Autumn boots crochet pattern. Crochet knitted boots, detailed master class with photo and description

07.04.2020

On the street (especially in the warm season) you can often find boots, crochet. Yes, now this is far from uncommon in stores, but do such shoe models differ in any special originality? Those who have a crochet hook or knitting needles can try to make similar knitted stylish boots for every day with a crochet hook, also with their own hands. Can be found suitable pattern on the Internet or trust your imagination. Of course, two identical pairs of shoes will definitely not work. After all, such knitting can be compared with the manufacture of lace and openwork napkins. Another plus is that this option will come out much cheaper than similar boots in the store. It is worth noting that you can make such shoes both for going out and for home. Indeed, sometimes it is very pleasant to dress your legs in warmth on cold winter evenings. The best part is that making such boots is not difficult for either masters or beginners.

You will need:

The process of crocheting boots with diagrams and a description of the work

Knitting takes place in two strands, so that the boots later turn out to be boots (and not socks), and this will also serve to create a rather dense texture.

Sock:

Assembly.

Pre-sampling.

Some more useful information for beginners

You can tie boots absolutely different lengths. You can wear them both as boots and as ankle boots. If desired, they can be decorated with ribbons, beads or embroidery. Let your imagination run wild. Between the rows, you can still draw a thin decorative braid. To prevent the boots from flying off, towards the end you can narrow them a little. And in order for the boots to keep their shape, it is necessary to wash and starch them after manufacturing. Now you know how to crochet stylish boots for every day! Creative success to you! And nice shoes!

A selection of videos on the topic of the article

Shoes have been an integral part of our lives since the dawn of civilization. Residents of hot Greece, Egypt and Italy wore sandals, in the cold northern Scandinavian latitudes, fur boots were very successful. In Japan, they wore geta, which were a bench, the ancient Scythians and Sarmatians preferred narrow leather boots with a felt insole. Shoes were made from wood, fur, various fabrics, leather, papyrus, straw, and even palm leaves. The rich finish and material of the shoes emphasized the status of the owner. Noble and wealthy people decorated it with embroidery and precious stones. In ancient China, girls from the upper class in dowry had up to 16 pairs of shoes for various occasions.

Now in the wardrobe of every fashionista there are at least a dozen pairs of shoes, boots, ballet flats, sandals and ankle boots for different seasons and events. Fashion houses led by famous designers create new original collections every year. At the same time, you can make a unique pair of shoes with your own hands, it is enough to be able to crochet. Needlework masters create very beautiful crocheted boots both for going out and so that their legs feel comfortable at home.

You can crochet boots for cold autumn, and for hot summer. For the cool season, dense patterns and thick yarn are used for them, and for the warm period, it will be an openwork product made of light cotton threads, in which the legs will breathe. At will, they are decorated with various laces, ribbons, beads, beads, rhinestones and buckles.

It is very important when knitting to choose the right sole. Best Option there will be a sole from an old pair of shoes in which the leg felt comfortable, or, if the option without a heel is planned, purchase inexpensive slippers and knit boots based on them. In the first case, it will be necessary to tie the sole and glue or sew to the old block.

Strapping can also be done in several ways. Sew the finished sole with the selected threads, knit 1 row of st. single crochet and knit according to the selected pattern. Or take a ready-made thin insole, tie it with art. single crochet, knit according to the pattern, and then glue it on the finished sole.

For the shaft, heel and upper part of the sock, almost any pattern is suitable from dense zigzags and ribbon lace to loin mesh. At the same time, the toe and heel need to be strengthened, you can give them to a shoe shop for this, starch or knit them, adding a strong fishing line to the yarn.

For those who know how to crochet booties, it will not be difficult to knit boots. The difference will be only in the size of the product. Below are a few patterns for knitting the bootleg. The toe of the boot can be knitted together with the entire product, adding loops to expand the fabric, or knit as a separate part and attach after.

In the manufacture of crocheted boots with your own hands, it is important to periodically try on the product on the leg and adjust the dimensions. knitted details of necessity. And you can also make a mannequin for the convenience of work. To do this, put on a nylon sock, wrap the leg very tightly with tape in several layers. Cut the resulting structure and glue, keeping the volume. Fill with stuffing material.

And one more important point. All steps when knitting the first boot must be recorded so that the second one is similar.

bright summer boots yellow color decorated with flowers.

You will need:

200 g of 100% cotton yarn (170 m / 50 g);
The remains of multi-colored threads for flowers;
Finished outsole;
Hook No. 1.5 and No. 2.5.

Knit 1 - 2 rows of Art. without a crochet on the edge of the sole.

