rocket with your own hands is the future. Homemade rocket: if you really want to, you can fly into space! How to make a rocket out of ordinary cardboard with your own hands - diagram and description of work

A cool mock-up of a rocket or a real flying rocket can be made at home without any problems. To carry out the work, you can use any available materials: paper, cardboard, plastic bottles, matches and foil. Depending on the chosen master class, you can receive beautiful toy or a full-fledged model copy of a real rocket. All descriptions are supplemented with step-by-step photos and video instructions, which greatly simplifies the assembly of products. You can learn in detail how to make a rocket with your own hands and make it fly in the master classes below for adults, teenagers and children.

How to make a rocket with your own hands so that it flies - a step-by-step master class with a description

The simplest flying rocket can be made at home. The master class below clearly describes how to make a paper rocket that flies in literally 5-10 minutes. The work will be suitable for both adults and teenagers. A simple instructions How to make a paper rocket does not require the use of special components: it can be assembled from scrap materials.

Materials for making a flying rocket with your own hands

  • paper;
  • scotch;
  • a piece of metal-plastic pipe;
  • soft hose;
  • 2l bottle.

Step-by-step master class on making a flying rocket with your own hands


How to make a rocket out of ordinary cardboard with your own hands - diagram and description of work

Even a child can make a cool cardboard rocket. This layout is perfect for decorating a room. How to make a cardboard rocket with your own hands according to the diagram is described in the master class below with step-by-step photos.

DIY materials for assembling a space rocket from ordinary cardboard

  • rolls from toilet paper;
  • white cardboard;
  • thin colored paper(yellow, red);
  • shiny self-adhesive paper;
  • scissors;
  • paper tape;
  • red and silver paint;
  • astronaut figurine.

Step-by-step instructions for assembling a cardboard rocket with your own hands

How to make a rocket from a bottle so that it takes off - a step-by-step master class

An original and high-flying rocket can be assembled from scrap materials right at home. But its launch must be carried out in an open area to comply with safety conditions. He will tell you how to make a rocket out of a bottle without much difficulty. step by step photo instructions.

List of materials for making a flying rocket from a plastic bottle

  • plastic bottle;
  • sheet of plastic;
  • foam tube;
  • paper tape;
  • liquid Nails;
  • stationery knife, scissors;
  • rubber stopper;
  • thin hose.

Step-by-step master class on making a flying space rocket from a bottle


How to make a model of a space rocket with your own hands - an interesting master class with photos

Many fans of space research would like to have a real model of the original rocket at home. Using a few materials and following assembly rules, you can make a copy of the Proton-M. How to make a model of a rocket and how to paint it correctly is described in the next master class.

Materials for making a model of a space rocket with your own hands

Detailed master class on making a model rocket with your own hands


How to make a model rocket from matches and foil - an entertaining video master class

Many adults and teenagers are interested in how to make a rocket from matches and foil. The work takes minimal time but brings maximum fun. True, it must be carried out either with adults or under their supervision.

Rocket modeling is an activity that captivates not only children, but also adults and accomplished people, as can be understood by the composition of teams of athletes at the World Rocket Modeling Championship, which will be held in Lvov on August 23-28. Even NASA employees will come to compete. With rockets assembled yourself. In order to make the simplest working model of a rocket with your own hands, special knowledge and skills are not needed - there is a large number of detailed instructions. Using them, you can make your own rocket, either from paper or from parts purchased at a hardware store. In this article we will take a closer look at what kind of rockets there are, what they are made of and how to make a rocket with your own hands. So, in anticipation of the Championship, you can get your own model and even take it into flight. Who knows, maybe by August you will decide to take part in the extra-class payload rocket launching competition “Save the Space Eggs” (held as part of the Championship) and compete for a prize fund of 4,000 euros.

What does a rocket consist of?

