How to knit leg warmers for a child. Knitted leg warmers: various knitting methods. Video tutorials: Leg warmers with a pattern of plaits and braids

Gaiters are a knitted, leather or cloth overlay that is worn over shoes, leaving only the sole exposed.

History of spats

If you look back, gaiters were originally made of leather. The leather was rough and tanned. Such gaiters performed an exclusively protective function, preventing leg injuries during combat operations or saving the skin from wounds in impenetrable forests.

You can compare leggings to stockings, only without soles. Initially, the leggings themselves were called gaiters or shanks, as well as boots.

In the 17th-18th centuries, such clothing was popular among both men and women. Women's versions have become more beautiful over time, decorated with embroidery and patterns, while men's have remained laconic. However, at the peak of popularity big difference there was no difference between a female and a male pair - they were all made of coarse cloth of light gray or beige color and trimmed with a row of buttons along the edge of the canvas.

Who uses gaiters

A new surge in the popularity of leggings occurred in 1970. At this time, everything related to the fashionable trend - aerobics - was in special demand. Colorful and bright warm leg gaiters that do not restrict movement instantly won hearts female half population.

Dancers and professional gymnasts actively use this accessory to keep the working part of the leg warm. Before training, to warm up the muscles, gaiters of the required length are put on, which are removed after some time.

Travelers all over the world also appreciate the functionality of the gaiters. Made from waterproof and windproof modern materials, they perfectly protect shoes and open areas of the leg (for example, between the boot and the cuff of trousers) from the piercing wind and rain.

If previously gaiters performed the protective function of the legs for the military, now this role is assigned to the high tops of boots. Essentially, the shaft is a gaiter attached to the last of the boot.

The largest percentage of leggings consumers are young girls. In 2004, leg warmers regained their former popularity. The progress that has occurred over the years of their absence allows us to invent and produce any models - knitted, knitted, decorated with patterns, stones, decorative bows or beads.

Knitted leg warmers

Peasants were the first to wear knitted leggings. They were worn over pants, tied at the knee with an elastic band. Easy to remove, easy to clean without staining your main clothes.

To knit leg warmers with knitting needles, you don’t have to look for long diagrams and descriptions. A bunch of variety of ideas are offered for every taste. When choosing a pattern for knitted leg warmers, you need to determine what clothes they will be worn with. For example, leg warmers with a jacquard pattern will look better with clothes in laconic shades, pairing well with accessories in the same style.

To knit leg warmers with a jacquard pattern without a toe and heel, you will need threads of two colors - green and white (or black). The composition of the thread should not be synthetic, otherwise the legs will be uncomfortable and an allergic reaction may occur. If the leg warmers are knitted for cold weather, natural wool thread is best.

You need circular knitting needles, their size should correspond to the thickness of the thread. Recommendations for choosing knitting needles are on the yarn packaging of any manufacturer.

Description of knitting

To knitted leg warmers(knitting needles), diagrams and descriptions of which are attached, turned out to be the right size, you need to measure the circumference of the leg at the ankle and the circumference of the leg at the calf at the widest part with a measuring tape. Measurements are taken according to the model - short ones only cover the ankle, tall ones can reach the very knee. If the selected model will be worn over shoes, measurements must be taken along the part of the leg in the shoe.

How to knit leg warmers with knitting needles if the difference in girth is large? To do this, you will need to add stitches at the beginning and end of the row.

After the measurements and calculations have been made, we begin to set the loops. The number of loops is cast on the knitting needles so that the length of the resulting chain is equal to the girth in centimeters. Next, the knitting process itself begins.

The jacquard pattern is knitted along the front side, in rotating rows; on the back side, the pattern is read symmetrically - instead of green, a white thread is used, and vice versa. The unused thread is pulled inside the loops. It is important to take this into account when purchasing yarn - consumption with the jacquard technique increases almost 2 times. All stitches are knitted.

