You will need
Yarn (68% alpaca wool, 10% sheep wool, 22% synthetic fiber; 50 g/110 m) - 10 (11) 12 skeins of white; straight knitting needles No. 5 and 6; circular knitting needles No. 4,5, 5 and 6, 40 cm long.Patterns and schemes
Rubber
Alternately purl 2, knit 2. (1st row = purl row).Basic pattern
Knit according to the pattern.
2 p. with a tilt to the left
Knit 2 stitches together with a slant to the left: slip 1 stitch as in knitting, knit the next stitch and pull the removed loop through the knitted one.3 p. knit together
Knit 3 stitches together: knit 1 stitch and pull the next 2 stitches through the knitted loop.3 p. with a tilt to the left
Knit 3 stitches together with a slant to the left: slip 2 stitches as in knitting, knit the next stitch and pull the removed stitches through the knitted one.Add 1 p.
Make a yarn over, twist the yarn over in the next row and knit it behind the back wall.Knitting density
16p. x 24r. = 10 x 10 cm, knitted with the main pattern on needles No. 6.Attention!
The knitting density must correspond to the specified one, so before starting work you should definitely knit a sample. To do this, cast on 27 sts and knit 14 cm with the indicated pattern on the corresponding stitch. knitting needles Then count the loops in the middle section 10 cm long and compare with the data for the given knitting density. If there are more than 16 stitches on it, switch to thicker knitting needles, if less, go to thinner ones. The knitting density must correspond to the specified width, first of all.If the instructions indicate only one number, then it applies to all sizes.
Completing of the work
Back
On needles No. 5, cast on 98 (106) 114 stitches and knit with an elastic band = alternately purl 2, knit 2. (1st row = purl row).After 4 cm the next person. knit a row, while evenly decreasing the stitches so that 81 (87) 93 stitches remain on the knitting needles. Knit another 2 stitches. knit stitches, then switch to needles No. 6 and continue working with the main pattern according to the given diagram.
When the length of the part is 46 cm (finish the 8-dimensional pattern), begin raglan decreases:
1st row with decreases: knit 1, knit 3 stitches together with a slant to the left, knit with the main pattern until the last 4 stitches on the knitting needle, knit 3 stitches together, knit 1. In all subsequent purl. rows, purl 2 outer loops on both sides.
2nd row with decreases: knit 1, knit 2 stitches together with a slant to the left, knit with the main pattern until the last 3 stitches on the knitting needle, knit 2 stitches together, knit 1. These 2 r. repeat with decreases until 33 (33) 33 stitches remain on the needles.
Finish purl. next, knitting all the loops. Close on both sides on the outer loop, transfer the remaining loops to an auxiliary needle or thread.
Before
Knit like a back.Sleeves
On knitting needles No. 5, cast on 46 (50) 54 sts and knit with an elastic band = alternately purl 2, knit 2. (1st row = purl row).After 8 cm the next person. knit a row, while decreasing the stitches evenly so that 39 (45) 51 stitches remain on the knitting needles.
Knit 2 more p. knit stitches, switch to needles No. 6 and continue working with the main pattern according to the given diagram. In every 4-mr. add 1 stitch on both sides after/before the edge loop until there are 75 (81) 87 stitches on the needles.
When the sleeve length is 43 cm (finish the 8-measurement pattern), begin raglan decreases and perform them as described for the back.
Repeat 2 times. with decreases until 27 (27) 27 sts remain on the knitting needles Finish purl. next, knitting all the loops. Close on both sides on the outer loop, transfer the remaining loops to an auxiliary needle or thread.
Assembly
Execute side seams and sleeve seams - up to about 6 rubles. before the 1st raglan decrease = these 6 rubles. will be a continuation of the raglan seams. Sew raglan seams.Collar
Transfer the remaining stitches to circular needles No. 6 and knit all 112 stitches. Close the row and continue working in the circle with an elastic band = alternately knit 2, purl 2. When the width of the elastic is 4 cm, switch to knitting needles No. 5. When the width of the entire elastic band is 8 cm, continue working with knitting needles No. 4.5. If the elastic band is 22 cm wide, close the loops.Photo: Burda magazine. Creation" No. 3/2017
A gray pullover with a golf collar and voluminous arans will become your real favorite in the cold season.
