In the book by R.I. Egorova “Learn to Sew” there is a detailed explanation of the construction of a trouser pattern. I won’t reinvent the wheel or rewrite anything, I’ll just post screenshots from the book. In my opinion, old sewing books are much better than modern sewing techniques. Also at the end of the article there is a very good video, where the entire technology of sewing trousers using ready-made patterns is clearly described.

I also suggest downloading trouser patterns for two options. The first trouser pattern is designed for size 46, and the second for 38. Attention! European sizes. The size chart is shown below.

Pattern of trousers under the photo

Trouser pattern - option No. 2

For sewing you will need:

• Light trouser fabric
• Elastic belt for the belt (if you still prefer it).
• Pattern.

Pants pattern size 46 (size chart above)

How to sew trousers with a drawstring (elastic band)

The upper part of the trousers can be decorated in different ways: make a belt fastened with a button or sew in a zipper. But the simplest option is to sew trousers with an elastic band (or a drawstring). Such option will do even for beginner craftswomen. Below are master classes with three ways to decorate a belt using an elastic band. And don’t pay attention to the fact that there is a lot of sarcastic ridicule around simple trousers with elastic. But at the same time, if you look into the wardrobes of lovely ladies, then, probably, everyone will have such pants, or at least every second one.

Fold the top with elastic and stitch it

I think that all the prejudices about such trousers are so stupid! I agree that they are not suitable for some situations, but in our lives there are no things that could be worn always and everywhere. In addition, the life of each of us is not continuous trips to theaters, operas and top fashion houses, where we should dress appropriately. We all have a favorite home, cottage and a bunch of other places where simple and comfortable trousers with an elastic waist would be appropriate. For example, when going on vacation, you won’t take an office suit with you, and a simple walk in the park with your baby will be more comfortable in light casual clothes.

It should be noted that no less important role plays about what the item will be made from. It is recommended to sew drawstring trousers from silk satin, in which case you can get wonderful pajama-style trousers. And if you take into account the experience of other craftswomen, you can sew models from chiffon, cotton linen, staple, poplin, viscose and other fabrics using this pattern. Such a thing can be useful not only at home, there are even options for going out.

What to wear with pants with elastic (tie)

To further motivate you to sew these trousers, I want to show and tell you what you can combine them with.

The most common option is tops, T-shirts and T-shirts. The main rule is harmonious combination fabrics. So, if you decide to sew trousers from chiffon, then it is better to wear them in the future with a chiffon top.

Options made from denser fabrics go well with items made from light knitwear - tops, cardigans. They would also be good company jeans jackets and shirts.

It is better to choose low-cut shoes - ballet flats, slippers, moccasins, sneakers, sandals and sandals.

It is difficult to imagine a modern wardrobe, not only for men, but also for women, without trousers. A huge variety of styles and materials allows you to always look stylish, fashionable and attractive. Not only can you buy trousers, but needlewomen have the opportunity to sew them, and even if you don’t have professional skills, but you have a pattern for trousers, you will definitely have a new beautiful thing in your own wardrobe or for family members.

Pattern of sports trousers

Having measured the exact dimensions and made the correct calculations, you can make a pattern, which will then not be difficult to update your wardrobe with. But at the same time, still introducing new details so that this product is distinguished by its individuality. All that remains is to carefully transfer the pattern of the pants onto the fabric, and then sit down to sewing.

Sweatpants are indispensable clothing in gyms, at home, on personal plot, on hikes. Knowing how to sew them, you can learn how to sew pajama pants. Since these trousers are usually worn to work, exercise or travel, they are subject to a lot of stress, and very often you need to purchase new ones. But the old ones can be ripped open - and there will be a finished pattern sweatpants. But assembling them correctly will also require skill.

Required measurements

However, before cutting, you should measure your waist, hips, and the required leg length. When calculating the amount of fabric, you need to take into account the volume of the hips: if they are less than the 100-centimeter mark, then the material is required along the length of the trouser leg. The length of the trousers is measured to the floor, and if there is an idea to stretch an elastic band along the bottom, you need to add about 10 cm more.

If the fabric is very thin, then, for example, with a width of 110 cm, the width of the trouser legs should coincide with the width of the material, and in length - with the total length of the product, multiplied by two.

The layout must be done taking into account the stretchability of the fabric. If the material is of such quality that there is no threat of stretching it over time, you can cut it as it is convenient. This primarily applies to synthetic fabrics.