To ensure that the leg warmers, knitted on two knitting needles, sit tightly on the leg and do not slip off, the work is completed with 7-10 rows of classic English elastic. The first loop is removed, knit, purl. So until the end of the row. The latter is knitted purlwise. The work turns over and the knitting proceeds as the loops look.

Once the elastic band is completed, the loops are closed.

Sew the fabric with a light-colored thread using a knitting needle or a needle with a blunt end, being careful not to separate the yarn fibers.

Knitting on 4 needles

How to knit leg warmers with knitting needles so that you don’t have to sew them? The best option is knitting on 4 needles using the hosiery method.

Knitting starts from the top. Knitted with a 5 cm pattern " English gum", then begin to form the leggings pattern. If they have a relief and voluminous pattern, then start knitting it, but if there is no special pattern, then you can knit the entire legging with an elastic band.

To knit a leg warmer with braids, the number of loops is a multiple of 4. Then these loops are evenly distributed onto 4 knitting needles so that there are no gaps between the distributed loops. The first and last loops participate in the formation of the pattern; they are knitted not with edge loops, but according to the pattern.

To knit bright leg warmers with a braid pattern, you need to use melange-colored yarn and a set of stocking needles.

Cast on a number of loops equal to the circumference of the leg at the top of the gaiters (calf). For medium calf sizes, cast on 60 stitches.

Now the first row is knitted using four knitting needles. Take the first knitting needle, knit 15 stitches with it, the next 15 with another knitting needle, the next 15 with a third knitting needle, and the remaining ones with a fourth knitting needle. The fifth knitting needle is taken as a working one.

The bright leg warmer is knitted with a “braid” pattern.

  • 1st row: 1 purl, *knit 4, purl 2*, at the end 1 purl;
  • 2nd and all even rows: according to the picture;
  • 3rd row: 1 purl, *knit 4, purl 2*, at the end 1 purl;
  • 5th row: purl 1, * 4 loops are crossed to the left (2 loops are removed on auxiliary knitting needle before work, 2 loops are knitted with knit stitches, then loops with an auxiliary loop are knitted with knit stitches), 2 purl stitches *, at the end - 1 purl stitch;
  • 7th row: repeat from 1st row.

In order for the product to fit well to the shape of the leg, smooth additions and decreases of loops are made in the areas of the shin, calf, and ankle.

By experimenting with knitting patterns, you can make the braid asymmetrical - knit one strand narrow, of 2 loops, and the second wide, of 6 or more.

Gaiters on 4 knitting needles have a distinctive feature from those knitted using 2 knitting needles - they do not have a seam. In some cases it is necessary, and in some cases its absence is only a plus.

Leg warmers for children

This is a comfortable uniform for children. When it’s already quite warm outside, but there may still be sudden changes in the weather, such an accessory will come in handy.

To knit leg warmers for a girl or a boy, you need to choose a yarn that is not too scratchy so that the child can walk comfortably in them. Children's leg warmers are best knitted using jacquard patterns. The design can be completely different - boats or anchors, balls are suitable for boys. The best color to use is dark - blue, green, brown. Knitted leg warmers for girls can be knitted with threads of bright and cheerful colors, with a pattern of hearts or flowers.

For children's leg warmers, a simple pattern is suitable.

The pattern is knitted according to the pattern where:

  • I - knit 1 knit;
  • O - 1 knit, 1 purl;
  • ~ - purl 3 together;
  • W - 3 loops from one.

Leg warmers for men

You can knit men's leg warmers using the same pattern as women's ones. Plain high leg warmers in green, bottle or blue shades suit men well; the pattern should not be too delicate. Young guys like to wear mid-height leg warmers with high, rough boots.

To knit men's leg warmers, you need to cast on the required number of loops. Next, 3 rows of elastic 1 x 1 or 2 x 2 are knitted. After the elastic, they begin to form the pattern.

The simplest pattern is “tangle”. It is well suited for a men's wardrobe, as it is quite laconic, but at the same time interesting.

The pattern is knitted very simply - first row - alternating stitches: knit - purl. So until the end of the row. The first and last loops are edge loops.

The second row is knitted the same way as the first: knit - purl.

