Sizes: 38/40 (42/44) 46/48 You will need: for the vest 500 (550) 600 g and for the scarf-hood 350 g of blue-green yarn Everybody Unito (80% natural wool, 20% polyamide, 75 m/ 50 g); straight and circular knitting needles No. 7; 5 green stick buttons; fur pompom
Garter stitch: straight rows: knit. and out. r.-persons P.; circle, r.: alternately 1 circle. R. persons p., 1 circle. R. purl P.
Relief pattern: width 8 sts. Knit according to the pattern on which the faces are shown. R. In purl. R. knit loops according to the pattern. Repeat rapport loops from 1st to 12th p.
Knitting density, main pattern and garter stitch: 15 sts and 21 r. = 10 x 10 cm.
Back: cast on 66 (74) 82 sts and for the placket knit 6 cm in garter stitch, while in the last purl. R. evenly add 8 sts = 74 (82) 90 sts. Then knit between the edges. relief pattern. After 39 cm from the bar, knit for the armhole strips on the outer 5 stitches (edge and 4 stitches of the pattern) in garter stitch, on the remaining stitches continue the relief pattern. After 57 (59) 61 cm from the placket, close off the middle 26 stitches for the neckline and finish both shoulders separately. Next 2nd r. bind off 1 x 1 st from the inner edge. After 59 (61) 63 cm from the bar, bind off the remaining shoulder loops. Left front: cast on 38 (42) 46 sts and for the placket, knit 6 cm in garter stitch, while in the last purl. R. evenly add 4 sts = 42 (46) 50 sts. Then knit as follows: chrome, 32 (36) 40 sts in relief pattern, while for size 42/44 end with loops to the arrow, then for the placket 8 sts. garter stitch and 1 chrome. Make the armhole bar on the right edge as on the back. After 47 (49) 51 cm from the bar, set aside 9 p. of the bar and on the remaining p. knit further according to the pattern, while in the 1st r. From the left edge of the work, close 1 x 5 p. for the neckline, then close in every 2nd r. 1 x 2 and 3 x 1 p. At the height of the back, bind off the remaining shoulder loops.
Right front: knit symmetrically, but make 5 holes for buttons as follows: close the 5th and 6th sts from the beginning of the p. and in the next R. cast on these loops again. Make the first hole for the button 19 (21) 23 cm from the cast-on edge, the rest - at intervals of 8 cm.
Assembly: cast on the knitting needles the set aside loops of the front panels and knit 21 cm in garter stitch. Then set aside all the loops. Lightly moisten the pieces, straighten them according to the dimensions indicated on the pattern and dry. Sew shoulder seams. Connect the set aside loops of both strips with a knitted seam and sew the strip into the neckline. Execute side seams. Finally, lightly steam all seams. Sew buttons.
SCARF-HOOD
How to do the work: cast on 63 sts on circular needles, close into a ring and knit in garter stitch. In every 16th r. evenly decrease 2 x 9 sts. After 20 cm from the cast-on edge, divide the work and then knit in garter stitch in straight rows. After 40 cm from the division of work, put the loops aside. Fold the product in half, matching the laid-off loops, and connect them with a knitted seam. Sew the pompom to the top of the head.
Model and description of knitting a vest with a hood from the magazine, Special Issue, No. 2, 2015
Previous models from the section vests, sleeveless vests
Sizes: 36/38 (40/42.44/46) For the vest you will need: 350 (400.450) g black and 100 (100.150) g white yarn Schachenmayr SMC KADINA LIGHT (62% polyacrylic, 26% wool, 12% polyester, 40 m/50 g); knitting needles No. 10-12; hook No. 10-12.