Any rocket model, regardless of class, necessarily consists of the following parts:

  1. Frame. The remaining elements are attached to it, and the engine and rescue system are installed inside.
  2. Stabilizers. They are attached to the bottom of the rocket body and give it stability in flight.
  3. Rescue system. Necessary to slow down the free fall of the rocket. It can be in the form of a parachute or a brake band.
  4. Head fairing. This is the cone-shaped head part of the rocket, which gives it an aerodynamic shape.
  5. Guide rings. They are attached to the body on one axis and are needed to secure the missile to the launcher.
  6. Engine. Responsible for the takeoff of a rocket and is even in the most simple models. They are divided into groups according to the total thrust impulse. You can buy a model engine at a craft store or assemble it yourself. But in this article we will focus on the fact that you already have a ready-made engine.

It is not part of the rocket, but the launcher is a must-have item. It can be purchased at finished form or assemble it yourself from a metal rod on which the rocket is attached and a trigger mechanism. But we will also focus on what launcher you have.

Classes of missiles and their differences

In this section we will look at the classes of rockets that you can see with your own eyes at the World Championship in Rocket Modeling in Lviv. There are nine of them, eight of them are approved by the Fédération Aéronautique Internationale as official for the World Championship, and one - S2/P - is open not only to athletes, but to everyone who wants to compete.

Rockets for competitions or just for yourself can be made from different materials. Paper, plastic, wood, foam, metal. A mandatory requirement is that the materials are not explosive. Those who are seriously involved in rocket modeling use specific materials that have best characteristics for missile purposes, but can be quite expensive or exotic.

An S1 class rocket must demonstrate the best flight altitude in competition. These are one of the simplest and smallest rockets that take part in competitions. S1, like other missiles, are divided into several subclasses, which are designated by letters. The closer to the beginning of the alphabet, the lower the total thrust impulse of the engine, which is used to launch the rocket.


S2 class rockets are designed to carry a payload, according to FAI requirements, a "payload" can be something compact and fragile, with a diameter of 45 millimeters and a weight of 65 grams. For example, a raw chicken egg. A rocket can have one or more parachutes, with the help of which the payload and the rocket will return to the ground safe and sound. S2 class rockets cannot have more than one stage and they must not lose a single part during flight. The athlete needs to launch the model to a height of 300 meters and land it in 60 seconds. But if the cargo is damaged, the result will not be counted at all. So it's important to strike a balance. The weight of the model with the engine should not exceed 1500 grams, and the weight of the fuel components in the engine should not exceed 200 grams.

S3 rockets may look exactly like S1 rockets to the uninitiated, but their competition goals are different. S3 are rockets for the duration of descent using a parachute. The specificity of the competition in this class is that the athlete needs to carry out three rocket launches, using only two rocket models. Accordingly, at least one of the models still needs to be found after launch, and they often land several kilometers from the launch zone.

For models of this class, parachute diameters usually reach a diameter of 90-100 centimeters. Common materials are fiberglass, balsa wood, cardboard, the nose is made of lightweight plastic. The fins are made of lightweight balsa wood and can be covered with fabric or fiberglass.

The S4 class is represented by gliders that must remain in flight for as long as possible. These are “winged” devices, whose appearance quite seriously different from what can be expected from a rocket. They rise into the sky using an engine. But it is forbidden to use anything in gliders that will give them acceleration or in any way affect soaring; the device must stay in the sky solely due to its aerodynamic characteristics. The materials for such rockets are usually balsa wood, the wings are made of fiberglass or foam, and balsa wood too, that is, everything that weighs almost nothing.

The S5 class of rockets are copy rockets, their flight goal is altitude. The competition takes into account not only the quality of the flight, but also how accurately the participant was able to replicate the body of a real rocket. These are basically two-stage models with a massive launch vehicle and a very narrow nose. They usually go towards the sky very quickly.