Each row starts like the first. In this case, both the wrong side and the front side are knitted in exactly this way. Due to the fact that above each loop a loop is knitted, the opposite of the working one, the pattern turns out to be a little confusing.

Leg warmer decoration

Having knitted the leg warmers to the end, you can put the diagrams and description aside and start decorating the accessory. To do this, you can crochet the edge of the product, forming a beautiful and openwork border or flounces. In addition, to knit leg warmers, patterns and descriptions can be taken from different sources. And if you experiment, you can knit a product that is unique and unlike others.

Knitted leg warmers are a thing from a woman's or children's wardrobe. You can knit a model yourself that you will definitely like. From a wide variety of patterns, choose the one that appeals to you the most and start creating.

Knitting above the knee leg warmers with stitching is not difficult. You can play with patterns and combinations of shades. In order for the housewife to be satisfied with the result of knitting, you need to know how to do it correctly.

For beginner knitters, the process may seem complicated, but it can be learned quickly and easily. Usually knitted in two ways:

  • on two knitting needles;
  • on five spokes.

How to knit leg warmers: step-by-step diagram

  1. It will be easiest for a beginning knitter to knit on two needles. For this, a preliminary pattern is made.
  2. When the pattern is ready, you can start knitting. Calculate the number of loops. They should be taken at the rate of 4 pieces per 1 centimeter of volume.
  3. Start knitting from the top, using a two-by-two rib, knitting and purling.
  4. As a rule, the elastic band is knitted to about 10 cm, although you can choose less - it’s up to you.
  5. When you have knitted the elastic, you can start knitting patterns. You can choose from many beautiful patterns: relief waves or cells, braids, diamonds, zigzags, different patterns - anything is suitable for this accessory.
  6. When you knit the main part, do not forget to cut the loops. They begin to reduce their number from the widest part of the calf muscle, knitting two pieces together every third row.
  7. The kneeless socks are completed with an elastic band at the bottom for the same number of rows as at the top.
  8. For knitting on five needles, a slightly different step-by-step pattern is used:
  9. Cast on the required number of stitches on five knitting needles. One row is knitted with knit stitches, and the classic rib stitch continues: knit two, purl two.
  10. Unlike knitting on two needles, the product is created in the round and does not require stitching.
  11. When you reach ankle level, begin to decrease the loops little by little at the same distance. Again, finish everything off with an elastic band the same size as the top one.

According to this description, you can knit models above the knee, short knee socks on boots or socks. You can wear them on the street or in the fitness room. Mittens are knitted to match them, and they will become the same good decoration for a girl 20 years old or a girl 12 years old.

Mothers and grandmothers often want to dress up their little girls. Children's leg warmers can be worn with a dance or gymnastics costume. To knit a model for babies, you will need:

  • knitting needles;
  • centimeter;
  • yarn.

Before we start, let's calculate the loops. Basically, they calculate 4 pieces per centimeter, but their number may vary depending on the density of the knitting. To make a calculation, make a trial version.

  1. The most practical pattern is plaits. Models with harnesses for a teenager or a 10-year-old child will help in the fight against the cold.
  2. To tie legwarmers with plaits or braids, first tie an elastic band of about eight centimeters.
  3. Slip 5 stitches onto an additional needle or hook, knit the next five, and then knit the missing ones. Continue this way throughout the row.
  4. Knit several rows with stockinette stitch and intertwine the strands again. You can weave not five loops, but more or less - the more you do, the wider the braid you will get.

To ensure that leg warmers for women fit beautifully like an accordion on the leg and can be used in the cold season, it is better to choose light rather than thick yarn.

When crocheting, air loops are picked up. Their number depends on the volume of the leg. On average this is about 60 loops. If your leg is thin, or vice versa, full, or you are going to put leg warmers on your boots, you should count the number of loops. The only condition: it must be a multiple of 10.