But natural fabrics require a certain cutting - along the warp thread, then the trouser legs will be located parallel to the edge of the material.

The parts cut out with a small margin are put together and fastened with pins.

It is necessary to sweep away the darts that are located along the waist and bottom line. Then the belt is attached and the cuts on the sides are processed. A cord is inserted at the waist and along the bottom of the trousers.

Pants with elastic band threaded through

If you need to make a pattern for pants with an elastic band, this process will not cause any particular difficulties, since the cut is quite simple and does not require time to make calculations for additional details.

First you need data, which can be obtained by measuring:

• waist circumference;
• hip circumference, you should immediately write down the half-circumference;
• distance from waist to hip;
• leg circumference to determine the width of the trouser leg;
• the length of the trousers, you will need to find out the distance from the waist to the foot.

Knowing all this data, you can make a pattern on graph paper.

The first horizontal line drawn is the waist. A line drawn perpendicularly at the intersection is marked with the letter A, and point B is placed parallel to it. The resulting segment AB is the length of the trousers.

You should set aside segment AB, which is equal to the semicircle of the thigh, taking into account an allowance of up to 8 cm, and draw a horizontal straight line through point B - this is the thigh line. Now the middle of the segment BV is marked, 4 cm is laid upward from this point, and point K is placed. A horizontal line is drawn through it, defining the knee.

Now you should pay attention to your waist. From point A to the right, point D is marked, it is calculated by dividing the waist semicircumference into 4 parts, the resulting total will be given distance. Extra centimeters are added to the allowance.

Point T is located at the same distance to the left of A; an allowance is also required.

The hip line is done this way. From B to the right, point W is placed, obtained by calculating the fourth part of the semicircle of the hips. On the opposite side, at the same distance, point L is marked with an allowance of up to 11 cm.

Bottom line. From point A to the sides, distances equal to half the width measure are marked. The side seam is drawn smoothly with a line, resulting from the intersection of points L and T. L then needs to be connected to the bottom point. From point G, draw a perpendicular to the hip line, retreating 2.5 cm to the right, you need to bring it to point W. You get a codpiece by connecting G and W.

Rear end. From A to the left there is a distance equal to half the semi-circle of the waist. This is point D. Allowance up to 18 cm.

Hip line. The BM segment is laid out to the left and right, they are equal to half a semicircle. The allowance will be 16 cm. A side seam line will run from B to the bottom line.

Baby pants

Mothers love to sew for their children, so making children's pants using a pattern is not a problem for them. The child grows quickly, so it is better to rip out the old trousers and make new ones out of them, taking into account the larger size.

Any fabric will do. If it is summer time, then it is better to take a light one.

The material should be folded right side up, then the pattern is pinned. We must not forget about allowances. You can make a shelf on the front half; after it is cut, you need to turn it over so that its wide part is located at the side.

The cut out front part and the shelf are attached; on the front side the shelf should be folded over, stitching simple seam. Then the two halves are connected and attached.

For the belt there should be a strip of fabric equal in width to the trousers. You need to sew a thick ribbon onto the wrong side. Now you need to insert an elastic band so that it does not squeeze the stomach, but is not too loose.

When making a pattern of pants for a boy, you need to think about how many and what kind of pockets there will be. It is better to make them with small bevels, and so that they do not come off, it would be good to install rivets using special devices. To create pockets, rectangles of the same size are cut out, folded and sewn.

Measurements

In order to sew trousers for a man, you need to know what style he prefers. But no matter what style he likes, a pattern of men's pants will be required in any case.

For creating basic pattern You will need to take measurements such as:

• distance from the waist line to the seat plane;
• and hips;
• length along the inner surface;
• from waist to floor;
• trouser width

All pattern construction is based on the following algorithm. A vertical line is drawn, on which point T is marked. A horizontal line passes through it - the waist line of the front part.

From this point downwards, point W is marked, equal to the distance from the waist to the seat plane. A horizontal line is drawn through it, i.e. the step line.

The bottom line is formed using point Ш, from which the length of the leg along the inner seam is marked down, marked with the letter N. The resulting segment ШН is divided into two parts, and 5 cm above the designated point, point K is obtained, a horizontal line should be drawn through it, which will give a level knee

From W upward, a fourth of the diameter of the hips is laid down and marked with point B; by drawing a horizontal line through it, you can get the line of the hips.

according to the algorithm

The front of the trousers. From point Ш, point Ш 1 is laid off on the step line; it is equal to the half-volume divided by 4 with an allowance of up to 0.5 cm. To the left of it, Ш 2 is measured: the half-volume is divided by 8 plus 0.5 cm.