S6 class rockets are very similar to S3 class rockets, but they eject a drag band (streamer) during flight. In fact, it serves as a rescue system. Since rockets of this class must also stay in the air for as long as possible, the competition participant’s task is to create the lightest and at the same time strong body. Models are made from parchment or fiberglass. The bow is made of vacuum plastic, fiberglass, paper, and the stabilizers are made of lightweight balsa wood, which is coated with fiberglass for durability. Belts for such missiles are usually made of aluminized lava. The tape should flap intensively in the wind, resisting falling. Its dimensions usually range from 10x100 centimeters to 13x230 centimeters.

S7 class models require very painstaking work. Like the S5, these models are multi-stage copies of real rockets, but unlike the S5, they are evaluated in flight by how plausibly they replicate the launch and flight of a real rocket. Even the colors of the rocket must match the “original”. That is, this is the most spectacular and difficult class, don’t miss it at the World Model Rocket Championship! Both juniors and adults will compete in this class on August 28th. The most popular rocket prototypes are Saturn, Ariane, Zenit 3, and Soyuz. Copies of other rockets also take part in competitions, but as practice shows, they usually demonstrate worse results.

S8 are radio-controlled cruise missiles. This is one of the most diverse classes; the designs and types of materials used differ significantly. The rocket must take off and make a gliding flight within a certain time. Then it needs to be planted in the center of a circle with a diameter of 20 meters. The closer to the center the rocket lands, the more bonus points the participant will receive.

The S9 class are rotorcraft and they also compete against each other in terms of time spent in flight. These are lightweight models made of fiberglass, vacuum plastic and balsa wood. Without an engine they often weigh about 15 grams. The most intricate part of this class of rockets are the blades, which are usually made of balsa and must have the correct aerodynamic shape. These rockets do not have an escape system; this effect is achieved due to the autorotation of the blades.

At competitions, rockets of this class, as well as classes S3, S6 and S9, must have a diameter of at least 40 millimeters and a height of at least 500. The higher the subclass of the rocket, the larger its dimensions must be. In the case of the most compact S1 rockets, the body diameter should not be less than 18 millimeters, and the length should not be less than 75% of the length of the rocket. These are the most compact models. In general, each class has its own restrictions. They are set out in the FAI (Fédération Aéronautique Internationale) code. And before flight, each model is checked to ensure it meets the requirements of its class.


Of all the rockets taking part in the current Championship, only the models of the S4, S8 and S9 classes are required to ensure that none of their parts separate during flight, even on the recovery system. For others this is acceptable.

How to make a simple and functional rocket model from scrap materials

The easiest rockets to make at home are the S1 class, and the S6 class is also considered relatively simple. But in this section we will still talk about the first. If you have children, you can make a model rocket together or let them make it themselves.

To make the model you will need:

  • two sheets of A4 paper (it is better to choose a multi-colored one so that the rocket looks brighter, the thickness of the paper is approximately 0.16-0.18 millimeters);
  • glue;
  • polystyrene foam (instead, you can use thick cardboard from which boxes are made);
  • a piece of thin polyethylene, at least 60 cm in diameter;
  • ordinary sewing threads;
  • stationery eraser (as for money);
  • rolling pin or other object of a similar shape, the main thing is that with smooth surface and with a diameter of about 13-14 centimeters;
  • a pencil, pen or other object of a similar shape with a diameter of 1 centimeter and another with a diameter of 0.8 centimeters;
  • ruler;
  • compass;
  • engine and launcher if you plan to use the rocket for its intended purpose.

In the drawings, of which there are a lot on the Internet, you can find rockets with different ratios of the length and width of the body, the “sharpness” of the head fairing and the sizes of the stabilizers. The text below shows the dimensions of the parts, but if you want, you can use other proportions, as in one of the drawings in the gallery below. The procedure still remains the same. Look at these drawings (especially the last one) if you decide to assemble the model according to the instructions.



Frame

Take one of the stored sheets of paper, use a ruler to measure 14 centimeters from the edge (if your volume is not as large as ours, just add another couple of millimeters to your figure, they will be needed to glue the sheet together). Cut it off.