Sizes: 36/38, 40/42, 44/46 and 48/50 Materials: BC Gam yarn "Semilla Fino" (100% organic sheep's wool, 240 m/50 g): approx. 300 (300-350-350) g steel color No. oh102 and 100 (100-150-150) g yellow-green color No. oh107; addi straight knitting needles No. 3.5, addi circular knitting needles No. 3.5 40 and 100 cm long, addi sock knitting needles No. 3.5, addi crochet hook No. 3; 1 decorative button, diameter approx. 3.5 cm.
The most popular vests and sleeveless vests in the section according to user ratings
Vest size 38 For knitting you will need: 350 g of yarn gray(50% wool, 50% acrylic, 250 m/100 g). Knitting on circular and straight needles No. 3.
Season: spring/autumn.
Hook/knitting needle/fork size: 2.5-3.5.
Yarn composition: acrylic, wool.
YOU WILL NEED: 300 g of Setato TM Lane Mondial yarn, red color No. 851 - knitting needles No. 5.5; wool needle with a rounded end.
Season: spring/autumn.
Hook/knitting needle/fork size: 5.5-6.5.
Yarn composition: wool.
Knitting a sleeveless vest with a hood
Knitting sleeveless cotton vests
Long turquoise sleeveless vest with a hood. Knitting a sleeveless vest with a pattern of interesting weaves with an elastic band is not so hard work as it seems at first glance. Be careful, the first repeat of the pattern is done with increments of loops!
Bust: 86-97 (102-107) cm.
Length: 76 cm.
Materials: 800 (900) g of Schachenmayr/SMC Cotton Time yarn (100% cotton, 50 g/88 m), long circular knitting needles 4-5 mm.
Rubber: K2, p2
Braid pattern: look at the diagram, the diagram is shown on the front side, on the wrong side, knit the loops as they appear. Knit rows 1-10 (with added stitches) – 1 time, then repeat rows 11-26 throughout the work. The bottom row of the diagram (without a number) is an elastic band.
Knitting density: 24-25 p. * 25 r. = 10*10 cm elastic band slightly stretched, 18 braid loops = 6.5 cm wide.
Knitting sleeveless vests, description:
Back: cast on 122 (130) sts and knit 12 cm with an elastic band, starting from the purl row with 1 purl, 2 knits, 2 purl.
Next, knit rows 1-10 of the pattern with added loops: edge loop, 3 (7) loops with an elastic band, *14 (after adding 18) braid loops according to the pattern, 4 (after adding 6) with an elastic band, repeat from * 4 times, 14 (after adding 18) braid loops according to the pattern, 3 (7) loops elastic band, edge loop = 146 (154) loops after the 10th row.
Next, knit rows 11-26 according to the pattern, repeating them to a height of 57 (55) cm from the cast-on edge.
Armholes: bind off 5 loops on each side - 1 time, then decrease in every second row on each side 3 loops - 1 time, 2 loops - 2 times and 1 loop - 2 times; then decrease 1 loop in every fourth row - 1 time = 116 (124) loops.
Knit the outermost 12 (16) loops with an elastic band + 1 edge stitch on each side, and the remaining loops as before in the pattern.
Neck: at a height of 71 cm, bind off the central 34 (36) loops, continue to knit the loops of each shoulder separately.
Decrease from the neck side in every second row 4 loops - 1 time, 2 loops - 1 time and 1 loop - 1 time. = 34 (37) stitches for each shoulder.
Before: knit everything as for the back, except for the neck.
At a height of 46 cm, knit the first 72 (76) loops into the pattern, set these loops aside, finish in the pattern = 74 (78) loops.
Right front: cast on 1 stitch from neck side = 75 (79) stitches.
At a height of 57 (55) cm, make decreases for the armhole like at the back.
At a height of 68 cm, transfer the first 15 stitches from the neckline to additional knitting needles, ending the row in the pattern.
Decrease from the neck side in every second row 3 loops - 1 time, 2 loops - 2 times, then 1 loop - 4 (5) times.
At a height of 76 cm, close the loops
Left shelf: return to set stitches, start from purl. row, pick up 3 loops at the beginning of the row, knit symmetrically with the right!
