Lightweight and stylish balls of thread are a great base for home decor. This craft can be an excellent preparation for original New Year's toys. Do air decoration it won't be difficult to do it yourself. Step-by-step master class with a photo will allow you to get a good result the first time, and the video below will help you avoid mistakes in your work. A thread ball, made in an unusual and stylish way, can be hung, used to create a lampshade, or come up with something else. This preparation will definitely not go unused!

Required materials and tools

To make a ball of thread with your own hands, you will need the simplest and most common materials, the purchase of which will not cost a lot of money. Some of them are always at hand. So what should you use? For the craft you will need:

• threads (it is better to take natural ones - from viscose or cotton, for example, as they absorb glue well);
• 1 jar of PVA glue;
• several balloons;
• a long and thick needle, often called a gypsy needle;
• stationery knife;
• petrolatum;
• glue container;
• scissors;
• napkins to wipe off excess glue.

Master class on making balls from threads

The process of creating a ball of thread is extremely simple and does not take much time. Understandable step-by-step instruction will allow you to do everything quickly and without mistakes. The main thing is to follow the suggested recommendations for making crafts.

Step 1- You need to stir the glue. In a specially prepared container, PVA glue is mixed with water in accordance with the attached instructions. The liquid should be fairly uniform in consistency.

Step 2- Now we need to inflate the balloons. They should be the size you plan to create. ready product. Balls can vary in volume. It all depends on how you plan to use them later.

On a note! The main thing is that the ball must be of the correct spherical shape. To obtain such a blank, you first need to inflate the ball to the maximum and shape it, gradually deflating the air.

Step 3– Next you need to thread the needle. Then the thread is placed in PVA glue. But it’s better to do this in portions, which is more convenient for work. The thread is soaked in glue, and its remains are removed with your hands or a napkin. It’s good if you have an assistant to make a light ball. Let someone wet the thread, and someone wind it around the ball.

Step 4- Now you need to wind the thread on balloon. To ensure that the workpiece can be removed well later, you can wrap the ball with cling film and lightly grease it with Vaseline. There is no need to make a drawing on the ball in advance. The thread should be wound in a chaotic manner. The skeins should be evenly distributed over the entire surface of the ball. You should act so that the thread fits snugly and tightly to the base. The needle can be removed: it will no longer be needed. There is no point in saving material. The more thread you use, the more delicate and attractive the ball will be.

Note! When the yarn runs out, you can string several beads onto its tip. This will give the finished product original motifs.

Step 5– When the threads run out, you need to cut them with scissors or a stationery knife. The tip should be secured to the ball with glue.

Step 6“Now we just have to wait for the balls to dry.” This is the longest stage as it takes from 12 to 24 hours. To prevent the ball from losing its shape and size, you should hang it for this time or place it on a tray. It is optimal to make the balls in the evening and leave them overnight. So, in the morning you can continue the lesson on creating an original airy decor.

Step 7– When the ball has frozen and become elastic, but very hard, it is necessary to pierce the workpiece in several places with a needle. Before doing this, it is recommended to manually slightly separate the ball from the thread through the gaps in the threads. This will avoid deformation of the product when the inner part is deflated.

On a note! If the balloon is stuck in places, you can use tweezers.

Step 8– What else remains to be done? You can use various decorations to decorate the finished ball of thread. If you decide to use the blank in the future to create a New Year's toy, you can use sequins, sparkles, broken glass, and beads as decoration. You can always do something truly bright and unusual.

That's all! The web ball is ready!

What can you do with ready-made spider web balls?

If you decide to make it from a blank Christmas decoration on the Christmas tree, then it is worth supplementing the composition with auxiliary elements. Glitter, which is usually used in manicure, fits perfectly into the concept. You can also decorate a ball of threads with beads, coffee beans, ribbons, serpentine, rhinestones and other decorative fragments.

When glitter is used as decoration, it is enough to lightly coat the entire structure with a brush, dip it in PVA glue, and sprinkle it with decor. If fairly heavy elements are used, then it is rational to use a glue gun.

Since the New Year's ball made of threads will decorate the Christmas tree, it needs to be made into a loop. To do this, you need to thread a ribbon or lace through the openwork weave and tie it into a knot, hiding the “ugliness” inside. You can complement the composition with a satin or brocade ribbon.

If a ball of thread is made to decorate the interior, then you can supplement it with artificial flowers made of fabric, foamiran or other material. The photo shows several interesting ready-made options that you can focus on while doing the work.

Video: how to make balls of thread with your own hands

Making a ball of thread with your own hands is not difficult at all. Videos and photos will help beginners in their work. The result will be a bright, delicate and openwork non-trivial decoration that will certainly be used in the interior or as part of decorating a Christmas tree.

