Naturally, every girl dreams of becoming the happy owner of an exclusive item. The heat has arrived, the season for beaches and trips outside the city has opened. The most relevant wardrobe item at this time is a swimsuit. I suggest not to be a gray mouse and stand out from the crowd! A knitted swimsuit is what you need this summer!

Before you start knitting, you need to decide on the composition of the threads.

Yarn quantity:

• 1 skein (50 g = 90 m) of green yarn.

• The work will use hooks No. 1.5 and No. 1.9.

Other materials:

• Green ribbons

List of abbreviations:

1. air loop - vp
2. double crochet - dc
3. single crochet - sc

Stages of work:

In this work, stretch cotton from the Turkish company “Diva” was used. In principle, this option is not the only possible one. Some prefer 100% cotton, others even knit from thin acrylic.

Depending on the thickness of the thread and individual knitting density, select a tool. In this master class, the swimsuit bodice is crocheted No. 1.5, and the bottoms are crocheted No. 1.9.

Knitting bodice

1. Traditionally, work begins with simpler elements. Cast on 20 ch and from stitch 3 start knitting a dc in each ch. Please note that in 20 ch you need to knit 3 dc, 1 ch, 3 dc. Next, do the double stitch, tying the braid on the other side. All subsequent rows are rotary.

2. Work according to the diagram until the desired cup volume is achieved.

3. In general, you can finish at this stage. But you can decorate the bodice with a “net”: dc, ch, dc, ch. The lower part is hd. So knit one circle and perform the final tying of the finished cup p.s.n. The second part is done in a similar way. Make sure that the bodice is as symmetrical as possible!

Knitting swimming trunks (pattern of swimming trunks, top, base)

1. Swim trunks should be knitted from bottom to top. We cast on 20 ch, make the first dc in the 3rd loop. For the front part of the swimming trunks, knit 7-8 turning rows without changing the size of the fabric. The number of rows is a very approximate parameter. It depends on the size of clothes you wear. You can take your regular underwear as a basis and constantly apply the product to it while knitting.

This method will help determine the right direction of movement and will not allow you to get lost. Increments are made in this way: at the beginning of each row you need to perform 4 ch rises and knit the first dc in the first lift loop. Continue knitting until half of the piece is completed (approximately 18 rows).

3. When you get a truncated triangle the right size, start knitting the sides. To do this, without tearing off the thread, at the beginning of the row, instead of 4 ch, make 25 ch. After the beginning of the row, count 22 ch, and start knitting from there. When you reach the end of the fabric, break the thread. Knit 25 ch. and connect the “pigtail” with the broken thread. Climb up and continue the pattern.

4. Make a few more rows and complete the front of the bottom.

5. The back part is knitted in almost the same way. The only difference is in quantity straight fabric at the beginning of work. In this master class, 2 rows are connected in this way.

6. Connect the parts of the swimming trunks and complete the complete piping.

Harnesses and decorative elements

1. A fully knitted swimsuit feels a little heavy. Therefore, it can be alleviated by satin ribbons. Decide on the desired length of the harness, which is located around the neck. Measure and sew it, slightly gathered with a needle, to the tops of the bodice. The ties are also attached in the same way.

Small bows made from ribbons of an identical shade, but smaller in width, will perfectly complement the finished set!

Stores offer such a variety of swimwear that it becomes more and more difficult to stand out on the beach with a special swimsuit every year. But things made with your own hands have not yet been canceled! Moreover, this way you can create a unique, inimitable thing and certainly will not go unnoticed in it.

DIY knitted one-piece swimsuit

In order for a self-knitted swimsuit to fit your figure well, it must be knitted from cotton threads that contain lycra or elastane. Otherwise, when wet, your swimsuit will simply sag and you will definitely not be interested in its openwork beauty. Items knitted from cotton are not hot, the body breathes well, and the item itself does not deform when worn, unlike those knitted from viscose, which, among other things, also takes a long time to dry in the sun.