Assembly: sew the shoulders.
Hood: from the front side, cast on 15 loops along the neck of the right front, 110 (118) stitches and 15 loops along the left front = 140 (148) loops.
Knit with an elastic band 2*2 – 28 cm.
Mark the 2 center loops of the hood and knit them together on the next row.
Knit a row with an elastic band.
Mark 3 central loops, (slip the loop as a knit, 2 knits together, throw the removed one over the knitted one) - above the marked loops in the next row.
Continue such decreases in every second row – 6 times = 126 (134) sts.
Divide the stitches in half onto 2 different needles and bind them off using the 3rd needle.
Armholes: cast on 98 (106) cm around the armhole, knit with an elastic band 2*2 - 6 cm.
Close the loops.
Sew the armhole placket and side.
Repeat for the second armhole.
You will need
Yarn (55% cotton, 45% polyacrylic; 140 m/50 g) - 100 (150) 200 g light gray and 50 (50) 50 g red; knitting needles and long circular knitting needles No. 3.5; 5 buttons with a diameter of 16 mm.Garter stitch
Knit front and back rows.Knitting density
19 p. x 42 r. = 10 x 10 cm.Attention!
You should strictly adhere to the specified knitting density, change the knitting needles if necessary!Pattern
Completing of the work
Back
Using red thread, cast on 59 (67) 74 sts and knit in garter stitch.For armhole cutouts, 18 (21) 24 cm from the initial row on both sides, close 2 stitches and in each next 2nd row. decrease on both sides another 2 (3) 4 x 1 p. = 51 (57) 62 p.
After 30 (34) 38 cm from the initial row, close all the loops. The middle 27 (29) 30 sts form the neckline, the outer 12 (14) 16 sts form the shoulders.
Left shelf
After 1 cm, continue knitting with garter stitch with light gray thread.
For button holes, retreat 2 stitches from the front edge and knit 2 stitches together, 1 yarn over. In the purl row, knit a yarn over. Make the first hole for the button 2 cm from the starting row, the rest - at intervals of 6 (6.5) 7 cm = 24 (28) 30 r.
At the same time, for the armhole, after 18 (21) 24 cm from the initial row from the right working edge, close 2 stitches and in each next 2nd row. decrease another 2 (3) 4 x 1 p. = 28 (31) 34 p.
To cut the neckline, after 27 (30) 33 cm from the initial row from the left working edge, close 5 (6) 7 p. and in each next 2 p. close off another 1 x 3 p., 2 x 2 p. and 4 x 1 p.
Right shelf
Using red thread, cast on 32 (36) 40 stitches and knit in garter stitch.After 1 cm, continue knitting with garter stitch with light gray thread.
For the armhole, after 18 (21) 24 cm from the initial row from the left working edge, close 2 stitches and in each next 2nd row. decrease another 2 (3) 4 x 1 p. = 28 (31) 34 p.
To cut the neckline, after 27 (30) 33 cm from the initial row from the right edge, close 5 (6) 7 p. and in each next 2 r. close off another 1 x 3 p., 2 x 2 p. and 4 x 1 p.
After 30 (34) 38 cm from the initial row, close off the remaining 12 (14) 16 stitches for the shoulder.
Hood
Using a light gray thread, cast on 58 (70) 80 sts and knit in garter stitch.For side bevels in each next 16 (12) 10 r. on both sides decrease 4 (6) 8 x 1 p. = 50 (58) 64 p.
After 16 (18) 20 cm from the initial row, close all the loops.
Assembly
Stretch the parts according to the pattern, moisten and let dry.Use a mattress stitch to sew the shoulder seams.
For the straps along the edges of the armholes, use red thread to cast on 48 (52) 56 stitches on the knitting needles for each strap and knit 1 cm in garter stitch. Then loosely close all the loops.