Design: Lea Petaia
Sizes: 36(38)40(42)44(46)
To knit a sweater you will need:
Novita Isoveli yarn (75% wool, 25% polyamide, 65 m/50 g) – 800 (850) 900 (950) g light gray;
knitting needles No. 5 and No. 6;
circular knitting needles No. 6.
Rib 2x2: knit 2 knits alternately. p. and 2 p. P.
Facial surface: faces. rows - persons. loops, purl rows - purl. sang.
Knitting density: 15 p. x 19 rows = 10 x 10 cm.
How to knit a sweater with braids:
Before
On knitting needles No. 5, cast on 66(74)78(84)92(102) sts, knit with an elastic band, starting from the purl side. row, as follows: 2 purl. p. (2 purl. p.) 2 persons. p.‚ 2 p. p. (1 knit p.‚ 2 p. p.) 1 knit p.‚ 2 p. p. (2 knit p.‚ 2 p. p.), * 2 knit p.‚ 2 p. p. *, repeat from * to *.
At an elastic band height of 3 cm, mark the needles No. 6 and knit the faces in satin stitch, knitting a braid pattern in the middle according to pattern 1, as follows: 10(14)16(19)23(28) stitches. satin stitch, then perform ralrt A-D (= 46 sts), 10(14)16(19)23(28) stitches in satin stitch.
In a pattern of braids, repeat A-B and C-D rapport from the 1st to the 24th row, repeat BC from the 1st to 30th row.
At a height of 19(19)20(20)21(21) cm, for a fitted fit, decrease 1 stitch on both sides.
Repeat decreases every 7 cm 2 more times = 60(68)72(78)86(96) sts.
At a height of 38(39)39(40)40(41) cm, add 1 p on both sides. Repeat the addition after 6 cm again = 64(72)76(82)90(100) p.
1 time x 3(3)4(4)5(5) p.,
1(1)2(2)2(3) times x 2 l. And
1(2)1(2)3(2) times x 1 p. = 52(58)58(62)66(74) p.
At an armhole height of 8(9)10(11)11(12) cm for the neckline, close the middle 18(18)18(20)20(20) sts and then knit each side separately.
To round the cutout, close with inside in every 2nd row 1 time x 2 p. and 1 time x 1 p.
At an armhole height of 18(19)20(21)21(22) cm, close off the remaining 14(17)17(18)20(24) shoulder stitches.
Tie the other side of the neckline symmetrically.
Back
On knitting needles No. 5, cast on 62(70)74(80)88(98) sts and knit with an elastic band, starting from the purl side. row with 2 purl. p. (2 purl. p.) 2 persons. p. (1 knit. p., 2 p. p.) 1 knit. p., 2 p. p. (2 knit p.) * 2 knit p.‚ 2 p. p. *, repeat from * to *.
At the height of the elastic band 3 cm, change the knitting needles to No. 6 and knit. satin stitch, knitting a braid pattern in the middle according to pattern 2, as follows: 10 (14) 16 (19) 23 (28) stitches. stitch, repeat A-D (= 46 sts), 10(14)16(19)23(28) stitches in satin stitch. Repeat the braid pattern from the 1st to the 24th row.
At a height of 19 (19) 20 (20) 21 (21) cm, for a fitted fit, decrease 1 stitch on both sides.
Repeat decreases on both sides every 7 cm 2 more times = 56(64)68(74)82(92) sts.
At a height of 38(39)39(40)40(41) cm, add 1 stitch on both sides.
Repeat increments after 6 cm 1 more time = 60(68)72(78)86(96) sts.
At a height of 55(56)57(58)60(61) cm for the armholes, close on both sides in every 2nd row
1 time x 3(3)4(4)5(5) p.‚
1(1)2(2)2(3) times x 2 p. and
1(2)1(2)3(2) times x 1 p. = 48(54)54(58)62(70) p.