Also in specialized craft stores you can find special yarn specifically for knitting swimsuits. If you use it at work, then in the swimsuit you knitted you can safely go to the pool with chlorinated water: its color will not fade or fade, and to the beach - the swimsuit will not fade in the sun.

Usually used for knitting swimsuits thin hook No. 2-3, and so that when wet it fits your figure just as well, experienced knitters came up with the idea of ​​tying a thin, almost invisible elastic band - spandex - into the straps and along the edges of the trunks.

One-piece swimsuits remain at the peak of popularity in the last season: if earlier fashionistas tried to expose themselves as much as possible, now the fashion of those times is returning when a bathing dress was just a dress, short, but closed and as feminine as possible.

Of course, it’s difficult to get a beautiful tan in such a swimsuit, but on an evening walk along the coast, at a beach party, in the pool or in a water park, you definitely can’t do without a one-piece swimsuit. Particularly beautiful are delicate, lace swimsuits, which in themselves convey incredible femininity and attractiveness. Tanned skin languidly shining through the openwork lace will not leave indifferent either the man of your dreams or a friend who constantly follows fashion trends.

And one more little secret that you would never have guessed! A crocheted one-piece swimsuit can easily be worn as a bodysuit, with trousers or a skirt. We assure you, no one will even think that this is a bathing suit, of course, if you choose not the most open model and without ties at the back.

Knitted one-piece swimsuit: options and patterns

There are already so many patterns and models of knitted swimsuits that it would seem that there is nowhere else to strive. But the needlewomen don’t stop there and come up with more and more new patterns, some of which we will be happy to share with you.

Since we're talking about bodysuits, let's start with a suitable model:

Simple and stylish knitted swimsuit

If the previous patterns seemed too complicated to you, then there is another option for a stylish crochet swimsuit: it’s no secret that two-piece swimsuit It is faster and easier to knit than a fused one, and it takes less yarn. But by knitting the bodice and swimming trunks separately according to the simplest pattern, you will be able to knit a long decorative cord and use it to connect the top and bottom of your swimsuit, placing the cord randomly or even tying many beautiful knots from it using the macrame technique.

We have already described a similar version of a swimsuit in knitting swimsuits for children. This way you will get a fashionable trikini swimsuit (monokini), which is not only in no way inferior to a one-piece swimsuit, but no one else will have one like it, because you choose the pattern and location of the decorative cord yourself!

The principle of such knitting is described in the video, but instead of a cord, fabric is used here, crocheted separately from the swimsuit.

Several Yet simple circuits crochet trikini swimsuit, which even a novice craftswoman can definitely handle:

This season we invite you to knit a new swimsuit. On the Internet you will find many different models of crocheted swimsuits, but with knitting needles the situation is much worse. Therefore, we decided to compile a small selection of interesting knitted swimsuits found on the Internet, published on our website and linked by our readers.

Knitted swimsuits have been fashionable for several seasons now. Select suitable model swimsuit, buy stretch threads and start updating your summer wardrobe while the weather allows us to enjoy the warmth.

Types of swimsuits

• separated
• continuous
• tanks

Before you start knitting a swimsuit, you need to decide on its appearance. Knitting a two-piece swimsuit is faster and easier, but in our opinion, one-piece swimsuits are more elegant.

Knitted swimsuit trends

This season, knitted swimsuits remain in fashion, as in the past two seasons, but still not every swimsuit will become trendy. Some of our tips for choosing a fashionable swimsuit:

• striped swimsuits, especially red and white combinations
• swimwear with high line swimming trunks, they are still relevant
• one-piece swimsuits with an open belly, this is difficult to knit beautifully, but you can try it
• two-piece swimsuits in which the top and bottom are connected by thin strips of fabric or yarn
• swimsuits in which the top is designed with a strap on only 1 shoulder
• any swimsuit in a bed shade close to the color of your skin. This color will probably look very impressive on a tanned body. But what should white-skinned people do? Choose bright striped swimsuits))

So, if you decide to knit yourself a new swimsuit, then look and choose. Any model can be remade in accordance with the trends of this summer.