A line is drawn from W 1 upward, and where it meets the line of the hips, point B 1 is marked, with the waist line - point T 1. From it, 1 cm is laid along the waist line and a point T 2 is placed. From it, a distance is measured equal to a quarter of the volume with an increase of 0.5 cm along the waist line. This is how point T 3 appears.

Then, to the right of B 1, a quarter of the hip circumference is laid off, resulting in point B 2.

From point H on both sides, a point is marked at a distance equal to half the width of the trousers downwards minus a centimeter. New points H1, H2 will appear. Lines run upward from them that intersect with the line of the knees - K1 and K2.

The lateral line is formed after H2, B2, T3 and K2 are connected by a segment; the K2B2 line makes a deflection of 0.5 cm.

Designing the back of the trousers

The back of the trousers. From point Ш1 to right side a fourth of the distance ШШ1 is deposited. Sh3 is placed, and a straight line goes up from it, intersecting with B3 and T4. The distance B3T4 is plotted from B3, resulting in B4.

To get the extreme point, follow from Ш2 to left side measure half of Ш1Ш2, obtaining Ш4, and mark a distance of 0.5 cm from it.

If you now measure 2 cm to the right along the waist line, T5 will appear, and T6 will appear the same distance up from the new point. The middle part of the trousers is obtained when Sh5, B4, T6 are connected.

The waist line is obtained by drawing a line through T6 until it intersects the waist line - it will be T7.

The segment T6T7 is divided in half, where T8 appears, from which darts are marked in both directions.

Knee level. 1 cm is laid in both directions from K1 and K2, these are points K3 and K4. From H1 and H” to the right and left at a distance of 1 cm, H3 and H4 will be formed.

Passes through H4, K4, T7 lateral line back.

Pattern women's pants is created the same way.

Clothes for dolls

To give to children good mood, mothers try not only to buy beautiful toys, but also to sew outfits for them. Pants for dolls are no exception. To make the product successful, you need a pattern of pants for the doll.

To do this, you need the length of the trousers, taking into account a few centimeters for the hem and waist size. You will also need the width of the hips in the most protruding places, as well as the depth of the seat, which is measured as follows: the doll should be planted, measured from the waist to the surface on which it sits.

Conclusion

When sewing, a pattern for the pants is necessary, only then will they fit perfectly. Many women enthusiastically come up with models, decorate their trousers with embroidery, rhinestones, and beautiful appliqués. People around her notice this, admiring the talent and imagination of the needlewoman.

Loungewear is a must, but it's not necessary. , These could be simple home pants or pajamas. Lounge pants and pajama pants are worn with simple T-shirts and T-shirts and are very comfortable. We advise you to sew women's pajama pants from flannel, knitwear, velor and even calico, using your own hands using a pattern. The pattern is so simple that it is easy to draw it directly on the fabric. To create a pattern for pajama pants, just take your measurements; we created a pattern using conventional measurements for size 44. When drawing a pattern, use the construction description and a ready-made drawing of women's pajama pants. Waist semicircle - 34cm; hip semicircle – 47cm; trousers length – 95cm; The width of the bottom of the trousers is 18 cm.

To construct the drawing, let's draw a right angle, with the vertex at point A. From A downwards we put the length of the house trousers, 95 cm we get point H, from H to the right we draw a line.

Draw a hip line from point A down 18 cm for all sizes and mark point B. Draw a straight line from B to the right.

From point A downwards we will set aside 29.5 cm, this is 1/2 the semi-circle of the hips plus 6 cm for all sizes. In our example, 47:2+6=29.5 cm. We got point W - step width.

From point B to the right we will set aside 51 cm and denote it as B1. To calculate the width of the trousers along the hip line, take the measurement of the semicircle of the hips plus 4cm for all sizes 47+4=51cm. From point B1 up, draw a line to the intersection with the top line, point T, draw a line down, point H1, and the intersection with the step line Ш1.

From point B to point B1 we divide in half and get B2, through it we draw a line up to the intersection, the intersection point is at the top T1, at the bottom H2.

Then from point Ш1 to the right we will set aside 6.2 cm and designate Ш2, the calculation will be 47:10+1.5 for all sizes = 6.2 cm.