Roll the resulting piece of paper around a rolling pin (or whatever you have). The paper should fit perfectly to the object. Glue the sheet directly on the rolling pin so that you get a cylinder. Let the glue dry while you begin making the head fairing and tail section of the rocket.

The head and tail of the rocket

Take a second sheet of paper and a compass. Measure 14.5 centimeters with a compass and draw a circle from two diagonally located corners.

Take a ruler, place it on the edge of the sheet near the beginning of the circle and measure a point on the circle at a distance of 15 centimeters. Draw a line from the corner to this point and cut out this section. Do the same with the second circle.


Glue cones from both pieces of paper. Trim the top of one of the cones by about 3 centimeters. This will be the tail section.

To glue it to the base, make cuts on the bottom of the cone approximately every centimeter and 0.5 centimeters deep. Bend them outwards and apply glue to inner side. Then glue it to the rocket body.

To attach the head fairing, you need to make a “ring”, thanks to which it will be attached to the base. Take a sheet of the same color that you used for the base and cut out a 3x14 centimeter rectangle. Roll it into a cylinder and glue it together. The diameter of the ring should be slightly smaller than the diameter of the base of the rocket so that it fits perfectly into it. Glue the ring to the rocket head the same way you glued the base (just don't cut anything off the cone this time). Insert the ring with the other side into the base of the rocket to check if you got the diameter right.


Let's go back to the tail section. The rocket needs to be stabilized and a compartment for the engine must be made. To do this, you need to again take the paper from which you made the base of the rocket, cut out a 4x10 cm rectangle, find an oblong and round object with a diameter of about 1 cm and wrap a piece of paper around it, having previously smeared glue over the entire area so that you end up with a dense multi-layer cylinder . Make 4 mm cuts on one side of the cylinder, bend them, apply glue to the inside and glue them to the tail section.

The rocket must have stabilizers at the bottom. They can be made from thin sheets of foam or, if you don’t have it, thick cardboard. You need to cut out four rectangles with sides 5x6 centimeters. From these rectangles, cut out the clamps. You can choose any shape at your discretion.

Please note that the head fairing, tail cone and engine compartment must be aligned exactly along the longitudinal axis of the body (should not be tilted away from the body).

Rescue system

In order for a rocket to return smoothly to the ground, it needs an escape system. This model is about a parachute. Ordinary thin polyethylene can act as a parachute. You can take, for example, a 120-liter bag. For our rocket, you need to cut a circle with a diameter of 60 centimeters in it and secure it to the body using slings (length approximately 1 meter). There should be 16 of them. Strong threads are suitable for the role of slings. Attach the lines to the parachute using tape at equal distances from each other.

Fold the parachute in half, then in half again, then squeeze it.

To secure the parachute, take another thread, the length of which should be twice the length of the body. Glue it to the engine compartment between the two stabilizers. Tie an elastic band to the thread in two places, so that if you pull the thread, the elastic band will stretch, and the thread will limit the stretching (recommendations: tie the elastic band to the thread at a distance of 5 centimeters from the top edge of the body).

Before stowing the parachute in the rocket, you need to place a wad. For example, a piece of cotton wool (or soft paper, napkins) can act as a wad. Make a ball out of the material you like and insert the rockets inside. If you have talcum powder, sprinkle it with talcum powder to prevent possible fire from the charge. The wad should not be inserted tightly, but the amount of cotton wool should be sufficient to push out the rescue system.

Insert it inside the rocket, then put the parachute and lines. Carefully use rings so that they don’t get tangled.

A streamer can also act as a rescue system, and if you want to make an S6 class rocket, then you can see how to lay it down and tie it down in these photographs.









Attaching to the launcher and launching

Cut out two rectangles 1.5 x 3 centimeters. Twist them into a cylinder with a diameter of approximately 0.8 centimeters so that the launcher mount fits freely through these cylinders. Glue to the base of the rocket on one axis at a distance of a few centimeters from the top and bottom of the base.