Sock and heel knit art. with a crochet. For the spout, select 7 loops in the center, knit to the required height of Art. with a crochet, adding in each row 1 tbsp. with a crochet on the left and right, knitting 3 loops each time on the very sole. To tie the heel without increments, in order for the product to fit better on the leg, it is necessary to make a decrease in several loops in the ankle area (orient when trying on).

Shaft knit in zigzag.

First r. 1 air. lifting loop, * 2 half-columns with a crochet, 2 tbsp. with a crochet, 2 tbsp. with 2 crochets, 3 tbsp. with 3 crochets, 2 tbsp. with 2 crochets, 2 tbsp. with a crochet, 2 half-columns with a crochet, 3 tbsp. single crochet *, knit from * to *, finish 2 tbsp. without a crochet. 1 connection Art. in the lifting loop.
Second r. 3 air. lifting loops, 7 tbsp. with double crochet, * knit in the next loop (1 st. with double crochet + 2 air loops + 1 st. with double crochet + 2 air loops + 1 st. with double crochet), 8 tbsp. double crochet, skip 1 loop, 8 tbsp. with a crochet *, knit from * to *, finish 2 connections. columns.
Third r. 3 air. lifting loops, 6 tbsp. double crochet, * skip 2 loops, in st. with a crochet of a row below, knit (1 st. with a crochet + 2 air loops + 1 st. with a crochet + 2 air loops + 1 st. with a crochet), skip 2 loops, 7 tbsp. with a crochet, 2 tbsp. with a crochet with one top, 7 tbsp. with a crochet *, knit from * to *, finish 2 tbsp. double crochet with one top, 1 connecting post.
Knit further according to the scheme.

Flower. Take hook number 1.5.

Close a chain of 5 air in a ring. loops.

First row. Link 5 arches out of 10 air. loops, fixing them Art. without a crochet in the ring.
Second row. In each arch, tie 29 tbsp. without a crochet.
Third row. 2 adjacent arches knit 2 tbsp. without a crochet, 2 half-columns with a crochet, 9 tbsp. with a crochet, in the next. 3 loops knit 2 tbsp. with a crochet with one base, 9 tbsp. with a crochet, 2 half-columns with a crochet, 2 tbsp. without a crochet. In 3 other arches, tie 30 tbsp. without a crochet.

Blue pineapple boots.

You will need:

Ballet flats as a basis;
200 g of blue ribbon yarn;
Hook No. 1.6;
Transparent glue for fabric.

For one boot, it will be necessary to knit 2 "pineapples" for the front and arrange them in a mirror, 2 halves for the sides and 1 "pineapple" for the back. Attach the details on the leg mannequin, it will be clear where you need to knit st. without crochet and art. with a different number of yarns to fill the gaps.

In order for the knitted part to fit well to the ballet flat, it is necessary to fold the last row of st. with a crochet on the toe of the boot in half and knit st. with a crochet on the sides.

Top and bottom tie st. without a crochet, while the lower rows need to be pulled together a little, adjusting to a ballet flat.

Glue the knitted part to the ballet flats.

Decorate as desired with beads or beads. In order for the boot to keep tighter on the leg, tie a caterpillar lace or just a chain of air. loops and 2 rows of Art. without a crochet.

Pineapple pattern.

Dial 14 air. loops.

First row. 3 air. lifting loops, 2 tbsp. with a crochet with a common base, skip 3 loops, 3 tbsp. with a crochet with one base, 1 air. loop, skip 3 loops, 3 tbsp. double crochet with one base, skip 3 loops, 3 tbsp. double crochet with one base.
Second row. 3 air. lifting loops, skip the loop, 2 tbsp. with a crochet with one base, skip a loop, 3 tbsp. with a crochet with one base, skip a loop, 1 air. loop over air loop of the row below, skip the loop, 3 tbsp. with a crochet with one base, skip a loop, 3 tbsp. double crochet with one base.
Third row. It is necessary to knit an additional chain of 7 air. loops on both sides. 3 air. lifting loops, 2 tbsp. double crochet with one base, skip 1 loop, 1 air. loop, skip 1 loop, 3 tbsp. double crochet with one base, skip 1 loop, 1 air. loop, knit 9 times (1 double crochet, 1 air loop), skip 1 loop, 3 tbsp. with a crochet with one base, 1 air. loop, skip 3 loops, 3 tbsp. double crochet with one base.
Knit further according to the scheme.

Pink boots with a fantasy pattern.

You will need:

Finished block;
Shoe glue;
insoles;
200 g of pink cotton threads;
Hook number 2;
Flowers for decoration (optional)

Tie the insoles tightly with 2 rows of Art. without a crochet.

Heel. Knit 10 rows of half-columns with a crochet on the back half of the sole.

