For beginning craftsmen, a crocheted napkin can be an excellent start to a “career” in the world of needlework. Napkins, crocheted, they turn out to be lace, quite simple at the same time unusual and very beautiful. The master can use a decoding of the patterns or a ready-made description of the work to knit many different napkins.

Crocheted napkins turn out to be lace, quite simple and very beautiful.

For this work you need to select threads. A beautiful openwork napkin will turn out if the master chooses the right thread. Beginners are recommended to use “Magic” or “Crochet” threads in their work.

So, the work is done step by step:

1. Before you use the patterns that help you knit such products, you need to remember that the napkin is knitted from the center. A chain of air loops is formed. Their number depends on the desired size of the job. In the diagrams, such loops are depicted as a small circle. As a standard, 12 chain stitches are cast on.
2. The first loop is connected to the last using the half-column method. It should be a ring. The work will be done from right to left.
3. To lift the product, you need to crochet a few more air loops each time. Thanks to this, the yarn increases in size. If this is not done, then each next row will be crooked or beveled, and knitted napkins shouldn't be like that. Add 3 stitches to the first row. This is enough to lift the product.
4. To make the work openwork, you need to knit so that you get holes. This is done using a yarn over. It can either alternate with each air loop, or be done in a certain place.
5. When the napkin is almost ready, the hook is inserted into the ring. The last column must be connected to a chain consisting of 3 air loops.

At the end of the work, the thread is torn off and attached from the inside out. You need to leave a tail of thread at least 8 cm long.

Gallery: crochet napkin (25 photos)

Simple round crocheted napkin (video)

How to crochet a square napkin: instructions for beginners

Square napkins look very elegant.

The work is carried out in stages:

1. We knit air loops. You need to form a ring out of them. Then 6 loops are made on the hook from the ring. In order for the first loop in the row to connect to the last loop, you need to make one single crochet. As a result, a ring should form.
2. The first row should be knitted with columns. Threads are not made. After 3 chain stitches have been completed, 15 double crochets are performed in the center of the ring. The work is connected by connecting the first and last column.
3. In the second row, 3 air loops are also made. The next two posts are made in the loop from which the chain was made.
4. Then the double crochet from the previous row must be skipped.
5. In this way, 3 pillars are completed. 2 air loops are added.
6. These steps are repeated until you run out of stitches. Then the ends of the row are connected by a half-column. There is no yarn over.
7. In the next row, the actions are similar, that is, the row begins with adding 3 chain loops and ends with threading the yarn into the last loop.
8. The fourth row is knitted with pillars. Threads are not made.
9. Next you need to knit differently. To give the product an openwork look, double crochets must be alternated with single crochets. It is recommended to do 5 by 5.
10. After several rows have been knitted in this way, you need to reduce the pillars.
11. The next row uses single crochets and double crochets.

Square napkins look very elegant

The last step is to secure the end. The thread is not cut at the yarn itself; you need to leave a tail at least 8 cm long so that it can be secured.

Knitting a simple rectangular napkin

Rectangular napkins often decorate tables in restaurants and family dinners. So why not make them yourself?

1. The work starts from the center. You need to make 12 air loops. Then a ring is formed from them. The first and last loops must be connected.
2. The first few are knitted side by side in pillars. There is no need to make yarn overs.
3. In each next row, 3 air loops are added. Thanks to this, there will be more yarn, and the product will turn out smooth and neat.
4. Next, double crochets alternate with single crochets. Since the napkin should be rectangular, step 4 must be repeated 3-4 times. Don't forget about adding air loops!
5. After decreasing the columns in the next rows, the ends of the rows should be connected by a half-column. Knit several rows like this.
6. The columns are decreasing. You should end up with a rectangle.

Rectangular napkins often decorate tables in restaurants and family dinners.

The thread should be secured on the wrong side.

Crochet round lace doily

The round napkin looks very presentable. Such products are the most elegant, because they are small and delicate.

The work consists of the following stages:

1. The first row should be formed from air loops and pillars. There is no need to make yarn overs in columns.
2. The second row is knitted only with columns.
3. The third row is knitted similarly. Yarns are not made in pillars.
4. The beginning and end of the row are connected. There are 16 pillars knitted in a row. In the next row, the number of columns must be increased by adding air loops.
5. Double crochets alternate with double crochets. The following rows are knitted similarly.
6. The last row is knitted with single crochets.