From point T to the left we put 1 cm from it, from it downwards we put 1 cm we get point T2. From Ш1 we divide the angle in half and set aside 4 cm on it. Let's draw a front seam line through T2, B1, 4 and Ш2.

The width of women's trousers for home can be made to any size, even bell-bottoms, and the length can also be changed as desired. If you draw an additional line below the knee 25cm, you will get short house trousers. You can decorate the bottom of the pants with an elastic band, a cuff, or simply hem it like the bottom of a skirt. To build the bottom of the trousers from H2, set aside 16 cm, this is the width of the trousers at the bottom minus 2 cm for all sizes 18-2 = 16 cm. We will connect the bottom points Ш2 and Н3 and extend the line by 1 cm, connect 1 and Н2.

From point A, set aside 3 cm to the right. From point W, divide the angle in half and set aside 6 cm along the line. Let's connect Ш2,6 and B. Connect points B and 3 and extend the line upward by 4 cm, point T3.

From point H2 we put 20 cm to the left, we get H4 calculation 18+2 for all sizes = 20 cm. Connect points Ш3, Н4 and extend the line down by 1 cm. Connect points 1 and H2.

Let's draw the waist line of the house trousers from T3 to T2 and move on to constructing the darts. If we make house trousers with elastic, this greatly simplifies the construction and sewing of pajama pants - no darts need to be drawn.

Let's build side darts on the pajama pants pattern. From point T1, extend the line upward until it intersects with the waist line, and place T4. From T4 to the right and left we will set aside 2 cm. We connect points 2 and 2 with point B2 with a dotted line, divide it in half and set aside 0.5 cm to the right and left. Let's draw dart lines through 2, 0.5, B2, 0.5, 2.

Trouser front darts. Divide the waist line from T2 to T4 in half - T6. From T6 to the right 2cm, down along the line 7cm. Connect points T6, 7 and 2. From T6 to the left we will put 3cm, from 3 to the left we will put 2cm and down along the line 7cm. Let's connect points 2 and 7.

Darts on the back half of the trousers. Divide the waist line from T2 to point T4 in half and there will be point T5. From T5 to the right and left we will set aside 2 cm. From point T5 down a dotted line 9cm and connect points 2, 9, 2.

The pattern is ready, using this pattern you can sew trousers for pajamas, and if you need to sew a pajama blouse, then turn to.

In this article, as promised, I give a description of how to sew pajama pants. I spent less than an hour cutting and making them.

This photo of the pants is not mine, I took it from the Internet, they are low-waisted, I built mine and sewed them with the waist in my natural place. After familiarizing yourself with, build trousers on fabric.

My measurements turned out to be just right, so as not to cut a wedge. Cut out the cut with seam allowances along the crotch seams of 1 cm, 3 cm has already been inserted at the bottom, and 0.5-0.7 cm along the waistline. From the remnants of the fabric, the so-called lunges, cut out a belt and a wedge, if necessary, taking into account the seam allowances, make notches at knee level.

Fold the fabric right side inward and join the crotch seams. At a distance from the seat line to the notch of the knee line, place the crotch seam of the back half evenly and secure with pins. I stick the pins perpendicular to the cut and stitch without removing the pins, or as I move in front of the foot, I remove the pins.

Sew the stitch on the machine and then finish the edges with an overlocker or zigzag stitch.

Turn one trouser leg right side out, place it in the other, and pin the middle seam or “saddle” together. Sew under the machine and finish the cut with an overlocker.

Sew the section for the belt into the ring, leaving a gap for threading the elastic.

Iron the waistband in half.

Pin the belt onto the trousers. Make sure there is a hole for threading the elastic into finished product ended up inside. For beginning seamstresses, I recommend laying a running stitch, and then stitching the width of the foot from the cut. Process the cut using an overlocker or zigzag.

Along the bottom of the trouser legs on the front side, mark 3 cm from the bottom.

You can first steam the bottom fold along the chalked line, then apply the cut to the fold, place it under the machine and stitch it. To stitch the bottom exactly from the edge, I use a magnetic ruler; without it, it will also work out fine if you use the markings on the machine. Or draw a pencil line at the desired distance from the needle, approximately 1.3 cm.

It remains to steam, and pajama pants will keep you warm in cool weather. I used this pattern to sew fleece-lined work pants for my husband, and you can sew them for your son or daughter. By the way, I still have lunges and I sewed two quick ones.

Warm nights in cozy pajama pants, dear needlewomen!