Sock. Select 10 central loops, knit 2 rows of art. without crochet and 10 rows with half crochets, adding 1 loop on both sides and knitting 2 side loops. Next, knit with a fantasy pattern to the heel. Sew the junction of the toe and heel. Knit with a fancy pattern up for the bootleg 21 rows in return rows (lifting loops with inside boot. Finish with 2 rows of Art. without a crochet.

Fantasy pattern.

First row. 3 air. lifting loops, skip 1 loop, knit a loop next (3 stitches with a crochet with one top + 3 air loops + 3 stitches with a crochet with one top), * skip 3 loops, next. knit a loop (3 sts with a crochet with one top + 3 air loops + 3 sts with a crochet with one top) *, knit from * to *, finish 1 loop skip 1 tbsp. with a crochet.
Second row. 3 air. lifting loops, 1 air. loop, 3 tbsp. with a crochet in an arch of 3 air. loops, 1 air. loop, 3 tbsp. with a crochet in an arch of 3 air. loops, continue to the end of the row, finish 1 tbsp. with a crochet.
Third row and all odd. Knit similarly to the first in each middle of the three sts. with a crochet.
Fourth row and all even. Knit like a second.

Tie a lace (chain of air loops + 1 row of st. without a crochet), thread through the holes of the pattern from the inside.

Glue the knitted part to the finished shoe last.

Boots with cuffs and twisted lace.

You will need:

100 g mercerized cotton (1000 m / 100 g);
200 g polypropylene (500 m / 100 g);
Hook number 2;
Finished shoe last;
insoles;
shoe glue.

Boots knit in 2 strands.

First, tie the insole. This scheme is presented for size 36, it is easy to change it by increasing or decreasing the number of loops and rows. It is important not to knit knots when making the sole, after completing the upper part, pull the working thread through the extreme loops. At the end of the knitted insole, knit with connecting posts to the center of the notch on the inside (from here knitting starts up).

First r. Knit st. with a crochet in each loop.
Second r. Mark the loops of the spout and tie the 2 extreme ones as 2 tbsp. double crochet with one top.
Third r. Decrease nose and dec 3 stitches (2 stitches with double crochet with one top) on the heel. Do not cut the thread.

Sock. Select 7 loops in the center. Attach a new thread and knit 7 rows, securing the extreme loops with connecting posts to the sides. Fasten and cut the thread.

Continue with the main thread. Knit 4 rows in a circle. For the next 7 rows, decrease by 3 loops until the hole is slightly larger than the circumference of the ankle. Knit 2 rows without decreases. Then knit 22 rows with increments (2 stitches with a crochet with one base) until the girth of the boot matches the girth of the shin.

Lapels. Knit 6 rows in ribbing. The last row of st. without a crochet. Turn down.

Lace knit according to the scheme. Its length on the model is 60 cm. It varies if more or less turns around the boot are needed.

Attach the lace, as in the photo, glue the knitted part to the finished shoe last. Insert insole. To make the boot fit better on the leg, the heel and the sock can be starched.

Dial 45 air. loops + 3 air. lifting loops.

First row. Knit st. with a crochet, knit a half-column with a crochet in the last loop.
Second row. 1 connecting post, 1 tbsp. single crochet, 1 half-column, 2 tbsp. with a crochet, 5 tbsp. with 2 crochets, 4 tbsp. with a crochet, 7 half-columns with a crochet, then knit st. double crochet to the end of the row.
Third row. 1 connection column, 2 semi-columns, 18 tbsp. with a crochet, 1 half-column, 1 tbsp. single crochet, 1 connecting column.
Fourth row. 4 connecting posts, 2 tbsp. without a crochet. 2 half-columns with a crochet, 3 tbsp. with a crochet, 4 tbsp. with 2 crochets, 2 tbsp. with a crochet, 2 half-columns with a crochet, 2 tbsp. single crochet, 1 connecting column.
Fifth row. Fits in with reverse side the original chain (from the heel). 3 air. lifting loops, knit st. with a crochet, 1 half-column with a crochet, 1 tbsp. single crochet, 1 connecting column,
Sixth row. 3 connecting posts, 1 tbsp. without a crochet, 1 half-column with a crochet, then st. with a crochet, 1 half-column with a crochet, 1 tbsp. without a crochet.
Seventh row. 4 connecting posts, 20 tbsp. without a crochet, 5 half-columns with a crochet, 3 tbsp. with a crochet, 3 half-columns with a crochet, 1 tbsp. single crochet, 2 connecting posts.

Rubber band pattern. Above the convex columns knit convex, above concave - concave, start row 3 air. lifting loops, finish with 1 connecting post.

Connect in a ring 6 air. loops.

First row. 3 air. lifting loops, 5 tbsp. with a crochet in a ring, 3 air. loops, 1 connecting column in the ring.
Second row. 3 air. lifting loops, 5 tbsp. with a crochet in an arch of 3 air. loops, 3 air. loops, 1 connecting column in the arch of 3 air. loops.
Knit further according to the scheme as the second row.