1. We knit one row without a crochet, so the item will look neater. Next, step by step we knit the pattern with a spikelet according to the pattern:

  • three air loops;
  • volumetric column on the sixth. It is knitted like this: a yarn over is made, then a long loop is pulled out, and these steps are repeated two more times. Then all the loops and yarn overs are knitted together, and you get an air column.
  • one airborne;
  • volumetric column from the same point as the first one.

2. Repeat the pattern after two loops. So knit the entire row to the end.
3. A double crochet is made on the last stitch.
4. The second row is knitted according to the same pattern, only the fluffy column is made from connecting loops between the fluffy columns of the first row. This is how we knit the entire main length.
5. We finish knitting with a row of single crochets.

If such a pattern seems difficult for a beginning knitter, you can always try a different pattern or knit openwork leg warmers for boots. This is the main beauty of knitting - you can always choose what you like and get rid of what is not sweet to your heart. And the size can always be adjusted: make it bigger or smaller by trying on the blank to knit the perfect accessory.

Knitted leg warmers came to our daily life from sports. They are convenient for playing football, aerobics, and yoga. Leg warmers are essential for dancing. Buying leg warmers in your size can be difficult. We suggest you knit leg warmers with knitting needles. A variety of stylistic and color solutions will allow you to choose the best option for yourself. Gaiters can be knitted using thick threads simple pattern for beginner craftswomen - then they will warm your feet in frosty weather. You can knit original openwork ones, or there are models in ethno style.

Simple and warm

Let's start with the simplest model. These socks are useful for dancing and playing sports.

Their length is 40cm.

We will need:

  • thick yarn of mixed composition with a predominance of wool;
  • set of sock knitting needles No. 3.5-4.

Pattern used: rib 3k.x2p.

Knitting density: 22p. for 30r. correspond to a square of 10 cm by 10 cm.

Description

We dial 60p. and knit in a round 40cm. Close the loops according to the drawing.

Simple model: video master class

Striped

To work you will need:

  • yarn gray mixed composition (50g per 200m) – 100g;
  • dark gray yarn of mixed composition (50g per 200m) - 50g;
  • set of toe knitting needles No. 2.5.

Patterns used:

  • elastic band 2 knits x 2 purls;
  • persons satin stitch: when knitting in the round, knit all stitches;
  • openwork: knitted according to schemes A, B, C. In even rows we knit all the loops and yarn overs.

You need to repeat rapports in a row - see diagram.

Knitting density: knitting. Ch.: 30p. by 42r. correspond to a square of 10cm by 10cm, on openwork: 26p. for 42r. correspond to a 10cm by 10cm square.

Description

We dial 72p. gray threads and switch to circular knitting, distributing all the loops into 4 sp. - 18 on each. Next we knit 10 rubles. rubber bands, 1 rub. knit, 12cm openwork - pattern A (we finish with the 6th or 12th row of the pattern). Then - 5 rubles. rubber bands. Change the thread to dark gray. We knit 1 p. facial, 5 rub. rubber bands, 12cm openwork - pattern B, 5r. rubber bands. We return to gray again. We knit 1 p. with this color. facial, 5 rub. rubber bands, 1 rub. knit, 12cm openwork - pattern C (we finish with the 8th or 16th row of the pattern), 10 rubles. rubber bands. We close the loops.

Model with arans (braids) on 5 knitting needles: video master class

Leg warmers with frills

Such beauty can be knitted for both young women and children. We simply reduce children's sizes proportionally.

To work you will need:

  • gray yarn of mixed composition (50g per 130m) -200g;
  • some purple threads;
  • set of toe knitting needles No. 3;
  • hook No. 2.5;
  • additional circular knitting needles.

Description

We dial 84p. and switch to circular knitting, distributing 21 stitches. on a knitting needle. Let's knit 12 rubles. rubber bands 1l.x1p. In the next row we knit 2 stitches from each stitch. We remove each added stitch onto an additional knitting needle - we will knit frills from these loops. We continue the main knitting 3p.x1p., adding 1p. on each sleeper (i.e. we have 22 points per sp.).