Install the engine into the engine bay. Ready to go!

To start, you need a metal rod with a length of at least a meter and a diameter of 4-5 millimeters. It must be strictly vertical to the ground. Regardless of any conditions, the end of the rod must be at a height of at least 1.5 meters from the ground to avoid injury to the eyes.

Never try to launch a rocket at home! Even such a seemingly innocent device can cause a lot of trouble indoors. The distance from the launch site to the nearest houses must be at least 500 meters.

After igniting the engine, move away from the rocket at least 3-5 meters. Spectators, if any, should be at a distance of 10-15 meters. If you plan to entrust the launch to a child under 16 years old, be sure to be close to him.

P.S.

Despite the fact that making the simplest paper rocket is not at all difficult, rocket modeling is a serious and interesting view a sport that requires a lot of work and a lot of time. And also very spectacular. Against the backdrop of growing interest on the part of private companies in space exploration, popularizing this topic among the population, especially children, is extremely promising. After all, those who have been attracted to space since childhood are more likely to choose it as a field of activity in adulthood. If in Ukraine several decades ago the topic of space had not been so popular among children, then it would be unlikely that now in our country there would be people and companies like those who invest money in such a promising industry as space. An event on the level of the Model Rocketry World Championship could not take place - because there would be no strong teams and no great desire to stir up interest in the industry among future generations. We have already written about how interesting the Championship promises to be. There, by the way, it will be possible to assemble the rocket yourself from ready-made parts. Come to Lviv and see everything with your own eyes. Detailed information information about the event can be found on its

Making rockets with your own hands from scrap materials is a popular hobby among residents of Western countries. In Russia, home “rocket science” is not in such high demand, but even here we meet enthusiasts. And in most cases, these are not students of technical specialties, but parents of little fidgets and young dreamers. Only loving mothers, dads and creative teachers-educators know how to make a rocket with their own hands from paper, cardboard, bottles, so that it not only involves kids in space trip, but also took off spectacularly. Using diagrams and models, brave experimenters will make a rocket that flies out of matches and foil. Don't believe me? Experience our master classes with photos and videos for yourself!

How to make a space rocket with your own hands from scrap materials - a step-by-step master class for children and parents

To give your child a new exciting toy, you don’t have to visit stores and auctions of expensive children’s goods. You can make a bright, interesting and, most importantly, safe thing with your own hands. For example, an intergalactic rocket for entertaining role playing games and virtual travel. And our step-by-step master class“How to make a space rocket with your own hands from scrap materials” will simplify and speed up the collective creative process of parents and children.

Necessary materials for a rocket from scrap materials

  • plastic bottle
  • colored terry sock
  • glue gun
  • sheet of red felt
  • thick foil
  • cardboard
  • scissors
  • red and yellow yarn
  • paper towel tube
  • thin cord

Step-by-step master class for children on creating a space rocket from scrap materials

  1. Empty plastic bottle wash with warm water and dry. Place a colored sock over a clean, dry container. Tie it with a thin cord under the bottom of the bottle and cut off the tail.
  2. Cut out two circles with a diameter of 5 cm from red felt. Glue the figures onto the finished base of the rocket, imitating portholes. On the red circles, use a glue gun to secure the same round parts made of thick foil, but with a smaller diameter. Approximately - 3.5 cm.
  3. Draw three “fins” on a piece of white cardboard. Cut out the shapes and glue them point down to the rocket on three sides.
  4. Cut a ring 5-6 cm wide from a cardboard tube (from toilet paper or paper towels). Wrap the piece in thick foil. Wind the red woolen threads around your palm, then glue the resulting skein on one side to the previously prepared part.
  5. Do the same with yellow yarn. This way you can make the lower part of the rocket with decorative flames. Secure the part with a glue gun to the bottom of the bottle. This completes the step-by-step master class for children and parents “How to make a space rocket with your own hands from scrap materials”!