Knitted swimsuits - interesting models from the Internet

There are not many swimsuits on our website, so we found several models from magazines for you.

Interesting selection for the site Only children's models

Swimsuit sizes: 38-40 / 42-44. Classic black and white combination, what could be better. This swimsuit is always in fashion and looks stylish.

You will need: Bouton d'Or yarn: MANGO (50% cotton, 50% modal, 50 g/110 m), color Noir (black) 0383: 3/4 skein; color Cygne (gray) 0135: 2/2 skeins, knitting needles No. 3.5.

A seductive bikini swimsuit made of metallic yarn will attract everyone's attention and does not require much yarn consumption. Its beauty is in minimalism.

A distinctive feature of this swimsuit is the gold buckles. It is not difficult to knit, but finding suitable golden details can take a lot of time.

White swimsuit with beaded embellishment. The swimsuit itself is minimalistic, but the beaded decoration will make it more spectacular.

Swimsuit size: 36.

Materials: p“Blues” knit (20% silk, 80% acrylic, 190 m/50 g) – 100 g white. Knitting needles No. 2. Hook No. 2. 3 m of hat elastic. 100 g of beads, decorative flower made of beads.

The beauty of this swimsuit is its playful ruffles.

Size: 42-44

You will need: Diva Stretch yarn (98% cotton, 2% elastic, 160 m/50 g) – 50 g each in lilac and white colors, knitting needles No. 3.5, hook No. 3.

You will need: COCO PRINT yarn (100% mercerized cotton, 240 m/50 g) -150 g sectionally dyed, knitting needles No. 1.5 and No. 3, hook No. 3, elastic band 2 m.

Elastic band 1×1: alternately – 1 purl. p., 1 persons. P.

Double rib: Row 1 - k1. p., 1 p. p. 2nd and subsequent rows - persons. p. knit knit, purl. n. remove onto the knitting needle. Facial surface: faces. rows - persons. p., out. rows - purl. P.

Bodice: Cast on 250 stitches on needles No. 1.5 and knit double elastic band 1 cm high. Then faces. in satin stitch 2 cm. Next, knit 25 sts with a double elastic band, 200 sts. satin stitch, 25 sts with double rib. When the height of the double elastic band is 1 cm, bind off 25 sts on both sides, the remaining loops from the faces. knit the sides as follows: chrome. p., persons p., remove 1 p., knit. p., remove 1 p., 190 p. knit. satin stitch, remove 1 stitch, knit. p., remove 1 p., knit. n., chrome. P.

Knit purl rows as follows: chrome. p., out. n. remove, persons. p., out. n. remove, persons. p., 190 p. p., persons p., out. n. remove, persons. p., out. n. remove chrome. p. Next, in each front row, decrease 2 p. from each edge after purl. removed loop. Repeat 20 times (= 180 sts). Then knit with a double elastic band 1 cm. Close the loops. Tie a rope 5 cm long - cast on 5 stitches and knit. satin stitch Sew the rope into a ring and thread it through the middle of the bodice.

Insert the elastic band into the bottom drawstring of the double elastic band. Knit a chain 82 cm long - cast on 5 stitches and knit in stockinette stitch. Insert the resulting rope (ties) into the ring between the cups.

Swimming trunks: Cast on 271 sts on needles No. 1.5 and knit with a 1 cm double elastic band. Then knit 2 cm. Using satin stitch, add 5 stitches every other row (add 15 stitches in total = 286 stitches). Tie 1 cm with a double elastic band. Then bind off 30 stitches, knit 86 stitches, bind off 65 stitches, knit 70 stitches, bind off 35 stitches. Next, knit the back and front of the swimming trunks separately. Back: 86 sts on knitting needle.