Very lightweight boots sirloin net.

You will need:

200 g of cotton threads;
Hook number 2 - 2.5.

Sock and heel are knitted st. without a crochet, similarly to the previous options, the shaft is connected with a sirloin net (1 st. with a crochet + 1 air loop). Tie the top with 3 rows of Art. without a crochet.

In the warm season, you can often see crocheted knitted boots on the streets. Thanks to a large selection of shoes of various types and models, nowadays you can buy knitted boots in almost any shoe store or market. As a rule, such women's shoes does not differ in particular originality, since all models either look the same, or differ slightly from each other. Therefore, women of fashion always keep track of the most fashionable trends.

Knitted boots

But if you are familiar with the technique of knitting or crocheting, you can easily knit beautiful and original knitted boots for yourself. Knitting patterns for such shoes can be selected on the Internet, and the pattern for knitted boots you can choose the one you like best.

knitted summer boots

Another indisputable advantage of such shoes is that knitted summer boots do not require large material costs. All you need is knitting yarn and a crochet hook or knitting needles. If you are not a very experienced knitter, you can simplify your work. To do this, you will need a pair of old shoes (shoes can be with or without heels) or ballet flats that just need to be tied with thread. In this way, you will not only knit new durable boots for yourself, but also solve the problem with old shoes, which you don’t seem to be wearing anymore, and it’s a pity to throw them away.

For experienced needlewomen, crocheting or knitting summer boots to order can be an additional type of income, because very often on the Internet you can see the ad "I will buy knitted boots."

You can knit fashionable women's boots in several ways, while the frame can be hard or soft. The sole for such shoes can also be knitted with your own hands, or you can use the sole from old shoes if it is in good condition.

There are several types of knitted boots: fishnet boots for warm weather, glamorous stocking boots, tight winter or cozy home boots.

To crochet summer boots, you will need: a crochet hook or knitting needles, strong yarn (it is better to opt for linen, cotton or silk), the sole from an unnecessary pair of shoes, strong threads, an awl, a small skein of fishing line and glue.

Due to the fact that summer boots fit openwork pattern, they not only look beautiful, but are also comfortable and comfortable in the warm season.

Crochet knitted boots

First of all, you need to take measurements for future shoes by circling the foot on a sheet of cardboard and measuring the height of the rise. This is especially true for those who want tight fitting crochet boots. The patterns and patterns of knitting such shoes are practically no different from knitting free-cut boots.

If you are knitting boots for the first time, it is better to spend a little time studying and preparing a pattern that you can use to make a boots pattern. This will make it easier for you to work further, since nothing will have to be dissolved and bandaged again.

If you do not have a suitable sole for future knitted boots, you can purchase it at a store or shoe repair shop.

When choosing yarn, pay attention not only to its composition and quality, but also to its shade. Remember, white and all light shades are very easily soiled, so to make your boots look neat, you will have to wash them quite often, which can also affect their appearance. Of course, white boots look very elegant and beautiful, but if you wear them every day, they are unlikely to serve you for a long time. The size of the hook and knitting needles should correspond to the density of the yarn, but in any case, for the summer version of such shoes, you should not choose a large hook.

To determine the pattern and its density, you will need to knit a small fragment of the selected pattern and calculate required amount eyelets The upper and lower parts of the boots are knitted separately, and then connected to each other. In order to securely fasten the parts, to working thread you need to add string. You also need to consider that the upper part of the boots should be slightly larger than the circumference of the sole, otherwise folds may appear that will spoil appearance boots. To avoid such a mistake, consider this point when drawing up a boots template. The finished shoes will look much prettier if you starch them.

Knitted boots: master class

For boots of the thirty-eighth size, you will need: one hundred grams of dense cotton yarn, a crochet hook and a sole from an unnecessary pair of shoes.

The knitting density of one star is seven and a half by seven and a half centimeters.
The side part of the boots is knitted in the following way: the first row is knitted with single crochets; in the second row, a single crochet is knitted above the column of the first row, an air loop is knitted above the second column of the first row, and a single crochet is knitted above the third column of the first row. In this way, you need to knit to the end of the row.

To tie an asterisk, you must first make a ring consisting of eight air loops. In the first row, eleven single crochets are knitted into a ring. In the second row, a double crochet is knitted over all the columns of the first row, and three air loops are knitted between them. In the third row, three columns are knitted into the first arch, five air loops and three columns (the first column is knitted without a crochet) twice into subsequent arches. In this way, knit to the end of the row, where you should have one arch left.

First you will need to tie individual stars, the number of which will determine the height of your boots. For example, four stars are enough for low boots. To make the shaft, the stars need to be connected together in a circle. After that, you can start knitting the top of the boots. To do this, you need to circle your foot on paper. You also need to measure the lift height. To make the boots neat and wrinkle-free, the circumference of the sole should be two centimeters less than the top of the boots.