Having knitted 7cm, we repeat the increase as described and remove the additional loops. sp.
Having knitted 3.5cm 3L x 1P, we begin to make decreases: in every 8th p. decrease evenly in 3 stitches, knitting from 2 stitches. one front one. Having knitted another 3.5 cm, we repeat the increase on the frills and the removal of the loops on the additional one. sp. We repeat 2 more times, 7 cm each with decreases (see above), removing the item for the frills. We get 5 frills. After the 5th we knit 12 rubles. 1L x 1P and close the loops.

Frills

Let's knit in a circle of faces. satin stitch Starting from the second day. in every 3rd r. we make increases by knitting from 1p. - three. We must knit 10 rubles, three of which with increases. Distribution of additions: for the 1st and 2nd frills we make them every 3rd row, i.e. 6 increases; for the 3rd and 4th frills - in every 3rd r., i.e. 5 increases; for the 5th frill - in every 3rd r., i.e. 4 increases. We tie the edge of the frills with purple thread in single crochet stitches. To give the product its shape, it needs to be lightly steamed.

Children's model with Lotus pattern: video mk

Leg warmers in ethno style

These knitted socks for women are made with folk Tyrolean motifs. They go perfectly with high heels.

We will need:

  • h/w yarn of black, milky, bronze, white, sand colors - 50g of each (50g per 100m);
  • sp. No. 4;
  • markers;
  • needle with a large eye;
  • buttons Ø 20mm – 14 pieces.

Dimensions in finished form: length – 53.5 cm (stretched), volume at the widest point - 35.5 cm.

Knitting density: 21p. for 28 rub. correspond to a 10cm by 10cm square. Before work, it is recommended to perform a sample according to cx. 2 – check the length.

Description

Left

We cast on 75 stitches with bronze threads and knit 32 rubles. according to cx. No. 1 with straight fabric.

Knitting the next row on the wrong side. side, mark it with a marker and close it for circular knitting. Ignore the mismatch of the pattern at the joint. A button placket will hide this flaw.

Knit faces. satin stitch 9.5 cm. Knit 5 times in cx. No. 2 20 rows of rapport, decreasing 9 times at the end of every 10 rubles. 1 p. We will have 57p left. We continue to knit 15 rubles. according to cx. No. 3 at 57p. (the first is the edge one).

Bottom cuff

Knit 4cm of elastic band 2L x 2P. Close the loops.

Button placket

On the front side, using bronze threads, starting from the bottom cuff, below the decrease line, cast on 102p. We complete the set at a height of 2.5 cm of the top drawing cx. No. 2. Having knitted 4cm strips, close the loops. Carefully sew the edges of the strip. Sew buttons at equal intervals. If you couldn’t find buttons exactly matching the color of the threads, don’t worry - you can crochet them with the necessary threads. Sew the top cuff from the inside.

Right

We will knit according to the same description, except for the strap. It is more convenient to knit it from top to bottom: that is, we start the set with 2.5 cm before the first repeat of cx. No. 2. We dial 102p. and connect according to the previous algorithm. We design the right one in the same way as the left one.

With a braid pattern: video mk

Knitted leg warmers made from “grass”

Cute little white knitted socks look very original and are easy to knit.

To work you will need:

  • plain white mixed yarn - 100g;
  • white “grass” yarn – 100g;
  • set of socks No. 3.5.

Patterns used:

  • elastic band 2 knits x 2 purls;
  • purl satin stitch: when knitting straight - in faces. rows, all loops are purl, in purl. rows - facial ones.

Description

Cast on with a smooth thread 42p. and tie an elastic band 3cm high. We switch to “grass” threads. Having knitted 2 p. from it. satin stitch, change the thread to a smooth one and knit 4p. Alternating the threads in this way, we knit 25cm in height. Then we knit 3cm 2l.x2i with a smooth thread. We close the loops. We carefully sew it together.

High model of leggings: diagram

Openwork

Dimensions: length 40cm, width 27cm, elastic band diameter at the bottom 13cm.

We will need:

  • acrylic yarn - about 200g;
  • circular sp. No. 6;
  • marker.