Although this article is not about making dolls, I couldn't resist showing you the wonderful little dolls that you can make with your own hands. Here, in http://kamyshy.ru/ You will find many master classes on making dolls, doll miniatures, clothes and accessories, and you can also purchase or order a doll according to your sketches.

Home clothes should give a person the opportunity to rest, so for women there are pajamas and , and men prefer shorts and loungewear. But there are also trousers in the form of house pants, with elastic, which men will like. You can sew them from any fabric, even striped or checkered. These lounge pants can be part of pajamas for men. In order to sew home pants for a man, you need to take measurements and build a simple pattern. Let's create a pattern for pants for relaxing with an elastic band, according to the following measurements: waist semicircumference 44cm, hip semicircle 52cm and pants length 110cm. If these are not your measurements, then substitute in the description of the construction of the pattern and get a pattern for right size. We start building with the front half of simple trousers. If the numbers are marked *, then they are constant for all sizes.

Draw a right angle, with the vertex at point A. From point A, put down 110 cm of the trouser length measurement and mark it as point N. From H to the right, draw an arbitrary line. From t. A, put 28 cm down and mark t. W According to the calculation: 1/2 the measurement of the semicircle of the hips plus 2 cm * 52: 2 + 2 * = 28 cm. From point Sh to the right an arbitrary line.

Divide the distance from T. W to T. H in half and set aside 6 cm from T. Division and mark it as T. K. From T. K to the right, draw an arbitrary line.

From t. A set aside to the right, mark 28cm as t. T. According to calculation: 1/2 the measurement of the waist semicircle plus 6cm* 44:2+6*=28cm. From t. T down, draw a line until it intersects with the first horizontal line, t - ku. designate intersections as Ш1. Then, from t. T downwards, set aside 1 cm to designate t. T1. From t. And to the right, set aside 2 cm to designate t. T2. Then connect T2 and T1.

From point Ш to the right, set aside 32 cm and designate Ш2. According to calculation: 1/2 measurements of the semicircle of the hips plus 6cm* 52:2+6*=32cm. From point Ш2, draw a line down until it intersects with the lower horizontal line. Designate the intersection point as H1. Extend the line until it intersects with the second line and mark point K1.

Bow line. From point Ш1 along the line dividing the angle in half, set aside 3 cm. From point Ш1 up, set aside 6 cm, place point Ш3. Draw a bow line through points T1, Ш3, 3, Ш2.

Step seam. Set aside 6 cm from point H1 to the left, place point H2. Connect points Ш2 and Н2. The point of intersection with line KK1 is designated K2. Divide the distance from point Ш2 to point K2 in half. From the division point to the left at a right angle, set aside 0.5 cm. Connect points Ш2, 0.5, К2.

Side seam. From point A, put 17 cm down, mark point B. From point H, put 6 cm to the right, mark point H3. Draw a line through T2, B, W, H3.

Pattern of men's pants, back half

Copy the pattern of the front half of the pants and complete the pattern of the back half of the men's pants. From point Ш2 to the right, set aside 8cm and place point Ш4 according to the calculation of 1/4 of the distance from point Ш to point Ш2 32:4=8cm.

Seat line. Set aside 6 cm from point T to the left, place point T3. Connect points Ш2 and Т3 with a dotted line, divide it in half and set aside 0.5 cm from the division point to the right at a right angle.

Divide the distance from point Ш2 to point Ш4 in half, and set aside 1 cm down from the division point. From point Ш4, set aside 0.5 cm downwards and place point Ш5. Draw the seat line through points Ш3, 0.5, T3 and further up, extend the line by 5 cm and place point T4. Continue the seat line through points Ш3, 3, Ш2,1, Ш5.

Waist line of men's pants. From point T3, set aside 29cm to the left, mark T5, according to the calculation: 1/2 the measurement of the waist semicircle plus 7cm* 44:2+7*=29cm. Connect points T4 and T5. From point K1, extend the line to the right of any length. From point H2 to the right, set aside 2 cm, mark H4. Connect points Ш5 and Н4. The point of intersection with the horizontal line KK1 is designated as point K3. From point Ш5 to point K3, divide the distance in half and set aside 0.5 cm from the division point to the left. Connect points Ш5, 0.5, K3 to create a crotch seam.

From point H3, set aside 2 cm to the left, mark point H5. Connect points T5 and H5. The pattern of pants for men has been created; when laying it out on the fabric, add an allowance for the seams.