You will need one star for the top of the front of the shoe, only for it in the third row you need to knit two single crochets and four air loops into all arches.

To tie the toe, dial a chain four centimeters long. On the sides of the shoes, knit a pattern, adding loops evenly until the width of the fabric reaches fifteen centimeters. The toe of the boot should be seven centimeters long.

When you knit the last row, instead of three central patterns, knit one air loop and two columns without a crochet, then connect the toe with an asterisk using two arches. When the height of the sides reaches six centimeters in the middle of every second row, the stars must be connected to three arches. When you have three arches left, continue knitting straight, without knitting four centimeters to the heel. These four centimeters need to be knitted across. You need to connect the parts of the boot to each other with single crochets and double crochets. Finished boots will look better if starched.

Those for whom knitted boots with patterns seem like a difficult task can try to knit original boots based on old shoes.

They are made quite simply, and thanks to the hard sole, the appearance of such boots will not be spoiled by long wear or regular washing.

To knit such light fishnet boots, you will need: ballet flats or slip-ons with rubber soles (the color of the shoes must be selected according to the color of the future boots), one hundred grams of yarn, a large needle and a hook.

First you need to sheathe the base - the shoes are round, and try to place the chain stitch (it is also called a chain) as close to the sole as possible. After that, you need to start crocheting with double crochets, which are knitted around in each of the links of the chain stitch. The base must be tied tightly so that it looks completely tied with yarn. If necessary, in certain places you can add and subtract loops. In this way, you will need to knit about eight rows.

When you tie the toe and heel of the base, instead of double crochets, you will need to knit double crochets. After that, you will need to tie a pipe with an openwork pattern, which will be the top of the boot. The finished bootleg must be sewn to the tied shoes. The top of the boot can be decorated with a beautiful border, and so that the boots do not slip, the top of the border can be slightly narrowed. When the boots are ready, they need to be washed and made more rigid. To do this, after washing, soak the boots in a solution of water and PVA glue in a ratio of two to one.

Detailed master class: How to crochet boots from square motifs

Master Class: Crochet boots

Nowadays, boots are an integral part of women's wardrobe. For winter colds, there are warm leather models, with fur and embossed soles. Autumn models save women's legs from getting wet, but summer boots become just a beautiful and stylish accessory.

When did boots appear? According to archaeological data, the appearance of shoes dates back to about 25 - 30 thousand years ago in North America. There are also a few samples discovered later in the territory of ancient Egypt, in Africa.

In those days, shoes were highly dependent on climatic conditions. In hot countries, the Greeks, Romans and Egyptians of antiquity wore mostly sandals, while the northern peoples preferred warm leather shoes and boots.

The Scythians preferred soft, narrow and high leather boots, into which they tucked their pants. They resembled a stocking and were attached to the leg with special straps. Such products were decorated with embroidery and fur. At that time, both women and men wore boots, while female models were with short tops, and they were made of red leather. This color was considered the most beautiful. Often they were embroidered with ornamental patterns.

In Europe, boots are first mentioned in the 15th century. They served primarily men's shoes riding. They were very long, above the hips of the model. During the time of the French king Louis XIV, over the knee boots with square socks, high heels and spurs were very popular. In the middle of the 18th century, bright and pointed models became fashionable. By the 19th century, it was gradually replaced by the popularity of low shoes trimmed with fur.

Like many other things, boots at the very beginning were an indicator of the social level and level of wealth of a person. For example, in Russia only the upper classes flaunted morocco boots, while among ordinary people on his feet were bast shoes and pistons. During the reign of Peter I, the popularity of boots became much less, but by the end of the 19th and beginning of the 20th centuries, almost all men in Russia wore boots. In the female version, there was a shortened shaft and trimmed with red morocco or cloth. The twentieth century was also marked by the creation of an asymmetric insole, which repeated the outlines of the foot; before that, shoes were not divided into right and left boots.

Now you can find a model for every taste, from the most different materials, with heels, wedges or flat soles. Like any accessory that affects the whole image, boots handmade will always be out of competition. One of the varieties of such products will be crocheted boots.

In this article, we will offer several options for boots models, crocheted. They will all have one thing in common - a finished sole. And then there are options.

The first one is to give a second life to old shoes. It is quite possible that you have a pair of shoes, boots or even ballet flats lying around, the top of which is damaged. It may have been dirty, torn, or just worn out, but this pair has a very comfortable last. Then your new boots will not rub your legs under any circumstances and will become a great new, beautiful accessory in your wardrobe.