At an armhole height of 16(17)18(19)19(20) cm for the neckline, close the middle 20(20)20(22)22(22) sts and then finish each side separately.
At an armhole height of 18(19)20(21)21(22) cm, close the remaining 14(17)17(18)20(24) sts with each shoulder.
Left sleeve
On knitting needles No. 5, cast on 32 (32) 34 (36) 36 (38) sts, knit with an elastic band, starting from the purl side. ryatsa, next way: 1 purl. p.‚ 2 persons. p. (1 p. p., 2 knit p.) 2 p. p.‚ 2 persons. p. (1 knit. p.) 1 knit. p. (2 knit. p.)‚ *2 p. p.‚ 2 persons. p.*, repeat *-*.
At an elastic band height of 5 cm, change the knitting needles to No. 6 and knit the knits. satin stitch, knitting a braid in the center according to pattern 2, next. way: knit 9(9)10(11)11(12) stitches. stitch, repeat A-B (= 14 stitches)‚ knit 9(9)10(1 1)1 1 (12) stitches in knit stitch.
Repeat rows 1-24 in the pattern.
At a height of 9 (10) 7 (8) 6 (7) cm for sleeve bevels, add 1 stitch on each side.
Repeat the additions every 4.5(4)4(4)3.5(3‚5) cm another 7(8)9(9)11(11) times = 48(50)54(56)60(62) P.
At a height of 45(46)47(48)48(49) cm for the sleeve slope, close on both sides in every 2nd row
1 time x 3(3)4(4)5(5) p.‚
0(0)1(1)1(1) times x 3 p.‚
2(2)1 (1)1 (1) times x2 p.‚
8(9)9(10)11(12) times x 1 p. and
1 time x 2 p.
Close off the remaining loops.
Right sleeve
Knit symmetrically, but doing rapport C-D pattern from braids according to scheme 2.
Assembly
Sew shoulder seams.
For the collar along the edge of the neckline, cast on 80(84)84(84)88(88) sts on circular needles and knit 22(22)24(24)24(24) cm rubber in a circular pattern. Close the loops.
Perform seams
Educational video course of artistic knitting “Secrets Irish lace”
Carpet “Extravagant” – video master class 
TRAINING AUTHOR'S COURSE IN ARTISTIC KNITTING 
"150 ideas for exclusive knitted clothes» Zoe Woolwich
VIDEO COURSE “Everything best for children» Part 1 (for boys) VIDEO COURSE “All the best for children” Part 2 (for girls)
VIDEO COURSE OF BRAIDS AND BRAIDS without “jambs” 
VIDEO COURSE “For beloved men”
VIDEO COURSE “I will knit myself a dress...” 
VIDEO COURSE “Secrets of working on the BROTHER CK-35 machine” 
VIDEO COURSE “Working on the machine SILVER REED SK – 280/SRP 60N” 
VIDEO COURSE “BASICS OF OPERATING THE SILVER REED SK 840/SRP60N” 
VIDEO COURSE “Calculation and knitting finished product”
VIDEO COURSE “Machine knitting for beginners” 
VIDEO COURSE “Working on the BROTHER KH-868/KR-850 machine” 
VIDEO COURSE “Working on the BROTHER KH-970/KR-850 machine” 
VIDEO COURSE “Working on the BROTHER KH-940/KR-850 machine” 
VIDEO COURSE “Calculation and knitting of the finished product-2”
Size: 42/44 (46/48)
Materials:
- A total of 240 g Vita “Sapphire” (4 5% laster wool, 55% acrylic; 250 m/100 g), of which: 100 g dark brown (1504), 70 g white (1501), 70 g red -brown (1521);
- 300 g of yarn “Natasha PS” (50% wool, 50% acrylic; 250 m/100 g) olive color;
- knitting needles No. 3.5 and No. 4.5;
- circular knitting needles No. 3.5.