DIY postcard for May 9th for veterans from children - master class with photos and videos. How to make from paper voluminous postcard on Victory Day Application for February 23rd in kindergarten and school: master classes with photos and videos. Options for applications for dad on February 23rd for children 3-4 years old and older

Evgenia Smirnova

To send light into the depths of the human heart - this is the purpose of the artist

Content

Many of us already know how to make a ball of thread. school lessons labor training in primary school. With the help of such a thread ball you can decorate any room, adding a touch of originality and warmth to it. In addition, a hand-made and unusually decorated thread ball can be an excellent gift for your family and friends. That's why your favorite site useful tips the site will tell you how to make a ball of woven thread with your own hands.

So, to make an original ball of thread you will need:

• threads - give preference to natural ones, for example, cotton or viscose, which absorb glue well;
• a thick long needle, which is also called a gypsy needle;
• a jar of PVA glue;
• balloons;
• napkins for wiping off excess glue.

Step-by-step instruction:

First, inflate the balloons. Inflate them to the size you want your yarn balls to be in the future. You can make balls of different sizes, depending on how you plan to decorate them in the future.

Thread the thread into the needle. Use a needle and thread to pierce the tube of glue. The thread, passing through the glue, will be saturated with it. Now you can remove the needle, we won't need it anymore.

Each balloon should now be wrapped with thread soaked in PVA glue. Try to ensure that it fits tightly to the surface of the ball. Wrap tightly, use more thread, don't skimp. When you wind the last layers of thread into the thread, already at the exit from the jar of glue, you can thread beads that will add originality to your ball. But leave this step at your own discretion.

After all the threads are wound around all the balls, the most difficult thing remains - wait until the glue dries. It is best to make such ball blanks in the evening, then you can go to bed with peace of mind, and in the morning the ball blanks will have time to dry completely, and you can proceed to the next step of the instructions.

Using a needle, burst the balloons, and carefully remove the remains through the hole in the thread ball. If you want to use the balloon again, simply untie the thread that was tightening the inflatable hole, deflate the air and carefully remove the deflated balloon. The spider web balls are ready. Now you can decorate them to your taste and decorate your room with them.

To refresh your usual interior or decorate your home for the holidays, you don’t have to make expensive purchases. Spider web balls always look impressive as pendants, craft items, New Year's toys, vases and even chandeliers. Let's look at a simple way to make a ball with your own hands from threads and glue.

The essence of making a cobweb craft is the technique of wrapping a ball shape with threads soaked in an adhesive composition. The glue dries, the base is removed - the decoration is ready. Then the ball can be cut or decorated, combined into groups to create a composition, etc.

A few secrets to successfully making spider web balls

In order to make a ball of thread, first of all, you need to select suitable materials: yarn, glue, mold, glue container, brush, and prepare a work place.

There are a few simple rules to keep in mind:

1. How thinner than thread(for example, sewing), the faster and more likely the finished product is deformed. To avoid this, they should only be used for small balls (less than 8 cm in diameter). For crafts bigger size thicker threads are needed (floss, yarn, twine, etc.) because they hold their shape better.
2. Still, if you have to do volumetric decoration made of thin threads, they should be applied quite tightly and, in addition to glue, secured additionally (for example, with hairspray or construction clear varnish).
3. To make a web ball you need liquid glue. Silicate and PVA are suitable. (sold in tubes) is more liquid, construction (in cans) is thicker and therefore “holds stronger.” Secondary glue, like hot glue, is not suitable at all.
4. The threads should be dipped entirely before applying to the mold. This can be done in two ways. In the first case, the thread will be dipped into glue poured into an open container. In the second, go right through the jar of glue, through the opposite holes at its bottom. The “correct” holes in the tube are slightly larger than the thickness of the thread (it is well wetted by glue), but the contents of the container do not leak onto the desktop.
5. There is no need to insert candles inside the craft or install it in a room with high humidity. In the first case, the ball can easily catch fire, in the second, it can lose its shape and “go limp.” In order not to give up the idea of ​​installing lighting inside the ball, we recommend choosing battery-powered LED bulbs.

Detailed instructions for making balls from threads

Let's look at the whole process step by step. It is simple, and it can only take 15-20 minutes to get the first piece.

Step 1. Let's choose a base. To do this, they most often use balloons of different diameters or fingertips (sold in pharmacies) for small crafts. They are good because at the end of the work you can simply take them out: pierce them and, after the air has escaped, take them out through the gap without damaging the thread form.