Knitting density: 24p. for 16r. correspond to a square 10 cm by 10 cm

Description

We start knitting leg warmers with knitting needles from the 48p cast-on. We switch to circular knitting. Place a marker at the connection point. We knit 5cm 2L x 2P.

We switch to openwork and perform 10cm according to the scheme:

1r.: *2l, 1l. for the bottom slice, 1i.* - repeat from * to * until the end of the row;

2p.:*2p.in 1p., 1n.,1l., 1p.* – repeat from * to* until the end of the row;

3R: *3L, 1P* – repeat from * to* until the end of the row;

4r.:*1l., 1n., 2l. for the bottom slice, purl 1* – repeat from * to* until the end of the row.

After this, we begin to add loops: in every 4th r. Add 1 stitch symmetrically from the marker. We do this 8 times. We end up with 64p.

Knitted leg warmers using knitting needles are a fashionable, modern accessory that can beneficially transform your leg. Today they are worn over shoes, thus, with the help different models Leg warmers can change your look. It is not always possible to choose beautiful leg warmers to suit your leg shape, and they are not sold everywhere. Therefore, the optimal solution may be to make this item of clothing yourself.

Necessary equipment and materials for work

The first thing a beginning knitter faces is the problem of choosing a material. It is best to choose yarn made from natural fibers, such as natural angora. This material will look softer on the foot, in addition, it will retain heat. The choice of yarn color depends on the pattern and color of the shoe. You should not choose bright and light colors. Bright threads will distract all attention, and light-colored yarn will quickly get dirty. When knitting, you can use one color or several.

Having a lot of free time and desire, you can knit entire sets with knitting needles! Pay attention to the ones that will be a harmonious addition to your image.

Master class for beginners on knitted leg warmers

Cast on the same number of stitches as for knitting socks. They should fit snugly to the leg, but not tighten it. In order to prevent the leg warmers from moving out with knitting needles, you need to knit 5-10 cm at the top and bottom with a classic 2 by 2 elastic band.

  1. So, we knit 10 cm of the upper elastic band. Then we knit one row with only facial loops. By the way, for convenience and absence side seam, you can take circular knitting needles or replace them with 4 knitting needles for knitting socks.
  2. Now it's time to decide on the design of the product. The classic version is leg warmers, which are knitted in stocking stitch. A more sporty option is the pattern double elastic band. For refined natures we can offer knitted leg warmers with an openwork pattern. True, in this case, they will not fit the leg, since the pattern gives them rigidity.
  3. When the issue with the pattern is resolved, it is necessary to knit a flat fabric half the height of the shin. Next, the loops begin to gradually decrease. True, in some cases you can knit straight leggings. For example, if your boots have a wide top. The decrease is made in every fourth row, every eighth loop.
  4. The decrease is continued for 5-10 cm. Then knitted straight until the length of the leggings is equal to the height of your product or shin. Then they move on to knitting elastic bands. The height of the bottom elastic band should completely correspond to the height of the elastic band at the top.
  5. Then all the loops are closed. The final touch is the processing of the upper and lower edges - they are crocheted in half-columns.

Openwork leg warmers with lacing for beginners in needlework

To knit such clothes you will need:

  • Yarn (50% wool, 50% acrylic, 250 m/100 g) - 100 g blue, 50 g light blue.
  • Knitting needles No. 2.5.
  • Facial surface: faces. row - persons. p., out. rows - purl. P.
  • Garter stitch: knit. row and purl. rows - all knit stitches.
  • Basic pattern: knit according to the pattern. Knit the purl rows according to the yarn over pattern, knit purl. loops.

Let's look at the step-by-step process of work

To begin, cast on 46 stitches on the needles and knit 6 rows in garter stitch. Next knit: 1 edge, 1 purl. p., 3 repeats of the main pattern, 1 purl. p., 1 chrome. Knit 100 rows in this way. Next, 2 rows with blue garter stitch thread, 2 rows with blue garter stitch thread, 2 rows with blue garter stitch thread, 4 rows with blue stockinette thread, 2 rows with blue garter stitch thread, 2 rows with blue garter stitch thread, 2 rows with blue garter stitch thread. Close the hinges.