On the knitting needles: knit stitches (knit stitches), purl loops (purl stitches), knit stitch (knit stitch, purl row, purl stitch), elastic 2/2 (alternately 2 knit stitches, 2 purl stitches), elastic 9/1 (alternately 9 knit stitches, 1 purl stitch), jacquard pattern: knit according to pattern No. 1 and No. 2.
Jacquard pattern No. 2: knit according to the pattern; “braid” pattern (6 sts): 1st row: cross 6 sts to the left, leave 3 sts on auxiliary knitting needle, thread before work, knit 3 knits. p., then 3 persons. p. from an auxiliary needle.
Rows 2-4: stockinette stitch.
Repeat from the 1st row.
Knitting density: 14 p. x 18 r. = 10 x 10 cm, knitted on knitting needles No. 4.5. satin stitch thread in 2 folds.
Description of knitting a sweater with a golf collar
Back
Using “Natasha PS” olive-colored yarn in two plies on knitting needles No. 3.5, cast on 56 sts (71 sts) and knit 12 rows with a 2/2 rib. In the last row, add 1 stitch.
On knitting needles = 57 sts (72 sts).
Switch to knitting needles No. 4.5. Join Vita “Sapphire” yarn in two plies and knit 57 rows according to the diagram jacquard pattern No. 1. Next, continue the work with “Natasha PSh” olive-colored yarn.
Before
Using “Natasha PS” olive-colored yarn in two plies on knitting needles No. 3.5, cast on 56 sts (71 sts) and knit 12 rows with a 2/2 rib. In the last row, add 1 st. On knitting needles = 57 sts (72 sts).
Switch to knitting needles No. 4.5. Attach Vita “Sapphire” yarn in two folds and knit 57 rows according to the pattern of jacquard pattern No. 1. Then continue the work with olive-colored “Natasha PS” yarn.
In the 58th row from the beginning of the jacquard pattern, distribute the loops as follows: 1 chrome. p., * 6 p. braid pattern, 11 p. stockinette stitch * repeat from * to * 2 times, 6 p. braid pattern, 1 chrome. p. and knit 45 rows according to the distributed loops.
To decorate the neckline in the 36th row from the jacquard pattern, close the middle 11 p. (18 p.) and on both sides of them in each 2nd row 1 time for 3 p., 2 times for 2 p., 1 time 1 p. each
On knitting needles = 15 sts (19 sts).
In the 104th row from the beginning of the jacquard pattern, bind off all the loops in one row.
Perform the left shoulder in the same way.
Right sleeve
Using “Natasha PS” olive-colored yarn in two folds on knitting needles No. 3.5, cast on 40 sts (48) and knit 14 rows with a 2/2 rib. In the last row, add 1 st. On knitting needles = 41 sts (49 sts). Switch to knitting needles No. 4.5. Join Vita “Sapphire” yarn in two plies and knit 51 rows according to jacquard pattern No. 2.
Next, continue the work with olive-colored “Natasha PS” yarn and knit 24 rows with a 9/1 rib.
To expand the sleeves, from the 23rd row from the beginning of the jacquard pattern, add 1 stitch in every 6th row, then 1 stitch in each 8th row 7 times.
On knitting needles = 57 sts (65 sts).
In the 74th row from the beginning of the elastic band 9/1, bind off all the loops in one row.
Left sleeve
Knit like the right sleeve.
Assembly and finishing
Sew shoulder and side seams. Sew seams on sleeves. Sew the sleeves into the armholes.
Golf collar
Using “Natasha PS” olive-colored yarn in two folds along the neckline on circular knitting needles No. 3.5, cast on 60 sts (68 sts) and knit 50 rows with a 2/2 rib.
In the 51st row from the beginning of work, close all the loops in one row.
Gaiters
Size: arbitrary.
Materials:
- A total of 110 g Vita “Sapphire” (45% laster wool, 55% acrylic; 250 m/100 g), of which: 50 g dark brown (1504), 30 g white (1501), 30 g red brown (1521);
- 150 g of yarn “Natasha PS” (50% wool, 50% acrylic; 250 m/100 g) olive color;
- knitting needles No. 3.5.