How to make a bright rocket out of cardboard and paper with your own hands - diagrams and models

If preschoolers are delighted and delighted by a small toy rocket, the size of a bottle, then older children will love the “full-length” spacecraft. Your own intergalactic ship will allow younger schoolchildren feel like real captains and show courage, bravery and bravery as the main traits of a man’s character.

How to do it right large model DIY rockets made of paper and cardboard for a child, see the next master class with diagrams, photos and videos.

Necessary materials for a DIY paper and cardboard rocket model

  • carton boxes
  • colored paper
  • yoghurt cups
  • disposable plates
  • plastic covers and buttons
  • letters and numbers on adhesive backing
  • bobbins of thread
  • flower pot
  • foam circle and pieces of fabric
  • letter stencils
  • markers
  • scissors
  • pencil
  • satin ribbons
  • thick foil
  • glue gun

A simple diagram of how to make a rocket model from cardboard and paper with your own hands

  1. Start creating a bright rocket with the help of the kids. Let children help you with their favorite toy tools. Use a large household appliance box as the base of the rocket. Ideally, from the refrigerator.
  2. Make the top of the rocket out of painted flower pot, disposable tableware and plastic spools of sewing thread. Decorate the details with pieces of satin ribbons and voluminous stars made of colored paper.
  3. Cut a round window in the front wall of the rocket. Wrap the foam circle in multi-colored satin ribbons and glue it to the panel in place of the porthole. Glue a few spools of thread a little higher and mark them with adhesive numbers. This will make it easier for the little pilot to count down the time before launch. Below the window, place another instrument panel to make the rocket more interesting.
  4. On the right side of the space rocket, equip the fuel tank lid with bright plastic buttons. Plastic bottle caps, thread spools, and old buttons from various devices will be useful for this.
  5. Don't forget about the front door. Draw a large oblong rectangle on the back wall of the rocket and cut three sides (bottom, top and right). Remaining left-hand side will serve as a curtain. Decorate the captain's door with decorative elements.
  6. Draw two “legs” on thick cardboard, cut out the parts and cover them with foil. Fix the elements on the bottom of the right and left walls of the rocket. At this point the spacecraft is ready. For a clear picture of how to make a bright rocket out of cardboard and paper with your own hands, see the model diagram.

How to make a rocket with your own hands so that it flies - step-by-step instructions with photos and videos

Even using the most primitive waste materials(candy boxes, cardboard napkin tubes, etc.), you can make an unusual rocket with your own hands that will fly. Of course, she will not be able to surf the expanses of the universe, but she will boldly go on a journey through the children's room. Take advantage of our step by step instructions with photos and videos to make a nice gift for your kids for the significant Cosmonautics Day.

Necessary materials for a DIY flying paper rocket

  • paper towel tube
  • thick cardboard
  • scissors
  • pencil
  • brushes and gouache paints
  • permanent marker
  • yarn
  • drinking straw

Step-by-step instructions with photos and videos for creating a flying rocket with your own hands


How to make a simple bottle rocket with a launcher to make it take off

If the kids have grown up a long time ago and are no longer interested in toy models made of cardboard, invite them to make a simple rocket with a trigger mechanism that can fly high and impressively. Rest assured, the trick of launching a spacecraft will cause wild delight even in an adult. What can we say about impressionable teenagers?

Materials needed for a simple bottle rocket with launcher

  • thick cardboard
  • thin cardboard
  • scotch
  • plastic bottle
  • plasticine
  • wine stopper
  • pencil
  • scissors
  • Bicycle Pump