The round napkin looks very presentable

Use a knitting needle to secure the end of the thread. It should be secured on the wrong side of the work.

How to crochet a tablecloth?

A tablecloth can be knitted in different ways.

Here is one of them:

1. First you need to connect the motif to the center of the product. Getting started is the same as when working with a round napkin. 12 chain stitches are cast on. Next, the posts are knitted with and without crochets, alternating. This is how the product turns out to be openwork.
2. The inner circle stripe should consist of 18 motifs. The outer stripe is made of 36 motifs. In each row you need to add an equal number of air loops. If you neglect this rule, the work will be asymmetrical and sloppy.
3. To make the product less dense, you need to make it with holes. To do this, single crochets must be alternated with double crochets. But there shouldn’t be too many holes!
4. As you add chain stitches, the amount of yarn will increase. The work should be completed when the tablecloth reaches the desired size.
5. At the last stage, the remainder of the thread must be secured on the wrong side.

The tablecloth can be knitted in different ways

Tip: In order not to make a mistake with the size of the tablecloth, it is recommended to apply it to the table as you complete the work.

• The easiest way to attach yarn to a hook is using the slip knot method.
• Beginners are recommended to use a thread that does not exceed size 10.
• The optimal size of a crochet hook is 2 mm.
• Do not tear off the thread with your hands; it is better to use scissors. It is worth cutting at least 8 cm, since the thread must be well secured, and if it is shorter, it will be difficult to do this.
• To decrease the double crochet, yarn should be draped over the hook and then inserted into the loop. Similarly, the thread can be threaded through 2 or more loops.

A very beautiful crochet napkin in 10 minutes (video)

Beautiful openwork napkins will never go out of style! Both housewives and career women can create these products, the main thing is to knit with love, and knitting lessons will help you with this!

Currently, it has become very fashionable to decorate the interior of a home with various hand-made products. This is not only stylish, but also significantly develops a person’s horizons.

The most common types of napkins and tablecloths found in home interiors are knitted napkins and tablecloths. You can, of course, disagree, saying that all this can be easily purchased in a store or supermarket. But the products self made They are quite rare, and their price is very high. In addition, handicrafts calm you down, relieve stress, help pass the time and develop your imagination. An important fact is that the creator puts a piece of his soul into each of his products.

Some facts

In the last century, crocheting was widespread, because there was not a wide choice of fabrics; many things were created using this wonderful technique. Since even a child can master the technique of crocheting, it is therefore with early age and the training began.

Having learned to cast on and make basic loops, we gradually moved on to more complex subjects. Crocheting napkins for beginners was a kind of learning test. The simplest patterns, a small amount of work - and with a successful result, you could begin to master the technique of knitting clothes. Based on simple patterns, it is very easy to create things such as ponchos, hats, shawls, skirts and other wardrobe items.

How to Read Patterns

At first glance at the diagrams, you can be intimidated by the complex symbols that make up the pattern of the future product. But in fact, reading the diagram is very simple. It is enough to study 1-2 sources, remember symbols and try to make the simplest patterns. You should try making loops using flat or horizontal knitting. After which you can safely start crocheting napkins. Schemes for beginners should be simple and understandable. The figure shows an example of the most common symbols and their names so that the diagrams do not seem like scary hieroglyphs.

In fact, as we see, there is nothing complicated. Crocheting napkins for beginners will turn into pure pleasure if you just carefully examine the pattern and decipher its symbols.

Selection of materials

Crocheting napkins for beginners should start with the right choice yarn. For the first trial lessons, you should choose thicker threads that are not so easy to get tangled in. For this purpose, it is worth taking acrylic yarn or wool blend. In this case, all the loops will be clearly visible, and the pattern will be clearly drawn.

Crocheting for beginners also depends on the choice of tool size. The napkins will have big holes if you choose a hook very big size. At the same time, it will be impossible to knit thick yarn with a small hook. Regardless of the type of yarn, the size of the tool must match it and not cause discomfort during work.

After the first results on dense yarn have been successful, you can begin openwork knitting. To do this, you need to choose a hook size 0.5 or 1, and threads - cotton, bobbin, No. 10. This material produces a thin, airy product.

Knitting Basics

In order not to lose interest in the process and turn it into a hobby, crocheting napkins for beginners should be based on the simplest patterns. These will be completely simple patterns, but with their help you will certainly develop the ability to read patterns and knitting techniques.

The first products can be used as coasters for hot items, such as cups or plates. In addition, if you master crochet for beginners, doilies rectangular shape knitted using the circular technique can be sewn. The result will be an excellent knitted blanket or bedspread.

The first loops obtained during the work process should not be very tight or loose. The density of the product and the accuracy of the work will depend on the tightening force of the thread.

It is also worth noting that in the process of creating a napkin it is necessary to carefully study the pattern - missed loops may cause the pattern to be distorted. In simple patterns, the pattern is often repeated from row to row, increasing in some places due to yarn overs and air loops.

Step-by-step crocheting napkin tutorial for beginners

Specialized magazines often contain master classes on crochet. Let's look at how to crochet a small napkin for beginners.

Let's consider the proposed pattern in order to understand the principle of knitting.

Step 1. First, create a ring of 5 air loops. Next, we cast on one air loop for lifting and knit 8 single crochets. We close the row.

Step 2. Next, we cast on three lifting chain stitches and knit a double crochet. We continue to knit 2 chain stitches, 2 double crochets in one loop of the previous row. The number of loops increases to 34. Close the row.

Step 3. Again the lifting loops, we begin to knit a lush double crochet and air loops. We close the row.

Step 4. Knitting the last row, we form a square. Alternating double crochets and chain stitches, we get square motif, which can be part of a larger blanket. This is the product we have at the end of knitting.

If in the circuit we replace lush columns with a yarn over regular loops with one or two yarn overs, we get a less embossed fabric.

Simple circuits

Crocheting napkins for beginners should start with the simplest patterns. This makes it easier to learn how to count stitches, understand the symbols and, of course, develop your own knitting technique and pace. We offer several simple patterns that will help you create both absolutely small and medium-sized napkins.

Below is a diagram (symbols can be seen above) of such a product. Such patterns can be found in special knitting magazines. This is the simplest napkin option for beginner knitters.

Often in handicraft magazines there are diagrams with examples, like this one.

Such schemes are good because they show the end result, based on which you can compare your creations.

Where to learn to knit?

If crocheting napkins by yourself, patterns for beginners are difficult for you, and the descriptions seem incomprehensible, use the video tutorials, which clearly show how to cast on loops and perform basic motifs.

You can also look for special courses that teach the basics of crochet. Almost every city periodically organizes exhibitions or master classes, where you can find a worthy teacher. At these events, experienced craftsmen share their secrets with beginners. Topics that affect crocheting napkins for beginners are often raised there. Discussing and commenting on your work will help you see your mistakes and mistakes.

Conclusion

I would like to hope that this article helped in learning this wonderful type of needlework, and with the help of a little advice you will certainly get a beautiful, openwork tablecloth made with love and warmth. Let it be small, the first, but created with your own hands. I would like to believe that in the future your home will be decorated with a real knitted work of art.

The once forgotten art of knitting interior napkins is being revived again today. This is an irreplaceable thing that will not only serve as a stand for cutlery, but also decorate the interior of the house. Even if you have never crocheted, a napkin is the item with which you can start learning this needlework.

How to crochet a napkin for beginners, in detail from scratch

If this is your first crochet napkin, then start with a simple, uncomplicated option. To avoid getting tangled in the lace, tie a napkin from acrylic thread. The hook is selected according to the thickness of the yarn.

• If this is your first napkin, choose wool blend or acrylic threads so that they do not get tangled.
• Focusing on the interior and design where you plan to put the napkin, choose the color of your threads.
• the hook should be the same thickness as the threads, for thin knitting, take a hook that will be thinner than your thread, to get a looser knitting, choose a thicker hook.

Needlewomen who have experience choose the thinnest threads for knitting napkins. In this case, the napkin turns out to be so soft. that looks like a cobweb.

Conventions that appear in the diagrams:

The first thing to start knitting a napkin with is a set of loops - 12. Round napkins start knitting from the center.

We look at the diagram and tie the ring.

We close the circle by connecting the air and the last loop.

Second row - three ch, 4 sts. from 2 n. and into the pillar. previous row.

We repeat

Do not connect the last stitch of the row with the first; by connecting them, you will break the pattern.

The third row is alternating four chain stitches with six stitches plus two yarn overs. The middle four are - the hook should go into the base of the post from the row that is knitted. the last one goes under the chain of a row already knitted, from air loops.

The third row is the same as the second.

The fourth row is an alternation with five chain loops, eight stitches, plus two double crochets.

Fifth row - alternating nine chain stitches with ten stitches plus two double crochets.

Sixth row - alternating eleven chain stitches with four stitches, plus two double crochets, eleven chain stitches, two stitches of the previous row, skip, four stitches plus two double crochets. End of the row - connect the last loop to the first.

Seventh row - five chain stitches, fifteen stitches plus two double stitches. Insert the hook into the stitch. air of the previous series. Next are five air loops, a column under the air loops of the previous row.

The row ends - we knit six chain stitches, connect the first and last.-

Row eight - six chain stitches, then a post. and two nak, pico small of four air loops.

A stitch plus two double crochets in the third stitch of the previous row, then knit as in the diagram. It should turn out, with picot (between the columns), eight columns.

The work is finished, the thread needs to be cut and secured on the wrong side.

Description of crocheting napkins for beginners, a simple napkin step by step

If you are a beginner needlewoman, this napkin option will suit you perfectly. The diameter of such a napkin is fifty centimeters. Take cotton yarn - eighty grams, use a hook with number - 1.75 or 2.

Start by knitting air loops - 8 pieces, then connect the resulting chain with a post (connecting one) into a ring. Replace the first pillar. (with yarn over) for three stitches. air. We knit fifteen stitches in a circle (double crochet), finishing with one connecting stitch in the initial third loop (chain).

Continuation of knitting - look at the diagram. We start each next row in the circle with air loops, according to the number in the diagram, ending with a connecting column. We knit the sixth and eighth rows in a circle, behind the previous row. We squeeze the petals in the fifth and seventh rows out. For the forty-first row - finish each fragment separately, attach the thread, each time, again at the arrow. We knit from the forty-second row to the forty-fifth, in reverse and straight rows.

The diagram is part of the napkin; the row in the circle must be completed according to the drawing. The numbers indicate rows in a circle.

Video on how to knit a napkin for beginners

Beautiful crochet napkins for beginners, diagrams with detailed descriptions step by step

The napkin will perfectly decorate a vase or glasses; its diameter is twelve and a half centimeters. We will knit a daffodil from yarn, three hundred and ninety-five meters in one hundred grams. You will need hook number two.

We cast on eight loops (air loops) and connect them into a circle (with a connecting loop).

In the first row - three loops (chain), tie fifteen double crochets in a circle, with a (connecting) loop in the first of three chain loops.

In the second row there are five loops (air loops), pattern repeat * one post. (with nak.), in column. with nak. row of the previous one, two air loops * loop (connecting) into the third loop (air). Repeat the third row.

In the fourth row - we knit one loop (air), in a common top. pillar. one (with cap.) *in the arch of the previous row, five table. (with nak.), one pillar. (without nak.) in general. top * loop (connecting) in the column. (without nak.).

In the fifth row - three pets. (air) * three pet. (air), one column. (without nak.) in the third column. (dc) of the previous row), three loops (chain), one stitch (double crochet) in the stitch (single crochet) of the previous row * loop (connecting) in the third (chain).

In the sixth row there are two loops (connecting), in the fourth and fifth stitches. (air) * one pillar. (without nak.), in the arch - five petals. (air), pet. (connection in column (without voltage).

In the seventh row - four loops (connecting) * one column (single crochet), in an arch, five loops (air) * connect the loops into a column. (without ac.)

In the eighth row - four loops (connecting) * one stitch (single crochet) in the arch, three loops (chain), two stitches (double crochet) in the arch, picot, two stitches (double crochet), three loops (chain) * loop (connecting) in a column (single crochet).

READY!

Napkin, in the picture below, it turns out very beautiful. It is assembled from two motives. We will need a pink and white iris thread. Hook number one.

Work begins with knitting a white piece. To do this, cast on a chain of fourteen stitches. air and combine the half st. into a ring. First row: three air.pet. and twenty-seven pillar. with one ac. into the ring.

Second row: four air loops * column. with one yarn over. one chain stitch*, thirteen stitches with one chain stitch, knitted into each stitch of the first row. At the end of the river dial three air.pet. and pull out one long one so that the work does not unravel. See photo.

Then cast on a chain of fourteen chain stitches. with a pink thread and insert it into a white ring, then close the chain into a half-column ring. We perform the first two rows according to the method described above. Then connect. last pet. pink and first pet. second r. white ring half-column.

Third: above each air.pet. last p. make a pillar with a white ring. with one air loop, and between them one air loop, a picot of three air loops. in one air.pet. At the end of the river Pull out one long stitch. and put off work.

Return to the white ring. Pair it with pink. Knit the third r. same as described above for the pink ring. Extreme pet. connect the white one with the outer pet. rose, and the pink one with the white one. Make twenty-five motifs in this way and sew them together with a needle and thread.

Crochet napkins are simple and beautiful for beginners, patterns with detailed descriptions

napkin with Japanese motifs

Yarn color - white, 100% cotton (mercerized), 100 grams/565 meters - in one skein, hook - number 1.

Scheme - for convenience, odd and even rows are marked in different colors. There are twelve rows in total in the napkin, the size is 33 centimeters

Row three: ten pet. (air) column with four hinges, nine loops (air), post. with five yarn overs.. in the fourth st. (air) beginning of the row (photo 1). Make two pillars. with three nak., in the center of the previous column.. with five nak. (photos 2;3).

Nine pet. (air), two columns.. with four yarn overs, tied together in the fourth stitch. (air). the beginning of the river (photo 1). We knit seven stitches. (air) * seven column. with four arms tied together (photo 2;3)

Seven pet. (air) one column.. with six pillars. and one pillar. with four nak. in the third yarn over of the previous stitch, tied together.

Nine pet. (air, one stitch.. with five stitches, knitted into a third stitch.. stitch.. with six stitches. (photo 1). We knit two stitches.. with three stitches, knitted in the center of the previous stitch.. with five stitches. (photo 2 ;3).

Nine pet. (air), two pillars. with four nak, knitted together, in the third nak. the same pillar. from 6 nak. (photo 1). Then we make seven pets (air)* - repeat from * to * to the end of the row; then - seven pets. (air) and close the river. deaf pet at ten peta (air) the river began. (photo 2).

Row four: Go to the top of the flower in half-columns. Five stitches (air) * 2 stitches.. with 3 yarn overs tied together, eight stitches. (air), one pillar. with four yarn overs, of which knit only three and make two more columns at the same point... with three yarn overs. and, knit them together, and then finish the last one. nak. post with four crochets*.

Next we knit: *six stitches. (air) - “Eiffel Tower” * - repeat three times from * to *. Next - seven pets. (air), “contracting tower” - seven pet. (air) “Eiffel Tower” * six pet. (air) - “Eiffel Tower* - repeat from* to* four more times. And then, again seven pet. (air), “contracting” tower and thus to the end of the river. Close r. pet. (deaf).

Row eight: seven pet. (air), pillar without nac. around the next arc, seven pet. (air), one pillar. without pressure around the arc (photo 1). Next - seven pets. (air) one pillar. with five caps.. to the “Eiffel Tower” (photo 2;3).

one tie with three straps. in the center of the column.. with five nak. - then knit them together

six pet. (air) one pillar.. with five ends.. pillar in the center. with five nak. two columns.. with three ends.. (in the center of the last column.). with five nak., six loops (air) (photo 1). Two pillars. with three nak, tied together, (in the center of the first column). with five nak. (photo 2)

Repeat until the end of the river. all the manipulations in the description of this r. Close r. pet. (deaf), go to the pillar. (without nak.). to the top of the arc.

We knit three “Eiffel towers” ​​together and knit a nac. the last one, the primary column, with four pillars. (photo 1;2). Four pets again. (air). and we tie the flower with “Eiffel towers” ​​patterns. We are finishing the river. pet. (deaf) (photo 3).

Row twelve: We tie the r. pillar. with nak. Let's start the river. like this: four pillars, without top. around the arc; four pillars without nac. around the next one. arcs, picot of four pet. (air) four pet. (air). + deaf pet.. in the first pet. air of this pico), four pillar. without nak., around this arc. We tie all the arcs in the same way, excluding the junction of the flowers, here we knit four columns on each arc... without thread. and do not make pico (photo 1). We moisten, straighten, iron with steam (photo 2).

snowflake shaped napkin

sc - single crochet
VP - air loop
ss - connecting post
n - yarn over

• Connect the thread with a ring, tie one loop (air)
• row one: Knit 8 sc in a circle, tighten the ring, tie a ss, insert the hook into the 1st sc (of this row).
• row two: 3 ch for lifting plus 2 ch, as in the diagram. Next, in the next loop - 1 s. 1 n, then 2 ch, in the next loop 1 s. 1 n., again - 2 ch.
• row three: 1 ss, 2 ch, 3 s. 1 n. with a common top, 5 ch, in the next arch 4 s. 1 n. with a common top, 5 ch, - so until the end of the row. Close the ss, insert the hook into the common vertex.
• row four: 1 ch (raising), 1 sc (in the same loop), picot from 3 ch, 1 sc in the same loop, picot from 5 ch, 1 sc in the same loop, picot from 3 ch, 1 sc in the same loop , 3 ch into the common top. So the whole row.
• the work is finished - cut the thread.

Crochet oval napkin for beginners, diagram with description

1. We knit a chain - eight air. pet., close the connection. pillar. into the ring.
2. We continue to knit in circles, as in the diagram.
3. Knit four rosettes, connect in the last row.
4. Attach the thread next to the arrow.
5. Tie around the sockets, as in the diagram, in rows in a circle.

Crochet square napkin for beginners, step by step diagram

From air.pet. form a ring. We perform 6 pets. from the ring. Connect the first st. with the last one we make 1 post. without nac. It turns out to be a ring.
The first row is a pillar. (single crochet) After three stitches. (air). - fifteen pillars. (with nak.) - in the center. We connect the first and last pillar.
Second r. - three pet. (air), next two - in the pet., from the chain.
We skip the pillar with the nak. from a series of previous ones. Do three pillars like this. Add 2 air.pet. Repeat until no. will not end. The ends of the river connect with a half-column, without nak.

Crochet openwork napkin for beginners, detailed diagram with description

An openwork napkin, 35 centimeters in diameter, knitted from cotton yarn, crocheted 1.5.

We knit a chain - eight stitches. (air). Connect it with one pillar. in a circle Change the first pillar. with two nak. for four pet. (air) one pillar. with two yarn overs, knit in a circle * five chain stitches, knitted together with two stitches. with nak, Repeat ten times, finish five pets. (air), one connecting pole. - to the first pillar. with two radial yarn overs.

Continue knitting according to the pattern, each radial r. start with air. pet., the total number of which is in the diagram, and finish the connection. Art. Make connections as needed. Art. to the subsequent radial r. The diagram shows only part of the napkin, the radial r. finish according to the drawing

Tie a chain with ten chain loops and close it. Next time knit three air. loops, then 23 stitches, knit with double crochet, finish with a connecting loop. Then we look at the diagram and knit according to it. The reports are repeated in each circle - 12 from the first to the twenty-third. twenty four rubles - ninety-six rapports. ; twenty-five rows - one hundred and ninety-two reports; we knit to the end - twenty-four repeats.

Crochet fillet napkin for beginners, diagram with description

The fillet knitting technique involves knitting a mesh with empty and filled cells. Scheme - one pillar. with double yarn over + two air. loops, and the filled one is three double crochets. In order for the napkin to be dense, it is necessary to tighten the loops tightly. Take the hook 1 number less.

Lace, cutwork and macrame are back in fashion. All these openwork loops and holes, which create extraordinary patterns, decorate festive tables, flower arrangements and just morning breakfast service. To tie beautiful napkins crochet according to the pattern Anyone can do it with their own hands. The main thing is to put in a little effort and patience. After all, it's worth it!

A simple napkin in the shape of a flower that will delight you all year round. Diagram, step-by-step instructions and master class

This is interesting: How to make weaving and flowers from beads: master classes and patterns for beginners + 125 PHOTOS

An openwork flower in the form of a napkin can be an excellent spiritual gift. Anyone can knit such a home decoration simply by following the step-by-step instructions. The napkin knitting pattern is quite simple and consists of light elements. Having done this once, you can easily cope with the most complex schemes.

For the napkin you need to take:

• cotton yarn (consumption 50g/270m) 25 g;
• hook number 2.

Let's get started

1 Cast on 10 chain stitches to get started.

2 Close the ring using a connecting loop.

3 For the first row of napkins you need make 1 air loop. Then knit 17 single crochets into a ring of loops and finish the row with a connecting loop.

4 For the second row you need cast on 4 chain stitches. These loops will replace the double crochet stitch. Then knit 5 chain stitches, double crochet into the 3rd single crochet of the first row. Then again 5 chain stitches and a double crochet stitch. Repeat 3 more times. We attach the last air loops to the 4th lifting loop using a connecting loop.

5 We proceed to knitting the 3rd row. First you need to knit 4 lifting loops, then 5 double crochets into an arch of air loops of the second row. Then we knit 5 chain stitches and 6 double crochets into the arch of the previous row. Again 5 chain stitches and 6 double crochets, and so on until the end of the row. We finish with 5 air loops, which we attach to the 4th lifting loop.

6 We rise to the 4th row using 5 air loops. Then you need to knit 5 stitches with 2 double crochets with one vertex at the base of the posts of the previous row. To do this, you need to knit each stitch until the end (leave 2 loops on the hook) and move on to the next stitch. Afterwards all the loops are knitted together. Then 7 air loops and 1 double crochet stitch in the arch from the 3rd row. Again 7 chain stitches and 6 double crochets with a single top. Repeat until the end of the row, ending the row with a connecting loop.

7 We knit the 5th row. To do this, you should make 4 lifting air loops, then another 5 air loops (this will be an arch). We make a double crochet stitch into the connecting loop of the previous row. Again 5 air loops. Then 3 single crochets in the 5th, 6th and 7th loops of the arch of the 4th row. Another 1 single crochet in the single crochet of the 4th row and again 3 single crochets in the arch. Then 5 chain stitches, a double crochet stitch at the top of the stitches from the 4th row, 5 stitches, a double crochet stitch at the top of the stitches and 5 chain stitches. Then we knit 7 single crochets, as at the beginning of the row. Next we continue the series by analogy. We finish the row with 5 air loops, which we close in the 4th lifting loop.

8 Let's move on to the 6th row. We make 4 chain stitches, then 3 stitches with 2 double crochets in the arch, 5 chain stitches (this will be an arch) and 4 stitches with 2 double crochets in the same arch as the previous stitches. We knit 6 chain stitches and 5 single crochets into 2-6 single crochets of the previous row. Then again 6 chain stitches and 4 tables with 2 yarn overs in the arch of the 5th row. We knit 5 chain stitches and again 4 double crochets into the arch. After 6 chain stitches and 5 single crochets, we continue in the same way until the end of the row. We close the row with a connecting loop.

9 We start row number 7 with 4 lifting loops. This is followed by 3 stitches with 2 double crochets in the base of the previous stitches and 4 stitches with 2 double crochets in the arch of the previous row. We knit 5 chain stitches for the arch and again 4 double crochets into the arch from the previous row. Then 4 double crochets at the base of the stitches of the 6th row. Next, 7 air loops and 3 single crochets in 2-4 loops-bases of single crochets of the previous row. And again 7 chain stitches, 4 chain stitches with 2 double crochets in the base from the 6th row, 4 similar stitches in the arch, 5 chain stitches and then in a circle. We close the row with a connecting loop.

10 Let's move on to knitting the 8th row. To do this, perform 4 lifting loops. Then we knit 7 double crochets at the top of the columns from the previous row and 4 double crochets into an arch of 5 loops. Then we make an arch of 5 chain stitches and again proceed to knitting double crochets: 4 in the arch and 8 in the top of the stitches from the 7th row. We knit 8 chain stitches, 1 single crochet into the 2nd single crochet of the previous row, 8 chain stitches. We move on to knitting a flower petal again: 8 stitches with 2 double crochets at the top of the stitches, an arch of 5 air loops and then continue to knit a row by analogy. We finish the 8th row, like all the previous ones, with a connecting loop.

11 Row number 9 begins by analogy with all the others with 4 lifting loops. Then it is knitted openwork edge flower. To do this, we knit 3 chain stitches, 1 stitch with 2 double crochets into the 3rd stitch with 2 double crochets of the previous row (we skip the 1st top of the base). Repeat 3 more times. So, together with the lifting loops, which at the beginning of the row replace 1 double crochet stitch, you should get 4 arches. Then we knit 3 chain stitches, 1 stitch with 2 double crochets in the arch of the previous row, 3 chain stitches with a new stitch with 2 double crochets in the same arch. Repeat *3 air loops and a double crochet stitch through one top* 5 times. Then we knit 1 stitch with 2 double crochets into the first vertex of the stitch of the 9th row and then knit a petal by analogy. We finish with a connecting loop.

12 We knit the last 10th row. It gives the flower even more delicacy and relief. We make 1 lifting loop and knit into an arch *1 single crochet, 1 double crochet, 1 double crochet, 1 single crochet, 1 single crochet*. Repeat from * to * in each flower arch. Close the row with a loop and break the thread. Important - the thread does not need to be cut to the edge. You should leave a small tail, which is then hidden in the knitting loops. The openwork napkin in the shape of a flower is ready.

After completing the knitting, the napkin, like any product, needs to be wash at a temperature not exceeding 30 degrees. To dry, lay the product on a dry towel. It is not recommended to hang the napkin on clothespins to dry. Since this may lead to deformation of the product. Then they iron and decorate the house with a stylish new napkin. If desired, the product can be starch. The main thing is that you like it!

Delicate snowflake made of threads, step-by-step instructions and diagram

Read also: Crochet for summer 2018: fashion ideas, trends, styles + 140 PHOTOS

Napkin in the form snowflakes or maybe it's chrysanthemum. You decide. But it is very beautiful and will look stylish on the dining table. A composition of 3 such napkins can decorate a festive dinner. Be original - the napkin does not always have to be white. Can be linked yellow, red and even blue napkin.

2 We knit the 1st row. We make 4 lifting loops and 1 double crochet stitch. Then we knit *4 chain stitches and double crochets*. Repeat from * to * 4 more times. We end the row with 4 air loops and a connecting post.

3 Let's move on to the 2nd row. We knit 4 lifting loops. Then 3 double crochets at the top of the previous row. After *3 double crochets to one top of the table from the previous row, 1 double crochet, again 3 double crochets to the top of the table from the 1st row*. Repeat from * to * 4 times. Then we perform 3 double crochets and complete the row with a connecting loop.

4 We start row number 3 with 4 lifting loops. Then *4 air loops. Then we knit 4 stitches with 2 double crochets with one vertex at the base of the posts from the previous row. Again 4 chain stitches, 4 double crochets with a common top, 4 chain loops and a double crochet stitch in the next base loop from the 2nd row*. We continue from * to * 5 more times. We finish the row with 4 air loops and a connecting loop. The result is a hexagon.

5 We knit rows 4-12 according to the pattern according to the symbols. As you knit, the napkin will take on a hexagonal shape. Starting from the 7th row, the future edges of the snowflake will appear.

Upon completion of the last row, it is necessary to fasten the thread and hide the edge in the base of the knitting. Wash the snowflake. During washing, all the loops are straightened, and the product itself is cleaned. Dry in a horizontal position, preferably on a towel. Iron with steam. And you can decorate your house! It's beautiful!

Today I want to talk in detail about the little blue napkin. After all, knitting napkins is one of the first things you can start learning to crochet with. The pattern of many napkins is quite simple and almost all napkins are knitted in the round. Before I start knitting a napkin, I choose a simple pattern with simple pattern. Regardless of the chosen pattern, napkins start with six or eight chain stitches. will allow you to understand knitting patterns and quickly learn such types of loops as air loops, half-columns and columns with one two or more crochets.

Small crochet napkin for beginners details:

To make this napkin I chose thick woolen threads.

First I performed six air loops. After completing six air loops, I close them into a chain using a connecting post.

For the first row, I perform the following steps: first, I cast on three air loops as a rise and knit eleven stitches and cut them using one air loop.

I knit the second row in this way: I make a lift using three chain stitches and knit a stitch into the chain stitch of the previous row.

Then I knit one chain stitch and knit two single crochet stitches into the previous chain stitch. Then I perform one chain stitch and knit two more double crochet stitches into the previous chain stitch of the previous row. I continue to do this until the end of the row. I close the row using a connecting post.

I perform the third row in this way: first I make one connecting column and lift it using three air loops.

I continue to knit the third row in this way: after lifting into the first air loop of the previous row. At the end of completing two stitches, I knit one chain stitch and in the next chain stitch I knit three stitches with one crochet. At the end of knitting the row, I close it using a connecting post.

I perform the fourth row in the same way as the third row, but the only difference is that I knit four single crochet stitches.

I close the row similarly to the previous row.

I perform the fifth row in this way: I make the transition to the double crochet of the previous row and knit five chain stitches.

Then I knit a single crochet into the chain stitch of the previous row.

In the last arch I knit two air loops and knit a double crochet. In the last sixth row I perform eight single crochet stitches. Next, I knit a single crochet into the arch.

In the next arch I knit eight single crochet stitches. I continue knitting like this until the end of the row. I finish the row with the help of a connecting post.