The side seams and the seams of the slats are made with a mattress seam. The top seam of the hood is made with a mattress seam. Sew the hood to the neck using a mattress seam.
For the stripes along the edges of the shelves and along the edge of the hood, using red thread on circular needles No. 3.5, evenly cast on 156 (190) 204 sts and knit 1 cm in garter stitch. Then loosely close all the loops.
Sew buttons.
Photo: Sabrina Baby magazine No. 1/2017
A hood or bonnet can be either a separate part of your clothing or an addition to a regular sweater/jacket. Children and teenagers love hoods very much. The hood looks especially natural on children's sweaters, fashionable hoodies, jackets and coats. Coat, jacket with a hood, is not only fashionable, but also functional. In snow, rain, and strong wind, the hood will save you from unpleasant weather conditions. Today we will tell you how to knit a hood with knitting needles.
You can knit a hood with knitting needles different ways. The easiest way is to knit a rectangle and sew it along one side.
We knit the hood separately from the jacket. We are recruiting required amount loops on straight knitting needles. There should be exactly as many loops as there are loops along the entire length of the neck plus strips for fasteners. We knit a rectangle up to the height of the head plus 3-4 cm. The pattern can be used the same as on the jacket.
Hood pattern with knitting needles:
The second method is to lift the loops along the neckline of the sweater and start knitting the hood with the main pattern according to the method described above.
How to knit a hood-collar with knitting needles
In knitting, along with the classic hood, which resembles the shape of the heel of a sock, the hood-collar is especially common. There are several ways to do this. Here is the simplest of them.
The neck line on the base pattern for the back and front remains unchanged, only the dimensions of the fastener and hood are outlined. Knit the back and front pieces, leaving the neck loops open. Sew the product, place the neck stitches on one needle and, starting from point A, knit a row of knit stitches along the right side of the work. Slip the loops up to point A onto the right needle without knitting. Next, make the hood with a placket pattern, such as garter stitch, adding loops in the middle of the hood at the back (see the “+” sign) or along the edge of the hood.
When the height of the fabric reaches 35-38 cm, finish the work with an auxiliary thread, after ironing, unbraid it and sew the open loops with a loop-to-loop stitch.
There is another way to knit a hood.
For a classic hood, you need to pick up loops along the edge of the neckline. In order to be accurate, you should type on the front side. Fasten the thread at the beginning of the row and, using a knitting needle (or hook), begin to pull the working thread through the loop on the product. The loops remain on the knitting needle. Having cast on the loops, you need to knit 2 rows with a simple stockinette stitch.
Next, the hood is knitted in short rows. To do this, knit the next front row not completely, turn the knitting, yarn over, and again without purling the row, turn the knitting. Thus, first one side part of the hood is knitted, then the second is knitted. Thus, we knit a hood of the required length. Then close the loops on the sides.
After this, the middle part is knitted. When knitting the middle part, pick up the side loops and finish knitting. Several rows along the edge of the hood can be knitted English rubber band or openwork crochet. This is what an approximate diagram of the hood looks like.
Interesting models with a hood from the Internet
Blue coat with hood
Beautiful and stylish model. The coat is decorated with large flowers and twigs with leaves at the back, while at the front it is a simple model.
Bust: 86 (97.105. 113, 120) cm. Size: XS (S, M, L, XL).
You will need: 12 (12. 13. 13. 14) skeins of Briggs & Little Atlantic yarn (100% wool. 124 m/11Zg), color – 73, red
- circular knitting needles No. 10-12, length 40 and 80 cm or another size to achieve the required knitting density
- Loop holder for braids
- 6 large buttons
- Markers for knitting
- Yarn needle
- 5 buttonhole pins or leftover yarn.
Size 43*61 cm.
This is a trending model from Vogue Knitting magazine.
Knitted Mocha Hoodie Hat by Sandi Prosser
The hood is knitted crosswise, starting from the front to the back and then a vertical seam is made.