More dense bases: rubber balls and foam balls (used most often for topiary) - perfectly rounded than inflatable forms. But at the same time, they are more difficult to extract at the final stage.

Step 2. Let's prepare the form. The base that will be tied with threads should easily come away from the adhesive layer of the product after drying. To do this, the entire form should be coated with petroleum jelly or oil (from a pharmacy), or liquid silicone (inexpensive, in small jars or in the form of a spray, which is much more expensive, can be purchased at sports equipment or auto cosmetics stores). It is better to remove excess lubricant with a napkin so that the yarn does not slide off the surface during operation.

Step 3. We wrap the base. Apply threads well soaked in glue onto the ball randomly. It is advisable to do this so that the threads do not intersect in one place more than 2 times. You shouldn’t put too much tension on the winding (especially on an inflatable base), but nothing should sag either. In places where there is not enough glue, you need to apply it additionally with a brush.

Step 4. Drying. At this stage of work, you need to let the entire craft dry. To do this, it is advisable to hang it in a dry and warm place so that it does not touch any surface (otherwise it will stick). Depending on the size, thickness of the winding and humidity, the product can dry up to two days. To get the finished result much faster, you can use a hairdryer.

Step 5. We take out the base. After the ball is completely dry, you need to remove it from its original shape. If it is a balloon, it is usually pierced and removed through any suitable hole.

Step 6. We decorate. Any fairly light materials are suitable for decorating cobweb balls. These can be applications or inscriptions made of paper, beads, rhinestones, sequins, ribbons, etc. Balls collected in a group look impressive. For example, for a New Year's wreath or garland.

The filling in the balloons will look beautiful: large beads, tinsel, serpentine, foil, confetti, etc. If necessary, the product can be painted. Aerosol paints are best for changing colors. With their help it is easy to get shiny or matte gold and silver balls.

Advice! Hot glue is best for attaching jewelry: it is transparent, hardens quickly and gives a very strong connection.

Several interesting options for crafts made from spider web balls

A fairly dense ball of thread and glue can be used for topiary or other types of crafts. The main thing that fragile base withstood additional elements decor. Let's look at the technique of performing some of them.

Snowman

You will need:

• three different-sized balls of white (or blue) yarn,
• buttons for eyes,
• cone of orange paper for the nose,
• twigs for hands,
• round pieces of cotton wool for feet,

To assemble a pyramid of balls - a blank for a future toy - you need to lightly press bigger ball on both sides to make neat dents. Glue a medium-sized ball to one of them, place the other on the work surface. The third part (the head) is also attached.

All remaining parts are glued onto the finished base. At the end, you can knit a bright yarn scarf.

Advice! To make even indentations on the ball, lightly moisten the area with a wet brush.

Topiary - “tree of happiness”

To make it you need:

• one ball (“crown” of the tree),
• a small pot with filler (pebbles, coffee beans, beads, etc.) to “plant” our “plant”,
• wooden or wire stick for the “trunk”,
• glue,
• decorations (“leaves” and “flowers”).

Making topiary is not so difficult: just assemble the frame (attach the ball to the stick), install the “trunk” in the pot, fill it with filler and decorate.

Most often, flowers made of crepe paper, bows made of satin ribbons, coffee beans, beads, strips of quilling paper and much more are used for the “crown”. All this is attached with hot glue using a gun.

Flowers

It's very easy to make them. All you need is to cut the petals along the diameter of the ball using cloves. One ball produces 2 identical pieces. You can decorate flowers with beads, beads, wire “stamens”, etc.

Birds, animals

Since these crafts are very simple, they are perfect for competitions in kindergarten or to decorate the Christmas tree. To make them, you need paper blanks of “wings”, “paws”, “tails”, “tufts”, etc., which are glued to the “body” - a ball of thread.

Vase or bowl

To make a vase or deep plate from a spider web ball, you need to carefully cut it in half. For the bottom, you need to slightly moisten the lower part and press it inward. When the product dries again, it will retain its desired shape.

To make the hemisphere of threads stronger, it is recommended to coat it on both sides with colorless varnish. True, such an item can only be used for decorative purposes: it will not withstand moisture and significant load. But at the same time it will become the highlight of any interior.

Comfort in the home is an important component of everyday life. A warm atmosphere is often created by small and inconspicuous at first glance details, which together give that long-awaited feeling of comfort. And you create comfort in the home with your own hands. You can, of course, use the services of a designer. Or you can create an interesting design using the things you have at hand: glue and thread, giving an original color to the interior of your home. Once you learn how to make a thread ball, it's not difficult.

How to quickly make balls of thread with your own hands?