On the knitting needles: knit stitches (knit stitches), purl loops (purl stitches), knit stitch (knit stitch, purl row, purl stitch), elastic 2/2 (alternately 2 knit stitches, purl 2 stitches); jacquard pattern: knit according to the pattern.
Knitting density: 21 p. x 20 r. = 10 x 10 cm, knitted on knitting needles No. 3.5. satin stitch thread in 2 folds.
Description of knitting leg warmers
Using “Natasha PS” olive-colored yarn in two plies on knitting needles No. 3.5, cast on 58 sts and knit 30 rows with a 2/2 rib. Join Vita “Sapphire” yarn in two plies and knit 83 rows according to the jacquard pattern. Cut off the Vita “Sapphire” yarn, continue working with olive-colored “Natasha PSh” yarn and knit 30 rows with a 2/2 rib.
In the 195th row from the beginning of work, close all the loops in one row.
Dimensions: 86-92 (98-104) 110-116. Differing data large sizes are given in brackets and, accordingly, outside brackets.
You will need: yarn (100% extrafine merino wool; 105 m/50 g) 250 (300) 350 g yellow-lilac-coral-beige; knitting needles No. 5; short circular needles No. 5; hook No. 4.5.
Pattern 1: front stitch = front rows - front loops, purl rows - purl loops; In circular rows, knit all stitches.
Pattern 2: purl stitch = knit rows - purl loops, purl rows - facial loops; In circular rows, purl all stitches.
Pattern 3: elastic = alternately 1 knit, 1 purl.
Pattern 4: relief pattern on 14 loops = knit according to the knitting pattern. It shows the front rows; in the purl rows, knit the loops according to the pattern. Start with loops from the corresponding arrow, repeat the rapport constantly, finish according to the picture. Repeat rows 1-48 constantly.
Knitting density: relief pattern - 19.5 p. x 27.5 r. = 10 x 10 cm.
Back: cast on 62 (70) 78 stitches on knitting needles, knit 1 cm with an elastic band, while in the last row add 1 st. Next knit between edge loops with a relief pattern, starting at arrow A (B) C. After 33 (38) 43 cm from the elastic band, close the middle 19 (23) 27 p. for the neck. Finish the shoulders separately, while closing along the edge of the neck in every 2nd row 1 x 3 p. and 1 x 2 p. After 35 (40) 45 cm from the elastic band, directly bind off the remaining shoulder loops.
Before: knit the same as the back, but with a deeper neckline. To do this, after 28 (33) 38 cm from the elastic band, close the middle 15 (19) 23 p. Finish the shoulders separately, while at the edge of the neck close in every 2nd row 1 x 3 p., 1 x 2 p. and 2 x 1 p. At the height of the back, directly bind off the remaining shoulder loops.
Sleeves: cast on 30 (32) 34 loops on the knitting needles for each sleeve, knit 1 cm with an elastic band, while adding 1 stitch in the last row. Next, knit between the edge loops with a relief pattern, starting at arrow D (E) A. At the same time, add from the elastic for bevel the sleeves on both sides according to the pattern alternately in every 2nd and 4th row 18 (20) 22 x 1 p., then in every 2nd row add 1 (2) 3 x 1 p. After 21 (24) 27 cm from the elastic band, close the loops directly.
Assembly: Lightly moisten the parts, stretch them according to the dimensions indicated in the pattern, pin them onto the pattern and leave until completely dry. Sew shoulder seams. Crochet the neckline in 1 round row, st. b/n. Cast on 70 (86) 92 sts on circular needles along the edge of the neckline, catching only the outer wall of each stitch. Work 8 cm in circular rows using stockinette stitch and 1 cm in ribbing. Close the loops according to the drawing. Sew in the sleeves so that the middle of the sleeve coincides with the shoulder seam. Sew side seams and sleeve seams. When finished, lightly steam all seams.