The second option is a new sole. Here, too, there is scope for creative activity and imagination of needlewomen. For example, you can make a knitted part, and then take the boots to a shoe shop and entrust the attachment of the sole to a specialist. Another option would be to buy comfortable slippers, perhaps even homemade ones, and turn them into beautiful boots. Typically, such shoes have a comfortable, soft and very often rubberized sole. Boots on this basis will perfectly withstand the street weather.

The next step is to choose threads. Everything will depend on what season you will be knitting boots for. If you want to make tight boots for fall or spring, use a wool-acrylic blend. The latter should be more, it is due to the artificial acrylic component that the product will be non-prickly, pleasant to wear and durable. For summer models choose cotton or blended threads with the addition of the same acrylic, viscose. Lightweight and breathable, these threads are perfect for warm weather, and the legs will be comfortable in them.

Crochet boots

Option 1

You will need:

Yarn 80% acrylic, 20% wool (in this master class black and yellow, but of course you can choose other colors) 135 m / 50 g;
Yarn "grass" yellow;
Hook number 3;
Slippers with a comfortable sole without a back;
Awl.

We will knit with a thread in two additions. The fabric part of the nose of the slipper must be cut off, leaving the very tip. We do not throw it away, it will come in handy later.

Now you need to make holes with an awl at an equal distance around the perimeter of the slipper. We pierce with an awl from the side in such a way as to capture part of the rubberized sole and insole. Now you need to make stitches with black yarn, as in the photo. We fix the thread, but do not tear it off.

We knit 1 row with connecting posts. The number of loops in each stitch will depend on the width of the stitch and the thickness of the yarn.

We knit the next row. s / n threads of yellow color.

To do this, you need the fabric part, which was cut off earlier. On paper, you need to make a spout pattern using the dimensions of the cut out part.

According to them, we perform the calculation of loops and knit the nose of Art. s / n.

Advice! Record all your actions and performed calculations. This will help when knitting the second boot.

Now you need to sew or tie the s.s. spout to harness. Try on the product, you may need to adjust the number of loops.

The next step is knitting the heels. We carry out Art. s / n. We attach to the sides of the spout with the help of s.s. It will take about 2-3 rows.

According to the scheme below, we knit the bootleg.

First r. 3 v.p.p. 1 vp, 3 tbsp. s / n in the same loop of the base, * 1 ch, skip 3 loops, 1 tbsp. b / n, 1 ch, skip 3 loops, knit in the 4th (3 tbsp. s / n, 1 ch, 3 tbsp. s / n) *, continue from *, finish row 2 tbsp . s / n in the first loop and 2 s.s.

Second r. 1 vp, * 3 vp, now we knit 3 tbsp. s / n with a common base and top in art. b / n of the first row, again 3 ch, 1 tbsp. b / n in 1 cp between triplets. s / n from one base *. We continue from *, we finish 1 s.s.

We knit all subsequent odd rows, like the first, even - like the second. The pattern will go in a checkerboard pattern, shifting every two rows.

Shaft length - individual. We knit the last two rows of the pattern with a contrasting thread.

Then we tie with two rows of Art. s / n yarn of the second color. Now you need to tie the yarn "grass". For her, you can take a hook of a larger number.

Now we knit a strap for decoration with a yellow thread. First row st. b/n. second row st. s / n and the third row of art. b/n. The length will depend on the circumference of the ankle. Now we need to connect the chain of cp. black yarn of the same length as the strap, and insert it between st. s / n.

Sew on the strap. On the outside we decorate with a button. It remains to knit a pair of boots.

Option 2

For those who prefer refined and elegant simplicity, we offer the following options.

The principle of attaching to the sole and knitting is the same. You can use different colors as a decor by tying the boot tops with stripes or decorate with flowers.

Option 3

Crochet boots with scales pattern

This knitting option is also called "crocodile skin". Not a single animal will suffer, and you will become the owner of "crocodile skin" boots.

In this model, it will be necessary to attach the sole after knitting, since here we also make the insole with a hook. Of course, you can take the finished sole and do the manipulations described above for tying it. Then knit according to the spout pattern suggested below. Try, experiment.

We start knitting from the sole. The work will take place in a circle (or rather an oval, but the principle is the same). In order to calculate the number of air loops in the set, it is necessary to measure the length of the foot and its width. Now subtract the second from the first value. The resulting digit* will be the length of the initial chain. We knit a sample of 10 x 10 cm and calculate the number of loops * in one centimeter. We multiply two numbers with * and get the number of loops in the typesetting row.

So, a chain of c.e. recruited.

First r. 3 v.p.p. and another 5 st. s / n in the same base loop. Now we knit st. s / n. in the last loop we knit 6 tbsp. s / n and go to knitting on the second side of the typesetting row. We finish 1 s.s. in the 3rd v.p.p.