Hanging thread balls will look beautiful and unobtrusive in the house. They can be made in any color and size. They will fit harmoniously into the interior if you hang them on a cornice or in a chill out corner, decorate the space around the dining table or on the loggia.

In addition, such an interior detail will cost you mere pennies, and the time spent on manufacturing the elements will be spent to a minimum. Similar balls are great way Decorate the room for the holiday as quickly as possible. But not only that - it’s also easy to use threads to make a new lampshade or shade for an old and boring chandelier.

New Year's decorations in the form of balls made of thread and glue

A quick and optimal way to please family and friends New Year's atmosphere- this is to create a snowman, at the same time - absolutely without snow! So, how to make a snowman out of threads and balls and what will you need for this?

To make it yourself, prepare:

Step 1

We inflate the balloons. All three should be different sizes, and the last two (for the hands) should be smaller than the others.

Step 2

We degrease the surface of the balls so that the thread on the glue does not slip and lags behind well when removing the base.

Step 3

Pour glue into the container.

We pull the threads through it so that the entire surface of the fiber is sticky.

Gradually wrap the balls tightly in a circle on all sides.

Step 4

Hang to dry. At this time, you can sprinkle them with glitter and varnish them.

Step 5

Slowly, so as not to disturb the fragile structure, we deflate the balls and remove them from the thread spheres. We connect them together with the same glue.

Step 6

We glue eye beads to the top of the snowman, and we attach button beads along the snowman's body.

Ready!

Making a Christmas snowman decoration with your own hands is as easy as shelling pears, and you can place it anywhere: place it on a Christmas tree, put it on a windowsill, or hang it at the entrance to your apartment. Fast and original decor at no extra cost!

How to quickly make a chandelier from threads and a ball?

In addition to the snowman, with the help of glue and improvised materials, you can also update the permanent decor in the house. For example, you can make a new chandelier for your bedroom or living room with your own hands.

For this you will need:

So, let's make a chandelier:

1. Inflate the balloon as much as possible. The lampshade will look more impressive if it turns out voluminous and does not get lost in the general background.
2. Pour some glue into the container.
3. We thread the thread through the needle and pull it through the glue with the entire surface of the fiber.
4. Wrap the ball tightly with thread.
5. We leave it hanging to dry.
6. We deflate and separate the fragile frame.
7. We hang the chandelier on the light bulb and, voila, the new lamp is ready!

It is worth noting that such a chandelier can be made not only as a wall lamp - such a lampshade also looks cozy on a bedside lamp. Additionally, multi-bulb ceiling lights can also be updated in the same way. However, in this case the lampshades should be small in size.

However, there are a few tips on how to make a chandelier correctly:

How to make a lampshade from threads and a ball?

Many people still have a good old floor lamp in their home. The light it emits is diffused and warm, but the lampshade is already pretty worn out. Buying a new one is expensive, and there is no point. Therefore the most effective method to improve an old floor lamp is with the help balloon and glue to create a new lampshade with your own hands.

To do this, you will still need a little thick glue, a degreaser (can be replaced with Vaseline), a large needle, a container and a balloon (but in this case you can use not only a round one, but also a pear-shaped one. And avid lovers of romance can take the balloon into heart-shaped).

Useful tips

Snowmen made of threads

You can create very beautiful crafts from ordinary threads.

For the New Year, it is customary to decorate the Christmas tree with various toys. From threads and glue you can make such popular Christmas tree decorations as balls.

In addition, threads and glue can be used to create Christmas trees of different colors and sizes, and to make the picture complete, you can put a snowman near the Christmas tree, which can also be made from threads.

On our website you will also find:

• DIY New Year's monkey craft
• DIY Christmas balls
• How to make a Christmas tree with your own hands

Shiny ball made of thread and PVA glue

You will need:

Several balloons

PVA glue

White thread

Sequins

Small bowl.

1. Pour PVA glue into a bowl and dilute it with a small amount of water.

* If the glue runs out and you are not finished yet, you can add more water.

2. Inflate the balloons. Their size directly affects the size of your future New Year's balls.

3. Prepare a white thread, tie one end to the tail of the ball and start wrapping the thread around the entire ball. Cover the surface of the ball as much as possible.

4. Dip the ball wrapped in thread into a bowl of PVA glue and water and start turning it so that the glue is absorbed into the thread from all sides.

5. Before the glue dries, sprinkle glitter on the ball.

6. So that the ball can dry, you can hang it on a stretched thread using a paper clip or place it on a jar (without a lid).

7. After 24 hours, remove your Christmas decoration and use scissors or another object to burst the ball inside. Carefully pull out the ball; it will be slightly glued to the thread.

* By making several of these shiny balls, you can decorate your Christmas tree or interior. If you get a few branches, you can hang New Year's balls on them, decorating the branches with tinsel.