Front row: chrome. p., persons p. 1 p. remove, persons. p., remove 1 p., 76 p. knit. satin stitch Remove 1 stitch, knit. p. 1 p. remove, persons. p., remove 1 p., knit. n., chrome. P.

Purl row: chrome. p., out. n. remove, persons. p., out. n. remove, persons. p., 86 p. p., persons p., out. n. remove, persons. p., out. n. remove chrome. P.

Then in every 2nd person. row, decrease one stitch on both sides after and before removing purl. p. Repeat 15 times (= 56 p.). Then, in the same way, decrease 3 times, but in each person. row (= 50 p.). Next 4 times in each person. row of 2 sts on each side (= 34 sts). Then decrease 4 times in each front row, one loop on each side (= 26 sts). Knit another 3 cm and bind off the loops.

Front part: 70 stitches on a knitting needle. Knit similarly to the back part, but decrease as follows: knit 1 cm without decreasing, 16 times in each knit. row, one stitch on each side (= 26 stitches). Knit 6 cm and bind off the loops. Sew the side and bottom seams. Gusset: cast on 16 stitches and knit. in satin stitch 10 cm. Sew the gusset to the swimming trunks. Insert the elastic into the top and bottom drawstrings of the double elastic waistband.

Pareo skirt

Cast on 52 stitches on knitting needles No. 3. Knit a 1×1 elastic band 1.5 cm high. Then knit the fabric up to 72.5 cm as follows: front row - edge. p., persons p. 1 p. remove, persons. p., remove 1 p., 46 p. knit, chrome. p. Wrong row: chrome. p., 46 p. purl, knit. p., out. n. remove, persons. p., out. n. remove chrome. p. Finish the fabric with a 1×1 elastic band, 1.5 cm high. Cast on along the length of the standing side where the edge loops are.

Tie a double elastic band 1 cm high. Close the loops. Cast on loops along the remaining sides and knit a half shuttlecock using stockinette stitch. In the first front row, before and after every 12th loop, yarn over. Tie 5-6 cm in this way, close the loops. Crochet a chain of air. p. 130 cm long and insert into the drawstring of the double elastic band.

The bright striped set consists of a swimsuit - bikini and bag. You can choose the colors of the stripes as you wish.

The highlight of this set is the jacquard flower on the shorts. You can tie small swimming trunks to this bodice to get a wonderful three-piece set.

Yellow knitted swimsuit - bikini

You will need: bikini yarn 150 g and tunic yarn 300 g yellow Mondial Tactel yarn (100% polyamide, 125 m/50 g). SPOKES: straight knitting needles No. 4,5 and No. 5; darning needle; hook No. 4; as well as 12 buttons.

Knitted skirt and swimsuit

You can prepare for your vacation very economically - for example, in this way, how to knit a swimsuit with your own hands. Choose any color and model - you still only need to pay for the yarn!

A bold look with a two-piece swimsuit

Do you want to get a beautiful and even tan? Pay attention to how to knit a two-piece swimsuit. This year, colors that emphasize the dignity of the figure are considered fashionable - black, white, brown.

You will need 2 packs of yarn chocolate color and one - orange (must contain 33% viscose and 67% cotton), a skein of nylon threads to match the color of the yarn, a crochet hook, large beads of blue turquoise color.

• From the very beginning of knitting, weave a nylon thread parallel to the yarn - it will help protect the item from stretching when wet.

• Guided by the diagram, tie the edge with red color.

• The bottom edge of the cups needs to be worked with three levels of single crochets. Sew the edges of the resulting strip, forming a “cover” through which you will later need to thread the ribbon.

• Tie a rope of the required length: make a chain of air loops, and from it - 1 row of single crochets. Using a crochet hook, thread the braid into the cups.

• Tie and sew the top ribbons of the bodice in a similar manner.

• Using red threads, knit your favorite version of starfish. Don't forget to weave beads according to the pattern.

• Sew the finished stars to the bodice.

• Diagram for the bottom of the swimsuit: first tie the front, then the back. Now you need to tie the parts together.