Step-by-step instructions for creating a simple rocket with a trigger mechanism

  1. Roll a sheet of thin cardboard into a cone. Trim the edge to make the shape even.
  2. Cover the finished cone with colored tape, this will increase its resistance to water.
  3. Wash and dry the empty bottle. Paint the container in any color, if desired, draw an emblem or leave an inscription.
  4. Glue the main part of the rocket - the cone - with liquid silicone to the bottom of the bottle. Try to make the structure as smooth as possible.
  5. Cut out 3-4 right triangles from thicker cardboard. Glue the parts to the bottle. This will give the rocket tail fins. Ideally, the “legs” should end at the level of the extreme point of the container neck.
  6. Weight the bottom of the rocket. To do this, wrap a piece of plasticine around the neck of the bottle and disguise the load with adhesive tape.
  7. Pour 1 liter of water into the bottle.
  8. IN wine cork Make a thin hole with a needle. The hole size should not exceed the diameter of the bicycle pump needle.
  9. Carefully insert the cork into the neck of the bottle. Insert the bicycle pump needle firmly so that it does not pop out.
  10. Take the rocket with the neck up and connect it to the pump. Turn the spacecraft over and position it so that it does not fly towards you.
  11. Hold with your hand and inflate the rocket with air. Then release the craft and continue pumping air. A simple bottle rocket with a launcher will take off as soon as the cork can no longer hold the pressure.

How to make a rocket from matches, foil and other improvised materials with your own hands according to video

And for those who want to remember a fun and carefree childhood, being already old enough, we have prepared another master class with a video on making a flying rocket from matches, paper clips and foil. This time you won’t have to make crafts from cardboard, paper, bottles and other scrap materials. It is enough just to remember that very simple model that flies, and carefully reproduce it, observing safety precautions. And if you remember step by step instructions If you can’t do it, watch the video “How to make a rocket from matches, foil and other materials with your own hands.”

The “Rocket” craft will become the perfect gift on a holiday such as Defender of the Fatherland Day, or April 12. Photos of various rocket crafts can be viewed on the Internet. Familiarization with several options for this type of crafts will allow you to use your imagination and create a real masterpiece.

Paper rocket

If you don’t know what a rocket can be made from, it is recommended to turn your attention to paper. The paper composition is distinguished by the fact that even children aged five years and older can make it. The presented product can act as a gift to relatives.

Try to make a rocket with your children, developing your eye, visual memory, and generally getting closer to the kids.

The process of creating a paper rocket includes the following manipulations:

First of all, you need to fold it carefully paper sheet, getting a rectangle. One half of the rectangle is folded to form a cylinder.


Do not forget that the edges will need to be carefully trimmed in a circle, this is done so that in the end the structure will be more stable.

Taking three squares and using scissors, you need to make a porthole. If children are creating a craft, then you need to remind them that they need to use cutting tools carefully.

All that remains is to glue the resulting porthole to the existing cylinder. Next you need to move on to assembling the rocket. When the bow part is secured, you can move on to decorating the “tail” of the product.

Such a simple master class on making a rocket will allow you to see for yourself that there is nothing complicated in creating such a composition.

This leads to the fact that, if desired and with the proper approach, you can always create spaceship with your own hands, and your children will be happy to help you.

Origami rocket - beautiful and original

This composition really looks unusual; if you want to create it, you need to put in a minimum of effort, spend a little time, remembering to use your imagination, showing your refined taste. We make a rocket with our own hands step by step so as not to miss a single detail.

Such a composition can be an excellent solution for such a holiday as Cosmonautics Day; for example, it is quite possible to perform it using technology modular origami. Older children will be able to independently implement the presented idea.


The creation of crafts is carried out according to the following plan:

At the very beginning, you will need to prepare paper squares, each of their sides should be ten centimeters. The square is folded so that the result is two rectangles and four squares.

It is important to note here that the four corners must be carefully bent towards the center, after which the figure is turned over, the corners are folded strictly towards the middle. As a result of such elementary manipulations, you can create a “star in a square”.

Next, you need to insert the already created modules into each other, carefully gluing them together. At the moment when you have glued the bottom row, you can glue three more rows on top, connecting the body as a whole. Do not forget that any manipulations must be carried out carefully, only then will it be possible to achieve the same composition as a result.