Along the side edges, knit 1 row of double stitches (75 stitches), then knit according to the pattern. Use a blue thread to tie a 170 cm braid. Thread it crosswise into the resulting lacing holes in each or through one hole (see photo).

It’s not much more difficult to knit, as you can see for yourself.

Scheme:

Below you can watch video tutorials for better understanding. Enjoy watching!

Video tutorial for beginners

Be sure to check this out most interesting video from professionals.

The winter season is probably best time take the leg warmers out of the closet drawer, wash them and put them on your child to keep him warm. Children's leg warmers are all the rage right now. At the same time, if you don’t find them in stores, you can knit them with knitting needles.

This won't be that difficult to do. A little perseverance with patience, mastery of needlework techniques - and the new thing is ready. We knit the product with knitting needles and also with crochet. Those needlewomen who are just mastering this art should choose the most simple circuits. Let's look at them in this article.

Initially, measurements should be taken from children. You can knit leg warmers not only on two, but also on five regular knitting needles. It is not so easy to say which method of doing work is simpler for a less experienced needlewoman.

In the case of two knitting needles, the fabric will need to be stitched. Another option will require the ability to correctly distribute stitches with knitting needles. Regardless of this, the following measurements are required:

- leg circumference under the knees;

- calf circumference;

- calf girth;

— distance from the knee to the middle part of the calf;

— the distance between the middle of the calf to the ankle;

- the length of the product itself.

You can also knit on knitting needles without a pattern. If you have children's leg warmers that have a seam, then you need to make a pattern. Draw a small rectangle on a millimeter measure. The largest of its sides is equal to the length of the product.

The small one is identical to the calf girth. Position the figure vertically, this will make it easier for you to construct. Divide the two small sides in half and connect their middles with a line. Mark the vertical, marking the distance from the line above from the knee to the middle of the calf to the ankle.

Let's draw thin lines that will be parallel to the horizontal sides. After this, on the top line we set aside the half-circumferences of the legs under the knee from the vertical in two directions, on the next line at the top - the circumference of the shin, on the bottom there should be the circumference of the ankle. Connect the ends of the lines on all sides with small curves.

At the bottom, be sure to draw a lapel in the shape of a rectangle or an increasing trapezoid.

In the first situation, the product will cover only the upper part of the shoe, in the other - a limited instep area. Ask your children which option they like best. With these knitting needles you can create different knitted products.

The most common pattern for knitting leg warmers, which is accessible even to the least experienced craftsman, is stocking stitch. Cast on 20 stitches, knit the first row, purl the next row. Count the number of loops for each centimeter horizontally, as well as the number of vertical rows. We determine exactly how many loops you need to cast on. Vertical counting helps to accurately calculate the order of decreasing or increasing the number of loops. Knitting will not be difficult for you.

Let's consider another knitting pattern for the product, which is distinguished by its simplicity.

  1. Try initially making knitted leg warmers for your child with a knitted seam. This is very simple, because you are making a fabric, which will then need to be knitted (sewn) together.
  2. For this purpose, cast on 50 stitches on knitting needles 4 mm thick.
  3. Of these, 110 rows should be knitted. They all must be completely identical. You need to alternate a couple of front turns with a pair of purl turns.
  4. We close the loops on the last row and wash the emerging panel. This must be done so that the knitted children's leg warmers do not begin to shrink over time.
  5. At the final stage, the panel needs to be sewn together. It is best to do the work with contrasting threads, and also embroider something along the seam. Some decorate this place with ribbons and bows. You can use matching threads - then the product will be practical, but at the same time quite modest.

Now the children's leg warmers are completely ready to wear. In general, such knitted products are very unpretentious to create. You can make them with the most ordinary knitting needles. We just knit as carefully as possible, because you are doing all this for children.








Watch the video of knitting leg warmers: