IN modern conditions DIY brush making is usually done using bristles and animal hair. You can make such brushes with your own hands and get a high-quality tool for painting or painting. Depending on the area of ​​use, brushes can be made round or flat. In addition, the pile can be shortened or elongated.

Making a brush with your own hands is not difficult

The most common and high-quality brushes are made from the tail hair of the following animals:

• badger;
• column;
• proteins;
• gerbils.

Considering the high cost of tools made from animal hair, which were listed above, in homemade brushes this material can be replaced with wool and hair of other animals. In particular, recently instruments made from mink, arctic fox and fox wool have become increasingly common. In addition, waste from activities can be used as material fur factories. Also, the pile can be made from the wool of camels, sheep or long-haired dogs, as well as from human hair.

Manufacturing technology

The first step in manufacturing is the preparation of bristles or animal hair. In addition, a stand for the hands and material for the handle must be prepared. However, the first thing to start with is choosing the material for the bristle tuft.

Material selection

When choosing a material, you need to focus on what work you plan to use the brush for. So, some materials are suitable for painting with watercolors or oils, while others are suitable for fine painting work. At the same time, there are areas of use that require the use of a certain material. For example, when painting with ink, most artists prefer to use products made from camel wool.

Trimming wool for future brush bristles

Let's look at the main characteristics of the most common homemade brushes, depending on the material used:

1. Gerbil brushes, as a rule, are made flat with a long or short hair surface. They are distinguished by soft and elastic hair. Therefore, such tools are mainly used for fine painting or painting with oil paints or watercolors. In addition, brushes with gerbil bristles can be used to glaze the varnish coating.
2. Badger products have a round or flat shape. They are somewhat tougher than the previous version, and therefore they are mainly used for working with oil paints.
3. Brushes with kolinsky bristles can be flat or round. They have high elasticity and resilience. They are mainly used for fine work, as well as for wet glazing.
4. Squirrel tassels can only be round. They are exceptionally soft and elastic, so they are mainly used for painting on porcelain or paper.

Hair preparation

It is advisable to start harvesting in early autumn, when animals moult. Individual unsuitable hairs are removed from the collected bundle and trimmed. Next, the trimmed part is placed in a glass for leveling. The resulting hair tuft should be combed out using a comb with sharp teeth.

Carefully combed pile must be bandaged and degreased in clean gasoline. To do this, the bundle is stored in a closed jar for several days, after which it is boiled in a tanning solution to make the hairs non-hygroscopic.

Carefully combed pile is bandaged and degreased

The next stage is hardening, the conditions of which depend on the type of hair. Typically, the hair is kept at 150 degrees for about an hour. For hardening, the bundle is placed on a metal mesh or suspended so that the hairs are well warmed up with air at the required temperature.

Knitting brushes

Pile that has been hardened is suitable for knitting brushes. To do this, a certain number of hairs are taken and lowered into a tin or plastic mold with a conical bottom. This form must be prepared in advance. After you put it in the mold required amount hairs, you can make a blank for the brush by tapping on this form. Next, the bundle of hair is removed and tied, after which the non-working surface is covered with varnish. It is inserted into a metal capsule or clip.

The capsule can be made either from thin metal strips, connecting their edges with an overlap and soldering. In addition, this can also be made seamlessly, which is considered a more acceptable option.

It is recommended to make the capsule from brass or tinplate, as these materials are durable and resistant to corrosion. Its size will depend on the required brush number. Also at this stage, do not forget about such an important element as a brush stand.

A brush stand is an equally important element.

Making a pen

After you have managed to make the pile, you should start making the handle. It is best carved from the following types of wood:

• pine;
• alder;
• birch.

After turning, the handle is coated with colorless varnish or painted with a single-color paint. Next, the beam inserted into the capsule is filled with synthetic glue or other waterproof compound from the wide end. This must be done so that the glue reaches the end of the pile, which is located in the capsule.

After everything has dried, the capsule with a bunch of bristles should be connected to a wooden handle. For strength, it is recommended to additionally crimp the capsule with a wooden handle. The finished handle should be varnished.

Selecting pile length

You need to choose the length of the bristles released from the capsule. The length of the released hair should depend on its elasticity. This is of fundamental importance, because if the bristles are too long, the brush will look disheveled. Otherwise, insufficiently released pile will not pick up a sufficient amount of paint.

After you have decided on the length, the finished brush must be moistened with water and combed until the bristles are as even as possible.

Conclusion

Thus, making a brush with your own hands is a completely affordable procedure. It consists of several stages, one of which is the selection of material. Hair and stubble are selected according to in this case taking into account the purpose of the brush and financial capabilities.

Let’s try to figure it out together with you how to make a paint brush in five minutes.

Everything is in stores now! Buying any brush quite cheaply is not a problem, but imagine this situation. You need to paint something. Literally two brush strokes. After such short-term use, you will have to throw away the brush. It’s a shame, but there’s nothing you can do, it’s not easy to wash it by hand.

And in this situation, this article will come to your rescue.

How to make a brush for painting with your own hands, very simply and cheaply, which does not need to be thrown away and does not need to be washed, with detailed photographs will be described in it.

What can you make a brush from?

This does not require a lot of time and materials. An old dried brush or any other pen that is comfortable to hold in your hand while painting and a few more details will be enough.

We disassemble the old brush so that the handle remains intact, and throw away the rest.

Next, select an ordinary office clip of the width you need for the brush, and adjust the width of the handle to the width of the clip. It’s better not to cut the handle with a knife, but to saw it off, it will be neater, and there’s no risk that the wood will break off in the wrong place.

To secure the clamp to the handle, you need to select two small and not thick screws. Depending on the diameter of the screws, you need to take two drills. The larger one is for drilling the clamp, and the smaller one is for drilling a hole for the screw in the handle (so that it does not split when tightening the screws).

We drill holes.

Screw the clamp to the handle.

Cutting out the foam rubber the right size and insert it into the clamp.

The brush is ready.

The brush for painting is made by yourself, you can use it indefinitely and not worry that the paint will dry out and you will have to throw away the brush. After painting, you simply throw away the used foam rubber, and just wipe the handle lightly to remove traces of paint. You don’t even have to throw away the foam rubber, but leave the brush as it is.

In order for the brush to be ready for further use, simply replace the dried foam rubber with a piece of new one and the brush is ready for use again. You can take any foam rubber, such as you have.

If you can’t find foam rubber, you can use a piece old fabric, rolled up in several layers, a piece of felt or something similar.

As you can see, there are no hopeless situations.

Yana Karimova is finding out whether it is possible to save money by replacing makeup brushes with brushes from an artist store.
Among people who are interested in cosmetics, there is a widespread belief that brushes should be more expensive than the contents of a cosmetic bag. Of course, there is a rational grain in this, but the crisis spares no one, the ruble is falling again, and if guides on mass-market cosmetics were not written only by the lazy (we are among them -)), then budget brushes are not so easy to find.

I read several times in interviews and blogs of makeup artists that for some makeup brushes there are analogues among artistic ones, and they, by the way, cost an order of magnitude cheaper. After spending forty minutes at the brush stand carefully examining and feeling the assortment, I left the artist store with five brushes - and the strong feeling that I had discovered a new source of savings and a type of shopaholism at the same time.

Round brush No. 1 (synthetic), Roubloff

The first thought when looking at this brush: “Yes, this is an eyeliner brush!” But in comparison with ordinary thin eyeliner brushes, you come to disappointing conclusions. The Roubloff brush is thinner and its bristles are several millimeters longer, which is why it is inelastic and bends when pressed. With such a lack of control, it is completely impossible to draw arrows. It's a pity, the price is very nice-)) However, I managed to adapt it for eyebrows. You can draw very fine hairs, the effect is the same as when using a felt-tip pen for eyebrows.

Price – 77 rubles.

Angled brush No. 6 (synthetic), Roubloff

The bristles of this brush are narrower and shorter than the angled brushes I had. Because of this, it is a little more difficult to draw the same arrows with it. But they can be made very thin-) And, without reservation, it is very good for eyebrows, and with its help you can apply both shadows and cream products. If I suddenly find myself without a single eyebrow brush, I know which one I’ll buy first-) The price here is a nice bonus. Very pleasant, to be honest.

Price – 157 rubles.

Oval brush No. 7 (synthetic), Roubloff

If I chose the previous two brushes at my own risk, this one was easier - synthetic oval brushes are exactly what makeup artists use to apply concealer. Well, what can I say, these makeup artists are not fools-)) The brush is great for spot camouflage when you need to apply a densely pigmented concealer (like my favorite Laura Mercier Secret Camouflage).

In the process of using the brush, another use was found. It allows you to apply lipstick precisely and tightly. Just a few movements and your lips are painted. It is clear that this can be done with almost any lip brush - but not every lip brush costs 176 rubles -)) I’ll definitely buy a double.

Price – 176 rubles.

Round paintbrush No. 5 (squirrel)

At first glance, everything is clear with the brush. Soft, fluffy, squirrel - just right for shading shadows. In reality, it’s not so simple-)) The brush is so soft that it is completely impossible to shade relatively pigmented shadows. Which, however, does not make it completely useless-) With its help, you can apply a base light color to the entire eyelid or a highlighter shadow under the eyebrow.

Price – 142 rubles.

Round paintbrush No. 10 (squirrel)

The most expensive and largest brush of the five. I love that it is softer and gentler on the skin than most regular face brushes. I apply highlighter to it (everywhere you would normally apply highlighter) and sometimes powder my T-zone and under-eye area. When I took the swatches, I didn’t have a powder highlighter on hand - but, as it turned out, she applied cream highlighter very well -)

Price – 580 rubles.

As a result, out of five brushes, three have firmly settled in my cosmetic bag - and two of them are cheaper than two hundred rubles. It seems to me that this is a good savings -)

Guys, we put our soul into the site. Thank you for that
that you are discovering this beauty. Thanks for the inspiration and goosebumps.
Join us on Facebook And In contact with

All children love to draw. But sometimes things don’t turn out the way a child wants. Or maybe he doesn’t have enough familiar ways to express himself? Then you can inspire him to experiment with different techniques, among which there is sure to be a favorite. After this, your child will probably want to invent something new.

website I have collected the most interesting techniques for you.

Dot patterns

First we draw the simplest squiggle. Then using cotton swab and paints (gouache or acrylic) we make intricate patterns as the soul pleases. It is better to pre-mix the paints and dilute them slightly with water on the palette.

Frottage

A technique familiar and loved by many since childhood. We place an object with a slightly protruding relief under a sheet of paper and paint over it with pastel, chalk or an unsharpened pencil.

Foam prints

Having dipped a sponge in thick gouache, the child can draw landscapes, bouquets of flowers, lilac branches or animals.

Blotography

One option: drop paint onto a sheet and tilt it in different directions to create an image. Second: the child dips the brush into the paint, then places the blot on a sheet of paper and folds the sheet in half so that the blot is imprinted on the second half of the sheet. Then he unfolds the sheet and tries to understand who or what the drawing resembles.

Hand and foot prints

It's simple: you need to dip your foot or palm in the paint and make an imprint on paper. And then use your imagination and add a couple of details.

Paint patterns

For such an application you need to apply a thick layer of paint onto the paper. Then, using the opposite end of the brush, scratch patterns on the still wet paint - various lines and curls. When dry, cut out the desired shapes and paste them onto a thick sheet of paper.

Fingerprints

The name speaks for itself. You need to paint your finger with a thin layer and make an imprint. A couple of strokes with a felt-tip pen - and you're done!

Monotype

On level ground smooth surface(for example, glass) a design is applied with paint. Then a sheet of paper is applied, and the print is ready. To make it more blurry, the sheet of paper must first be wetted. Once everything is dry, you can add details and outlines if desired.

Scratch

The highlight of the work is that the drawing needs to be scratched. A sheet of cardboard is densely shaded with spots of multi-colored oil pastels. Then you need to mix black gouache with soap on a palette and paint over the entire sketch. When the paint is completely dry, use a toothpick to scratch the design.

Air colors

To make the paint, mix a tablespoon of self-raising flour, a few drops of food coloring and a tablespoon of salt. Add a little water to the consistency of thick sour cream and mix well. The paint can be placed in a pastry syringe or in a small bag. Tie tightly and cut the corner. Draw on paper or regular cardboard. Place the finished drawing in the microwave at maximum mode for 10-30 seconds.

Marbled paper

Paint a sheet of paper yellow acrylic paint. When it is completely dry, paint it again with diluted pink paint and immediately cover it with cling film. The film needs to be crumpled and gathered into folds, since they are the ones that will create the desired pattern. We wait until it dries completely and remove the film.

Painting with water

Using watercolors, draw a simple shape and fill it with water. Until it dries, we put colored blots on it so that they mix with each other and form smooth transitions like this.

Prints of vegetables and fruits

Vegetables or fruits need to be cut in half. Then you can cut out some kind of pattern on it or leave it as is. We dip it in paint and make impressions on paper. You can use an apple, potato, carrot or celery for prints.

Leaf prints

The principle is the same. We smear the leaves with paint and make prints on paper.

Drawings with salt

If you sprinkle salt on a watercolor painting that is still wet, it will soak into the paint and create a grainy effect when it dries.

Brush instead of a brush

To create an even complexion, apply a moisturizing BB cream. It will perfectly even out your skin tone, give your face a healthy tint, and also moisturize your face and protect it throughout the day. You can simply apply it with your hands, like a regular face cream.

STEP 2

The simplest and quick way to hide small problems on your face - this is a 24/7 pencil corrector that will hide everything you need. Apply it to the area under your eyes for a more open and rested look. Simply massage the corrector with your fingertips onto the areas where it is needed. All!

Popular

STEP 3

To ensure that the shadows lie well and do not crease, apply a creamy primer to your eyelids. You need very little product, but you need to distribute it carefully and evenly so that the entire eyelid is covered with a thin layer. Choose a primer with mother-of-pearl: it visually enlarges your eyes and makes your eyelid skin stunningly beautiful. By the way, you can stop here: primer - great alternative to the shadows!

STEP 4

If you are not a fan of half measures, move on to applying shadows. Try extraordinary shadows with a 3D effect! They are best applied with a finger, patting movements over the entire eyelid. If you want, take a pencil and highlight the edge of the eyelash with a light arrow.