DIY Christmas balls made of threads

You will need:

Air balloons

Thick threads (for knitting, for example)

PVA glue

Plastic bowl or cup for glue (or other container that you can poke a couple of small holes in)

thick needle

Scissors.

1. Inflate the balloon to the desired size and tie a tail. If you want to make it more round, press it down with your hands.

2. Use a needle and thread to pierce a plastic bowl or cup. This should be done as close to the bottom as possible. You can also simply dip the thread into a container of glue.

3. Pour PVA glue into a container and dilute it with a small amount of water to save glue.

4. Slowly pull the thread through the glue container and begin to wind the ball with it. Since you will be removing the ball after the glue dries, it is better to leave a little space near the tail in advance to pull it out.

5. Once you have wrapped the ball tightly, cut the thread. You can leave a small tail to make a loop and hang the ball on the Christmas tree, for example.

6. Leave the ball to dry. The natural way it will take 24 hours or a little more. You can speed up the process by placing the ball near the radiator or drying it with a hairdryer.

7. When the glue has completely hardened on all sides, pierce the ball and carefully pull it out.

8. If desired, you can decorate the ball. Try painting it, gluing plastic or paper snowflakes, sequins, or covering it with sparkles.

Another option:

How to make a ball of thread: gift wrapping

You will need:

Large ball of thread

Acrylic paint and brush

PVA glue

Screwdriver

Scissors or utility knife

A long piece of tape.

1. Inflate the balloon and wrap it with thread as tightly as possible. In some places, add a little PVA glue to secure the thread.

* The main thing is to wrap the ball so that nothing is visible through the thread. You can cover all the threads with a thin layer of PVA glue.

2. Apply with a brush acrylic paint on the thread. You should not skimp on paint, because in addition to color, it also holds the threads together well.

3. Hang the ball to dry overnight. If you have nowhere to hang it, you can put it on the neck of the jar.

4. When the paint has dried, burst the ball and pull it out of the “cocoon”.

5. Cut the resulting cocoon in half using scissors or stationery knife. To make this easier, wrap the ball with one thread of a contrasting color and start cutting along this line.

6. Using a screwdriver, make several symmetrical holes on both sides of the cocoon.

7. Place gifts wrapped in beautiful paper inside.

8. Pull the ribbon crosswise through the holes and tie it in a bow at the end.

New Year's balls made of thread: foam ball with jute rope

You will need:

Styrofoam ball

Jute rope

PVA glue

Decorations.

1. Wrap with jute rope foam ball, attaching it with PVA glue.

2. Decorate the balloon as you like. Use sparkles, stickers, sequins.

You can make a Christmas tree in the same way, only instead of a ball you use a foam cone.

Balls of thread (video)

Option 1.

Option 2.

DIY thread balls (photo)

Christmas tree made of threads. Option 1.

You will need:

Scissors

Regular tape

PVA glue

Decorations.

2. Wrap the cone in cling film or wide tape.

3. Pour PVA glue into a bowl (you can dilute it with a little water).

4. Dip the thread into the bowl of glue and begin wrapping it around the cone, starting from the top of the head. The thread should not be squeezed too hard - there should be enough glue left on it to attach well to the cone.

5. Leave the craft for 24 hours to allow the glue to dry, or you can use a hair dryer to speed up the process.

6. After the glue has dried, carefully remove the thread tree from the cone.

7. You can start decorating your Christmas tree. Any decorations are suitable for this - sparkles, sequins, buttons, beads, pompoms, etc. You can also place an electric candle under the tree to make it look even more beautiful.

DIY thread tree. Option 2.

You will need:

Scissors

Cling film or wide tape

Regular tape

PVA glue

Garland with lights.

1. Make a cone out of paper. Make small cuts at the bottom, leaving 2 cm between them. The cuts are needed so that you can stretch the thread between them.

2. In a bowl, dilute PVA glue with water.

3. Begin to saturate the thread with glue and wrap it around the cone, threading the thread through the cuts and wrapping the entire cone. Leave the glue to dry.

4. When everything is dry, carefully remove the string tree from the cone. To make this easier, cut off the edge of the base of the cone (where the cuts are). Start slowly turning the cone until it comes unstuck.

5. Glue, sew or staple the ribbon to the bottom of the tree.

6. Place a garland of lights inside the tree. If the light bulbs are small, they can be secured inside the tree using thin wire or Christmas decorations, which have wire fastenings. You can also use paper clips.

Here is another photo instruction:

Beautiful white Christmas tree made of threads. Option 3.

How to make a knitted Christmas tree from threads for the New Year