• Tie the edge of the swimming trunks in the same pattern as the bodice.

• Make and sew strings to the swimming trunks.

Ready! You can choose any color yarn you want.

Transformable swimsuit

Crochet swimsuits are very beautiful and original products that exist in a single copy. That's why best idea It’s impossible to figure out how to knit a transforming swimsuit!

Prepare 2 packs of stretch cotton yarn in the main color and 1 pack of an additional color - it holds its shape well and has good density.

• The swimsuit pattern in this case is classic - you can change the number of rows and loops depending on the size.

• Always try on your swimsuit so you don’t make a mistake with the size.

• In this model, the shape and fullness of the cup are not adjustable - connect them to each other by knitting the entire bottom row first with chain stitches and then with single crochets. Ties should be made according to the same principle - their order is indicated in the diagram.

• The hem pattern can also be adjusted depending on the desired height and fullness of the product - after all, each swimsuit is knitted individually.

• Tie several ribbons (the first row is made from chain stitches, the second row is made from single crochets), and then simply sew them together like a mesh.

• To hide the fasteners, make crocheted flowers: 8 for the top and 10 for the bottom of the “mesh”.

• Sew hook fasteners to the top and bottom sides of the mesh, and flowers on top of them.

The holes in the bodice and swimsuit bottoms seem to be specially created to secure and hold the central mesh part. If you want to sunbathe, remove the center piece; It will be just right for going to the pool.

If the designations in the patterns are not clear to you, or you are just learning how to crochet, be sure to read the article “Crochet - patterns for beginners”.

This video tutorial will tell you how to knit a one-piece swimsuit:

Dreams of summer and relaxation in women's fantasies intersect with swimsuits. It is desirable that it be ideal: it “fits” the figure, hides flaws, emphasizes advantages, does not stretch, does not lose its color for a long time, and is easy to wash and dry.

And also, it must be in a single copy, so that friends, acquaintances or strangers would envy, and men would literally “break” their necks.

We invite you to try to create such a swimsuit with your own hands. To begin, you will need a hook and thread. Any swimsuit can be crocheted by adding the necessary elements to the idea. The purpose of this article is to give the most accurate instructions and answer most of the questions that a knitter has, and to show the finished work.

They will help you gain motivation, create something similar or a completely different creation in the same style.

Threads

What threads should I use to crochet a swimsuit?
Their quality and thickness will influence whether your swimsuit feels like a warm sweater or dries in minutes. Professional knitters recommend choosing threads that contain elastane.

Swimsuits are knitted using synthetic threads, such as diva or diva stretch, viscose. Natural: cotton tulip, choose thin threads, and a hook up to 2, but it’s better to be thinner, then you can avoid loose knitting.

If you decide to knit from begonia and have thicker threads, then after getting wet it becomes stiff and heavy, especially if your knitting is tight.

Models
For those who have been looking for crochet swimsuit models for a long time, it may seem that they are all the same. We would like to show you all the variety of swimsuits that we managed to find.

Three craftswomen who know how to crochet perfectly provide us with this opportunity.
Olga Ushenina, Lilya Ulanova, Olga Yurovsky.
Olga Ushenina, she specializes in swimsuits. She makes her masterpieces not only with the help of a crochet hook. Pay attention to the different shapes of bras.
Lilya Ulanova offers several models of crocheted swimsuits, although the range is not as wide as Olga’s, but Lilya knits the entire set with you, loop by loop, from 1 loop to the finished product.
Olya Yurovski has in her arsenal only 1 model for small breasts, take into account if you like her swimsuit.

Breast size and secrets for a crochet swimsuit

We knit a swimsuit for small and large breasts
Small breasts
Swimsuits for small breasts are lighter, but if you want to enlarge them, the process of creating a swimsuit will be similar to a bra for large breasts. If you plan to put pillows in the cup, provide a pocket for this.