But you can’t imagine a rocket without a nose, so start creating it, there’s nothing complicated here. All you have to do is collapse paper cone, this is done easily and simply.

If necessary, or if desired, you can always make legs that are glued to the base of the module. By performing such simple manipulations, you can enjoy the fact that in the end you will have an original rocket.

Now you are familiar with the instructions on how to make a rocket with your own hands, and you have personally been able to verify that there is nothing complicated here. Therefore, by helping your children, together you will be able to create a real masterpiece that can be presented to family, relatives, and friends.

Plasticine rocket

You can always make a spaceship out of plasticine. It should be noted that this option is famous for developing fine motor skills baby, this activity is useful both for attention and perseverance, which will definitely need to be taken into account. But in general, such an activity can definitely attract children to love creative activities.

Kids must independently choose the piece of plasticine that they like best, rolling it on a piece of paper and creating a small oval. Next, the oval is transformed into a long sausage; it needs to be divided into 4 parts, since these will be the legs. To create a door, an oval is rolled up and attached to the bottom of the “homemade product”.

What do you need to know?

Making a rocket from scrap materials is interesting and useful activity which children love. The main task of parents is to provide them with this by giving them such an opportunity, so it is worth treating this issue comprehensively and responsibly.

Photos of rocket crafts

In preparation for Cosmonautics Day, during labor lessons the kids and I made something like this simple craft- a paper rocket. And not just a rocket, but also with a passenger! It only took about half an hour - absolutely everyone did it!

For work we will need the following materials:

  • colored cardboard and paper,
  • scissors,
  • glue stick,
  • pencils,
  • white thick paper.

How to make a paper rocket:

1. As in other crafts with children (for example, in) we use the most simple materials: paper, glue, scissors and, if necessary, pencils.

2. Cut out two rectangles: red from cardboard (10*12 cm), yellow from colored paper (10*8 cm).

3. Cut out another 10*6 cm rectangle from white paper.

4. In the cardboard - this will be the rocket itself - cut out a round window.

5. C reverse side Glue a white sheet of paper onto the cardboard. Attention! We glue it only on three sides along the edge (drawn with a green pencil), having previously cut the fourth side in a semicircle inward, we do not glue it!

6. From the front side you get a porthole like this.

7. Glue the cardboard with a tube using a glue stick. Press tightly with your fingers so that the cardboard does not come apart.

8. The result is a cylinder like this.

9. Now cut out a semicircle from yellow paper.

10. Glue it together with a cone.

11. Cut 4 strips of the same yellow paper measuring approximately 1*4 cm (can be a little shorter).

12. Lubricate them with thick glue and glue the rockets inside - pieces of yellow paper smeared with glue remain on the outside.

13. We glue the roof to them,

14. Now the rocket is almost complete. The only thing missing is support legs for it.

15. For them, cut out three rectangles 3*4 cm.

16. We fold each of them four times across.

17. When unfolded, it turns out to be five parts.

18. Lubricate the two outer parts with glue and fold them into a three-dimensional triangle.

19. Glue them onto the rocket, greasing only one side on the outside. It will help to glue them with a triangular pencil - we push it inside, put the leg on the outside and press it from the inside of the rocket with a finger.

20. By gluing all three legs, we get a real rocket - a great DIY gift for Cosmonautics Day!

21. Now we need an astronaut to fly on it. We chose Pina - one of the heroes of the cartoon "Smeshariki" - in one of the episodes he was flying on a rocket to his BBC to the moon. Print out the reduced image or draw with pencils. The size must be such that it fits into the window of our rocket.

22. Place the pin on a rectangle of white paper, slightly longer than the rocket at the very top.

23. We push it inside the rocket between the cardboard and the glued white sheet of paper.

24. The astronaut’s head should soon appear in the window. We bend the remaining tip of the paper inward - it can be pulled out at any time and landed on the Moon.

25. Now you know how to make a paper rocket with your own hands. It's very simple and effective.

Try making it with your children - you will definitely succeed!