Size 55 – 56, 57 – 58. Circumference at the bottom of the product (neck) – 47.5 (52.5). Height 25cm.
Hood with ears
For knitting you will need: Lana Gold Plus yarn (51% acrylic, 49% wool, 140 m/100 g) - 200 g beige, knitting needles No. 5, 3 buttons, hook, padding polyester.
Knitted hooded shrug
Sizes: 116/122-128/134-140/146 152/158. You will need 650-700-750-800 g of yellow yarn Schachenmayr SMC Cotton Time (100% cotton. 88 m/50 g); knitting needles No. 3 and No. 3.5; circular knitting needles No. 3.5; auxiliary knitting needle; 7-8-7-8 buttons.
Knitted scarf-hood
Scarf dimensions: length 210 cm, width 30 cm. Hood dimensions: 72x84 cm.
To knit a scarf-hood you will need 10 skeins of yarn (75% wool, 25% silk; 220 m/10 g); knitting needles 7 mm, auxiliary needle for braids, hook 7 mm, holders for loops.
Basic matings.
Garter stitch: knit stitches on each row;
Knit stitch: knit stitches in knit rows, purl stitches in purl rows;
Braids: knit 16 loops according to patterns A and B where only the front rows are shown (in the purl rows, knit according to the pattern), repeat rows 1-10 vertically;
Edge loops: knit in each row.
Knitting density:
13 p. and 20 r. = 10x10 cm with stockinette stitch thread in 2 folds;
16 stitches of braided pattern = 7.6 cm wide.
Interesting models with a hood on our website:
Yellow cape with hood
Sizes: 42(46).
Materials: 1000 (1,150) grams of “Merinos Otto” yarn (100% merino wool, 50 grams = 90 meters), knitting needles No. 3.5 and No. 4, hook No. 2.
Types of knitting: hollow elastic, 2×2 elastic, knit. satin stitch, purl smooth surface
Knitted tunic with hood
To knit a tunic you will need: CATANIA yarn (100% cotton; 50 g/125 m): 250 (300; 350) g No. 00106 white, 300 (350; 400) g No. 00164 dark blue. Knitting needles No. 2.75 and 3. Circular knitting needles No. 3.
Vest with hood, knitted
Vest sizes: 36/36 (40/42) 44/46.
For knitting you will need: 400 (400) 450g. lilac Windsor yarn (55% merino wool, 31% royal mohair, 14% polyamide, 110 m/50 g); knitting needles No. 4.5; hook number 4.
Scarf with hood
The hit of this winter is a hood that smoothly turns into a scarf. The thing is not only fashionable, but also very comfortable.
You will need: yarn “Secret of Success” (100% wool, 250 m/100 g) – 200 g purple, knitting needles No. 4.
Coat with hood
You will need: 1700 g 1700 g of nut-colored yarn MONDIAL MERINO MAXI (50% merino wool, 50% acrylic, 60 m/100 g); straight and auxiliary knitting needles №8.
Melange jacket with hood
Jacket with a hood, knitted in two threads.
Size: S-M-L-XL – XXL – XXXL.
You will need: 350-400-450-450-500-550 g of Fabel yarn from Garnstudio color No. 161 (rose dream) and 350-400-450 450-500-550 g of color No. 153 (tex mech): Knitting needles 5 mm, 6 -6-6-7-7-7 metal buttons.
Coat size: OG 90 cm.
To knit a coat you will need: 700 g of thread, knitting needles No. 5.5; 4 large buttons.
Vest with hood
Vest sizes: 38-42
You will need: 750 g of blue yarn Linie 270 Faro (60% wool, 40% polyacrylic. 80 m. 50 g) double-sided transparent zipper 50 cm long straight needles No. 5 and No. 6 long circular needles No. 5 crochet hook No. 5.