Second r. 3 v.p.p. + 1 tbsp. s / n in the same loop, in the next five loops we knit 2 tbsp. s / n with a common basis, then 1 tbsp. s / n. In 6 st. s / n knitted from a common base we knit 2 tbsp. s / n. on the second side of the oval we continue to knit st. s / n. We finish 1 s.s. in the 3rd v.p.p.

Third r. We already have a small oval. The narrow sides consist of twos of art. s / n, knitted from one base, 12 loops from each edge. In these loops we knit 2 tbsp. s / n with a common base, alternating with 1 tbsp. s / n. It turns out 18 loops. Next, knit 1 tbsp. s / n on the side wide sides.

In the fourth row, along the edges on 18 loops, we knit 2 tbsp. s / n with a common base, alternating with 2 tbsp. s / n. It turns out 24 loops. We knit the wide sides, as usual, without increments.

The size of the sole is determined individually. You can make a drawing of the foot and periodically try on the work.

When the sole is finished, we continue to knit the toe and heel without breaking the thread. Thanks to the rubber band pattern relief columns, the finished boot will sit tightly on the leg.

Below is an example knitting pattern. The pattern will be saved, only the number of loops in the rows will change.

We knit one (first) row with simple st. s / n without increments.

Second r. we knit in a circle with embossed purl (concave) st. s / n. Please note that in the diagram the wider rows are the heel and nose.

Third r. We knit alternating convex and concave columns. It turns out an elastic band 1 x 1. Follow the pattern. Periodically try on the boot to adjust the number of loops.

To move on to knitting the bootleg, it is necessary to knit 1-2 rows of simple sts. s / n.

We begin to knit the bootleg with a “scales” pattern. Work is done in a circle. Below is a diagram.

First r. 3 v.p.p. + 1 tbsp. s / n in the same loop, * 2 ch, skip 2 loops, 2 tbsp. s / n with a common base *, continue from *.

Second r. we knit in the opposite direction, using the bodies of twos of columns with a crochet as a basis. 3 v.p.p., 4 tbsp. s / n (we introduce a hook between two st. s / n. and the right column serves as the base) + 1 ch. + 5 tbsp. s / n (we introduce a hook between two st. s / n, and the left column serves as the base). For convenience, we turn knitting upside down. Every first 2 tbsp. s / n with a common base serve as an arch for (5 st. s / n + 1 VP + 5 st. s / n). Every second 2 tbsp. we don’t knit s / n with a common base, when moving between scales we perform 1 ch.

Third r. Turn knitting back. We knit similarly to the first row. Fourth r. we knit "scales" in a checkerboard pattern relative to the second row.

The height of the top will depend only on your desire. The last row to perform art. b/n.

As additional decor can be sewn on the outer edge of the button.

Option 4

Crochet boots with funny pom-poms

We also carry out this model with a knitted sole.

You will need:

Thin and thick acrylic yarn;
Hooks No. 4.5 and No. 5.

The sole is knitted similarly to the previous model. You can choose any other oval scheme on the Internet.

We knit the last row without increments of art. b/n.

We knit the upper part not from the bottom up, but along one long and narrow canvas. With hook No. 5 we collect a chain of 17 ch. thread in two additions (thick + thin). We knit in return rows with a crochet No. 4.5 half-st. s / n for the back half-loop. When the length of the fabric reaches the length of the leg circumference (this is about 30 rows), we finish knitting. We connect the resulting tape into a ring. We fix the thread, cut it off and hide it.

We will knit the bootleg from the top of the boot, fixing the loops of the first row into the side stitches. s / n, they act as a set of rows. We knit in return rows.

First r. we knit, alternating 2 tbsp. s / n in 1 lateral semist. s / n and 1 tbsp. s / n in 1 lateral semist. s / n.

The second, third and fourth rows are performed with embossed st. s / n.

Starting from the fifth row, we perform the narrowing of the bootleg. To do this, select 4 symmetrical loops at an equal distance from each other. We knit this row. s / n, in the marked loop we perform 2 tbsp. s / n with a common top. We knit for the back wall.

From the 6th to the 9th rows we knit with embossed st. s / n.

10th p. We knit similarly to the 5th, reducing four loops at an equal distance.

The 11th and 12th rows are performed with embossed st. s / n.

We begin to knit the rise of the boot.

The beginning of the 13th row is the central point of the future heel. Select the opposite central point of the future spout. We also mark the loop before and after it. Now we knit st. b / n to the loop in front of the middle loop of the spout. Here we knit 10 ch. and knit in them 3 v.p.p. and further a number of Art. s / n.

We got a branch for the spout.

We fix this strip from Art. s / n on the shaft in the loop located after the third marked. We knit further Art. b/n. We finish 1 s.s.

The next rows will be performed in a circle. s / n.