Big breasts
The bones and cups are of the required shape, but not thick.
When choosing a model for large breasts, keep in mind that the width of the straps on the shoulders should be thicker so that the straps do not cut into your shoulders.
When choosing a model, keep in mind that if the straps are tied around the neck, then big breasts will pull down.

How to crochet a swimsuit (patterns)?

Simple crochet swimsuit

Lilya Ulanova suggests crocheting the simplest swimsuit. For it you will need to knit a rectangle of the required size. To determine your bra size, measure the height of your bra and the width from the edge of the cup to the edge of the other.

Having knitted 1 row with single crochets, attach it to the bra without stretching it so that the size matches. Knitted in the back loop of the base, the result is knitting similar to an elastic band. Keep in mind that knitting stretches, we recommend making it 1-2 cm less than the finished product.

We tie the resulting rectangle with double crochets through 1 chain stitch. The holes are suitable for threading an elastic band so that the swimsuit stays on the body. We knit the side part through a loop to narrow the rectangle.

You need to thread the elastic around the entire perimeter of the rectangle and try it on. If you wish, you can tie a strap around your neck along the edges of the rectangle or in the middle, or you can get by with an elastic band.

This swimsuit will fit up to breast size 4; for larger breasts it will not look very impressive, and the straps will be difficult to hold the breasts.

Crochet swimsuits, difficulty level higher than beginner

As mentioned above, take into account the size of your breasts and for sizes smaller than 2 we use cups as desired, for sizes 3 and larger we use underwires.

Before you start knitting, you need a pattern. An old bra and panties will do for this. They will be the basis for creating a swimsuit.
It is necessary to accurately represent the pattern of the product, otherwise it will be difficult for you to knit the part. The second option is to constantly apply it to the finished product.

The basis for knitting a cup, look at the photo: for pink - a circle, for blue - 2 parts (stripe and petal), for white - a triangle, black and red - this is a round shape.

Crochet cups with underwire and foam cups

You need to attach the knitting to the bone. We take plastic bones and make holes for fastening or cover the iron bones in fabric so that they do not “climb out” of the knitting. Knit a strip of the required width and tie or sew a trimmed bone to it.

When the preliminary work is done, we move on to the cup, it needs to be hemmed along the edge, you can do it manually, like with an overlock, and the knitting will be sewn to this place.

We begin to knit with the chosen pattern or single crochets, knit a strip of the required width and length; if decorations are provided, then this strip can be narrower. Then we knit only part of the part, focusing solely on the bra cup. We sew the cup to the knitted parts, carefully straightening it. The cup performs the tasks of the lining, so there is no need to add it as well.

To avoid many questions, we take a few photos different models, so that it is clear what happened and how it was more logical to knit.

Video master classes for crocheting swimsuits from beginner to professional
From Lily Ulanova

From Olya Yurovsky

Swimming trunks model
Thongs are knitted similarly to panties, only narrower. The panties will resemble two large triangles connected in the middle by a rectangle.

Crochet process
1. We knit an elastic band in single crochets over the back loop of the base, equal to the volume of the hips or waist, depending on where you will wear them. Connect the resulting belt.
2. Mark the middle of the resulting front belt, and knit the required triangle, decreasing 1 loop on each side (we knit the last 2 loops together), knitting with single crochets. We apply it to our panties or thong and decide whether it’s enough or whether to continue.
3. We knit the rectangle with single crochets, without changes.
4. Then decrease it (for thongs) or increase it (for panties) and knit the back part.
5. Mark the center on the back of the belt and tie the resulting triangle to it.

Remember about the elastic band that should be threaded along the edge of your swimming trunks and cup so that nothing falls out or slides. You can use a hat elastic; we recommend sewing it into a ring, if you do not plan to do so, then tie it.

Have you already started, in your mind, to crochet a swimsuit using the suggested patterns? It's time to move on to choosing threads and a hook, let your swimsuit achieve its goal! Beauty, love, creativity to you this summer!