Knitted models with a hood for children
Striped sleeveless vest with hood
Sleeveless sizes: 92 (104). You will need: 100 g each of orange and hot pink, 50 (100) g of cyclamen-colored yarn (100% polyamide, 90 m/50 g); straight knitting needles No. 3 and 4; fugue knitting needles No. 3.
Coat for girls with hood
Size: 68/74 (74/80) 80/86.
You will need: 300 (400) 400g melange yarn Linie Miranda and 200 g of orange Linie Champ yarn (100% merino wool, 70m/50 g); knitting needles No. 7-7.5; hook No. 5.5; 3 buttons.
Size 2-3 years. You will need: “Popular” yarn (50% wool, 45% acrylic, 5% bulk acrylic, 133 m/100 g) - 400 g gray, leftovers fine yarn gray, knitting needles No. 4.5 and No. 2.5, 4 buttons.
Jacket with hood for boy
Size: 110/116. You will need: 450 g of beige Cool Wool yarn (100% merino wool, 160 m/50 g); knitting needles No. 4; hook No. 3.5; zipper 40 cm long.
Size 38-40 Materials SUPERLANA MAXI yarn (25% wool, 75% acrylic) 100 m / 100 g – 6 skeins Needles 6 mm Note: knitting density for SUPERLANA MAXI yarn with a recommended needle size of 8 - 10 mm 11 loops and 15 rows = 10 x 10 cm Right shelf Cast on 43 loops and knit 5 cm with an elastic band 1 x 1 (K1, P1). For the front edging, throughout the entire fabric, knit 6 loops on both edges with an elastic band. Knit in the following order: 6 rib stitches, knit 16, purl 1, knit 14, 6 rib stitches. In the part of the fabric knitted with 16 knit stitches, in the 6th row, make a “braid” pattern: move 8 loops with a slant to the right (remove 4 loops on an additional double-pointed knitting needle and place them behind the work, knit 4 knits, then knit 4 from an additional knitting needle) , the remaining 8 loops are tilted to the left (slip 4 loops onto an additional double-edged needle and place before work, knit 4 knits, then knit 4 from an additional knitting needle). Having crossed the 3rd “braid”, continue knitting, after 6 purl loops from the outer edge, decrease 1 loop in each front row until the front loops run out. Having crossed another “braid”, now on the other side, decrease 1 loop in every 2nd row (immediately after the elastic band) to cut the neckline. The 8th “braid” will decrease by 2 loops, this time the braid will be knitted from 3 x 3 loops. By tying 3 “braids” in this way, the strands will be reduced by another 2 loops and will consist of 2 x 2 loops. Having knitted 4 more “braids”, put the fabric on the loop holder. On the right shelf bar, make 2 holes for buttons (in the 33rd row and after it in the 20th row). Knit the left front symmetrically. Back Cast on 67 loops and knit 5 cm with an elastic band 1 x 1. Then knit in the following order: 6 loops with an elastic band, 18 knit, 1 purl, 2 knit, 1 purl, 16 knit, 1 purl, 2 knit, 1 purl, 18 knit, 6 loops with elastic band. In the part knitted with 16 facial loops in the same way as on the front part, a “braid” pattern is performed). Having knitted 20 rows, continue knitting, decreasing 1 loop from each edge after the outer elastic bands until 5 loops remain in the areas made with stockinette stitch. Then knit 15 cm of fabric without decreasing, then continue knitting, adding 1 loop from each edge after the outer elastic bands in every 2nd row until you have 10 knit stitches. Then put the loops of the outer elastic on the loop holder and continue knitting the remaining loops of the back. Hood Return to work the loops of the front shelves (except for the loops on the outer side of the elastic) and knit in one fabric. Knit the outer 6 loops with an elastic band, and the middle loops in stockinette stitch. Knit 2 rows, then add 1 stitch every 5 stitches. After knitting another 28 cm, bind off all the loops. Assembly Sew the side seams. Sew the loops left on the loop holder using a knit stitch. Sew a seam on the hood.