14th p. At 3 v.p.p. we knit branches for the spout 5 tbsp. s / n. finish row 1 s.s. in the 3rd v.p.p.

15th p. performed similarly to the 14th, in 5 tbsp. s / n, knitted in an arch of 3 ch spout, we knit 2 tbsp. s / n with a common base. Now the width of the spout is already 10 loops.

We knit rows 16 and 17 without increments of art. s / n.

We turn the work and knit the 18th row of semist. s / n. we fix the thread.

Now you need to connect the parts using 1 row of s.s. The line will be embossed.

The seam of the connection of the upper part of the boot (it is located across the rest of the knitting) is located at the back. It is necessary to tie a chain of ch with a thread in two additions. about 1 meter long. Mark its center and fasten on this seam.

Attach 1 pom-pom to each end.

How to make pom poms

To create pompoms, you will need two cardboard circles. They need to cut out the central round part and a small piece along the radius.

We fold the circles so that all the cut parts match. Now we begin to wind the thread without breaking away from the ball. The larger and denser the winding, the fluffier and more magnificent the pompom will turn out. When you consider the number of turns sufficient, you need to cut the wound threads along the circle with scissors. Now you need to slightly separate one cardboard from the other, place a piece of thread in the resulting hole. Now we tie it around a bunch of threads, align the cut ends and remove the cardboard. Shake and get a cute pom-pom.

We attach them to the ends of the chains and tie them beautifully by making several turns around the leg.

Knitted bootshave already firmly entered our lives, and many girls dream of creating such light and surprisingly beautiful shoes for themselves. A master class from Lyudmila Kondratova will help you createknitted boots. Scheme and detailed wizard-Class are waiting for you.

For work we need:

1) sneakers (or rather the sole)

2) felt insole

3) leatherette/leather

4) cotton fabric

5) awl

6) hook

7) threads of two colors (choose a rather dense and stiff cotton yarn that will keep its shape well)

Step 1. Preparing the insole and sole binding

Glue the felt insole on one side with cotton fabric, on the other with leatherette

We remove the fabric top from the sneaker, to strengthen the toe and heel, we leave the fabric in these places.

Pierce the sole of the sneaker with an awl at a distance of 3-4 mm from each other and 2 mm from the edge, and tie a row of single crochets into the resulting holes.

If you left a fabric pad on the toe, then we tie it here as follows:

This is how the knitted sole for boots crocheted from the front and from the wrong side looks like:

Step 2. Knit the bottom of the boot

In the center of the bow of the sole we attach a thread and knit 2 rows of single crochets.

We knit the 3rd row like this: lifting loop, 3 tbsp. without nak. We unfold the knitting and in the second loop from the hook we knit st.bez.nak. and then 6 tbsp without a crochet.

After knitting 7 sbn (single crochet), we check that they are exactly in the center of the sock. Next, we knit another 2 s.b.n. that are on the sole

We unfold the knitting and knit the next row: we start knitting from the second loop, knit the row to the end and knit 2 loops on the sole, turn the knitting again:

We unfold the knitting and knit a new row in the same way as the previous one. We continue until our knitted sock will not hide woven. And so that the fabric does not twist, it is better to sew them with a matching thread with a knitted sock.

As a result, the author knitted 22 rows on the toe, and in the last row there were 28 s.b.n. Try on your leg and see if you should knit further, or if you can stop. Tip: in the process of knitting, try on what you get and adjust the number of loops and rows.

We turn the work over and start knitting from the third loop, and after the row is completed, we knit 2 more loops from the sole. Expand knitting

In the third loop, we begin to knit a row, knit a row to the end and knit 2 loops from the sole:

Next, we knit a toe: additions were made until the 26th row, as a result, the author got 31 loops, 27-28 rows - we knit without increments, 29 rows - 1 increase (32 loops will turn out in a row), 30-31st rows without an increase, 32nd row - one increase (33 loops in a row), and then up to 36 rows inclusive, one increase is made in each row.

You may have a different number of loops, so write down the entire knitting progress so that the second boot is the same as the first.

Step 4. Knit the heel

After you have tied the toe, we go down to the sole and knit the heel with single crochets, skip the corner loop, then knit it to the junction of the sole and the toe and also skip the ugly loop (which is highlighted in the photo with a yellow circle)

We unfold the work, and start knitting from the second loop, we knit the heel with single crochets to the angle between the heel and toe. After we have reached the corner between the heel and the toe, skip the corner loop and knit the connecting loop into the first loop of the toe. Expanding work:

We have a connecting loop on the hook, and start knitting from the second loop of the row. We continue to the corner between the heel and toe, and repeat the previous paragraph.

When the heel reaches the desired height, we knit 4 sc in a circle. At the same time, in order for the boot to fit snugly on the leg, you may have to reduce the loops or take a smaller hook.